Sustainable alginate-carboxymethyl cellulose superabsorbents prepared by a novel quasi-cryogelation method

Foam-based antibacterial hydrogel composed of carboxymethyl cellulose/polyvinyl alcohol/cerium oxide nanoparticles for potential wound dressing

Foam-based wound dressing materials produced by dispersing gas phases in a polymeric material are soft, adapt to the body shape, and allow the absorption of wound exudate due to their porous structure. Most of these formulations are based on synthetic substances such as polyurethane. However, biopolymers have entered the field as a new player thanks to their biocompatible and sustainable nature. Incorporating biopolymers in formulations is gaining interest in scientific literature, and we extend this approach by adding antibacterial cerium oxide nanoparticles to biopolymer formulation. We introduce a novel biopolymer composite of carboxymethyl cellulose (CMC), polyvinyl alcohol (PVA), and cerium oxide nanoparticles (CeO2 NPs), namely PVA-CMC@CeO2. This mixture was first foamed and then cross-linked with sodium tetraborate solution, followed by a freeze-thaw process. After the novel material's spectroscopic, structural, and morphological characterization, we investigated its swelling, drug-delivery, antibacterial, and biodegradability properties PVA-CMC@CeO2 dressing effectively inhibits Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) growth and delivers the antibiotic drug silver sulfadiazine for up to 6 h. The antibacterial properties, good swelling, and drug release profile of the blend material show promising potential in wound care applications.

Development of hybrid polyvinylpyrrolidone/carboxymethyl cellulose/collagen incorporated oregano scaffolds via direct ink write printing for potential wound healing applications

Additive manufacturing can develop regenerative scaffolds for wound healing. 3D printing offers meticulous porosity, mechanical integrity, cell adhesion and cost-effectiveness. Herein, we prepared ink composed of carboxymethyl cellulose (CMC), polyvinylpyrrolidone (PVP), collagen, and oregano extract for the fabrication of tissue constructs. The blend was optimized to form a homogeneous ink and rheological characterization demonstrated shear thinning behavior. The scaffolds were printed using Direct Ink Write (DIW) at a flow speed of 4 mm3/s and a layer height of 0.18 mm. The fabricated scaffolds demonstrated an ultimate tensile strength (UTS) and toughness of 730 KPa and 2.72 MJ/m3, respectively. Scanning Electron Microscopy (SEM) revealed an average pore size of 300 ± 30 μm. Fourier transform infrared spectroscopy (FTIR) analysis confirmed that all materials were present. The contact angle of the composite scaffold was 68° ± 1°. Moreover, the scaffolds presented 82 % mass loss (degradation) in phosphate buffer saline (PBS) over 14 days. The composite scaffold exhibited inhibition zones of 9 mm and 12 mm against Staphylococcus aureus and Escherichia coli, respectively. The PVP/CMC/collagen/oregano 3D printed scaffolds exhibited excellent biocompatibility with the mesenchymal stem cells and humman dermal fibroblast cells, confirmed by water-soluble tetrazolium - 8 (WST-8) assay (test conducted for 7 days). The enhanced angiogenic potential of said scaffold was assesed by release of vascular endothelial growth factor followed by further validation through in-vivo CAM assay. Thus, confirming suitability for the potential wound healing application.

Novel 3D printed polysaccharide-based materials with prebiotic activity for potential treatment of diaper rash

Diaper rash, mainly occurring as erythema and itching in the diaper area, causes considerable distress to infants and toddlers. Increasing evidence suggests that an unequal distribution of microorganisms on the skin contributes to the development of diaper dermatitis. Probiotic bacteria, like Staphylococcus epidermidis, are crucial for maintaining a healthy balance in the skin's microbiome, among others, through their fermentative metabolites, such as short-chain fatty acids. Using a defined prebiotic as a carbon source (e.g., as part of the diaper formulation) can selectively trigger the fermentation of probiotic bacteria. A proper material choice can reduce diaper rash incidence by diminishing the skin exposure to wetness and faeces. Using 3D printing, we fabricated carbon-rich materials for the top sheet layer of baby diapers that enhance the probiotic activity of S. epidermidis. The developed materials' printability, chemical composition, swelling ability, and degradation rate were analysed. In addition, microbiological tests evaluated their potential as a source of in situ short-chain fatty acid production. Finally, biocompatibility testing with skin cells evaluated their safety for potential use as part of diapers. The results demonstrate a cost-effective approach for producing novel materials that can tailor the ecological balance of the skin microflora and help treat diaper rash.

Advancements in Cellulose-Based Superabsorbent Hydrogels: Sustainable Solutions across Industries

The development of superabsorbent hydrogels is experiencing a transformative era across industries. While traditional synthetic hydrogels have found broad utility, their non-biodegradable nature has raised environmental concerns, driving the search for eco-friendlier alternatives. Cellulose-based superabsorbents, derived from sustainable sources, are gaining prominence. Innovations include biodegradable polymer hydrogels, natural cellulose-chitosan variants, and cassava starch-based alternatives. These materials are reshaping agriculture by enhancing soil fertility and water retention, serving as potent hemostatic agents in medicine, contributing to pollution control, and providing eco-friendly construction materials. Cellulose-based hydrogels also offer promise in drug delivery and hygiene products. Advanced characterization techniques aid in optimizing their properties, while the shift towards circular economy practices further highlights sustainability. This manuscript provides a comprehensive overview of these advancements, highlighting their diverse applications and environmental benefits.

Prophylactic application of vaginal lactic acid bacteria against urogenital pathogens and its prospective use in sanitary suppositories

Beneficial and pathogenic microbes coexist in the vaginal canal, where a diminishing population of lactic acid bacteria may cause recurring urogenital infections. Probiotic bacteria Lactobacillus crispatus, Lactobacillus gasseri, Lactobacillus vaginalis, and pathogenic microbes Enterococcus faecalis, Enterobacter cloacae, Shigella sp., Staphylococcus epidermidis, and Escherichia fergusonii were isolated from vaginal swabs. Lactobacillus sp. and their probiotic culture free supernatant (PCFS) inhibited the growth of the above-mentioned urogenital pathogens. L. crispatus produced both lactic acid and hydrogen peroxide, exhibiting the best antimicrobial potential against the studied pathogens. Lyophilized L. crispatus had a shelf life of 12 months and the lyophilized PCFS also retained its antibacterial property with a minimum inhibition concentration of 1 μg/μL. Carboxy-methyl cellulose-alginate, a green alternative to super-absorbent polymers, was encapsulated with L. crispatus cells. The probiotic in its encapsulated state retained its viability for 21 days, and the bead showed 30% solvent absorptive capacity. PCFS-laced non-woven fabric displayed antibacterial property with no change in its physicochemical properties. These probiotic and postbiotic formulations have excellent prophylactic potential for urogenital infections. Such formulations can be exploited as additives in sanitary suppositories to enhance vaginal health.

Chitosan Superabsorbent Biopolymers in Sanitary and Hygiene Applications

The consumption of diapers and sanitary products has constantly been rising. Several problems are associated with using chemical-based sanitary products, which are difficult to degrade easily and cause nappy rash and bacterial infections in babies. Therefore, there is an increasing shift towards natural-based sanitary products because of their biodegradability, non-toxicity, and biocompatibility. Several studies are being carried out in which researchers have incorporated natural polymers, such as cellulose, starch, alginate, and xantham gum for producing superabsorbent materials. Chitosan (CS) is one such natural polymer that exhibits anti-microbial activity because of the functional groups present in its structure. Moreover, it is also easily available, biodegradable, and non-toxic. This review mainly focuses on CS’s properties and several approaches to synthesizing natural polymer-based superabsorbent products, such as sanitary pads and diapers. It also briefly discusses the diversified applications of CS as a biopolymer in the cosmetic, medical, food, and textile industries. In addition, this study implies using CS as a superabsorbent biopolymer in the manufacturing and producing sanitary products for women and children. Due to the excellent water retention capacity, swelling ability, and anti-microbial activity exhibited by CS can be considered a potential candidate for producing superabsorbent biopolymers.

A Comprehensive Review of Cross-Linked Gels as Vehicles for Drug Delivery to Treat Central Nervous System Disorders

Gels are attractive candidates for drug delivery because they are easily producible while offering sustained and/or controlled drug release through various mechanisms by releasing the therapeutic agent at the site of action or absorption. Gels can be classified based on various characteristics including the nature of solvents used during preparation and the method of cross-linking. The development of novel gel systems for local or systemic drug delivery in a sustained, controlled, and targetable manner has been at the epitome of recent advances in drug delivery systems. Cross-linked gels can be modified by altering their polymer composition and content for pharmaceutical and biomedical applications. These modifications have resulted in the development of stimuli-responsive and functionalized dosage forms that offer many advantages for effective dosing of drugs for Central Nervous System (CNS) conditions. In this review, the literature concerning recent advances in cross-linked gels for drug delivery to the CNS are explored. Injectable and non-injectable formulations intended for the treatment of diseases of the CNS together with the impact of recent advances in cross-linked gels on studies involving CNS drug delivery are discussed.