Ionic liquids as a reaction medium for lipase-catalyzed methanolysis of sunflower oil

Enhanced activity of Candida antarctica lipase B in cholinium aminoate ionic liquids: a combined experimental and computational analysis

As a class of ionic liquids with higher biocompatibility, cholinium aminoates ([Cho][AA]) hold potential as solvation media for enzymatic bioprocessing. Herein, solvation effect of [Cho][AA] on structural stability and enzymatic activity of Candida antarctica lipase B (CALB) was evaluated using experimental and computational approaches. Influence of [Cho][AA] on CALB stability was investigated using amino acid anions ([AA]-) with varying hydrophobicity levels. Choline phenylalaninate ([Cho][Phe]) resulted in 109.1% and 110.4% of relative CALB activity to buffer medium at 25 °C and 50 °C, respectively. Simulation results revealed the improvement of CALB's enzymatic activities by [AA]- with a strong hydrophobic character. Shielding of CALB from water molecules by [AA]- was observed. The level of CALB activity was governed by accumulation level of [AA]- at CALB's first hydration layer. The stronger interaction between His224 and Asp187 was postulated to be driven by [Cho][AA], resulting in the activity enhancement of CALB. The slight improvement of CALB activity in 0.05 M [Cho][Phe] at 50 °C could be due to the larger size of entrance to the catalytic site and the stronger interaction between the catalytic residues. The promising effect of [Cho][Phe] on CALB activation may stimulate research efforts in designing a 'fully green' bioreaction for various industrial applications.Communicated by Ramaswamy H. Sarma.

Sources, purification, immobilization and industrial applications of microbial lipases: An overview

Microbial lipase is looking for better attention with the fast growth of enzyme proficiency and other benefits like easy, cost-effective, and reliable manufacturing. Immobilized enzymes can be used repetitively and are incapable to catalyze the reactions in the system continuously. Hydrophobic supports are utilized to immobilize enzymes when the ionic strength is low. This approach allows for the immobilization, purification, stability, and hyperactivation of lipases in a single step. The diffusion of the substrate is more advantageous on hydrophobic supports than on hydrophilic supports in the carrier. These approaches are critical to the immobilization performance of the enzyme. For enzyme immobilization, synthesis provides a higher pH value as well as greater heat stability. Using a mixture of immobilization methods, the binding force between enzymes and the support rises, reducing enzyme leakage. Lipase adsorption produces interfacial activation when it is immobilized on hydrophobic support. As a result, in the immobilization process, this procedure is primarily used for a variety of industrial applications. Microbial sources, immobilization techniques, and industrial applications in the fields of food, flavor, detergent, paper and pulp, pharmaceuticals, biodiesel, derivatives of esters and amino groups, agrochemicals, biosensor applications, cosmetics, perfumery, and bioremediation are all discussed in this review.

Current State and Perspectives on Transesterification of Triglycerides for Biodiesel Production

Triglycerides are the main constituents of lipids, which are the fatty acids of glycerol. Natural organic triglycerides (viz. virgin vegetable oils, recycled cooking oils, and animal fats) are the main sources for biodiesel production. Biodiesel (mono alkyl esters) is the most attractive alternative fuel to diesel, with numerous environmental advantages over petroleum-based fuel. The most practicable method for converting triglycerides to biodiesel with viscosities comparable to diesel fuel is transesterification. Previous research has proven that biodiesel–diesel blends can operate the compression ignition engine without the need for significant modifications. However, the commercialization of biodiesel is still limited due to the high cost of production. In this sense, the transesterification route is a crucial factor in determining the total cost of biodiesel production. Homogenous base-catalyzed transesterification, industrially, is the conventional method to produce biodiesel. However, this method suffers from limitations both environmentally and economically. Although there are review articles on transesterification, most of them focus on a specific type of transesterification process and hence do not provide a comprehensive picture. This paper reviews the latest progress in research on all facets of transesterification technology from reports published by highly-rated scientific journals in the last two decades. The review focuses on the suggested modifications to the conventional method and the most promising innovative technologies. The potentiality of each technology to produce biodiesel from low-quality feedstock is also discussed.

Ionic liquids for regulating biocatalytic process: Achievements and perspectives

Biocatalysis has found enormous applications in sorts of fields as an alternative to chemical catalysis. In the pursue of green and sustainable chemistry, ionic liquids (ILs) have been considered as promising reaction media for biocatalysis, owing to their unique characteristics, such as nonvolatility, inflammability and tunable properties as regards polarity and water miscibility behavior, compared to organic solvents. In recent years, great developments have been achieved in respects to biocatalysis in ILs, especially for preparing various chemicals. This review tends to give illustrative examples with a focus on representative chemicals production by biocatalyst in ILs and elucidate the possible mechanism in such systems. It also discusses how to regulate the catalytic efficiency from several aspects and finally provides an outlook on the opportunities to broaden biocatalysis in ILs.

Enzymatic catalysis for sustainable production of high omega-3 triglyceride oil using imidazolium-based ionic liquids

Two different fish oil preparations, namely triglycerides and ethyl esters containing, respectively, 30.02% and 74.38% of omega-3 fatty acids, were employed as the substrates for transesterification. Catalyzed by immobilized lipase using imidazolium-based ionic liquid systems, the total content of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) in the resulting triglyceride reached 63.60% when 4% hydrophobic ionic liquid was used, which was 11.74% higher than that of the triglyceride produced in a solvent-free reaction system. The activation energy of the product (triglyceride-type fish oil) was 173.64 KJ mol-1, which was not significantly different from that of the commercial ethyl ester-type fish oil, so were the other thermal oxidative kinetic parameters. The kinetic parameters depicting the thermal and oxidative stability of the fish oil product provide the basis for industrial processing, storage, and applications.

Influence of ionic liquids on lipase activity and stability in alcoholysis reactions

Lipase activity and stability in ionic liquids containing N,N-dialkylimidazolium cations and different anions were investigated in alcoholysis reactions.

The phytotoxicity of ionic liquids from natural pool of (-)-menthol with tetrafluoroborate anion

Over the last several decades, ionic liquids have become a promising alternative to conventional organic solvents. Initially, ionic liquids were described as "environmentally friendly" substances. However, the results of numerous studies proved that the effects of these compounds on individual ecosystems might be adverse. The presented paper discusses the effect of ionic salts containing natural chiral substituent: (1R,2S,5R)-(-)-menthol in cation and a tetrafluoroborate anion of a general formula of [Cn-Im-Men][BF4] of implementation into the soil on the growth of spring barley and common radish in their early development stages. The obtained results showed that the greatest phytotoxicity was exhibited by ionic liquids containing substituents with the smallest possible number of carbon atoms. The further increase in the length of the chain did not increase the toxicity of these salts for terrestrial plants. Moreover, a compound with a substituent having a chain length of 11 carbon atoms was found to be non-toxic to common radish. The experiment under discussion showed also the effect of these tetrafluoroborates, used in the form of spray, on the development of common sorrel, gallant soldier and white goosefoot. The tests carried out also showed that the most toxic were the compounds with 1 and 3 carbon atoms. The phytotoxicity of tetrafluoroborates was positively correlated with the concentration of these compounds in the soil and was dependent on the genetic features of the genres and varieties of plants used in the experiment.

Immobilised lipase on structured supports containing covalently attached ionic liquids for the continuous synthesis of biodiesel in scCO2

Different nanostructured supports, based on 1-decyl-2-methyimidazolium cations covalently attached to a polystyrene divinylbenzene porous matrix, were used as carriers to immobilise Candida antarctica lipase B. The suitability of these immobilised lipase derivatives for the synthesis of biodiesel (methyl oleate) by the methanolysis of triolein has been tested in both tert-butanol and supercritical (sc)CO(2) (18 MPa, 45 °C) as reaction media. The use of modified supports with low ionic-liquid loading covalently attached to the main polymeric backbone chains provide structured materials that led to the best biodiesel yields (up to 95 %) and operational stability (85 % biodiesel yield after 45 cycles of 8-4 h) in scCO(2) (45 °C, 18 MPa). The presence of tert-butanol as an inert cosolvent in the scCO(2) phase at the same concentration as triolein was key to avoid poisoning the biocatalyst through the blockage of its active sites by the polar byproduct (glycerol) produced in the biodiesel synthesis.

Biodiesel synthesis and conformation of lipase from Burkholderia cepacia in room temperature ionic liquids and organic solvents

Biodiesel synthesis and conformation of Burkholderia cepacia lipase (BCL) were studied in 19 different room temperature ionic liquids (RTLLs) with a range of cation and anion structures. Overall, anion selection had a greater influence on biodiesel conversion than cation choice. RTILs containing Tf2N- and PF6- anions were suitable reaction media, while RTIL of [OmPy][BF4] was the best reaction medium with a biodiesel yield of 82.2±1.2%. RTILs with strong water miscible properties showed very low biodiesel yields. Conformational analysis by FT-IR revealed that higher biodiesel conversion in RTILs was correlated with a low tendency in α-helix content of BCL. An ultrasound-assisted biocatalysis process in RTILs was used to improve mass transfer rate, leading to 83% reduction of the reaction time for biodiesel production.

Penicillium expansum lipase-catalyzed production of biodiesel in ionic liquids

Penicillium expansum lipase (PEL) was used to catalyze biodiesel production from corn oil in [BMIm][PF(6)](1) (an ionic liquid, IL) and tert-butanol. Both systems were optimized in terms of MeOH/oil molar ratio, reaction temperature, enzyme loading, solvent volume, and water content. The high conversion obtained in the IL (86%) as compared to that in tert-butanol (52%) demonstrates that the IL is a superior solvent for PEL-catalyzed biodiesel production. Poor yields were obtained in a series of hydrophilic ILs. Addition of salt hydrates affected biodiesel production predominantly through the specific ion (Hofmeister) effect. The impact of methanol on both activity and stability of PEL in the IL and in hexane was investigated, in comparison to the results obtained by two commonly used lipases, Novozym 435 and Lipozyme TLIM. The results substantiate that while different lipases show different resistance to methanol in different reaction systems, PEL is tolerant to methanol in both systems.

New eutectic ionic liquids for lipase activation and enzymatic preparation of biodiesel

The enzymatic preparation of biodiesel has been hampered by the lack of suitable solvents with desirable properties such as high lipase compatibility, low cost, low viscosity, high biodegradability, and ease of product separation. Recent interest in using ionic liquids (ILs) as advanced reaction media has led to fast reaction rates and high yields in the enzymatic synthesis of biodiesel. However, conventional (i.e., cation-anion paired) ILs based on imidazolium and other quaternary ammonium salts remain too expensive for wide application at industrial scales. In this study, we report on newly-synthesized eutectic ILs derived from choline acetate or choline chloride coupled with biocompatible hydrogen-bond donors, such as glycerol. These eutectic solvents have favorable properties including low viscosity, high biodegradability, and excellent compatibility with Novozym(®) 435, a commercial immobilized Candida antarctica lipase B. Furthermore, in a model biodiesel synthesis system, we demonstrate high reaction rates for the enzymatic transesterification of Miglyol(®) oil 812 with methanol, catalyzed by Novozym(®) 435 in choline acetate/glycerol (1:1.5 molar ratio). The high conversion (97%) of the triglyceride obtained within 3 h, under optimal conditions, suggests that these novel eutectic solvents warrant further exploration as potential media in the enzymatic production of biodiesel.

Activation and stabilization of enzymes in ionic liquids

As environmentally benign "green" solvents, room temperature ionic liquids (ILs) have been used as solvents or (co)solvents in biocatalytic reactions and processes for a decade. The technological utility of enzymes can be enhanced greatly by their use in ionic liquids (ILs) rather than in conventional organic solvents or in their natural aqueous reaction media. In fact, the combination of green properties and unique tailor-made physicochemical properties make ILs excellent non-aqueous solvents for enzymatic catalysis with numerous advantages over other solvents, including high conversion rates, high selectivity, better enzyme stability, as well as better recoverability and recyclability. However, in many cases, particularly in hydrophilic ILs, enzymes show relative instability and/or lower activity compared with conventional solvents. To improve the enzyme activity as well as stability in ILs, various attempts have been made by modifying the form of the enzymes. Examples are enzyme immobilization onto support materials via adsorption or multipoint attachment, lyophilization in the presence of stabilizing agents, chemical modification with stabilizing agents, formation of cross-linked enzyme aggregates, pretreatment with polar organic solvents or enzymes combined with suitable surfactants to form microemulsions. The use of these enzyme preparations in ILs can dramatically increase the solvent tolerance, enhance activity as well as stability, and improve enantioselectivity. This perspective highlights a number of pronounced strategies being used successfully for activation and stabilization of enzymes in non-aqueous ILs media. This review is not intended to be comprehensive, but rather to present a general overview of the potential approaches to activate enzymes for diverse enzymatic processes and biotransformations in ILs.