Evaluation of peri-implant bone metabolism under immediate loading using high-resolution Na18F-PET

Influence of the use of autogenous bone particles to close the access window after maxillary sinus floor augmentation: a micro-computed tomography and positron emission tomography study in rabbits

AIM

The purpose of this study was to evaluate using microCT and positron emission tomography (PET) analysis, the influence on bone healing of the placement of particulate autogenous bone in the antrostomy, and in the subjacent region after maxillary sinus elevation with xenograft.

MATERIAL AND METHODS

The sinus mucosa was elevated in sixteen male New Zealand rabbits and they were both grafted with a collagenated cortico-cancellous porcine bone. The antrostomy and the near subjacent region were filled with either the same xenograft (control site) or with particulate autogenous bone (test site) harvested from the tibia. The antrostomies were covered with collagen membranes. MicroCT (measured in Hounsfield Units) and microPET (kBq/cm3) using sodium fluoride infiltration (18F-NaF) were performed at the time of euthanasia that was performed after 1 and 8 weeks of healing, using 8 animals in each group. The Wilcoxon test was used for analysis.

RESULTS

At the microCT analysis, after 1 and 8 weeks of healing, no statistically significant differences were found between groups. Bone increased and xenograft decreased significantly between the two periods of healing. At the microPET analysis, the percentage of bone increased significantly over time in both test and control groups and no significant differences were found between groups.

CONCLUSION

The placement of autogenous bone in the antrostomy and the subjacent region after maxillary sinus elevation did not enhance bone formation compared with sites where only xenograft was used. Both microCT and microPET showed increase bone formation over time.

Surface Coatings of Dental Implants: A Review

Replacement of missing teeth is possible using biocompatible devices such as endosseous implants. This study aims to analyze and recognize the best characteristics of different implant surfaces that ensure good peri-implant tissue healing and thus clinical success over time. The present review was performed on the recent literature concerning endosseous implants made of titanium, a material most frequently used because of its mechanical, physical, and chemical characteristics. Thanks to its low bioactivity, titanium exhibits slow osseointegration. Implant surfaces are treated so that cells do not reject the surface as a foreign material and accept it as fully biocompatible. Analysis of different types of implant surface coatings was performed in order to identify ideal surfaces that improve osseointegration, epithelial attachment to the implant site, and overall peri-implant health. This study shows that the implant surface, with different adhesion, proliferation, and spreading capabilities of osteoblastic and epithelial cells, influences the cells involved in anchorage. Implant surfaces must have antibacterial capabilities to prevent peri-implant disease. Research still needs to improve implant material to minimize clinical failure.

The Diagnostic Value of Fluorine-18 Fluorodeoxyglucose Positron Emission Tomography/Computed Tomography for the Detection of Surgical Site Infection after Spine Surgery

STUDY DESIGN

Retrospective case series.

OBJECTIVE

The purpose of this study was to assess the diagnostic yield of fluorine-18 fluorodeoxyglucose positron emission tomography/computed tomography (F-18 FDG PET/CT) for surgical site infection (SSI) after spine surgery.

SUMMARY OF BACKGROUND DATA

Diagnosis of SSI in the spine based on F-18 FDG PET/CT requires experienced nuclear medical physicians for a detailed analysis of F-18 FDG distribution pattern. It has also been reported that increases in the maximal standardized uptake values of F-18 FDG (SUVmax) closely correlated with SSI, suggesting potential of more objective and quantitative diagnosis.

METHODS

We assessed the diagnostic yield of F-18 FDG PET/CT (pattern-based diagnosis by nuclear medical physicians and SUVmax-based diagnosis) for SSI in 52 subjects who underwent spine surgery. The 52 subjects included 11 nonimplant and 41 implant cases. F-18 FDG PET/CT was performed in 33 and 19 cases in early (≤12 weeks after the surgery) and late (>12 weeks) phases, respectively. The final diagnosis of SSI was based on the results of pathogen identification, plain radiography, and CT and/or magnetic resonance imaging or response to antibiotics and/or reoperation.

RESULTS

SUVmax-based diagnosis was performed with a cut off value of 5.0 as determined by receiver operating characteristic analysis. Both pattern-based and SUVmax-based diagnoses demonstrated excellent diagnostic yields with high sensitivity (97% and 90%), specificity (100% and 100%), and accuracy (98% and 94%). High diagnostic yields (accuracy of ≥90%) were consistently observed irrespective of presence or absence of implantation or interval between surgery and F-18 FDG PET/CT.

CONCLUSION

F-18 FDG PET/CT can be the procedure of choice for investigation of SSI in the spine when other imaging fails to provide a definitive diagnosis.Level of Evidence: 4.

Improved osseointegration using porcine xenograft compared to demineralized bone matrix for the treatment of critical defects in a small animal model

BACKGROUND

Autograft (AG) is the gold standard bone graft due to biocompatibility, osteoconductivity, osteogenicity, and osteoinductivity. Alternatives include allografts and xenografts (XG).

METHODS

We investigated the osseointegration and biocompatibility of a decellularized porcine XG within a critical defect animal model. We hypothesized that the XG will result in superior osseointegration compared to demineralized bone matrix (DBM) and equivalent immune response to AG. Critical defects were created in rat femurs and treated with XG, XG plus bone morphogenetic protein (BMP)-2, DBM, or AG. Interleukin (IL)-2 and IFN-gamma levels (inflammatory markers) were measured from animal blood draws at 1 week and 1 month post-operatively. At 1 month, samples underwent micro-positron-emission tomography (microPET) scans following 18-NaF injection. At 16 weeks, femurs were retrieved and sent for micro-computerized tomography (microCT) scans for blinded grading of osseointegration or were processed for histologic analysis with tartrate resistant acid phosphatase (TRAP) and pentachrome.

RESULTS

Enzyme linked immunosorbent assay testing demonstrated greater IL-2 levels in the XG vs. AG 1 week post-op; which normalized by 28 days post-op. MicroPET scans showed increased uptake within the AG compared to all groups. XG and XG + BMP-2 showed a trend toward increased uptake compared with DBM. MicroCT scans demonstrated increased osseointegration in XG and XG + BMP groups compared to DBM. Pentachrome staining demonstrated angiogenesis and endochondral bone formation. Furthermore, positive TRAP staining in samples from all groups indicated bone remodeling.

CONCLUSIONS

These data suggest that decellularized and oxidized porcine XG is biocompatible and at least equivalent to DBM in the treatment of a critical defect in a rat femur model.

Incidence and risk of antiresorptive agent-related osteonecrosis of the jaw (ARONJ) after tooth extraction in patients with autoimmune disease

INTRODUCTION

Antiresorptive agent-related osteonecrosis of the jaw (ARONJ) is a rare but serious complication in patients receiving antiresorprtive agents (AR). However, the incidence of ARONJ after tooth extraction in patients with autoimmune disease (AID) remains unclear. The present study aimed to clarify the high-risk population of ARONJ in patients with AID.

MATERIALS AND METHODS

The study population comprised 232 patients treated with AR, AID or non-AID, who had undergone dental extraction from January 2011 to September 2017. The incidence and risk factors of ARONJ were analysed retrospectively. Additionally, the relationship between ARONJ and osteoporotic fracture (OF) and AR discontinuation during dental procedures was investigated.

RESULTS

Of 232 patients, 10 developed ARONJ within 1 year of dental extraction. The incidence of ARONJ in patients with AID was higher than that in non-AID patients (2.0/100 person-year vs 0.5/100 person-year; p = 0.03). Among the AID patients, RA patients had strikingly high incidence of ARONJ (3.6/100 person-year). The incidence of neither ARONJ nor OF significantly differed between patients who continued and discontinued AR in the perioperative period.

CONCLUSION

Patients with AID who undergo dental extraction are at high risk of ARONJ. Discontinuation of AR would not significantly contribute to reduce the incidence of ARONJ in those patients.

System for application of controlled forces on dental implants in rat maxillae: Influence of the number of load cycles on bone healing

Experimental studies on the effect of micromotion on bone healing around implants are frequently conducted in long bones. In order to more closely reflect the anatomical and clinical environments around dental implants, and eventually be able to experimentally address load‐management issues, we have developed a system that allows initial stabilization, protection from external forces, and controlled axial loading of implants. Screw‐shaped implants were placed on the edentulous ridge in rat maxillae. Three loading regimens were applied to validate the system; case A no loading (unloaded implant) for 14 days, case B no loading in the first 7 days followed by 7 days of a single, daily loading session (60 cycles of an axial force of 1.5 N/cycle), and case C no loading in the first 7 days followed by 7 days of two such daily loading sessions. Finite element modeling of the peri‐implant compressive and tensile strains plus histological and immunohistochemical analyses revealed that in case B any tissue damage resulting from the applied force (and related interfacial strains) did not per se disturb bone healing, however, in case C, the accumulation of damage resulting from the doubling of loading sessions severely disrupted the process. These proof‐of‐principle results validate the applicability of our system for controlled loading, and provide new evidence on the importance of the number of load cycles applied on healing of maxillary bone.