Glucose-sensitive field effect transistor using totally synthetic compounds

Single-Component Electroactive Polymer Architectures for Non-Enzymatic Glucose Sensing

Organic mixed ionic-electronic conductors (OMIECs) have emerged as promising materials for biological sensing, owing to their electrochemical activity, stability in an aqueous environment, and biocompatibility. Yet, OMIEC-based sensors rely predominantly on the use of composite matrices to enable stimuli-responsive functionality, which can exhibit issues with intercomponent interfacing. In this study, an approach is presented for non-enzymatic glucose detection by harnessing a newly synthesized functionalized monomer, EDOT-PBA. This monomer integrates electrically conducting and receptor moieties within a single organic component, obviating the need for complex composite preparation. By engineering the conditions for electrodeposition, two distinct polymer film architectures are developed: pristine PEDOT-PBA and molecularly imprinted PEDOT-PBA. Both architectures demonstrated proficient glucose binding and signal transduction capabilities. Notably, the molecularly imprinted polymer (MIP) architecture demonstrated faster stabilization upon glucose uptake while it also enabled a lower limit of detection, lower standard deviation, and a broader linear range in the sensor output signal compared to its non-imprinted counterpart. This material design not only provides a robust and efficient platform for glucose detection but also offers a blueprint for developing selective sensors for a diverse array of target molecules, by tuning the receptor units correspondingly.

Mesoporous Silica-Based Metal Oxide Electrode for a Nonenzymatic Glucose Sensor at a Physiological pH

To construct an electrochemical biosensing platform, we propose a glucose sensor whose electrode interface was modified by mesoporous silica (MPSi) as an electronic signal transmission interface between a biomarker and an electrochemical device. We develop an enzyme-free glucose sensor using an MPSi-coated Ta₂O₅ electrode in an actual biological fluid such as blood serum. MPSi includes a phenylboronic acid (PBA) molecule, in which glucose binds to a synthesized PBA-silane compound in an ca. 150 nm thick MPSi nanolayer, which changes the density of molecular charges of the PBA/glucose complex on the surface of MPSi. The charge changes derived from the equilibrium reaction of PBA with glucose lead to changes in surface potential of the Ta₂O₅ electrode, and the surface potential changes depending on glucose concentration were measured by a potentiometric detector. As a result, a remarkable surface potential response was observed in the vicinity of neutral pH. K_d = 6.0 mM and V_max = 194 mV were obtained from the fitting curve of the Langmuir adsorption isotherm. Finally, we confirmed the glucose response of the PBA-MPSi-coated Ta₂O₅ substrate in human serum by considering the influence of various contaminants. Although the surface potential change was suppressed by approximately one-third of that in the buffer system, it was suggested that it could be applied to measurements in the blood glucose concentration range. From the results of this study, it was clarified that blood-level glucose response could be monitored using a PBA-MPSi-coated Ta₂O₅ substrate, which suggests the possibility of using a nonenzymatic glucose sensor as an alternative to the existing enzyme sensor.

Functionalized microneedles for continuous glucose monitoring

Microneedles (MNs) have been established as promising medical devices as they are minimally invasive, cause less pain, and can be utilized for self-administration of drugs by patients. There has been rapid development in MNs for transdermal monitoring and diagnostic systems, following the active research on fabrication methods and applications for drug delivery. In this paper, recent investigations on bio-sensing using MNs are reviewed in terms of the applicability to continuous glucose monitoring system (CGMS), which is one of the main research focuses of medical engineering technologies. The trend of the functionalized MNs can be categorized as follows: (i) as a sensing probe, and (ii) as a biological fluid collector. MNs as in vivo sensors are mainly integrated or coated with conductive materials to have the function as electrodes. MNs as fluid collectors are given a certain geometrical design, such as a hollow and porous structure aided by a capillary action or negative pressure, to extract the interstitial fluids or blood for ex vivo analysis. For realization of CGMS with MNs, a long-term accurate measurement by the MN-based sensing probe or a fluidic connection between the MN-based fluid collector and the existing microfluidic measurement systems should be investigated.

Molecularly Imprinted Artificial Biointerface for an Enzyme-Free Glucose Transistor

A platform based on a highly selective and sensitive detection device functionalized with a well-designed artificial biointerface is required for versatile biosensors. We develop a molecularly imprinted polymer (MIP)-coated gate field-effect transistor (FET) biosensor for low-concentration glucose detection in biological fluid samples such as tears in an enzyme-free manner. The MIP includes glucose templates (GluMIP), in which glucose binds to vinylphenylboronic acid in the copolymerized membrane, resulting in the change in the density of molecular charges of the phenylboronic acid (PBA)/glucose complex. The FET biosensor can detect small biomolecules as long as biomolecular recognition events cause intrinsic changes in the density of molecular charges. As a result, the changes in the output voltage detected using the GluMIP-based FET sensor are fitted to the Langmuir adsorption isotherm equation at various concentrations of sugars, showing the low detection limit of 3 μM and the high sensitivity of 115 mV/decade from 100 μM to 4 mM glucose. On the basis of the equation, the stability constant ( K_a) of PBA with glucose is calculated and found to markedly increase to K_a = 1192 M^-1, which is higher by a factor of a few hundreds than K_a = 4.6 M^-1 obtained by nonelectrical detection methods. Moreover, the GluMIP-coated gate FET sensor shows an approximately 200-fold higher selectivity for glucose than for fructose. This is because glucose binds to PBA more selectively than fructose in the templates, resulting in the generation of negative charges. The electrical properties of the MIP-coated electrode are also evaluated by measuring capacitance. Our work suggests a new strategy of designing a platform based on the MIP-coated gate FET biosensor, which is suitable for a highly selective, sensitive, enzyme-free biosensing system.

Swelling, Mechanics, and Thermal/Chemical Stability of Hydrogels Containing Phenylboronic Acid Side Chains

We report here studies of swelling, mechanics, and thermal stability of hydrogels consisting of 20 mol % methacrylamidophenylboronic acid (MPBA) and 80 mol % acrylamide (AAm), lightly crosslinked with methylenebisacrylamide (Bis). Swelling was measured in solutions of fixed ionic strength, but with varying pH values and fructose concentrations. Mechanics was studied by compression and hold. In the absence of sugar or in the presence of fructose, the modulus was mostly maintained during the hold period, while a significant stress relaxation was seen in the presence of glucose, consistent with reversible, dynamic crosslinks provided by glucose, but not fructose. Thermal stability was determined by incubating hydrogels at pH 7.4 at room temperature, and 37, 50, and 65 °C, and monitoring swelling. In PBS (phosphate buffered saline) solutions containing 9 mM fructose, swelling remained essentially complete for 50 days at room temperature, but decreased substantially with time at the higher temperatures, with accelerated reduction of swelling with increasing temperature. Controls indicated that over long time periods, both the MPBA and AAm units were experiencing conversion to different species.

Recent progress in electrochemical biosensors based on phenylboronic acid and derivatives

This review provides an overview of recent progress made in the development of electrochemical biosensors based on phenylboronic acid (PBA) and its derivatives. PBAs are known to selectively bind 1,2- and 1,3-diols to form negatively charged boronate esters in neutral aqueous media and have been used to construct electrochemical glucose sensors because of this selective binding. PBA-modified metal and carbon electrodes have been widely studied as voltammetric and potentiometric glucose sensors. In some cases, ferroceneboronic acid or ferrocene-modified phenylboronic acids are used as sugar-selective redox compounds. Another option for sensors using PBA-modified electrodes is potentiometric detection, in which the changes in surface potential of the electrodes are detected as an output signal. An ion-sensitive field effect transistor (FET) has been used as a signal transducer in potentiometric sensors. Glycoproteins, such as glycated hemoglobin (HbA1c), avidin, and serum albumin can also be detected by PBA-modified electrodes because they contain hydrocarbon chains on the surface. HbA1c sensors are promising alternatives to enzyme-based glucose sensors for monitoring blood glucose levels over the preceding 2-3months. In addition, PBA-modified electrodes can be used to detect a variety of compounds including hydroxy acids and fluoride (F(-)) ions. PBA-based F(-) ion sensors may be useful if reagentless sensors can be developed.

An extended-gate type organic field effect transistor functionalised by phenylboronic acid for saccharide detection in water

Saccharides in water are detected electrically using an extended-gate type organic field effect transistor (OFET) functionalised by a phenylboronic acid monolayer. The response patterns of the monosaccharides are significantly different, suggesting that OFET devices can successfully read out the saccharide recognition behaviour of boronic acids and be potentially applied to healthcare devices modified with supramolecular receptors.

Simultaneous biosensing with quartz crystal microbalance with a dissipation coupled-gate semiconductor device

In this study, we proposed and demonstrated a novel simultaneous analysis system of biosensing by combining a semiconductor-based field effect transistor (FET) with quartz crystal microbalance with a dissipation (QCM-D) monitoring system. Using the combined system, the changes of not only mass and viscoelasticity but also electrical charge for interaction of charged dextran molecules with substrate, recognition of glucose with low molecular weight, and programmed cell death, apoptosis, were simultaneously and quantitatively monitored in a label-free and real-time manner. The combined system will give more detailed information of biomolecule/substrate interface for development of new biomaterial.

The development of boronic acids as sensors and separation tools

Synthetic receptors for diols that incorporate boronic acid motifs have been developed as new sensors and separation tools. Utilizing the reversible interactions of diols with boronic acids to form boronic esters under new binding regimes has provided new hydrogel constructs that have found use as dye-displacement sensors and electrophoretic separation tools; similarly, molecular boronic-acid-containing chemosensors were constructed that offer applications in the sensing of diols. This review provides a somewhat-personal perspective of developments in boronic-acid-mediated sensing and separation, placed in the context of the seminal works of others in the area, as well as offering a concise summary of the contributions of the co-authors in the area.

Chemical-to-Electrical-Signal Transduction Synchronized with Smart Gel Volume Phase Transition

A stimulus-responsive polymer gel designed on a field-effect transistor gate undergoes a reversible volume phase transition in response to a specific biomolecule. An abrupt permittivity change at the gel/gate interface during the transition gives rise to a chemical to electrical signal conversion; the signal is thus detectable via a transistor without the limit of the Debye length.