Synthetic algal-bacteria consortia for space-efficient microalgal growth in a simple hydrogel system

Evaluation of cultivation conditions in hydrogel systems to enhance Chlorella vulgaris growth

Microalgae have gained significant attention as sustainable alternatives to traditional agriculture and energy resources. The cultivation efficiency of microalgae within hydrogel systems presents a promising avenue for spatially efficient bio-production. However, the optimum cultivation conditions of hydrogel cultivation systems have not been elucidated. This study focused on evaluating the hydrogel-based cultivation of Chlorella vulgaris in symbiosis with Bacillus Strain Salmah Ismail (SI) 139SI. It investigated the impact of hydrogel concentration, pH, light exposure, and system thickness on the growth and chlorophyll production of the algae. Our findings highlighted that, in coculture, a 7% (w/v) hydrogel concentration, pH of 7.4, a 12-h light/dark cycle at a hydrogel concentration of 7% but continuous light exposure under 5% hydrogel concentration, and a system thickness of 10 mm have provided the most favorable environmental conditions for the proliferation and chlorophyll production of C. vulgaris. These conditions significantly enhanced the biomass yields, suggesting that tailored hydrogel environments can substantially improve microalgae productivity.

Bacteria-microalgae interactions from an evolutionary perspective and their biotechnological significance

Interactions between bacteria and microalgae have been studied in natural environments and in industrial consortia. As results of co-evolution for millions of years in nature, they have developed complex symbiotic relationships, including mutualism, commensalism and parasitism, the nature of which is decided by mechanisms of the interaction. There are two main types of molecular interactions between microalgae and bacteria: exchange of nutrients and release of signalling molecules. Nutrient exchange includes transport of organic carbon from microalgae to bacteria and nutrient nitrogen released from nitrogen-fixing bacteria to microalgae, as well as reciprocal supply of micronutrients such as B vitamins and iron. Signalling molecules such as phytohormones secreted by microalgae and quorum sensing molecules secreted by bacteria have been shown to positively affect growth and metabolism of the symbiotic partner. However, there are still a number of potential microalgae-bacteria interactions that have not been well explored, including cyclic peptides, other quorum signalling molecules, and extracellular vesicles involved in exchange of genetic materials. A more thorough understanding of these interactions may not only result in a deeper understanding of the relationships between these symbiotic organisms but also have potential biotechnological applications. Upon new mechanisms of interaction being identified and characterized, novel bioprocesses of synthetic ecology might be developed especially for wastewater treatment and production of biofertilizers and biofuels.

Phototrophic bacteria as potential probiotics for corals

Coral-associated microorganisms provide crucial nutritional, protective, and developmental benefits, yet many functional traits remain unexplored. Phototrophic bacteria may enhance coral nutrition and reduce oxidative stress during bleaching via photosynthesis and antioxidant production. Despite this potential, their role in the holobiont's energy budget and heat stress resilience is understudied. This review explores the functional traits and potential of phototrophic bacteria to enhance coral health and resilience under environmental stress.

Solving Challenges in Microalgae-Based Living Materials

Engineered living materials (ELMs) integrate aspects of material science and biology into a unique platform, leading to materials and devices with features of life. Among those, ELMs containing microalgae have received increased attention due to the many benefits photosynthetic organisms provide. Due to their relatively recent occurrence, photosynthetic ELMs still face many challenges related to reliability, lifetime, scalability, and more, often based on the complicated crosstalk of cellular, material-based, and environmental variables in time. This Viewpoint aims to summarize potential avenues for improving ELMs, beginning with an emphasis on understanding the cell's perspective and the potential stresses imposed on them due to recurring flaws in many current ELMs. Potential solutions and their ease of implementation will be discussed, ranging from choice of organism, adjustments to the ELM design, to various genetic modification tools, so as to achieve ELMs with longer lifetime and improved functionality.

Comprehensive Advancements in Hydrogel, and Its Application in Microalgae Cultivation and Wastewater Treatment

Microalgae are recognized as a sustainable resource to produce biofertilizers, biofuels, and pigments, with the added benefits of environmental sustainability, such as carbon sequestration and pollutant removal. However, traditional cultivation methods face challenges like low biomass productivity and high operational costs. This review focuses on the innovative use of hydrogels as a medium for microalgae cultivation, which addresses these challenges by enhancing nutrient permeability, light distribution, and overall growth efficiency. Hydrogels provide a three-dimensional matrix that not only supports higher biomass yields but also facilitates the removal of pollutants from wastewater, contributing to circular economy goals. The review also explores the environmental benefits, challenges, and prospects of integrating hydrogel technology into microalgae cultivation systems. By highlighting influencing factors through which hydrogels improve microalgal productivity and environmental outcomes, this work aims to provide insights into the potential of hydrogel-based systems for sustainable development.

3D Bioprinting of Microbial-based Living Materials for Advanced Energy and Environmental Applications

Microorganisms, serving as super biological factories, play a crucial role in the production of desired substances and the remediation of environments. The emergence of 3D bioprinting provides a powerful tool for engineering microorganisms and polymers into living materials with delicate structures, paving the way for expanding functionalities and realizing extraordinary performance. Here, the current advancements in microbial-based 3D-printed living materials are comprehensively discussed from material perspectives, covering various 3D bioprinting techniques, types of microorganisms used, and the key parameters and selection criteria for polymer bioinks. Endeavors on the applications of 3D printed living materials in the fields of energy and environment are then emphasized. Finally, the remaining challenges and future trends in this burgeoning field are highlighted. We hope our perspective will inspire some interesting ideas and accelerate the exploration within this field to reach superior solutions for energy and environment challenges.

Light management by algal aggregates in living photosynthetic hydrogels

Rapid progress in algal biotechnology has triggered a growing interest in hydrogel-encapsulated microalgal cultivation, especially for the engineering of functional photosynthetic materials and biomass production. An overlooked characteristic of gel-encapsulated cultures is the emergence of cell aggregates, which are the result of the mechanical confinement of the cells. Such aggregates have a dramatic effect on the light management of gel-encapsulated photobioreactors and hence strongly affect the photosynthetic outcome. To evaluate such an effect, we experimentally studied the optical response of hydrogels containing algal aggregates and developed optical simulations to study the resultant light intensity profiles. The simulations are validated experimentally via transmittance measurements using an integrating sphere and aggregate volume analysis with confocal microscopy. Specifically, the heterogeneous distribution of cell aggregates in a hydrogel matrix can increase light penetration while alleviating photoinhibition more effectively than in a flat biofilm. Finally, we demonstrate that light harvesting efficiency can be further enhanced with the introduction of scattering particles within the hydrogel matrix, leading to a fourfold increase in biomass growth. Our study, therefore, highlights a strategy for the design of spatially efficient photosynthetic living materials that have important implications for the engineering of future algal cultivation systems.

Rational construction of synthetic consortia: Key considerations and model-based methods for guiding the development of a novel biosynthesis platform

The rapid development of synthetic biology has significantly improved the capabilities of mono-culture systems in converting different substrates into various value-added bio-chemicals through metabolic engineering. However, overexpression of biosynthetic pathways in recombinant strains can impose a heavy metabolic burden on the host, resulting in imbalanced energy distribution and negatively affecting both cell growth and biosynthesis capacity. Synthetic consortia, consisting of two or more microbial species or strains with complementary functions, have emerged as a promising and efficient platform to alleviate the metabolic burden and increase product yield. However, research on synthetic consortia is still in its infancy, with numerous challenges regarding the design and construction of stable synthetic consortia. This review provides a comprehensive comparison of the advantages and disadvantages of mono-culture systems and synthetic consortia. Key considerations for engineering synthetic consortia based on recent advances are summarized, and simulation and computational tools for guiding the advancement of synthetic consortia are discussed. Moreover, further development of more efficient and cost-effective synthetic consortia with emerging technologies such as artificial intelligence and machine learning is highlighted.

Enhancing organic matter productivity in microalgal-bacterial biofilm using novel bio-coating

Research on renewable energy from microalgae has led to a growing interest in porous substrate photobioreactors, but their widespread adoption is currently limited to pure microalgal biofilm cultures. The behavior of microalgal-bacterial biofilms immobilized on microporous substrates remains as a research challenge, particularly in uncovering their mutualistic interactions in environment enriched with dissolved organic matter. Therefore, this study established a novel culture platform by introducing microalgal-derived bio-coating that preconditioned hydrophilic polyvinylidene fluoride membranes for the microalgal-bacterial biofilm growth of freshwater microalgae, Chlorella vulgaris ESP 31 and marine microalgae, Cylindrotheca fusiformis with bacteria, Escherichia coli. In the attached co-culture mode, the bio-coating we proposed demonstrated the ability to enhance microalgal growth for both studied species by a range of 2.5 % to 19 % starting from day 10 onwards. Additionally, when compared to co-culture on uncoated membranes, the bio-coating exhibited a significant bacterial growth promotion effect, increasing bacterial growth by at least 2.35 times for the C. vulgaris-E. coli co-culture after an initial adaptation phase. A significant increase of at least 72 % in intracellular biochemical compounds (including chlorophyll, polysaccharides, proteins, and lipids) was observed within just five days, primarily due to the high concentration of pre-coated organic matter, mainly sourced from the internal organic matter (IOM) of C. fusiformis. Higher accumulation of organic compounds in the bio-coating indirectly triggers a competition between microalgae and bacteria which potentially stimulate the production of additional intra-/extra-organic substances as a defensive response. In short, insight gained from this study may represent a paradigm shift in the ways that symbiotic interactions are promoted to increase the yield of specific bio-compounds with the presence of bio-coating.

Bio-coatings in permeated cultivation systems: Unprecedented impacts on microalgal monoculture growth and organic matter yield

Bio-coating, a recent and promising approach in attached microalgal cultivation systems, has garnered attention due to its efficiency in enhancing immobilized algal growth, particularly in submerged cultivation systems. However, when the cells are cultured on thin solid microporous substrates that physically separate them from the nutrient medium, it remains unclear whether the applied bio-coatings still have a significant impact on algal growth or the subsequent rates of algal organic matter (AOM) release. Therefore, this current work investigated the role of bio-coatings on the microalgal monoculture growth of one freshwater species, Chlorella vulgaris ESP 31, and one marine species, Cylindrotheca fusiformis on a hydrophilic substrate, polyvinylidene fluoride membrane in a permeated cultivation system. Wide range of bio-coating sources were adapted, with the result demonstrating that bacteria-derived coating promoted algal growth by as high as 140% when compared with the control group for both species. Interestingly, two distinct adaptation mechanisms were observed between the species, with only C. fusiformis demonstrating a positive correlation between cell growth and AOM productivity, particularly in its extracellularly bound fractions. It is worth noting that despite this specific fraction exhibiting the lowest content among all; it displayed significant relevance in terms of AOM productivity. High extracellular protein-to-polysaccharide ratio (>5.7 fold) quantified on bacterial intracellular exudate-coated membranes indirectly revealed an underlying symbiotic microalgal-bacterial interaction. This is the first study showing how bio-coating influenced AOM yield without any physical interaction between microalgae and bacteria. It further confirms the practical benefits of bio-coating in attached cultivation systems.

Controllable and biocompatible 3D bioprinting technology for microorganisms: Fundamental, environmental applications and challenges

3D bioprinting is a new 3D manufacturing technology, that can be used to accurately distribute and load microorganisms to form microbial active materials with multiple complex functions. Based on the 3D printing of human cells in tissue engineering, 3D bioprinting technology has been developed. Although 3D bioprinting technology is still immature, it shows great potential in the environmental field. Due to the precise programming control and multi-printing pathway, 3D bioprinting technology provides a high-throughput method based on micron-level patterning for a wide range of environmental microbiological engineering applications, which makes it an on-demand, multi-functional manufacturing technology. To date, 3D bioprinting technology has been employed in microbial fuel cells, biofilm material preparation, microbial catalysts and 4D bioprinting with time dimension functions. Nevertheless, current 3D bioprinting technology faces technical challenges in improving the mechanical properties of materials, developing specific bioinks to adapt to different strains, and exploring 4D bioprinting for intelligent applications. Hence, this review systematically analyzes the basic technical principles of 3D bioprinting, bioinks materials and their applications in the environmental field, and proposes the challenges and future prospects of 3D bioprinting in the environmental field. Combined with the current development of microbial enhancement technology in the environmental field, 3D bioprinting will be developed into an enabling platform for multifunctional microorganisms and facilitate greater control of in situ directional reactions.

Photosynthetic Living Fiber Fabrication from Algal-Bacterial Consortia with Controlled Spatial Distribution

Living materials that combine living cells and synthetic matrix materials have become promising research fields in recent years. While multicellular systems present exclusive benefits in developing living materials over single-cell systems, creating artificial multicellular systems can be challenging due to the difficulty in controlling the multicellular assemblies and the complexity of cell-to-cell interactions. Here, we propose a coculture platform capable of isolating and controlling the spatial distribution of algal-bacterial consortia, which can be utilized to construct photosynthetic living fibers. Through coaxial extrusion-based 3D printing, hydrogel fibers containing bacteria or algae can be deposited into designated structures and further processed into materials with precise geometries. In addition, the photosynthetic living fibers demonstrate a significant synergistic catalytic effect resulting from the immobilization of both bacteria and algae, which effectively optimizes sewage treatment for bioremediation purposes. The integration of microbial consortia and 3D printing yields functional living materials with promising applications in biocatalysis, biosensing, and biomedicine. Our approach provides an optimized solution for constructing efficient multicellular systems and opens a new avenue for the development of advanced materials.

Synthetic Light-Driven Consortia for Carbon-Negative Biosynthesis

Synthetic light-driven consortia composed of phototrophs and heterotrophs have attracted increasing attention owing to their potential to be used in sustainable biotechnology. In recent years, synthetic phototrophic consortia have been used to produce bulk chemicals, biofuels, and other valuable bioproducts. In addition, autotrophic-heterotrophic symbiosis systems have potential applications in wastewater treatment, bioremediation, and as a method for phytoplankton bloom control. Here, we discuss progress made on the biosynthesis of phototrophic microbial consortia. In addition, strategies for optimizing the synthetic light-driven consortia are summarized. Moreover, we highlight current challenges and future research directions for the development of robust and controllable synthetic light-driven consortia.

A review on microalgal-bacterial co-culture: The multifaceted role of beneficial bacteria towards enhancement of microalgal metabolite production

Mass microalgal-bacterial co-cultures have come to the fore of applied physiological research, in particularly for the optimization of high-value metabolite from microalgae. These co-cultures rely on the existence of a phycosphere which harbors unique cross-kingdom associations that are a prerequisite for the cooperative interactions. However, detailed mechanisms underpinning the beneficial bacterial effects onto microalgal growth and metabolic production are rather limited at the moment. Hence, the main purpose of this review is to shed light on how bacteria fuels microalgal metabolism or vice versa during mutualistic interactions, building upon the phycosphere which is a hotspot for chemical exchange. Nutrients exchange and signal transduction between two not only increase the algal productivity, but also facilitate in the degradation of bio-products and elevate the host defense ability. Main chemical mediators such as photosynthetic oxygen, N-acyl-homoserine lactone, siderophore and vitamin B12 were identified to elucidate beneficial cascading effects from the bacteria towards microalgal metabolites. In terms of applications, the enhancement of soluble microalgal metabolites is often associated with bacteria-mediated cell autolysis while bacterial bio-flocculants can aid in microalgal biomass harvesting. In addition, this review goes in depth into the discussion on enzyme-based communication via metabolic engineering such as gene modification, cellular metabolic pathway fine-tuning, over expression of target enzymes, and diversion of flux toward key metabolites. Furthermore, possible challenges and recommendations aimed at stimulating microalgal metabolite production are outlined. As more evidence emerges regarding the multifaceted role of beneficial bacteria, it will be crucial to incorporate these findings into the development of algal biotechnology.

Engineered photoresponsive biohybrids for tumor therapy

Engineered biohybrids have recently emerged as innovative biomimetic platforms for cancer therapeutic applications. Particularly, engineered photoresponsive biohybrids hold tremendous potential against tumors due to their intriguing biomimetic properties, photoresponsive ability, and enhanced biotherapeutic functions. In this review, the design principles of engineered photoresponsive biohybrids and their latest progresses for tumor therapy are summarized. Representative engineered photoresponsive biohybrids are highlighted including biomolecules-associated, cell membrane-based, eukaryotic cell-based, bacteria-based, and algae-based photoresponsive biohybrids. Representative tumor therapeutic modalities of the engineered photoresponsive biohybrids are presented, including photothermal therapy, photodynamic therapy, synergistic therapy, and tumor therapy combined with tissue regeneration. Moreover, the challenges and future perspectives of these photoresponsive biohybrids for clinical practice are discussed.

Microalgal extract as bio-coating to enhance biofilm growth of marine microalgae on microporous membranes

Microalgal biofilm is a popular platform for algal production, nutrient removal and carbon capture; however, it suffers from significant biofilm exfoliation under shear force exposure. Hence, a biologically-safe coating made up of algal extracellular polymeric substances (EPS) was utilized to secure the biofilm cell retention and cell loading on commercial microporous membrane (polyvinylidene fluoride), making the surfaces more hydrophobic (contact angle increase up to 12°). Results demonstrated that initial cell adhesion of three marine microalgae (Amphora coffeaeformis, Cylindrotheca fusiformis and Navicula incerta) was enhanced by at least 1.3 times higher than that of pristine control within only seven days with minimized biofilm exfoliation issue due to uniform distribution of sticky transparent exopolymer particles. Bounded extracellular polysaccharide gathered was approximately 23% higher on EPS-coated membranes to improve the biofilm's hydraulic resistance, whereas bounded extracellular protein would only be substantially elevated after the attached cells re-accommodate themselves onto the EPS pre-coating of themselves. In accounting the rises of hydrophobic protein content, biofilm was believed to be more stabilized, presumably via hydrophobic interactions. EPS biocoating would generate a groundswell of interest for bioprocess intensifications though there are lots of inherent technical and molecular challenges to be further investigated in future.

Algae in wastewater treatment, mechanism, and application of biomass for production of value-added product

The pollutants can enter water bodies at various point and non-point sources, and wastewater discharge remains a major pathway. Wastewater treatment effectively reduces contaminants, it is expensive and requires an eco-friendly and sustainable alternative approach to reduce treatment costs. Algae have recently emerged as a potentially cost-effective method to remediate toxic pollutants through the mechanism of biosorption, bioaccumulation, and intracellular degradation. Hence, before discharging the wastewater into the natural environment better solutions for environmental resource recovery and sustainable developments can be applied. More importantly, algae are a potential feedstock material for various industrial applications such as biofuel production. Currently, researchers are developing algae as a source for pharmaceuticals, biofuels, food additives, and bio-fertilizers. This review mainly focused on the potential of algae and their specific mechanisms involved in wastewater treatment and energy recovery systems leading to important industrial precursors. The review is highly beneficial for scientists, wastewater treatment plant operators, freshwater managers, and industrial communities to support the sustainable development of natural resources.

Applications of synthetic light-driven microbial consortia for biochemicals production

Synthetic microbial consortia provide a versatile and efficient platform for biochemicals production through the labor division. Especially, microbial communities composed of phototrophs and heterotrophs offer a promising alternative, as they can directly convert carbon dioxide (CO₂) into chemicals. Within this system, photoautotrophic microbes can convert CO₂ into organic carbon for microbial growth and metabolites synthesis by the heterotrophic partners. In return, heterotrophs can provide additional CO₂ to support the growth of photoautotrophic microbes. However, the unmatched growing conditions, low stability and production efficiency of synthetic microbial consortia hinder their further applications. Thus, design and construction of mutualistic and stable synthetic light-driven microbial consortia are urgently needed. In this review, the progress of synthetic light-driven microbial consortia for chemicals production was comprehensively summarized. In addition, space-efficient synthetic light-driven microbial consortia in hydrogel system were reviewed. Perspectives on orderly distribution of light-driven microbial consortia associated with 3D printing technology in biomanufacturing were also addressed.