Alginate production and alg8 gene expression by Azotobacter vinelandii in continuous cultures

Little alginates synthesized in EPS: Evidences from high-throughput community and metagenes

As a significant structure in activated sludge, extracellular polymeric substances (EPS) hold considerable value regarding resource recovery and applications. The present study aimed to elucidate the relationship between the microbial community and the composition and properties of EPS. A biological nutrient removal (BNR) reactor was set up in the laboratory and controlled under different solid retention times (SRT), altering microbial species within the system. Then EPS was extracted from activated and analyzed by chemical and spectroscopic methods. High-throughput sequencing and metagenomic approaches were employed to investigate bacterial community and metabolic pathways. The results showed that lower SRT with a higher abundance of the family-level Proteobacteria (27.7%-53.5%) favored EPS synthesis, while another dominant group Bacteroidetes (20.0%-32.6%) may not significantly affect EPS synthesis. Furthermore, the abundance of alginates-producing bacteria including Pseudomonas spp. and Azotobacter vinelandii was only 2.53%-6.76% and 1.98%-6.34%, respectively. The alginate synthesis pathway genes Alg8 and Alg44 were also present at very low levels (0.05‱-0.11‱, 0.01‱-0.02‱, respectively). Another important gene related to alginates operons, AlgK, was absent across all the SRT-operated reactors. These findings suggest an impossible and incomplete alginate synthesis pathway within sludge. In light of these results, it can be concluded that EPS does not necessarily contain alginate components.

Advanced strategies for metabolic engineering of Bacillus to produce extracellular polymeric substances

Extracellular polymeric substances are mainly synthesized via a variety of biosynthetic pathways in bacteria. Bacilli-sourced extracellular polymeric substances, such as exopolysaccharides (EPS) and poly-γ-glutamic acid (γ-PGA), can serve as active ingredients and hydrogels, and have other important industrial applications. However, the functional diversity and widespread applications of these extracellular polymeric substances, are hampered by their low yields and high costs. Biosynthesis of extracellular polymeric substances is very complex in Bacillus, and there is no detailed elucidation of the reactions and regulations among various metabolic pathways. Therefore, a better understanding of the metabolic mechanisms is required to broaden the functions and increase the yield of extracellular polymeric substances. This review systematically summarizes the biosynthesis and metabolic mechanisms of extracellular polymeric substances in Bacillus, providing an in-depth understanding of the relationships between EPS and γ-PGA synthesis. This review provides a better clarification of Bacillus metabolic mechanisms during extracellular polymeric substance secretion and thus benefits their application and commercialization.

Bacterial exopolysaccharides: Chemical structures, gene clusters and genetic engineering

In recent decades, the composition, structure, biosynthesis, and function of bacterial extracellular polysaccharides (EPS) have been extensively studied. EPS are synthesized through different biosynthetic pathways. The genes responsible for EPS synthesis are usually clustered on the genome or large plasmids of bacteria. Generally, different EPS synthesis gene clusters direct the synthesis of EPS with different chemical structures and biological activities. A better understanding of the gene functions involved in EPS biosynthesis is critical for the production of EPS with special biological activities. Genetic engineering methods are usually used to study EPS synthesis related genes. This review organizes the available information on EPS, including their structures, synthesis of related genes, and highlights the research progress of modifying EPS gene clusters through gene-editing methods.

Gene expression abundance dictated exopolysaccharide modification in Rhizobium radiobacter SZ4S7S14 as the cell's response to salt stress

A molecular and metabolic behaviour of EPS-producing and salt-tolerant bacterium Rhizobium radiobacter SZ4S7S14 along with its practical application in salt-stress was investigated. The research target was identification and expression profiles of a large EPS biosynthesis gene cluster, possible structural modification of EPS under salt-stress effect and analysis of the gene(s) relative expression and structural modification correlation. As expected, transposons insertions were identified within or near the coding regions of exoK and exoM, previously known large gene cluster that is required for EPS I synthesis. Different expression levels of exoK and exoM in different salt-stress models resulted in structural modification of EPS, which was seen basically in monomers molar ratio. As a result of downregulation of the genes the strain produced EPS samples with monomers ratio: (1) Glu:Man:Gal:Xyl:Ara:Rha:Rib = 31.21:3.02:2.77:1:0.91:0.64:0.41 (in 0.25% NaCl); (2) Glu:Man:Gal:Xyl:Ara:Rha:Rib = 7.65:1:0.69:0.22:0.2:0.16:0.1 (in 0.5% NaCl); (3) Glu:Man:Gal:Ara:Xyl:Rha:Rib = 9.39:1.89:1:0.58:0.52:0.46:0.26 (in 1% NaCl); and (4) Glu:Man:Ara:Xyl:Rib:Gal = 7.9:2:2:1.58:1.1:1 (in 2.0% NaCl), whereas in control (without NaCl): Glc:Man:Gal:Xyl:Ara:Rha:Rib = 11.66:1:0.90:0.37:0.37:0.15:0.14. It was found that, salt-stress not only leads to downregulation of a large EPS biosynthesis gene cluster, including exoK and exoM genes, but also impacting on their relative expression degree, re-groups of the monomers within the EPS matrix and dictates molar ratio of the monosaccharides in the final metabolite.

Strategies to Obtain Designer Polymers Based on Cyanobacterial Extracellular Polymeric Substances (EPS)

Biopolymers derived from polysaccharides are a sustainable and environmentally friendly alternative to the synthetic counterparts available in the market. Due to their distinctive properties, the cyanobacterial extracellular polymeric substances (EPS), mainly composed of heteropolysaccharides, emerge as a valid alternative to address several biotechnological and biomedical challenges. Nevertheless, biotechnological/biomedical applications based on cyanobacterial EPS have only recently started to emerge. For the successful exploitation of cyanobacterial EPS, it is important to strategically design the polymers, either by genetic engineering of the producing strains or by chemical modification of the polymers. This requires a better understanding of the EPS biosynthetic pathways and their relationship with central metabolism, as well as to exploit the available polymer functionalization chemistries. Considering all this, we provide an overview of the characteristics and biological activities of cyanobacterial EPS, discuss the challenges and opportunities to improve the amount and/or characteristics of the polymers, and report the most relevant advances on the use of cyanobacterial EPS as scaffolds, coatings, and vehicles for drug delivery.

Poly(3-hydroxybutyrate) accumulation by Azotobacter vinelandii under different oxygen transfer strategies

Azotobacter vinelandii OP is a bacterium that produces poly(3-hydroxybutyrate) (PHB). PHB production in a stirred bioreactor, at different oxygen transfer strategies, was evaluated. By applying different oxygen contents in the inlet gas, the oxygen transfer rate (OTR) was changed under a constant agitation rate. Batch cultures were performed without dissolved oxygen tension (DOT) control (using 9% and 21% oxygen in the inlet gas) and under DOT control (4%) using gas blending. The cultures that developed without DOT control were limited by oxygen. As result of varying the oxygen content in the inlet gas, a lower OTR (4.6 mmol L^-1 h^-1) and specific oxygen uptake rate (11.6 mmol g^-1 h^-1) were obtained using 9% oxygen in the inlet gas. The use of 9% oxygen in the inlet gas was the most suitable for improving the intracellular PHB content (56 ± 6 w w^-1). For the first time, PHB accumulation in A. vinelandii OP cultures, developed with different OTRs, was compared under homogeneous mixing conditions, demonstrating that bacterial respiration affects PHB synthesis. These results can be used to design new oxygen transfer strategies to produce PHB under productive conditions.

Metabolic flux analysis and the NAD(P)H/NAD(P)+ ratios in chemostat cultures of Azotobacter vinelandii

BACKGROUND

Azotobacter vinelandii is a bacterium that produces alginate and polyhydroxybutyrate (P3HB); however, the role of NAD(P)H/NAD(P)+ ratios on the metabolic fluxes through biosynthesis pathways of these biopolymers remains unknown. The aim of this study was to evaluate the NAD(P)H/NAD(P) + ratios and the metabolic fluxes involved in alginate and P3HB biosynthesis, under oxygen-limiting and non-limiting oxygen conditions.

RESULTS

The results reveal that changes in the oxygen availability have an important effect on the metabolic fluxes and intracellular NADPH/NADP+ ratio, showing that at the lowest OTR (2.4 mmol L-1 h-1), the flux through the tricarboxylic acid (TCA) cycle decreased 27.6-fold, but the flux through the P3HB biosynthesis increased 6.6-fold in contrast to the cultures without oxygen limitation (OTR = 14.6 mmol L-1 h-1). This was consistent with the increase in the level of transcription of phbB and the P3HB biosynthesis. In addition, under conditions without oxygen limitation, there was an increase in the carbon uptake rate (twofold), as well as in the flux through the pentose phosphate (PP) pathway (4.8-fold), compared to the condition of 2.4 mmol L-1 h-1. At the highest OTR condition, a decrease in the NADPH/NADP+ ratio of threefold was observed, probably as a response to the high respiration rate induced by the respiratory protection of the nitrogenase under diazotrophic conditions, correlating with a high expression of the uncoupled respiratory chain genes (ndhII and cydA) and induction of the expression of the genes encoding the nitrogenase complex (nifH).

CONCLUSIONS

We have demonstrated that changes in oxygen availability affect the internal redox state of the cell and carbon metabolic fluxes. This also has a strong impact on the TCA cycle and PP pathway as well as on alginate and P3HB biosynthetic fluxes.

Different responses in the expression of alginases, alginate polymerase and acetylation genes during alginate production by Azotobacter vinelandii under oxygen-controlled conditions

Alginate production and gene expression of genes involved in alginate biosynthesis were evaluated in continuous cultures under dissolved oxygen tension (DOT) controlled conditions. Chemostat at 8% DOT showed an increase in the specific oxygen uptake rate [Formula: see text] from 10.9 to 45.3 mmol g^-1 h^-1 by changes in the dilution rate (D) from 0.06 to 0.10 h^-1, whereas under 1% DOT the [Formula: see text] was not affected. Alginate molecular weight was not affected by DOT. However, chemostat at 1% DOT showed a downregulation up to 20-fold in genes encoding both the alginate polymerase (alg8, alg44), alginate acetylases (algV, algI) and alginate lyase AlgL. alyA1 and algE7 lyases gene expressions presented an opposite behavior by changing the DOT, suggesting that A. vinelandii can use specific depolymerases depending on the oxygen level. Overall, the DOT level have a differential effect on genes involved in alginate synthesis, thus a gene expression equilibrium determines the production of alginates of similar molecular weight under DOT controlled.

The signaling protein MucG negatively affects the production and the molecular mass of alginate in Azotobacter vinelandii

Azotobacter vinelandii is a soil bacterium that produces the polysaccharide alginate. In this work, we identified a miniTn5 mutant, named GG9, which showed increased alginate production of higher molecular mass, and increased expression of the alginate biosynthetic genes algD and alg8 when compared to its parental strain. The miniTn5 was inserted within ORF Avin07920 encoding a hypothetical protein. Avin07910, located immediately downstream and predicted to form an operon with Avin07920, encodes an inner membrane multi-domain signaling protein here named mucG. Insertional inactivation of mucG resulted in a phenotype of increased alginate production of higher molecular mass similar to that of mutant GG9. The MucG protein contains a periplasmic and putative HAMP and PAS domains, which are linked to GGDEF and EAL domains. The last two domains are potentially involved in the synthesis and degradation, respectively, of bis-(3'-5')-cyclic dimeric GMP (c-di-GMP), a secondary messenger that has been reported to be essential for alginate production. Therefore, we hypothesized that the negative effect of MucG on the production of this polymer could be explained by the putative phosphodiesterase activity of the EAL domain. Indeed, we found that alanine replacement mutagenesis of the MucG EAL motif or deletion of the entire EAL domain resulted in increased alginate production of higher molecular mass similar to the GG9 and mucG mutants. To our knowledge, this is the first reported protein that simultaneous affects the production of alginate and its molecular mass.

Alginate Biosynthesis inAzotobacter vinelandii: Overview of Molecular Mechanisms in Connection with the Oxygen Availability

The Gram-negative bacteriumAzotobacter vinelandiican synthetize the biopolymer alginate that has material properties appropriate for plenty of applications in industry as well as in medicine. In order to settle the foundation for improving alginate production without compromising its quality, a better understanding of the polymer biosynthesis and the mechanism of regulation during fermentation processes is necessary. This knowledge is crucial for the development of novel production strategies. Here, we highlight the key aspects of alginate biosynthesis that can lead to producing an alginate with specific material properties with particular focus on the role of oxygen availability linked with the molecular mechanisms involved in the alginate production.

Bacterial exopolysaccharides: biosynthesis pathways and engineering strategies

Bacteria produce a wide range of exopolysaccharides which are synthesized via different biosynthesis pathways. The genes responsible for synthesis are often clustered within the genome of the respective production organism. A better understanding of the fundamental processes involved in exopolysaccharide biosynthesis and the regulation of these processes is critical toward genetic, metabolic and protein-engineering approaches to produce tailor-made polymers. These designer polymers will exhibit superior material properties targeting medical and industrial applications. Exploiting the natural design space for production of a variety of biopolymer will open up a range of new applications. Here, we summarize the key aspects of microbial exopolysaccharide biosynthesis and highlight the latest engineering approaches toward the production of tailor-made variants with the potential to be used as valuable renewable and high-performance products for medical and industrial applications.

Evaluation of gene expression and alginate production in response to oxygen transfer in continuous culture of Azotobacter vinelandii

Alginates are polysaccharides used as food additives and encapsulation agents in biotechnology, and their functional properties depend on its molecular weight. In this study, different steady-states in continuous cultures of A. vinelandii were established to determine the effect of the dilution rate (D) and the agitation rate on alginate production and expression of genes involved in alginate polymerization and depolymerization. Both, the agitation and dilution rates, determined the partitioning of the carbon utilization from sucrose into alginate and CO₂ under oxygen-limiting conditions. A low D (0.07 h⁻¹) and 500 rpm resulted in the highest carbon utilization into alginate (25%). Quantitative real-time polymerase chain reaction was used to determine the transcription level of six genes involved in alginate polymerization and depolymerization. In chemostat cultures at 0.07 h⁻¹, the gene expression was affected by changes in the agitation rate. By increasing the agitation rate from 400 to 600 rpm, the algE7 gene expression decreased tenfold, whereas alyA1, algL and alyA2 gene expression increased between 1.5 and 2.8 times under similar conditions evaluated. Chemostat at 0.07 h⁻¹ showed a highest alginate molecular weight (580 kDa) at 500 rpm whereas similar molecular weights (480 kDa) were obtained at 400 and 600 rpm. The highest molecular weight was not explained by changes in the expression of alg8 and alg44 (genes involved in alginate polymerization). Nonetheless, a different expression pattern observed for lyases could explain the highest alginate molecular weight obtained. Overall, the results suggest that the control of alginate molecular weight in A. vinelandii cells growing in continuous mode is determined by a balance between the gene expression of intracellular and extracellular lyases in response to oxygen availability. These findings better our understanding of the biosynthesis of bacterial alginate and help us progress toward obtain tailor-made alginates.

Differential effect of culture temperature and specific growth rate on CHO cell behavior in chemostat culture

Mild hypothermia condition in mammalian cell culture technology has been one of the main focuses of research for the development of breeding strategies to maximize productivity of these production systems. Despite the large number of studies that show positive effects of mild hypothermia on specific productivity of r-proteins, no experimental approach has addressed the indirect effect of lower temperatures on specific cell growth rate, nor how this condition possibly affects less specific productivity of r-proteins. To separately analyze the effects of mild hypothermia and specific growth rate on CHO cell metabolism and recombinant human tissue plasminogen activator productivity as a model system, high dilution rate (0.017 h⁻¹) and low dilution rate (0.012 h⁻¹) at two cultivation temperatures (37 and 33°C) were evaluated using chemostat culture. The results showed a positive effect on the specific productivity of r-protein with decreasing specific growth rate at 33°C. Differential effect was achieved by mild hypothermia on the specific productivity of r-protein, contrary to the evidence reported in batch culture. Interestingly, reduction of metabolism could not be associated with a decrease in culture temperature, but rather with a decrease in specific growth rate.

Production of alginate by Azotobacter vinelandii grown at two bioreactor scales under oxygen-limited conditions

The oxygen transfer rate (OTR) was evaluated as a scale-up criterion for alginate production in 3- and 14-L stirred fermentors. Batch cultures were performed at different agitation rates (200, 300, and 600 rpm) and airflow rates (0.25, 0.5, and 1 vvm), resulting in different maximum OTR levels (OTRmax). Although the two reactors had a similar OTRmax (19 mmol L(-1) h(-1)) and produced the same alginate concentration (3.8 g L(-1)), during the cell growth period the maximum molecular weight of the alginate was 1,250 kDa in the 3-L stirred fermentor and 590 kDa in 14-L stirred fermentor. The results showed for the first time the evolution of the molecular weight of alginate and OTR profiles for two different scales of stirred fermentors. There was a different maximum specific oxygen uptake rate between the two fermenters, reaching 8.3 mmol g(-1) h(-1) in 3-L bioreactor and 10.6 mmol g(-1) h(-1) in 14-L bioreactor, which could explain the different molecular weights observed. These findings open the possibility of using [Formula: see text] instead of OTRmax as a scaling criterion to produce polymers with similar molecular weights during fermentation.

Microbial alginate production, modification and its applications

Alginate is an important polysaccharide used widely in the food, textile, printing and pharmaceutical industries for its viscosifying, and gelling properties. All commercially produced alginates are isolated from farmed brown seaweeds. These algal alginates suffer from heterogeneity in composition and material properties. Here, we will discuss alginates produced by bacteria; the molecular mechanisms involved in their biosynthesis; and the potential to utilize these bacterially produced or modified alginates for high-value applications where defined material properties are required.

Expression of alginases and alginate polymerase genes in response to oxygen, and their relationship with the alginate molecular weight in Azotobacter vinelandii

The transcription of genes involved in alginate polymerization and depolymerization, as well as the alginase activity (extracellular and intracellular) under oxygen-limited and non oxygen-limited conditions in cultures of A. vinelandii, was studied. Two levels of dissolved oxygen tension (DOT) (1% and 5%, oxygen-limited and non-oxygen-limited, respectively) strictly controlled by gas blending, were evaluated in a wild type strain. In cultures at low DOT (1%), in which a high molecular weight alginate (1200 kDa) was synthesized, the transcription levels of alg8 and alg44 (genes encoding alginate polymerase complex), and algX (encoding a protein involved in polymer transport through periplasmic space) were considerably higher as compared to cultures conducted at 5% DOT, under which an alginate with a low MW (42 kDa) was produced. In the case of genes encoding for intracellular and extracellular alginases, the levels of these transcripts were higher at 1% DOT. However, intracellular and extracellular alginase activity were lower (0.017 and 0.01 U/mg protein, respectively) in cultures at 1% DOT, as compared with the activities measured at 5% DOT (0.027 and 0.052 U/mg protein for intracellular and extracellular maximum activity, respectively). The low alginase activity measured in cultures at 1% DOT and the high level of transcription of genes constituting alginate polymerase complex might be mechanisms by which oxygen regulates the production of alginates with a high MW.

The acetylation degree of alginates in Azotobacter vinelandii ATCC9046 is determined by dissolved oxygen and specific growth rate: studies in glucose-limited chemostat cultivations

Alginates are polysaccharides that may be used as viscosifiers and gel or film-forming agents with a great diversity of applications. The alginates produced by bacteria such as Azotobacter vinelandii are acetylated. The presence of acetyl groups in this type of alginate increases its solubility, viscosity, and swelling capability. The aim of this study was to evaluate, in glucose-limited chemostat cultivations of A. vinelandii ATCC9046, the influence of dissolved oxygen tension (DO) and specific growth rate (μ) on the degree of acetylation of alginates produced by this bacterium. In glucose-limited chemostat cultivations, the degree of alginate acetylation was evaluated under two conditions of DO (1 and 9 %) and for a range of specific growth rates (0.02-0.15 h⁻¹). In addition, the alginate yields and PHB production were evaluated. High DO in the culture resulted in a high degree of alginate acetylation, reaching a maximum acetylation degree of 6.88 % at 9 % DO. In contrast, the increment of μ had a negative effect on the production and acetylation of the polymer. It was found that at high DO (9 %) and low μ, there was a reduction of the respiration rate, and the PHB accumulation was negligible, suggesting that the flux of acetyl-CoA (the acetyl donor) was diverted to alginate acetylation.