New Copper Complex on Fe3O4 Nanoparticles as a Highly Efficient Reusable Nanocatalyst for Synthesis of Polyhydroquinolines in Water

Removal, mechanistic and kinetic studies of Cr(VI), Cd(II), and Pb(II) cations using Fe3O4 functionalized Schiff base chelating ligands

The Schiff base chelating ligands; (E)-2-(3,3-dimethoxy-2-oxa-7,10-diaza-3-silaundec-10-en-11-yl)phenol (L1), (E)-N-(2-((pyridine-2ylmethylene)amino)ethyl)-3-(trimethoxysilyl)propan-1-amine (L2) and (E)-N-(2-((thiophen-2-ylmethylene)amino)ethyl)-3-(trimethoxysilyl)propan-1-amine (L3) were immobilized on Fe3O4 magnetic nanoparticles (MNPs) and utilized in the extraction of Cr(VI), Cd(II) and Pb(II) metal cations from aqueous solutions. The compounds synthesized, denoted as L1@ Fe3O4, L2@Fe3O4, and L3@Fe3O4, were characterized using FT-IR spectroscopy, TEM-SEM, VSM, and BET/BHJ techniques for analysis of functional groups, surface morphology, magnetic properties, and degree of porosity of the adsorbents, respectively. BET/BHJ technique confirmed the mesoporous nature of the compounds as their pore diameters ranged between 15 and 17 nm. The initial optimization conditions of pH, adsorbent dosage, initial metal concentration, and contact time on adsorption were studied using L1@ Fe3O4. The optimum efficiencies recorded were 68% and 46% for Cr(VI) and Cd(II), respectively, obtained at pH 3, and a metal concentration of 20 ppm while an efficiency of 99% was recorded for Pb(II) cations at pH 7 and a metal concentration of 100 ppm. Compounds L2@Fe3O4 and L3@ Fe3O4 were also used in the extraction of metal cations from aqueous solution and gave efficiencies of 22%, 56%, and 78% for L2@ Fe3O4 and 19%, 90%, and 59% using L3@ Fe3O4 for Cr(VI), Cd(II), and Pb(II), respectively. The maximum adsorption capacities of L1@ Fe3O4 for Cr(VI), Cd(II), and Pb(II) cations were obtained from the Langmuir isotherm as 32.84, 41.77, and 450.45 mg/g, respectively. The experimental data was analyzed using pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich kinetic models. Both linear and non-linear forms of kinetic isotherms; Langmuir, Freundlich, Redlich-Peterson, and Temkin were utilized to investigate the nature of adsorption on L1@Fe3O4. The mechanistic studies deduced that the Langmuir isotherm and pseudo-second-order kinetic model better described the adsorption process both yielding high correlation coefficient values (R2 > 0.98).

Fabrication of a novel magnetic nanostructure based on cellulose-gellan gum hydrogel, embedded with MgAl LDH as an efficient catalyst for the synthesis of polyhydroquinoline derivatives

Nanocatalysts play a vital role in chemical reactions, energy conservation, and pollution control. They significantly contribute to organic synthesis by using natural polymers as nanoparticle substrates in nanocatalysts. Natural hydrogels made from polysaccharide and/or protein sources may be used to accomplish this. Recent research has focused on using layered double-hydroxides (LDHs) in composites having catalytic properties. Magnetic features of the catalyst allow its extraction from the environment using a magnet after the reaction, improving product efficiency. This work developed a catalyst for producing physiologically relevant polyhydroquinoline derivatives using a novel magnetic nanocomposite containing natural cellulose-gellan gum hydrogel and MgAl LDH. The Cell-GG hydrogel/MgAl LDH/Fe3O4 nanocomposite showed over 90 % efficiency in one-pot production of polyhydroquinoline derivatives by asymmetric Hantzsch condensation. Dimedone, ammonium acetate, ethyl acetoacetate, and different substituted aldehydes were employed in successive processes to create polyhydroquinoline derivatives. High product efficiency, quick reaction time, room temperature functioning, and easy separation with a magnet suggest a potent catalyst. Interestingly, the catalyst retains 80 % of its original capability after four cycles. Additionally, the Cell-GG hydrogel/MgAl LDH/Fe3O4 nanocomposite was analyzed using several methods, including FT-IR, FE-SEM, EDX, XRD, VSM and TGA, to obtain insight into its chemical and physical characteristics.

Development of new magnetic nanocomposite designed by reduced graphene oxide aerogel and HKUST-1, and its catalytic application in the synthesis of polyhydroquinoline and 1,8-dioxo-decahydroacridine derivatives

In this study, new magnetic reduced graphene oxide aerogel/HKUST-1 nanocomposite was designed and synthesized given the transformation of graphene oxide sheets to three-dimensional reduced graphene oxide aerogel, the in-situ magnetization of aerogel substrate, and the in-situ formation of HKUST-1 particles. Apart from characterizing the chemistry and structure of the designed magnetic nanocomposite (FT-IR, EDX, ICP, FE-SEM, DLS, XRD, VSM, and TG analyses), its catalytic performance was evaluated in the one-pot synthesis of biologically active 1,8-dioxo-decahydroacridine and polyhydroquinoline derivatives. The combination of magnetized reduced graphene oxide aerogel and HKUST-1 in the form of a new heterogeneous magnetic nanocatalyst was accompanied by a high synergetic catalytic effect in the symmetric and unsymmetrical Hantzsch condensation reactions. Compared to previous research studies, the pharmaceutical 1,8-dioxo-decahydroacridine and polyhydroquinoline derivatives can be synthesized using a partial amount of this nanocatalyst with a high percentage of yields in a short reaction time.

Graphene oxide immobilized 2-morpholinoethanamine as a versatile acid-base catalyst for synthesis of some heterocyclic compounds and molecular docking study

In this study, a new heterogeneous catalyst was synthesized based on graphene oxide (GO) as a natural material. On the surface of nanosheet graphene oxide, 2-Morpholinoethanamine was immobilized using a non-toxic, green, and simple method. This resulted in the preparation of a bifunctional acid-base nanocatalyst. The synthesized composite was fully characterized using various methods, including Fourier transform infrared spectrometry (FT-IR), scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), mapping, Raman spectroscopy, X-ray diffractometry (XRD), thermogravimetric analysis (TGA), and CHN elemental analysis. The catalytic reactivity of GO-mor was investigated in the one-pot synthesis of some benzo[b]pyran, pyrano[3,2-c]chromene, and polyhydroquinoline derivatives, yielding good efficiency and short reaction times. In addition, several recent studies have shown that some derivatives of pyran, chromene, and quinoline have remarkable anti COVID activity. Particularly, COVID-19 3CLpro/Mpro is considered a potential target for the treatment of this virus. For this purpose, docking models were constructed using the corresponding crystal structures with the synthesized derivatives. Based on the docking score and similarity of the binding mode to remdesivir and elvitegravir (the only approved drugs for the treatment of COVID-19), A2, B1, and C4 were selected as promising candidates for further research.

Ionic liquid immobilized on modified magnetic FSM-16: an efficient and magnetically recoverable nanocatalyst

In the present article, a nanocomposite was prepared by immobilizing ionic liquid on the magnetic mesoporous FSM-16 with a core-shell structure (Fe3O4@FSM-16-SO3/IL). Subsequently, the structural properties of the synthesized nanocatalyst were characterized and analyzed by various techniques such as XRD, FT-IR, TEM, FE-SEM, BET, VSM, TGA, and EDS. Fe3O4@FSM-16-SO3/IL was used as a recoverable and efficient nanocatalyst for the synthesis of polyhydroquinoline derivatives. The magnetic nanocatalyst showed remarkable stability and reusability and was reused six consecutive times without considerable loss of its activity.

Fast synthesis of [1,2,3]-triazole derivatives on a Fe/Cu-embedded nano-catalytic substrate

Triazoles are biologically important compounds that play a crucial role in biomedical applications. In this study, we present an innovative and eco-friendly nanocatalyst system for synthesizing compounds via the click reaction. The system is composed of Arabic gum (AG), iron oxide magnetic nanoparticles (Fe3O4 MNPs), (3-chloropropyl) trimethoxysilane (CPTMS), 2-aminopyridine (AP), and Cu(i) ions. Using AP as an anchor for Cu(i) ions and Fe3O4 MNPs allows facile separation using an external magnet. The hydrophilic nature of the Fe3O4@AG/AP-Cu(i) nanocomposite makes it highly efficient in water as a green solvent. The highest reaction efficiency (95.0%) was achieved in H2O solvent with 50.0 mg of nanocatalyst for 60 min at room temperature. The reaction yield remained consistent for six runs, demonstrating the stability and effectiveness of the catalyst.

Synthesis of Fe3O4@SiO2@Pr-NH2@DAP as a magnetic recyclable nano-catalyst for efficient synthesis of pyranothiazolopyrimidines and 4H-pyrans under solvent-free condition

In this research, we describe the synthesis of silica-coated nano-Fe3O4 particles, which were successfully modified by diaminopyrimidine, and their physicochemical properties were characterized using FT-IR, XRD, TEM, FE-SEM, EDX, EDX-mapping, and TGA. The catalytic activity of this novel nano-catalyst was evaluated by three-component reactions for the preparation of pyranothiazolopyrimidines and 4H-pyrans under solvent-free conditions. Recyclability of the catalyst up to six consecutive rounds, atom economy, high yield and purity of desired products, and easy work-up method are some of the exciting features of this system that make it more favorable from a green chemistry point of view.

Synthesis and characterization of an Fe-MOF@Fe3O4 nanocatalyst and its application as an organic nanocatalyst for one-pot synthesis of dihydropyrano[2,3-c]chromenes

In this study, the recyclable heterogeneous cluster bud Fe-MOF@Fe₃O₄ 'nanoflower' composite (CB Fe-MOF@Fe₃O₄ NFC) was successfully synthesized using Fe(NO₃)₃·9H₂O, 8-hydroxyquinoline sulfate monohydrate, and Fe₃O₄ nanoparticles by microwave irradiation. The as-prepared CB Fe-MOF@Fe₃O₄ NFC was characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), vibrational sampling magnetometry (VSM), and Fourier transform infrared spectroscopy (FTIR). The CB Fe-MOF@Fe₃O₄ NFC samples proved to have excellent catalytic activity. The activity of the CB Fe-MOF@Fe₃O₄ NFC nanocatalyst was explored in the synthesis of dihydropyrano[3, 2-c]chromene derivatives via a three-component reaction of 4-hydroxycoumarin, malononitrile, and a wide range of aromatic aldehyde compounds. Optimized reaction conditions had several advantages, including the use of water as a green solvent, environmental compatibility, simple work-up, reusability of the catalyst, low catalyst loading, faster reaction time, and higher yields.

One-pot three-component synthesis of 1-amidoalkyl naphthols and polyhydroquinolines using a deep eutectic solvent: a green method and mechanistic insight

The multicomponent synthesis of 1-amidoalkyl naphthols and polyhydroquinolines has been developed as an atom-economic procedure catalyzed by a deep eutectic solvent ([CholineCl][ZnCl₂]₃).