Synthesis and properties of novel organic thiolane polymer as cathode material for rechargeable lithium batteries

Organic-soluble chitosan-g-PHMA (PEMA/PBMA)-bodipy fluorescent probes and film by RAFT method for selective detection of Hg2+/Hg+ ions

Chitosan as the plentiful and easily available natural polymer, its solubility in organic solvents is still a challenge. In this article, three different chitosan-based fluorescent co-polymers were prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization. They could not only dissolve in several organic solvents, but also could selectively recognize Hg²⁺/Hg⁺ ions. Firstly, allyl boron-dipyrrolemethene (bodipy) was prepared, and used as one of the monomers in the subsequent RAFT polymerization. Secondly, chitosan-based chain transfer agent (CS-RAFT) was synthesized through classical reactions for dithioester preparation. Finally, three methacrylic ester monomers and bodipy bearing monomers were polymerized and grafted as branched-chains onto chitosan respectively. By RAFT polymerization, three chitosan-based macromolecular fluorescent probes were prepared. These probes could be readily dissolved in DMF, THF, DCM, and acetone. All of them exhibited the 'turn-on' fluorescence with selective and sensitive detection for Hg²⁺/Hg⁺. Among them, chitosan-g-polyhexyl methacrylate-bodipy (CS-g-PHMA-BDP) had the best performance, its fluorescence intensity could be increased to 2.7 folds. In addition, CS-g-PHMA-BDP could be processed into films and coatings. When loading on the filter paper, fluorescent test paper was prepared and it could realize the portable detection of Hg²⁺/Hg⁺ ions. These organic-soluble chitosan-based fluorescent probes could enlarge the applications of chitosan.

Electronic Conductive Inorganic Cathodes Promising High-Energy Organic Batteries

The electrochemical utilization of organic electrode materials (OEMs) is highly dependent on an excess amount of inactive carbon at the expense of low packing density and energy density. In this work, the challenges by substituting inactive carbon with electronic conductive inorganic cathode (ECIC) materials, which are endowed with high electronic conductivity to transport electrons for redox reactions of the whole electrodes, high ion-storage capacity to act as secondary active materials, and strong affinity with OEMs to inhibit their dissolution, are addressed. Combining representative ECICs (TiS₂ and Mo₆ S₈ ) with organic electrode materials (perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) and hexaazatrinaphthalene (HATN)) simultaneously achieves high capacity, low porosity, lean electrolyte, and thus high energy density. High gravimetric and volumetric energy densities of 153 Wh kg^-1 and 200 Wh L^-1 are delivered with superior cycling stability in a 30 mA h-level Li/PTCDA-TiS₂ pouch cell. The proof-of-concept of organic-ECIC electrodes is also successfully demonstrated in monovalent Na, divalent Mg, and trivalent Al batteries, indicating their feasibility and generalizability. With the discovery of more ECIC materials and OEMs, it is anticipated that the proposed organic-ECIC system can result in further improvements at cell level to compete with transition metal-based Li-ion batteries.

Trisulfide-Bond Acenes for Organic Batteries

The molecular design of organic battery electrodes is a big challenge. Here, we synthesize two metal-free organosulfur acenes and shed insight into battery properties using first-principles calculations. A new zone-melting chemical-vapor-transport (ZM-CVT) apparatus was fabricated to provide a simple, solvent-free, and continuous synthetic protocol, and produce single crystals of tetrathiotetracene (TTT) and hexathiapentacene (HTP) at a large scale. Single crystals of HTP showed better Li-ion battery performance and higher cycling stability than those of TTT. A two-step, three-electron lithiation mechanism instead of the commonly depicted two-electron mechanism is proposed for the HTP Li-ion battery. The superior performance of HTP is linked to unique trisulfide bonding scenarios, which are also responsible for the formation of empty channels along the stacking direction. In-depth theoretical analysis suggests that organosulfur acenes are potential prototypes for organic battery materials with tunable properties, and that the tuning of sulfur bonds is critical in designing these new materials.

Polymer-Based Organic Batteries

The storage of electric energy is of ever growing importance for our modern, technology-based society, and novel battery systems are in the focus of research. The substitution of conventional metals as redox-active material by organic materials offers a promising alternative for the next generation of rechargeable batteries since these organic batteries are excelling in charging speed and cycling stability. This review provides a comprehensive overview of these systems and discusses the numerous classes of organic, polymer-based active materials as well as auxiliary components of the battery, like additives or electrolytes. Moreover, a definition of important cell characteristics and an introduction to selected characterization techniques is provided, completed by the discussion of potential socio-economic impacts.

Thianthrene-functionalized polynorbornenes as high-voltage materials for organic cathode-based dual-ion batteries

Thianthrene-functionalized polynorbornenes were investigated as high-voltage organic cathode materials for dual-ion cells. The polymers show reversible oxidation reactions in solution and as a solid in composite electrodes. Constant current investigations displayed a capacity of up to 66 mA h g(-1) at a high potential of 4.1 V vs. Li/Li(+).