Biosorption of U(VI) by active and inactive Aspergillus niger: equilibrium, kinetic, thermodynamic and mechanistic analyses

Adsorption capacity and mechanism of uranium by Fusarium verticillioides HX-3 isolated from a uranium mining site

Microorganisms that survive in extreme environments may possess special survival abilities. In this study, the adsorption capacity and mechanism of F. verticillioides HX-3, a fungus isolated from uranium mine wastewater, for uranium were investigated. Single factor batch experiments such as adsorption time, biomass dosage, pH, temperature, initial uranium concentration and coexisting ion were used to study the uranium adsorption capacity of biomass. The adsorption mechanism was further explored using kinetic, isothermal, thermodynamic models, and microscopic characterization techniques. The results demonstrated that under optimal experimental conditions, the biomass reached an adsorption capacity of 10.47 mg/g at a uranium concentration of 15 mg/L, with an adsorption efficiencies of 93 %. The study also revealed that the biomass adsorption process involves inhomogeneous multilayer chemisorption and exhibits spontaneous endothermic behavior. SEM-EDS analysis revealed that U(IV) primarily adsorbs onto the biomass surface. FTIR analysis showed that the functions that played the main role in the adsorption process were amino, hydroxyl, carbonyl, and acylamino groups. In summary, F. verticillioides HX-3 holds great potential for treating uranium-containing wastewater and can serve as an environmentally friendly biosorbent.

Advancements in microbial-mediated radioactive waste bioremediation: A review

The global production of radioactive wastes is expected to increase in the coming years as more countries have resorted to adopting nuclear power to decrease their reliance on fossil-fuel-generated energy. Discoveries of remediation methods that can remove radionuclides from radioactive wastes, including those discharged to the environment, are therefore vital to reduce risks-upon-exposure radionuclides posed to humans and wildlife. Among various remediation approaches available, microbe-mediated radionuclide remediation have limited reviews regarding their advances. This review provides an overview of the sources and existing classification of radioactive wastes, followed by a brief introduction to existing radionuclide remediation (physical, chemical, and electrochemical) approaches. Microbe-mediated radionuclide remediation (bacterial, myco-, and phycoremediation) is then extensively discussed. Bacterial remediation involves biological processes like bioreduction, biosorption, and bioprecipitation. Bioreduction involves the reduction of water-soluble, mobile radionuclides to water-insoluble, immobile lower oxidation states by ferric iron-reducing, sulfate-reducing, and certain extremophilic bacteria, and in situ remediation has become possible by adding electron donors to contaminated waters to enrich indigenous iron- and sulfate-reducing bacteria populations. In biosorption, radionuclides are associated with functional groups on the microbial cell surface, followed by getting reduced to immobilized forms or precipitated intracellularly or extracellularly. Myco- and phycoremediation often involve processes like biosorption and bioaccumulation, where the former is influenced by pH and cell concentration. A Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis on microbial remediation is also performed. It is suggested that two research directions: genetic engineering of radiation-resistant microorganisms and co-application of microbe-mediated remediation with other remediation methods could potentially result in the discovery of in situ or ex situ microbe-involving radioactive waste remediation applications with high practicability. Finally, a comparison between the strengths and weaknesses of each approach is provided.

Investigation of Physicochemical Characteristics of Aspergillus niger Biomass and Examination of Its Ability to Separate Butyl Acetate Isomers

Aspergillus niger is a species of fungus that is widely found in natural ecosystems and has an important role in various industrial fields and is readily available. To study the adhesion of microbial cells to solid substrates and to improve their properties, physicochemical characterization of microorganisms is extremely important. For this purpose, in this study, the surface properties of A. niger biomass were determined at low cost and with high accuracy by inverse gas chromatography (IGC), a physicochemical characterization technique. IGC experiments were conducted between 303.2 and 328.2 K at infinite dilution. Among these temperatures, various organic solvent vapors were passed over the A. niger biomass considered as stationary phase and their retention behavior was studied. Using the raw data, net retention volumes were calculated and retention diagrams were drawn. From the linear retention diagrams, the dispersive surface energy was calculated according to Dorris-Gray (48.73-46.09 mJ/m2), Donnet-Park (47.12-44.50 mJ/m2), Schultz (46.88-42.45 mJ/m2), and Hamieh (76.42-64.06 mJ/m2) methods. With the IGC method, the acidity-basicity parameters of A. niger biomass were determined and it was found that the surface was basic (K D / K A = 4.871 ). In the second part of this study, the butyl acetate isomer series, which are difficult to be separated by conventional methods, were effectively separated by the IGC method using A. niger stationary phase.

Elimination of uranium pollution from coastal nuclear power plant by marine microorganisms: Capability and mechanism

Uranium is one of the sensitive radionuclides in the wastewater of nuclear powers. Due to the fact that nuclear powers are mainly located in coastal areas, the elimination of uranium (U(VI)) pollution from coastal nuclear power is ultimately rely on marine microorganisms. The fixing of U(VI) on V. alginolyticus surface or converting it into sediments is an effective elimination strategy for U(VI) pollution. In this work, typical marine microorganism V. alginolyticus was used to evaluate the elimination of U(VI) pollution by marine microorganisms. Effects of solution conditions (such as pH, temperature, and bacterium concentrations) on the physicochemical properties and elimination capabilities of V. alginolyticus were studied in detail. FT-IR, XPS and XRD results reveal that COOH, NH2, OH and PO4 on V. alginolyticus were main functional groups for U(VI) elimination and formed (UO2)3(PO4)2·H2O. The elimination of U(VI) by V. alginolyticus includes two stages of adsorption and biomineralization. The theoretical maximum adsorption capacity (Cs,max) of V. alginolyticus for U(VI) can reach up to 133 mg/g at pH 5 and 298 K, and the process reached equilibrium in 3 h. Results show that V. alginolyticus play important role in the elimination of U(VI) pollution in seawater.

Plant mediated magnetic nano composite as promising scavenger's radionuclides for the efficient remediation in aqueous medium

The present investigation demonstrates the environment friendly plant mediated green synthesis of magnetic bio composite nanoparticles by the chemical co-precipitation of magnetite phase from aqueous medium. Water contaminated with uranium is one of the most serious environmental issues. This study aims to overcome this issue by effectively adsorbing uranium from water at a pH range of 7. Several studies have recently been published throughout the world that demonstrates uranium adsorption from water, although they have all been conducted in acidic media with pH less than 6. This work addressed that issue, and maximal adsorption was achieved at pH 7 using a synthetic magnetic bio composites sorbent derived from tree bark (Amla). The magnetic bio composites were characterized by FTIR, XRD, FE-SEM, and EDX. The computations of the XRD data indicated that magnetic bio composites have nano composite with an average diameter of around 12.1 nm. This has an adsorption capacity of 121.95 mg g^-1. The correlation regression (r²) coefficients obtained for the various isotherm models indicate that the sorption process conformed to the Langmuir and Temkin models. Thermodynamic studies revealed that the sorption process onto plant mediated magnetic bio material is endothermic and spontaneous, which is significant for reuse and recovery of adsorbed material. A desorption test was also performed to regenerate the material by removing the adsorbed uranium (VI) by HCL with an 84.3% success rate.

Removal of uranium(VI) from aqueous solution by Camellia oleifera shell-based activated carbon: adsorption equilibrium, kinetics, and thermodynamics

Camellia oleifera shell-based activated carbon (COSAC) was prepared by H₃PO₄ activation method and further used to remove U(VI) from the aqueous solution in a batch system. This research examined the influence of various factors affecting U(VI) removal, including contact time, pH, initial U(VI) concentration, and temperature. The results showed that the U(VI) adsorption capacity and removal efficiency reached 71.28 mg/g and 89.1% at the initial U(VI) concentration of 160 mg/L, temperature of 298 K, pH 5.5, contact time of 60 min, and COSAC dosage of 2.0 g/L. The pseudo-first-order, pseudo-second-order, and intraparticle diffusion equations were used to identify the optimum model that can describe the U(VI) adsorption kinetics. The pseudo-second-order kinetics model performed better in characterizing the adsorption system compared with the pseudo-first-order and intraparticle diffusion models. Isotherm data were also discussed with regard to the appropriacy of Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich models. The Langmuir model described the U(VI) adsorption process the best with a maximum adsorption capacity of 78.93 mg/g. Thermodynamic analysis (ΔG⁰ < 0, ΔH⁰ > 0, and ΔS⁰ > 0) indicated that the U(VI) adsorption process is endothermic and spontaneous. All the results imply that COSAC has a promising application in the removal or recovery of U(VI) from aqueous solutions.