Cu-Mn Bimetallic Complex Immobilized on Magnetic NPs as an Efficient Catalyst for Domino One-Pot Preparation of Benzimidazole and Biginelli Reactions from Alcohols

Recent Advances in Nanocatalyzed One-Pot Sustainable Synthesis of Bioactive N, N-Heterocycles with Anticancer Activities: An Outlook of Medicinal Chemistry

N-heterocycles represent a predominant and unique class of organic chemistry. They have received a lot of attention due to their important chemical, biomedical, and industrial uses. Food and Drug Administration (FDA) approved about 75% of drugs containing N-based heterocycles, which are currently available in the market. N-Heterocyclic compounds exist as the backbone of numerous natural products and act as crucial intermediates for the construction of pharmaceuticals, veterinary items, and agrochemicals frequently. Among N-based heterocyclic compounds, bioactive N,N-heterocycles constitute a broad spectrum of applications in modern drug discovery and development processes. Cefozopran (antibiotic), omeprazole (antiulcer), enviradine (antiviral), liarozole (anticancer), etc., are important drugs containing N,N-heterocycles. The synthesis of N,N-heterocyclic compounds under sustainable conditions is one of the most active fields because of their significant physiological and biological properties as well as synthetic utility. Current research is demanding the development of greener, cheaper, and milder protocols for the synthesis of N,N-heterocyclic compounds to save mother nature by avoiding toxic metal catalysts, extensive application of energy, and the excessive use of hazardous materials. Nanocatalysts play a profound role in sustainable synthesis because of their larger surface area, tiny size, and minimum energy; they are eco-friendly and safe, and they provide higher yields with selectivity in comparison to conventional catalysts. It is increasingly demanding research to design and synthesize novel bioactive compounds that may help to combat cancer since the major causes of death worldwide are due to cancer. Hence, the important uses of nanocatalysts for the one-pot synthesis of biologically potent N,N-heterocycles with anticancer activities have been presented in this review.

Green synthesis of benzimidazole derivatives using copper(II)-supported on alginate hydrogel beads

The study addresses the challenge of developing sustainable and efficient catalytic systems for the synthesis of benzimidazole derivatives, which are of significant importance in the field of medicinal chemistry due to their diverse biological activities. The objective is to develop a recyclable and environmentally friendly catalyst utilizing copper(II)-loaded alginate hydrogel beads, which can facilitate the synthesis of these compounds while minimizing environmental impact. The preparation process entails crosslinking sodium alginate with copper(II) ions to form hydrogel beads, which are then washed and characterized through techniques such as scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), Inductively coupled plasma (ICP), and Zeta potential to analyses the morphology, composition and porosity of the beads. The catalytic performance is evaluated through recycling tests, which demonstrate the catalyst's ability to maintain selectivity and activity over multiple reaction cycles. The Cu(II)-Alg hydrogel beads were used for synthesizing substituted benzimidazole derivatives in a water-ethanol solvent at room temperature. This method offers significant advantages, including extremely mild reaction conditions, short reaction times (<1 h), high yields (70-94 %), and ease of processing. The most significant results indicate that the Cu(II)-alginate catalyst exhibits a high loading capacity and retains its catalytic efficiency for at least 3 cycles, thereby highlighting its potential for sustainable applications in organic synthesis.

Efficient in-situ synthesis of heterocyclic derivatives from benzyl alcohols using pyrazinium chlorochromate-functionalized carbonitride as a novel catalyst

The synthesis of efficient organic compounds from simple substrates is both noticeable and important. However, it can be challenging to achieve this target using suitable strategies. To address this issue, pyrazinium chlorochromate (PCC) was used to modify carbonitride nanosheets (CNs) and applied as a heterogeneous catalyst in the oxidation of benzyl alcohols. That can be regarded as innovation in ingenious synthesis of the PCC on the CNs. Then, it was identified by varied techniques such as EDS, FT-IR, XRD, STA and FE-SEM. This process resulted in in-situ synthesis of 1,4-dihydropyridine and 3,4-dihydropyrimidin-2-(1H) one derivatives with excellent yield.

Transition-Metal Catalyzed Synthesis of Pyrimidines: Recent Advances, Mechanism, Scope and Future Perspectives

Pyrimidine is a pharmacologically important moiety that exhibits diverse biological activities. This review reflects the growing significance of transition metal-catalyzed reactions for the synthesis of pyrimidines (with no discussion being made on the transition metal-catalyzed functionalization of pyrimidines). The effect of different catalysts on the selectivity/yields of pyrimidines and catalyst recyclability (wherever applicable) are described, together with attempts to illustrate the role of the catalyst through mechanisms. Although several methods have been researched for synthesizing this privileged scaffold, there has been a considerable push to expand transition metal-catalyzed, sustainable, efficient and selective synthetic strategies leading to pyrimidines. The aim of the authors with this update (2017-2023) is to drive the designing of new transition metal-mediated protocols for pyrimidine synthesis.

DFT stimulation and experimental insights of chiral Cu(II)-salen scaffold within the pocket of MWW-zeolite and its catalytic study

A Cu(II)-salen complex encapsulated in MWW-framework as an efficient chiral organocatalyst was developed for the synthesis of 3,4-dihydropyrimidin-2-(1H)-one (DHPMs) derivatives via an asymmetric pathway. In order to confirm its structural properties, single-crystal X-ray diffraction, powder XRD, BET, XPS, FE-SEM, EDX, UV-Vis, and FTIR spectra were used. Using computer-assisted DFT calculations, the Cu(II)-salen complex has been fine-tuned to fit into the pocket of the porous MWW support while keeping its chirality. This organocatalyst was shown to be a potent catalyst for the formation of the desired DHPMs product under short reaction times. Furthermore, this green protocol allows rapid and simple isolation of active MWW-trapped Cu(II)-salen scaffolds and its reusability in at least five consecutive runs without losing much of its activity.

A novel base-metal multifunctional catalyst for the synthesis of 2-amino-3-cyano-4H-chromenes by a multicomponent tandem oxidation process

A novel base-metal multifunctional nanomagnetic catalyst is prepared by the immobilization of tungstate anions onto γ-Fe2O3 supported with imidazolium moieties. The (γ-Fe2O3-Im-Py)2WO4 was fully characterized using FT-IR, XPS, TEM, FESEM, ICP, TGA, VSM and XRD and used as a multifunctional heterogeneous catalyst for the synthesis of 2-amino-3-cyano-4H-chromenes via a multicomponent tandem oxidation process starting from alcohols under solvent-free conditions. During this process, tungstate catalyzes the oxidation of a wide range of alcohols in the presence of TBHP as a clean source. The in-situ formed aldehydes are condensed with malononitrile and β-dicarbonyl compounds/naphthols/4-hydroxycumarin through promotion by pyridine and imidazolium moieties of the catalyst. By this method, a variety of 2-amino-3-cyano-4H-chromenes are generated in good to high yields from alcohols as inexpensive and easily available starting materials. The catalyst is recovered easily by the aid of an external magnetic field and reused in five successive runs with insignificant decreasing activity.

Sulfated zirconium oxide-decorated magnetite KCC-1 as a durable and recyclable adsorbent for the efficient removal of asphaltene from crude oil

Sulfated zirconium oxide (ZrO₂/SO₄ ^2-) as a highly durable acidic reagent was immobilized on magnetite KCC-1 nanoparticles (Fe₃O₄@SiO₂/KCC-1@ZrO₂/SO₄ ^2- NPs), and the resulting hybrid was used as a highly efficient recyclable adsorbent for the adsorption and removal of asphaltene from crude oil. The presence of ZrO₂/SO₄ ^2- groups not only promotes the adsorption capacity, but also helps recycle the adsorbents without any significant efficiency loss arising from its high chemical resistance. The results showed an obvious synergistic effect between the magnetic core (Fe₃O₄ NPs), fibrous silica (KCC-1) and the sulfated zirconium oxide groups with high correlation for asphaltene adsorption. The effective parameters in asphaltene adsorption, including initial asphaltene concentration, catalyst concentration and temperature, were investigated. Maximum adsorption occurred in the presence of 0.7 g L^-1 of the adsorbent, at a concentration of 2000 mg L^-1 of asphaltene. The asphaltene adsorption by NPs follows a quasi-second order adsorption kinetics. Asphaltene adsorption kinetics were studied by Langmuir, Freundlich, and Temkin isotherms. The prominent advantage of the adsorbent is its ability to be recovered after each adsorption by acid treatment, so that no significant reduction in adsorbent adsorption activity was observed, which can be directly attributed to the presence of ZrO₂/SO₄ ^2- groups in the hybrid.

Efficient reduction of nitro compounds and domino preparation of 1-substituted-1H-1,2,3,4-tetrazoles by Pd(ii)-polysalophen coated magnetite NPs as a robust versatile nanocomposite

A new, versatile, and green methodology has been developed for the efficient NaBH4-reduction of nitroarenes as well as the domino/reduction MCR preparation of 1-substituted-1H-1,2,3,4-tetrazoles using Pd(ii)-polysalophen coated magnetite NPs as an efficient heterogeneous magnetically recyclable nanocatalyst. Polysalophen was firstly prepared based on a triazine framework with a high degree of polymerization, then coordinated to Pd ions and, finally, the resulting hybrid was immobilized on magnetite NPs. The catalyst was characterized by various instrumental and analytical methods, including GPC, DLS, N2 adsorption-desorption, TGA, VSM, TEM, HRTEM, EDX, XPS, XRD, and ICP analyses. The catalyst possesses dual-functionality including the reduction of nitroarenes and the construction of tetrazole rings all in one step via a domino protocol. High to excellent yields were obtained for both nitro reduction and the direct preparation of 1-substituted-1H-1,2,3,4-tetrazoles from nitro compounds. Insight into the mechanism was conducted by XPS in situ as well as DLS in situ along with several control experiments. Recyclability of the catalyst was studied for 6 consecutive runs along with metal leaching measurements in each cycle.