An overview of molecular extractants in room temperature ionic liquids and task specific ionic liquids for the partitioning of actinides/lanthanides

Effect of the stability of 1,3-bis(diphenylphosphoryl)-2-oxapropane complexes on the separation of lanthanide ions and their detection

Phosphoryl podands of neutral type with a flexible ethylene glycol chain and diphenylphosphorylmethyl end groups are known for their complexation properties towards various cations. In this work, the complexation process between 1,3-bis(diphenylphosphoryl)-2-oxapropane (L) and lanthanide ions was studied. Namely, the stability constants of lanthanide complexes with L in acetonitrile were estimated by the method of spectrophotometric titration. It was found that the stability constants of Ln3+ complexes with L increase in the lanthanide series, which is consistent with the extraction and ion-selective properties of L. The extraction ability of L and this ligand in the presence of ionic liquids (ILs) such as methyltrioctylammonium nitrate (MTOAN) and bis[(trifluoromethyl)sulfonyl]imide 1-butyl-3-methylimidazolium (C4mimTf2N) was studied. It was found that in the presence of ILs, L extracts the elements of the yttrium subgroup of lanthanides much better than those of the cerium subgroup: SFLu/Ce(L-MTOAN) = 2.29; SFLu/Ce(L-C4mimTf2N) = 110.38. The use of the L-C4mimTf2N mixture in the processes of lanthanide separation into subgroups is much more efficient than the use of L without the addition of ILs or the use of the L-MTOAN mixture. The ion-selective properties of L towards Ln3+ ions were studied. Podand L exhibits potentiometric selectivity to Lu3+ ions.

Oxidative Dissolution of Lanthanide Metals Ce and Ho in Molten GaCl3

Gallium trichloride (GaCl3) was used as a solvent for the oxidative dissolution of the lanthanide (Ln) metals cerium (Ce) and holmium (Ho). Reactions were performed at temperatures above 100 °C in sealed vessels to maintain the liquid phase for GaCl3 during the oxidizing reactions. The best results were obtained from reactions using 8 equiv of GaCl3 to metal where the inorganic complexes [Ga][Ln(GaCl4)4] [Ln = Ce (1), Ho (2)] could be isolated. Recrystallization of 1 and 2 employing fluorobenzene (C6H5F) produced [Ga(η6-C6H5F)2][Ln(GaCl4)4] [Ln = Ce (3), Ho (4)] where reversible η6 coordination of C6H5F to [Ga]+ was observed. All complexes were characterized through elemental analysis (F and Cl), IR and UV-vis-near-IR spectroscopies, and both solution and solid-state NMR techniques.

Techniques for recovery and recycling of ionic liquids: A review

Due to beneficial properties like non-flammability, thermal stability, low melting point and low vapor pressure, ionic liquids (ILs) have gained great interest from engineers and researchers in the past decades to replace conventional solvents. The superior characteristics of ILs make them promising for applications in fields as wide-ranging as pharmaceuticals, foods, nanoparticles synthesis, catalysis, electrochemistry and so on. To alleviate the high cost and environmental impact of ILs, various technologies have been reported to recover and purify the used ILs, as well as recycling the ILs. The aim of this article is to overview the state-of-the-art research on the recovery and recycling technologies for ILs including membrane technology, distillation, extraction, aqueous two-phase system (ATPS) and adsorption. In addition, challenges and future perspectives on ILs recovery are discussed. This review is expected to provide valuable insights for developing effective and environmentally friendly recovery methods for ILs.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Application of Ionic Liquids for the Recycling and Recovery of Technologically Critical and Valuable Metals

Population growth has led to an increased demand for raw minerals and energy resources; however, their supply cannot easily be provided in the same proportions. Modern technologies contain materials that are becoming more finely intermixed because of the broadening palette of elements used, and this outcome creates certain limitations for recycling. The recovery and separation of individual elements, critical materials and valuable metals from complex systems requires complex energy-consuming solutions with many hazardous chemicals used. Significant pressure is brought to bear on the improvement of separation and recycling approaches by the need to balance sustainability, efficiency, and environmental impacts. Due to the increase in environmental consciousness in chemical research and industry, the challenge for a sustainable environment calls for clean procedures that avoid the use of harmful organic solvents. Ionic liquids, also known as molten salts and future solvents, are endowed with unique features that have already had a promising impact on cutting-edge science and technologies. This review aims to address the current challenges associated with the energy-efficient design, recovery, recycling, and separation of valuable metals employing ionic liquids.

Ionic Liquids [M3+ ][A- ]3 with Three-Valent Cations and Their Possible Use to Easily Separate Rare Earth Metals

We introduce a simple way to liquify rare earth metals (REM) by incorporating the corresponding cations, in particular Eu³⁺, La³⁺, and Y³⁺, into polyvalent ionic liquids (ILs). In contrast to conventional methods, this is achieved not by transforming them into anionic complexes, but by keeping them as bare cations and combining them with convenient, cheap and commercially available anions (A) in the form [REM³⁺][A⁻]₃. To do so, we follow the COncept of Melting Point Lowering due to EThoxylation (COMPLET) with alkyl polyethylene oxide carboxylates as anions. We provide basic properties, such as glass transition temperatures, viscosities, electrical conductivities, as well as water‐octanol partition constants P and show that these ILs have remarkably different properties, despite the similarity of their cations. In addition, we show that the ionic liquids possess interesting luminescent properties as non‐conventional fluorophores.

Recovery of Rare Earth Elements (REEs) Using Ionic Solvents

Rare earth elements (REEs) are becoming more and more significant as they play crucial roles in many advanced technologies. Therefore, the development of optimized processes for their recovery, whether from primary resources or from secondary sources, has become necessary, including recovery from mine tailings, recycling of end-of-life products and urban and industrial waste. Ionic solvents, including ionic liquids (ILs) and deep-eutectic solvents (DESs), have attracted much attention since they represent an alternative to conventional processes for metal recovery. These systems are used as reactive agents in leaching and extraction processes. The most significant studies reported in the last decade regarding the recovery of REEs are presented in this review.

Origins of Clustering of Metalate-Extractant Complexes in Liquid-Liquid Extraction

Effective and energy-efficient separation of precious and rare metals is very important for a variety of advanced technologies. Liquid-liquid extraction (LLE) is a relatively less energy intensive separation technique, widely used in separation of lanthanides, actinides, and platinum group metals (PGMs). In LLE, the distribution of an ion between an aqueous phase and an organic phase is determined by enthalpic (coordination interactions) and entropic (fluid reorganization) contributions. The molecular scale details of these contributions are not well understood. Preferential extraction of an ion from the aqueous phase is usually correlated with the resulting fluid organization in the organic phase, as the longer-range organization increases with metal loading. However, it is difficult to determine the extent to which organic phase fluid organization causes, or is caused by, metal loading. In this study, we demonstrate that two systems with the same metal loading may impart very different organic phase organizations and investigate the underlying molecular scale mechanism. Small-angle X-ray scattering shows that the structure of a quaternary ammonium extractant solution in toluene is affected differently by the extraction of two metalates (octahedral PtCl₆^2- and square-planar PdCl₄^2-), although both are completely transferred into the organic phase. The aggregates formed by the metalate-extractant complexes (approximated as reverse micelles) exhibit a more long-range order (clustering) with PtCl₆^2- compared to that with PdCl₄^2-. Vibrational sum frequency generation spectroscopy and complementary atomistic molecular dynamics simulations on model Langmuir monolayers indicate that the two metalates affect the interfacial hydration structures differently. Furthermore, the interfacial hydration is correlated with water extraction into the organic phase. These results support a strong relationship between the organic phase organizational structure and the different local hydration present within the aggregates of metalate-extractant complexes, which is independent of metalate concentration.

Substituent Effect on the Selective Separation and Complexation of Trivalent Americium and Lanthanides by N,O-Hybrid 2,9-Diamide-1,10-phenanthroline Ligands in Ionic Liquid

The extraction and complexation of trivalent americium (Am) and lanthanides (Ln) by four 2,9-diamide-1,10-phenanthroline (DAPhen) ligands with different alkyl substituent groups on the diamide moiety in an ionic liquid (IL), C₄mimNTf₂, were studied through a combination of batch extraction, spectroscopic, and calorimetric approaches. All four DAPhen ligands can achieve selective separation of Am(III) from Eu(III), but the detailed extractability and the extraction kinetics are affected significantly by the length of the alkyl substituent groups. UV-vis absorption spectrophotometric titrations indicate that Ln(III) coordinates with all four ligands in a 1:2 mode in the ionic liquid and the binding strength decreases with the increase of the alkyl chain length. The complexation of the DAPhen ligands with Ln(III) in the ionic liquid is driven by highly positive entropies and opposed by endothermic enthalpies. A luminescence spectroscopy study suggests that each DAPhen ligand coordinates in a tetradentate form with Eu(III). This work further unravels the unique extraction and coordination behavior in an ionic liquid system and offers additional guidelines to design more efficient DAPhen ligands for Ln(III)/An(III) separation.