Predicting enzyme behavior in nonconventional media: correlating nitrilase function with solvent properties

Process Optimisation Studies and Aminonitrile Substrate Evaluation of Rhodococcus erythropolis SET1, A Nitrile Hydrolyzing Bacterium

A comprehensive series of optimization studies including pH, solvent and temperature were completed on the nitrile hydrolyzing Rhodococcus erythropolis bacterium SET1 with the substrate 3-hydroxybutyronitrile. These identified temperature of 25 °C and pH of 7 as the best conditions to retain enantioselectivity and activity. The effect of the addition of organic solvents to the biotransformation mixture was also determined. The results of the study suggested that SET1 is suitable for use in selected organo-aqueous media at specific ratios only. The functional group tolerance of the isolate with unprotected and protected β-aminonitriles, structural analogues of β-hydroxynitriles was also investigated with disappointingly poor isolated yields and selectivity obtained. The isolate was further evaluated with the α- aminonitrile phenylglycinonitrile generating acid in excellent yield and ee (>99 % (S) - isomer and 50 % yield). A series of pH studies with this substrate indicated pH 7 to be the optimum pH to avoid product and substrate degradation.

Characterization of an atypical, thermostable, organic solvent- and acid-tolerant 2'-deoxyribosyltransferase from Chroococcidiopsis thermalis

In our search for thermophilic and acid-tolerant nucleoside 2'-deoxyribosyltransferases (NDTs), we found a good candidate in an enzyme encoded by Chroococcidiopsis thermalis PCC 7203 (CtNDT). Biophysical and biochemical characterization revealed CtNDT as a homotetramer endowed with good activity and stability at both high temperatures (50-100 °C) and a wide range of pH values (from 3 to 7). CtNDT recognizes purine bases and their corresponding 2'-deoxynucleosides but is also proficient using cytosine and 2'-deoxycytidine as substrates. These unusual features preclude the strict classification of CtNDT as either a type I or a type II NDT and further suggest that this simple subdivision may need to be updated in the future. Our findings also hint at a possible link between oligomeric state and NDT's substrate specificity. Interestingly from a practical perspective, CtNDT displays high activity (80-100%) in the presence of several water-miscible co-solvents in a proportion of up to 20% and was successfully employed in the enzymatic production of several therapeutic nucleosides such as didanosine, vidarabine, and cytarabine.

An investigation of nitrile transforming enzymes in the chemo-enzymatic synthesis of the taxol sidechain

Paclitaxel (taxol) is an antimicrotubule agent widely used in the treatment of cancer. Taxol is prepared in a semisynthetic route by coupling the N-benzoyl-(2R,3S)-3-phenylisoserine sidechain to the baccatin III core structure. Precursors of the taxol sidechain have previously been prepared in chemoenzymatic approaches using acylases, lipases, and reductases, mostly featuring the enantioselective, enzymatic step early in the reaction pathway. Here, nitrile hydrolysing enzymes, namely nitrile hydratases and nitrilases, are investigated for the enzymatic hydrolysis of two different sidechain precursors. Both sidechain precursors, an openchain α-hydroxy-β-amino nitrile and a cyanodihydrooxazole, are suitable for coupling to baccatin III directly after the enzymatic step. An extensive set of nitrilases and nitrile hydratases was screened towards their activity and selectivity in the hydrolysis of two taxol sidechain precursors and their epimers. A number of nitrilases and nitrile hydratases converted both sidechain precursors and their epimers.

Influence of Organic Solvents on Enzymatic Asymmetric Carboligations

The asymmetric mixed carboligation of aldehydes with thiamine diphosphate (ThDP)-dependent enzymes is an excellent example where activity as well as changes in chemo- and stereoselectivity can be followed sensitively. To elucidate the influence of organic additives in enzymatic carboligation reactions of mixed 2-hydroxy ketones, we present a comparative study of six ThDP-dependent enzymes in 13 water-miscible organic solvents under equivalent reaction conditions. The influence of the additives on the stereoselectivity is most pronounced and follows a general trend. If the enzyme stereoselectivity in aqueous buffer is already >99.9% ee, none of the solvents reduces this high selectivity. In contrast, both stereoselectivity and chemoselectivity are strongly influenced if the enzyme is rather unselective in aqueous buffer. For the S-selective enzyme with the largest active site, we were able to prove a general correlation of the solvent-excluded volume of the additives with the effect on selectivity changes: the smaller the organic solvent molecule, the higher the impact of this additive. Further, a correlation to log P of the additives on selectivity was detected if two additives have almost the same solvent-excluded volume. The observed results are discussed in terms of structural, biochemical and energetic effects. This work demonstrates the potential of medium engineering as a powerful additional tool for varying enzyme selectivity and thus engineering the product range of biotransformations. It further demonstrates that the use of cosolvents should be carefully planned, as the solvents may compete with the substrate(s) for binding sites in the enzyme active site.

One-step enzymatic synthesis of nucleosides from low water-soluble purine bases in non-conventional media

The effect of several water-miscible cosolvents on activity and stability of soluble and immobilized 2'-deoxyribosyltransferase from Lactobacillus reuteri on Sepabeads® has been studied in order to establish optimal conditions for enzymatic synthesis of nucleosides using purine bases with low solubility in aqueous buffer. As a rule of thumb, there was a general reduction of soluble enzyme activity when cosolvent content was gradually increased in reaction medium. In contrast, immobilized enzyme activity was enhanced 1.2-1.4-fold at 20% of methanol, ethanol, 2-propanol, diethylene glycol, and acetone; and at 10% and 30% acetonitrile. Likewise, highest increased activity (1.8-fold) was also obtained in presence of 20% acetonitrile. Immobilized enzyme was successfully used in the synthesis of 2'-deoxyxanthosine and 2'-deoxyguanosine using 2'-deoxyuridine as sugar donor and the corresponding poor water-soluble base in the presence of 30% of methanol, ethanol, 2-propanol, ethylene glycol, acetonitrile, and DMSO, giving high nucleoside yields at 4h.

Biosynthesis of benzoylformic acid from benzoyl cyanide by a newly isolated Rhodococcus sp. CCZU10-1 in toluene-water biphasic system

Benzoylformic acid was synthesized from the hydrolysis of benzoyl cyanide by a newly isolated Rhodococcus sp. CCZU10-1. In this study, an aqueous-toluene biphasic system was developed for highly efficient production of benzoylformic acid from the hydrolysis of benzoyl cyanide. In the aqueous-toluene biphasic system, the phase volume ratio, buffer pH and reaction temperature were optimized. Using fed-batch method, a total of 932 mM benzoylformic acid accumulated in the reaction mixture after the 10th feed. Moreover, enzymatic hydrolysis of benzoyl cyanide using calcium alginate entrapped resting cells was carried out in the aqueous-toluene biphasic system, and efficient biocatalyst recycling was achieved as a result of cell immobilization in calcium alginate, with a product-to-biocatalyst ratio of 14.26g benzoylformic acid g(-1) dry cell weight (DCW) cell after 20 cycles of repeated use.

Stereo-selective conversion of mandelonitrile to (R)-(−)-mandelic acid using immobilized cells of recombinant Escherichia coli

Immobilized cells of a recombinant Escherichia coli expressing nitrilase from Pseudomonas putida were used to catalyze the hydrolysis of mandelonitrile (2-hydroxy-2-phenylacetonitrile) to (R)-(−)-mandelic acid. The cells had been immobilized by entrapment in an alginate matrix. Conditions for the hydrolysis reaction were optimized in shake flasks and in a packed bed reactor. In shake flasks the best conditions for the reaction were a temperature of 40 °C, pH 8, biocatalyst bead diameter of 4.3 mm, sodium alginate concentration in the gel matrix of 2 % (w/v, g/100 mL), a cell dry mass concentration in the bead matrix of 20 mg/mL, an initial substrate concentration of 50 mM and a reaction time of 60 min. Under these conditions, the conversion of mandelonitrile was nearly 95 %. In the packed bed reactor, a feed flow rate of 20 mL/h at a substrate concentration of 200 mM proved to be the best at 40 °C, pH 8, using 4.3 mm beads (2 % w/v sodium alginate in the gel matrix, 20 mg dry cell concentration per mL of gel matrix). This feed flow rate corresponded to a residence time of 0.975 h in the packed bed.

Strategies for discovery and improvement of enzyme function: state of the art and opportunities

Developments in biocatalysis have been largely fuelled by consumer demands for new products, industrial attempts to improving existing process and minimizing waste, coupled with governmental measures to regulate consumer safety along with scientific advancements. One of the major hurdles to application of biocatalysis to chemical synthesis is unavailability of the desired enzyme to catalyse the reaction to allow for a viable process development. Even when the desired enzyme is available it often forces the process engineers to alter process parameters due to inadequacies of the enzyme, such as instability, inhibition, low yield or selectivity, etc. Developments in the field of enzyme or reaction engineering have allowed access to means to achieve the ends, such as directed evolution, de novo protein design, use of non‐conventional media, using new substrates for old enzymes, active‐site imprinting, altering temperature, etc. Utilization of enzyme discovery and improvement tools therefore provides a feasible means to overcome this problem. Judicious employment of these tools has resulted in significant advancements that have leveraged the research from laboratory to market thus impacting economic growth; however, there are further opportunities that have not yet been explored. The present review attempts to highlight some of these achievements and potential opportunities.