Influence of endodontic sealers with different chemical compositions on bond strength of the resin cement/glass fiber post junction to root dentin

Post retention strength of apical and conventional coating obturation methods using bioceramic sealer: a laboratory investigation

BACKGROUND

Once bioceramic sealer (BCS) enters the dentinal tubules, it cannot be reliably removed. BCS-occupied dentinal tubules reduce fibre post retention strength. Coating gutta-percha with BCS only on the apical portion may improve post retention strength due to increased retention strength between the dentin and resin cement interface. The aim of the study was to test this hypothesis.

METHODS

Root canals of 27 extracted human mandibular premolars were instrumented and randomly assigned to three obturation methods: conventional coating (CC), non-coating (NC), and apical coating (AC). The root canals were obturated with gutta-percha to 4 mm from the working length under an operating microscope. After the BCS was completely set, post spaces were prepared, and quartz fibre posts were cemented. The apical 4.5 mm of the roots were removed. Two samples were prepared at the apical, middle, and coronal root levels (one for scanning electron microscope (SEM) study and another for the push out bond strength (PBS) test). After the PBS test, the samples were examined with a stereo microscope to determine the failure mode: dentine-cement (DC), post-cement (PC) and mixed. The PBS data were analysed by One way ANOVA for the specific obturation method effects. Repeated ANOVA was used for the specific effects of the root levels on PBS in different obturation methods.

RESULTS

At all three root levels, more continuous hybrid layers and denser resin tags were found in the NC and AC than the CC group. The AC and NC groups' PBS was significantly higher than the CC group at the apical 1/3 (p = 0.002 and p = 0.001) and coronal 1/3 (p = 0.016 and p = 0.041). The PBS in the CC group at the middle 1/3 was significantly higher than the apical 1/3 (p = 0.022). DC failure mode was most commonly found in the CC group, while PC failure mode was found most frequently in the NC and AC groups.

CONCLUSIONS

The apical coating obturation method significantly increased PBS over the conventional coating method, potentially reducing fiber post dislodgement. However, this study was only preliminary. Clinical studies are required to confirm the results.

Effect of sodium/calcium hypochlorite on adhesion and adaptation of fiber posts luted with a dual resin cement

This study aimed to evaluate the effect of different concentrations of sodium hypochlorite (NaOCl) and calcium hypochlorite [Ca(OCl)2] on the bond strength and adaptation of glass fiber posts luted with a dual-curing resin cement. Fifty decoronated premolars were sectioned 14 mm from the apex and endodontically treated. The root canal filling was partially removed. The specimens were divided into 5 groups (n=10) according to the irrigant for post space irrigation: 0.9% sodium chloride (NaCl), (control); 2.5% NaOCl; 5.25% NaOCl; 2.5% Ca(OCl)2; and 5.25% Ca(OCl)2. For each group, irrigation was performed with 5 ml of solution. Afterward, the posts were luted with a dual-curing resin cement. One slice from each third was obtained and submitted to the push-out test and failure modes analysis. An additional slice from the middle third was submitted to confocal images for analysis of adaptation failures (gaps). Two-way ANOVA, Tukey's post-hoc, Kruskal-Wallis with Bonferroni adjusted, and chi-square tests, analyzed data. The group treated with 5.25% NaOCl showed lower bond strength values and generated more cohesive failures compared to the control (p < 0.05). Bond strength decreased from coronal to apical in the post space (p < 0.001). The groups treated with NaOCl had the highest percentages of gaps compared to the control (p < 0.05). Regardless of concentration, Ca(OCl)2 did not influence the bond strength and the occurrence of gaps (P > 0.05). Ca(OCl)2 is a good option for irrigating the post space before luting a fiber post with a dual-curing resin cement.

Comparison of the push-out bond strength of AH Plus sealer to dentin after using different herbal irrigation solutions as the final rinse

The aim of the present study was to evaluate the push-out bond strength of AH Plus sealer to dentin treated with the essential oils of Cumimum cyminum and Cinnamomum zeylanicum as herbal final irrigants. Forty human mandibular first premolars were selected. After smear layer removal, the samples were divided into 4 groups and irrigated with experimental solutions for 1 min and later with distilled water. G1: Cinnamomum zeylanicum (CZ) in minimum inhibitory concentration (MIC); G2: Sodium hypochlorite 2.5%; G3: Sodium hypochlorite in MIC; G4: Cuminum cyminum (CC) in MIC. After obturation, the roots were sectioned in order to obtain 1-mm discs for push-out assessment. The push-out test was performed using a universal testing machine. The slices were examined using a stereomicroscope at 30× to determine the mode of failure. The data were analyzed using one-way analysis of variance and Tukey's post-hoc test. The teeth irrigated with CZ showed significantly lower push-out resistance than those irrigated with NaOCl 2.5% and NaOCl at MIC. The other groups had no significant difference. The modes of failure were predominantly mixed. Under the limitations of the present study, CC does not have adverse effects on the bond strength of AH Plus and can be used as a good alternative for currently used final irrigants.

The effectiveness of EDTA 17% as a cleaning solution for the fiber post space after filling with cements

Aim: To evaluate the resistance of the union between a glass fiber post and radicular dentine after cleaning the root with 17% EDTA and filling with different endodontic cements. Methods: Forty uniradicular bovine incisors were removed to obtain root lengths of 18 mm. Endodontic treatment was performed on all roots using different filling cements (zinc oxide and eugenol-based, OZE; cement based on epoxy resin, AH) and cleaning solutions (saline, SA or EDTA), which made it possible to obtain four groups: OZESA, OZEEDTA, AHSA and AHEDTA. Subsequently, 12 mm of filling material was removed from the roots, and they were prepared to receive fiber posts luted with resin cement. To execute the mechanical cycles (2x106 cycles, 90 N, 4 Hz), coronal reconstruction was performed with a silicon matrix. The roots were then sliced (2-mm thick) to perform the push-out test. The results were analyzed using analysis of variance (one factor and two factors) and Tukey’s test (α=0,05). Results: Bond strength (Mpa) was significantly higher for OZEEDTA (9,18) and AHEDTA (8,70) than for OZESA (6,06) AHSA (8,7). OZEEDTA also presented the highest values in the cervical region (15,18) but was significantly lower in the apical region (2,99). However, AHEDTA had a homogeneous bond strength in all thirds. Conclusion: Regardless of the endodontic cement used, EDTA was used as an irrigating solution, culminating in a higher bond strength between the glass fiber post and dentin.

Impact of cleansing protocols to remove endodontic sealer residues on the adhesive interface: Bonding with universal adhesive systems

OBJECTIVE

The aim of this study was to evaluate the effectiveness of cleansing protocols to remove sealer residues using different cleaning strategies and the effect of bond strength of two universal adhesives to dentin impregnated with epoxy resin-based sealer.

MATERIALS AND METHODS

Fifty bovine dentin specimens were impregnated with epoxy resin-based sealer containing calcium hydroxide (Sealer Plus) and submitted to cleansing protocols (n = 10): negative control (NC), positive control (PC), 95% ethanol (ET), xylol (XI), and amyl acetate (AA). Specimens were evaluated by scanning electron microscope (SEM). Other 100 specimens were submitted to the same protocols (n = 20). Each protocol was divided into subgroups (n = 10) according to the universal adhesive system used: Scotchbond Universal (SU); Ambar Universal (AU). Bond strength was evaluated by micro-shear bond test (μSBT). Persistence of residues data were assessed with Kruskal-Wallis and Dunn's tests. μSBT data were analyzed with two-way ANOVA (α = 5%).

RESULTS

ET presented higher persistence of residues compared to AA and XI (p < 0.05). AA and XI were similar from each other (p > 0.05). AU and SU presented similar μSBT values, regardless of the cleansing solution (p > 0.05). SU-NC presented the highest μSBT among all conditions (p < 0.05).

CONCLUSION

The bond strength of universal adhesives was not affected by different amounts of sealer residues after different cleaning protocols.

CLINICAL SIGNIFICANCE

Non-polar substances such as amyl acetate and xylol are effective for removing residues from epoxy resin-based endodontic sealers.

Push-Out Bond Strength of Resin-Modified Glass Ionomer Cement and Flowable Composite Luting Systems on Glass Fiber Post of Root Canal

Background: Posts that have been properly fitted can withstand torsion forces and so provide better retention. The push-out bonding strength of glass fiber posts to the root canal was evaluated using resin-modified glass ionomer cement (RMGIC) and flowable composite (FC). Method: Forty single-rooted maxillary central incisors were used in the study. The samples were randomly divided into two groups of 20 teeth each. The crown-down procedure was used to clean and shape the pulp area. A Tenax fiber trans Coltene whaletene post was used by both groups. The first group utilized FC (Filtek Z 350 3M ESPE) to coat the post, whereas the second group used RMGIC (Rely X 3M ESPE). The specimens were cross-sectioned after 24 h. Specimens were cross-sectioned four millimeters thick into coronal and middle parts using a sectioning machine, yielding 40 specimens per group. The strength of the bond between the luting cement and the posts was measured using push-out bond strength testing. We loaded the components at a cross speed of 0.5 mm/min on a universal testing machine until the bond failed. Results: The FC group had a 4.80 N push-out bond strength, whereas the RMGIC group had a 7.11 N push-out bond strength. Conclusion: FC’s mean push-out bond strength score is lower than RMGIC’s.

Effect of the several epoxy resin-based sealer compositions on adhesion interface in radicular dentin after calcium hydroxide intracanal medication removal

Background

This study evaluated the effects of several epoxy resin-based sealer compositions (AHP, AH Plus; ADS, Adseal; SPL, Sealer Plus) on bond strength and intratubular dentin penetration of the endodontic obturation, in root canal previously treated with calcium hydroxide intracanal medication (CH) and removed by continuous ultrasonic irrigation (CUI).

Material and Methods

Forty-five maxillary canines were prepared up to F5 (ProTaper system), filled with CH, coronally sealed, and stored at 37ºC. After 1 week, CH was removed using 2.5% sodium hypochlorite energized by CUI. The specimens were randomly distributed in three groups (n=15) and root canal obturated, according to epoxy-based resin sealer composition (AHP, ADS or SPL). The roots were transversally sectioned in cervical, middle, and apical thirds. In each radicular third, push out bond strength using universal machine and intratubular dentin using confocal laser scanning microscopy (CLSM) and Image J Program were evaluated. Bond strength and intratubular dentin penetration were statistically evaluated by ANOVA one-way and Tukey tests and Kruskal Wallis test, respectively (α = 0.05).

Results

In middle and apical thirds, AHP showed higher bond strength values (p<0.05), and ADS and SPL were similar each other (p>0.05). All epoxy resin-based sealers presented similar intratubular dentin penetration, independently of the radicular thirds (p>0.05). Cohesive and mixed failures were predominant in the cervical thirds. In the middle and apical thirds, AHP showed more cohesive type failures, while ADS and SPL showed more adhesive-type failures.

Conclusions

AHP has the highest bond strength in middle and apical radicular thirds, after calcium hydroxide intracanal medication removal using continuous ultrasonic irrigation, although intratubular dentin infiltration being similar among epoxy resin-based sealer with several chemical composition. Key words:Continuous ultrasonic irrigation, endodontic sealers, epoxy resin-based sealers, root canal obturation.

Influence of different endodontic sealers on bond strength of fiber posts to weakened roots after resin restoration

OBJECTIVES

To assess the influence of different sealers used in root canal filling, in terms of bond strength (BS) to dentin, after restoration of weakened roots using resin composite (RC) and fiber posts.

MATERIAL AND METHODS

Roots of 39 maxillary incisors were used. After root canal preparation, root dentin was flared to produce a space between fiber post and root canal walls. The root canals were randomly distributed into three groups (n = 13), according to the sealer used: Endofill, AH Plus, and Acroseal. After removing the filling material to a depth of 12 mm, the flared roots were adhesively restored using RC. Posts were cemented and, after 24 h, roots were sectioned transversely producing 1-mm-thick slices. The slices from 30 roots were used for push-out test, and failure modes were noted. The remaining slices were analyzed by scanning electron microscopy (SEM).

RESULTS

Statistical analysis by 2-way ANOVA showed a significant difference among sealers (p = 0.001) and among root regions (p < 0.001). The BS mean of Endofill was lower and significantly different from the others. Overall, the coronal region presented higher BS mean values, followed by the middle and apical regions of the reinforced roots. The most frequent failure type was the adhesive failure between RC and dentin. SEM analysis showed the formation of a hybrid layer and many tags in the coronal and middle regions, while the apical region exhibited remnants of the endodontic sealers in all groups.

CONCLUSIONS

AH Plus and Acroseal sealer groups presented similar results, and the Endofill sealer negatively affected the BS of fiber post to restored root dentin.

CLINICAL RELEVANCE

Weakened dentin walls are often found in teeth undergoing endodontic treatment, so the sealer used must allow or at least not interfere the bonding between restorative materials and root dentin.

Current perspectives on dental adhesion: (3) Adhesion to intraradicular dentin: Concepts and applications

Adhesion science is one of the greatest contributions to restorative dentistry. Adhesion not only established the current principles of tissue preservation, but also allowed for the production of more hermetic and long-lasting restorations. Although adhesive strategies are routinely used in most clinical situations, adhesion to root dentin is still a major challenge. The presence of humidity together with less intertubular dentin are factors that limit the adhesive potential of root dentin. This situation is more unfavorable in endodontically treated teeth prepared for prefabricated or custom-made intraradicular posts; these procedures may alter the mechanical properties of teeth by modifying the viable dentin surface for adhesion. Also, contaminants deposited on the dentin surface are difficult to remove through conventional techniques. Moreover, root canal morphology has a very unfavorable C-factor, bringing undesirable effects resulting from polymerization contraction of resin-based materials. However, the differences between coronal and root dentin are not a barrier for dentin adhesion. Standardization of procedures and care during clinical steps are fundamental to the success of adhesion to coronal or intraradicular dentin. Thus, it is essential to know the anatomy of the root structure, the factors that interfere with intraradicular adhesion, as well as the current adhesive materials and techniques.

Effect of Ultrasonic Activation of Endodontic Sealers on Intratubular Penetration and Bond Strength to Root Dentin

INTRODUCTION

This study aimed to evaluate the effect of ultrasonic activation (UA) of endodontic sealers on dentin tubule penetration and the bond strength to root dentin.

METHOD

One hundred single-rooted teeth were prepared with 40.06 nickel-titanium instruments and divided into 2 groups: with or without UA. Three resin-based sealers (MTA Fillapex [Angelus Dental Solutions, Londrina, PR, Brazil], Sealer Plus [MK Life Medical and Dental Products, Porto Alegre, RS, Brazil], and AH Plus [Dentsply, DeTrey GmbH, Konstanz, Germany]; n = 20) and 2 calcium silicate-based sealers (Sealer Plus BC [MK Life Medical and Dental Products] and EndoSequence BC [Brasseler, Savannah, GA], n = 20) were used and subdivided (n = 10) according to the protocols. Fluo-3 (Thermo Fisher Scientific, Waltham, MA) and rhodamine B dyes were added to the calcium silicate- and resin-based sealers, respectively. In the UA groups, the activation was performed for 40 seconds followed by lateral compaction. Samples were transversely sectioned to evaluate the dentin tubule penetration and the bond strength to root dentin. The penetration data were analyzed with the Student t test, 1-factor analysis of variance, and Bonferroni tests. Bond strength was evaluated using the Student t test, Kruskal-Wallis, and Dunn post hoc test.

RESULTS

Resin-based sealers showed the highest tubule penetration without UA (P < .05). UA significantly enhanced MTA Fillapex and Endosequence BC dentin tubule penetration (P < .05). AH Plus and Sealer Plus BC improved their bond strength to root dentin after UA (P < .05). AH Plus/UA, Sealer Plus/UA, and Sealer Plus BC/UA presented the highest bond strength values (P < .05). Adhesive failures were predominant in all groups regardless of the use of ultrasound.

CONCLUSIONS

UA interferes with tubule penetration and the bond strength to root dentin of resin- and calcium silicate-based sealers.