Characteristics of granular cold-water-soluble potato starch treated with alcohol and alkali

Chitosan/starch based unoxidized tannic acid modified microparticles for rapid hemostasis with broad spectrum antibacterial activity

The development of a rapid hemostat through a facile method with co-existing antibacterial activity and minimum erythrocyte lysis property stands as a major requirement in the field of hemostasis. Herein, a series of novel microparticle hemostats were synthesized using chitosan, different hydrothermally-treated starches, and cross-linked with tannic acid (TA) simultaneously in an unoxidized environment via ionotropic gelation method. Hemostats' comparative functional properties, such as adjustable antibacterial and erythrocyte compatibility upon various starch additions were evaluated. The in vivo hemostatic study revealed that the developed hemostats for mouse liver laceration and rat tail amputation had clotting times (13 s and 38 s, respectively) and blood loss (51 mg and 62 mg, respectively) similar to those of Celox™. The erythrocyte adhesion test suggested that erythrocyte distortion can be lowered by modifying the antibacterial hemostats with different starches. The broad-spectrum antibacterial efficacy of the hemostats remained intact against S. aureus (>90 %), E. coli (>80 %), and P. mirabilis bacteria upon starch modification. They also demonstrated high hemocompatibility (<3 % hemolysis ratio), moderate cell viability (>81 %), in vivo biodegradation, and angiogenesis indicating adequate biocompatibility and wound healing. The developed hemostats hold significant promise to be employed as rapid hemostatic agents for preventing major bleeding and bacterial infection in emergencies.

Rheological and gelling properties of atmospheric pressure cold plasma treated finger millet (Eleusine coracana) starch

Interest in exploring alternative starch sources like finger millet is rising due to wide starch applications. However, native starch often lacks desired qualities, including rheological properties. Modification is thus necessary for specific end uses. Plasma treatment as a greener and sustainable method for starch modification was therefore, studied for its ability to impact rheological properties of finger millet starch (FMS). Considerable changes in the rheological properties on FMS was noted, a significant decrease and increase (p < 0.05) in the peak viscosity (from 3.35 to 0.553 Pa.s) and paste clarity respectively was observed, indicating occurrence of depolymerization. However, intermediate plasma-treated samples (200 V) observed a decrease in paste clarity attributed to aggregate formation and cross-linking. Cross-linking was also confirmed by findings of frequency sweep where a continuous decrease in G' values of plasma treated FMS gel was interrupted by sudden increase. Despite depolymerization causing alteration of rheological behaviour such as decrease in shear thinning properties, gel strength observed a contradictory increase. This was attributed to incorporation of functional group and absence of shear responsible for network formation giving higher gel strength to FMS gels. This is elaborated in detail in the study. The study thus concluded that cold plasma significantly impacted all the rheological properties of the FMS and hence can prove to be beneficial for modification of starch rheological parameters.

Comparative analysis of multi-angle structural alterations and cold-water solubility of kudzu starch modifications using different methods

Kudzu, a plant known for its medicinal value and health benefits, is typically consumed in the form of starch. However, the use of native kudzu starch is limited by its high pasting temperature and low solubility, leading to a poor consumer experience. In this study, kudzu starch was treated using six modification techniques: ball milling, extrusion puffing, alcoholic-alkaline, urea-alkaline, pullulanase, and extrusion puffing-pullulanase. The results of the Fourier transform infrared spectrum showed that the intensity ratio of 1047/1022 cm-1 for the modified starches (1.02-1.21) was lower than that of the native kudzu starch (1.22). The relative crystallinity of modified kudzu starch significantly decreased, especially after ball milling, extrusion puffing, and alcoholic-alkaline treatment. Furthermore, scanning electron microscopy and confocal laser scanning microscopy revealed significant changes in the granular structures of the modified starches. After modification, the pasting temperature of kudzu starch decreased (except for the urea-alkaline treatment), and the apparent viscosity of kudzu starch decreased from 517.95 Pa·s to 0.47 Pa·s. The cold-water solubility of extrusion-puffing and extrusion puffing-pullulanase modified kudzu starch was >70 %, which was significantly higher than that of the native starch (0.11 %). These findings establish a theoretical basis for the potential development of instant kudzu powder.

Physicochemical properties of amorphous granular starch (AGS) prepared by non-thermal gelatinization by high hydrostatic pressure (HHP) and spray drying

Corn starch was gelatinized by high hydrostatic pressure (HHP) and spray drying to make amorphous granular starch (AGS), and their physicochemical properties were compared with the conventionally prepared (heat-gelatinized and spray dried) AGS to devise a novel AGS preparation methodology. Pressure-induced (PAGS) and heat-induced AGS (HAGS) maintained their granular shape but lost their birefringence indicating that both methods could prepare AGS. DSC (differential scanning calorimeter) and XRD (X-ray diffraction) analysis confirmed the complete loss of amylopectin double helices and crystallinity of both PAGS and HAGS. However, their swelling power, solubility, RVA pasting properties, acid/shear stability, gel forming ability and textural properties were completely different. PAGS exhibited constrained swelling, suppressed amylose leaching, and reduced viscosity. Notably, HAGS formed a gel without heating, whereas PAGS yielded a viscous paste with water-soluble attributes. Even after reheating, PAGS maintained its granular structure with comparably less swelling and weaker gel strength than HAGS. Consequently, newly developed PAGS exhibited distinctive characteristics compared to the conventional HAGS, such as lower solubility and swelling power, viscosity, textural properties, and high acid and shear stabilities, rendering it a viable option for various applications within the food industry.

A comprehensive review on starch: Structure, modification, and applications in slow/controlled-release fertilizers in agriculture

This comprehensive review thoroughly examines starch's structure, modifications, and applications in slow/controlled-release fertilizers (SRFs) for agricultural purposes. The review begins by exploring starch's unique structure and properties, providing insights into its molecular arrangement and physicochemical characteristics. Various methods of modifying starch, including physical, chemical, and enzymatic techniques, are discussed, highlighting their ability to impart desirable properties such as controlled release and improved stability. The review then focuses on the applications of starch in the development of SRFs. It emphasizes the role of starch-based hydrogels as effective nutrient carriers, enabling their sustained release to plants over extended periods. Additionally, incorporating starch-based hydrogel nano-composites are explored, highlighting their potential in optimizing nutrient release profiles and promoting plant growth. Furthermore, the review highlights the benefits of starch-based fertilizers in enhancing plant growth and crop yield while minimizing nutrient losses. It presents case studies and field trials demonstrating starch-based formulations' efficacy in promoting sustainable agricultural practices. Overall, this review consolidates current knowledge on starch, its modifications, and its applications in SRFs, providing valuable insights into the potential of starch-based formulations to improve nutrient management, boost crop productivity, and support sustainable agriculture.

Effect of electron beam irradiation on granular cold-water swelling chestnut starch: Improvement of cold-water solubility, multiscale structure, and rheological properties

In this study, granular cold-water swelling (GCWS) starch was prepared from chestnut starch by ethanol-alkali method, after which it was further modified by electron beam irradiation (EBI) technique to investigate the effect of EBI on GCWS chestnut starch. It was shown that the alcohol-alkali treatment disrupted the starch double helix structure and the starch crystalline form had been changed from "C" to "V" type. On this basis, EBI continued to act on the disrupted starch chains and further cleaved the long chains into short chains, which significantly improved the solubility of starch to 90.08 % in cold water at a 24 kGy irradiation dose. Therefore, this study can broaden the application scope of starch and provide new ideas for GCWS starch applications in food and water-soluble pharmaceutical industries.

Pulsed Electric Field-Assisted Enzymatic and Alcoholic-Alkaline Production of Porous Granular Cold-Water-Soluble Starch: A Carrier with Efficient Zeaxanthin-Loading Capacity

In this study, porous starch was modified using pulsed electric field (PEF) pretreatment and alcoholic-alkaline treatment to prepare porous granular cold-water-soluble starch (P-GCWSS). The soluble porous starch has high adsorption capability and high cold water solubility, allowing effective encapsulation of zeaxanthin and improving zeaxanthin's water solubility, stability, and bioavailability. The physical and chemical properties of GCWSS and complex were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. The results showed that the cold water solubility of the pulsed electric field-treated porous granular cold-water-soluble starch (PEF-P-GCWSS) increased by 12.81% compared to granular cold-water-soluble starch (GCWSS). The pulsed electric field treatment also increased the oil absorption of PEF-P-GCWSS was improved by 15.32% compared to porous granular cold-water-soluble starch (P-GCWSS). PEF-P-GCWSS was effective in encapsulating zeaxanthin, which provided a good protection for zeaxanthin. The zeaxanthin-saturated solubility in water of PPG-Z was increased by 56.72% compared with free zeaxanthin. The zeaxanthin embedded in PEF-P-GCWSS was able to be released slowly during gastric digestion and released rapidly during intestinal digestion.

Properties of potato starch as influenced by microwave, ultrasonication, alcoholic-alkali and pre-gelatinization treatments

The present study was framed to develop modified potato starch by various physical (microwave treatment, ultrasonication, pre-gelatinization) and chemical (alcohol-alkali) methods. Both native and modified starches were characterized on the basis of physicochemical, functional, and morphological attributes. Compared to native potato starch, modified starches exhibited improved water absorption capacity and water solubility index. The particle size of the starches was found to be in the range of 10.01-10.36 μm with negative zeta potential values. FTIR results revealed that modification in the peaks is attributed to the change in the structural configuration and re-organization of the microstructure between molecules of the starch during the treatments. The results of X-ray diffraction suggested that the typical peaks varied to a little extent with modifications and relative crystallinity was decreased for all treated starches. SEM Micrographs revealed the complete structural changes and irregularities in pre-gelatinized and chemically modified starches, whereas other modification methods maintained the structural integrity of starch granules. An increase in pasting temperature of modified starches represented a higher resistance to swelling and rupture, whereas rheologically, starches exhibited non-newtonian behavior with the shear-thinning property. Thus, the characteristics of modified starches will assist in the selection of potato starch for better applications in the food industry.

Effect of NaCl addition on alcohol-alkali-treated waxy rice starch: Structural and physicochemical functionality

The physicochemical and structural properties of waxy rice starch (WRS) and alcohol-alkali-treated waxy rice starch (AAT-WRS) were determined in the presence of different concentrations of NaCl (0, 2, 4, 6 and 8%). The results showed that NaCl decreased the transparency of WRS and AAT-WRS pastes, but enhanced both freeze-thaw stability and apparent viscosity (p < 0.05). The rheological measurement results showed that the addition of NaCl could improve the modulus values of both WRS and AAT-WRS, and the effect on WRS was more significant than that on AAT-WRS. The textural parameters of WRS pastes were evidently enhanced by NaCl, but the presence of NaCl had no significant effect on the firmness of AAT-WRS pastes. The results of SEM and FT-IR revealed that NaCl could protect the granular morphology and increase the degree of short-range order of WRS and AAT-WRS.

Structural and mechanistic insights into starch microgel/anthocyanin complex assembly and controlled release performance

We report a self-assembly method for the fabrication of multilayer-starch-based microgels used for anthocyanin encapsulation. Alcohol-heating treatment and ionization reactions were employed to reduce the crystallinity of starch and introduce ionic groups on the molecule to further cross-link it with sodium trimetaphosphate and produce a starch microgel. The molecular interactions between the starch and the anthocyanins facilitated the anthocyanin encapsulation and the starch-microgel/anthocyanin complexes with one, two, and three self-assembled layers were obtained. The Lay-1 microgel exhibited an encapsulation efficiency of 50.1% when the anthocyanin concentration, cross-linking starch concentration, contact time, and temperature were 0.25 mg/mL, 1.5 mg/mL, 3 h, and 40 °C, respectively. An increase in the number of layers resulted in a more compact microgel structure with the zeta potential presenting variations upon structural changes. Furthermore, the encapsulated anthocyanins presented a slow release from Lay-1, while the multilayered microgels (Lay-2 and Lay-3) displayed outstanding encapsulation stability. This study gives an insight on the encapsulation and release of anthocyanins by starch microgels, and provides a novel strategy for the design of starch-based encapsulation materials presenting great stability.

Planetary ball-mill as a versatile tool to controlled potato starch modification to broaden its industrial applications

Pure potato starch has been modified by high-energy-ball-milling as a function of energy supplied, aiming to obtain products for different possibilities of industrial application. Burgios's equation has been used to calculate the energy supplied. The effect of the milling has been followed by a characterization of the starch morphology, crystallinity, solubility, swelling, retrogradation, viscosity, apparent viscosity, functional groups, and reducing sugar concentration. The high-energy-ball-milling not only changes the physical properties but also induces the mechanolysis of potato starch, breaking the glycosidic linkages of the starch molecules. A representation of the possible mechanism of starch mechanolysis is proposed. Three stages of the transformation of potato starch through high-energy ball-milling can be identified. Each of these stages generates starch with properties that can be used in different industrial applications.

Pre-treatment of granular rice starch to enhance branching enzyme catalysis

Effects of different pre-treatments of granular rice starch using ethanol (ET) and maltogenic α-amylase (MA), separately or combined sequentially ET→MA, were performed to enable efficient subsequent modification with branching enzyme (BE). The pre-treated samples were characterized with respect to morphology, molecular structure, physicochemical properties and the rate of digestion to amylolytic enzymes. MA produced pores and also eroded the granular surface whereas ET caused coapted granules, noticeable swelling but no pores. Crystallinity and enthalpy of gelatinization dramatically decreased with ET and ET→MA. Subsequent BE catalysis increased the specific surface area, crystallinity, α-1,6-glucosidic linkage ratio and enthalpy. BE catalyzed branching resulted in more intact granules, less swelling capacity, solubility and granular separation as compared to their control. These effects were related to reduced amylolytic susceptibility. Pre-treatment prior to BE catalysis offers an efficient alternative way to modify granular starch with different structure and properties depending on the pre-treatment protocol.