Enhanced model protein adsorption of nanoparticulate hydroxyapatite thin films on silk sericin and fibroin surfaces

Enhanced bone regeneration usingAntheraea mylittasilk fibroin and chitosan based scaffold:in-vivoandin-vitrostudy

In this study, highly interconnected porous scaffolds fromAntheraea mylittasilk fibroin (SF) and chitosan (CH) were fabricated using the freeze-drying method. The weight ratios of SF to CH were varied from 90:10 (SF90/CH10) to 50:50 (SF50/CH50) to prepare the scaffolds from the aqueous suspension of the protein-polysaccharide mix. From the initial optimization of scaffold composition with respect to their microstructure, porosity, and mechanical properties, the SF80/CH20scaffold exhibited the most suitable properties for bone tissue engineering application as compared to others compositions. Hencein-vitrohemocompatibility, protein adsorption, and MG-63 cell culture studies were carried out for SF80/CH20scaffold. The fabricated SF80/CH20scaffold showed a more controlled swelling percentage of 42.8%, with high BSA protein adsorption of 0.39 mg of BSA per gm of the scaffold at 24 h incubation period. Furthermore,in-vitroMG-63 cell culture study onto the fabricated SF80/CH20scaffold elicited excellent MG-63 cell attachment with better biocompatibility and cell viability with increased F-action production from day 3 to day 7 of the cell culture period.In vivobone defect healing in a rabbit tibia model revealed excellent bone healing capacity in SF80/CH20scaffold implanted specimens compared to control ones, as evident from histology and fluorochrome labeling analysis.

α-Tricalcium phosphate cement reinforced with silk fibroin: A high strength biomimetic bone cement with chloride-substituted hydroxyapatite

In the past decades, bone defects have become an increasing factor in the development of disability in patients, impacting their quality of life. Large bone defects have minor chances to self-repair, requiring surgical intervention. Therefore, α-TCP-based cements are rigorously studied for the development of bone filling and replacement applications due to the possibility of application in minimally invasive procedures. However, α-TCP-based cements do not present adequate mechanical properties for most orthopedic applications. The aim of this study is to develop a biomimetic α-TCP cement reinforced with 0.250-1.000 wt% of silk fibroin using non-dialyzed SF solutions. Samples with SF additions higher than 0.250 wt% presented complete transformation of the α-TCP to a biphasic CDHA/HAp-Cl material, which could enhance the osteoconductivity of the material. Samples reinforced with concentrations of 0.500 wt% SF showed an increase of 450% of the fracture toughness and 182% of the compressive strength of the control sample, even with 31.09% porosity, which demonstrates good coupling between the SF and the CPs. All samples reinforced with SF showed a microstructure with smaller needle-like crystals when compared to the control sample, which possibly contributed to the material's reinforcement. Moreover, the composition of reinforced samples did not affect the cytotoxicity of the CPCs and enhanced the cell viability presented by the CPC without SF addition. Hence, biomimetic CPCs with mechanical reinforcement through the addition of SF were successfully obtained through the developed methodology, with the potential to be further evaluated as a suitable material for bone regeneration.