A low cost PS based microfluidic platform to investigate cell cycle towards developing a therapeutic strategy for cancer

Fabrication Protocol for Thermoplastic Microfluidic Devices: Nanoliter Volume Bioreactors for Cell Culturing

Microfluidic devices consist of microchannels etched or embossed into substrates made of polymer, glass or silicon. Intricate connections of the microchannels to reactors with some smart mechanical structures such as traps or curvatures fulfil the desired functionalities such as mixing, separation, flow control or setting the environment for biochemical reactions. Here, we describe the fabrication methods of a thermoplastic microbioreactor step by step. First, material selection is made, then, production methods are determined with the equipment that can be easily procured in a laboratory. COP with its outstanding characteristics among many polymers was chosen. Two types of microbioreactors, with and without electrodes, are designed with AutoCAD and L-edit softwares. Photolithography and electrochemical wet etching are used for master mold preparation. Thermal evaporator is employed for pure chromium and gold deposition on COP substrate and etchants are used to form the interdigitated electrodes. Once the master mold produced, hot embossing is used to obtain the designed shape on drilled and planarized COP. Cover COP, with or without electrodes, is bonded to the hot embossed COP via thermo-compression and thermoplastic microfluidic device is realized. Tubings are connected to the device and a bridge between the macro and micro world is established. Yeast or mammalian cells labeled or tagged with GFP/RFP on specific gene products are loaded into the microfluidic device, and real time data on cell dimensions and fluorescence intensity are collected using inverted fluorescence microscope, and finally image processing is used to analyze the acquired data.

Thermoplastic microfluidic bioreactors with integrated electrodes to study tumor treating fields on yeast cells

Tumor-treating fields (TTFields) are alternating electrical fields of intermediate frequency and low intensity that can slow or inhibit tumor growth by disrupting mitosis division of cancerous cells through cell cycle proteins. In this work, for the first time, an in-house fabricated cyclo-olefin polymer made microfluidic bioreactors are integrated with Cr/Au interdigitated electrodes to test TTFields on yeast cells with fluorescent protein:Nop56 gene. A small gap between electrodes (50 μm) allows small voltages (<150 mV) to be applied on the cells; hence, uninsulated gold electrodes are used in the non-faradaic region without causing any electrochemical reaction at the electrode-medium interface. Electrochemical modeling as well as impedance characterization and analysis of the electrodes are done using four different cell nutrient media. The experiments with yeast cells are done with 150 mV, 150 kHz and 30 mV, 200 kHz sinusoidal signals to generate electrical field magnitudes of 6.58 V/cm and 1.33 V/cm, respectively. In the high electrical field experiment, the cells go through electroporation. In the experiment with the low electrical field magnitude for TTFields, the cells have prolonged mitosis from typical 80-90 min to 200-300 min. Our results confirm the validity of the electrochemical model and the importance of applying a correct magnitude of the electrical field. Compared to the so far reported alternatives with insulated electrodes, the here developed thermoplastic microfluidic bioreactors with uninsulated electrodes provide a new, versatile, and durable platform for in vitro cell studies toward the improvement of anti-cancer therapies including personalized treatment.