A review of syntheses of 1,5-disubstituted tetrazole derivatives

An insight into Synthetic, Structural and Medicinal perspective of imidazole analogs: A review

Imidazole is a versatile heterocyclic moiety that has been found to be widely present in many natural and synthetic molecules. It is a ubiquitous moiety that has been widely explored by the scientific community owing to its broad spectrum of biological activities. To pave the way for future research, a comprehensive study on the imidazole moiety was carried out. This review paper will assist researchers and academics in developing more therapeutically active imidazole-based compounds. Herein, we provide a thorough overview of the current research status of imidazole-based compounds with a wide variety of biological activities, including antiviral, anti-cancer, anti-microbial, analgesic and anti-inflammatory, antidiabetic, antiprotozoal, antipsychotic, anti-aging, antioxidant, and anthelmintic. Through this review article, our focus is to contribute towards the recent advancements in the synthetic methodologies and SAR study of imidazoles that contribute as a useful class of heterocyclic compounds involved in the development of therapeutically active molecules. We sincerely hope that this review will serve as a pertinent guide for imminent research in the development of imidazoles and their derivatives.

Magnetic carbon nanotube-catalyzed multicomponent synthesis of 5-substituted-1H-tetrazoles

This study presents a pioneering approach with the introduction of a novel magnetic carbon nanotube composite, AlFe2O4-MWCNT-TEA-Ni(ii), designed as an efficient catalyst for the multicomponent synthesis of 5-substituted-1H-tetrazoles (18 examples, yields 89-98%). The primary objectives were to develop and evaluate this catalyst's ability to promote the formation of tetrazoles under eco-friendly conditions. The methods involved synthesizing the catalyst by combining AlFe2O4, MWCNTs, TEA, and Ni(ii), then testing its catalytic activity using various aromatic aldehydes, hydroxylamine, and sodium azide in DMF at 50 °C. The reaction parameters, including temperature, catalyst amount, and reaction time, were optimized for maximum yield and selectivity. Results showed that the catalyst achieved high yields of tetrazoles and demonstrated significant selectivity in a remarkably short reaction time, showcasing its exceptional efficiency. The magnetism of AlFe2O4 facilitated easy recovery and recyclability (seven runs), underscoring the catalyst's sustainability. This system's advantages include its high activity, reusability, and environmentally friendly nature, making it a promising approach for green nitrogen-rich heterocycle synthesis. Prospects involve exploring the catalyst's potential in large-scale applications, expanding its use to other heterocyclic syntheses, and investigating its performance with different substrates. This work underscores the significant role of integrating magnetic nanomaterials into catalytic systems to promote sustainable and efficient organic synthesis methods, offering a promising future for the field.

N-Fluorosulfurylamidines Enable Modular Synthesis of 1,5-Disubstituted Tetrazoles

Here we report the modular synthesis of 1,5-disubstituted tetrazoles using two highly chemoselective reactions, ligations of N-fluorosulfurylamidines with amines and diazotransfer reactions between FSO2N3 and N-monosubstituted amidines, respectively. Enabled by sulfur(VI) fluoride exchange (SuFEx) click chemistry, we have successfully synthesized a series of N-fluorosulfurylamidines and identified them as stable and scalable organic synthons. We then discover that N-fluorosulfurylamidines react selectively toward a series of aliphatic amines, resulting in the formation of N-monosubstituted amidines that can react further with FSO2N3 to deliver 1,5-disubstituted tetrazoles. Our work provides a new platform for generating a library of 1,5-disubstituted tetrazoles with diverse structures, which is unprecedented.

Three-Component Synthesis of 1-Substituted 5-Aminotetrazoles Promoted by Bismuth Nitrate

A nontoxic bismuth-promoted multicomponent synthesis of 5-aminotetrazoles and bistetrazoles is reported. The reaction of phenyl isothiocyanate, NaN3, and amine (primary aliphatic, aromatic, and aliphatic diamine) promoted by Bi(NO3)3·5H2O under microwave heating affords good yields, short reaction times, simple workup, and purification without column chromatography. A set of diagnostic 1H NMR signals was identified as a guide for quickly elucidating the exclusive (or main) regioisomer formed, with the stronger electron donor group located at heterocyclic nitrogen 1. This regioselectivity is strongly dependent on the electronic density of the amine. It is opposite to that obtained by several thiourea desulfurization methods promoted by thiophilic metals and metal-free protocols.

A new Schiff base 2-benzoylpyridine-based copper complex on boehmite nanoparticles as a recoverable nanocatalyst for the homoselective synthesis of 5-substituted tetrazoles

In this study, boehmite nanoparticles (B-NPs) were prepared by a simple process and then their surface was modified by (3-aminopropyl)triethoxysilane (3-APTES). The modified B-NPs (3-APTES@B-NPs) were functionalized by 2-benzoylpyridine Schiff-base ligand toward the immobilization of the Schiff-base 2-benzoylpyridine ligand on the 3-APTES@B-NPs's surface (2BP-Schiff-base@B-NPs). Finally, copper ions were coordinated with the supported Schiff-base ligand on B-NPs toward the formation of the final catalyst (Cu-2BP-Schiff-base@B-NPs). The prepared Cu-2BP-Schiff-base@B-NPs were characterized using FT-IR spectroscopy, BET analysis, XRD, SEM, AAS, TGA, EDX and elemental mapping. Further, Cu-2BP-Schiff-base@B-NPs were applied as a homoselective and recyclable catalyst for the synthesis of a diverse range of 5-substituted tetrazoles in PEG-400 as a green solvent. The main benefits of this protocol are high homoselectivity attributes, short reaction times, high product yields and TOF values, and further addition to the catalyst ability to be recycled at least four times without significantly losing catalytic efficiency.

Innovative synthesis of drug-like molecules using tetrazole as core building blocks

Tetrazole is widely utilized as a bioisostere for carboxylic acid in the field of medicinal chemistry and drug development, enhancing the drug-like characteristics of various molecules. Typically, tetrazoles are introduced from their nitrile precursors through late-stage functionalization. In this work, we propose a novel strategy involving the use of diversely protected, unprecedented tetrazole aldehydes as building blocks. This approach facilitates the incorporation of the tetrazole group into multicomponent reactions or other chemistries, aiding in the creation of a variety of complex, drug-like molecules. These innovative tetrazole building blocks are efficiently and directly synthesized using a Passerini three-component reaction (PT-3CR), employing cost-effective and readily available materials. We further showcase the versatility of these new tetrazole building blocks by integrating the tetrazole moiety into various multicomponent reactions (MCRs), which are already significantly employed in drug discovery. This technique represents a unique and complementary method to existing tetrazole synthesis processes. It aims to meet the growing demand for tetrazole-based compound libraries and novel scaffolds, which are challenging to synthesize through other methods.

Visible Light Mediated Co-Catalyzed Isocyanide Insertion with Sulfonyl Azide: Synthesis of Sulfonyl Carbamimidic Azide and Sulfonyl Aminotetrazole via Carbodiimide Intermediate

Herein, we report an operationally simple and efficient protocol to prepare sulfonyl carbamimidic azide and N-sulfonyl aminotetrazole via Co-catalyzed three component coupling of sulfonyl azide (acts as nitrene source), isocyanide, and TMS-azide at room temperature under visible light. Initially, the carbamimidic azide is formed, which cyclizes only in the presence of base to deliver N-sulfonyl aminotetrazole in very good yields. The sulfonyl aminotetrazole can also be synthesized directly without isolating the carbamimidic azide in the presence of base. The sulfonyl azide is anticipated to generate nitrene and reacts with isocyanide to produce carbodiimide. Subsequent addition of azide (TMS-N3 ) to carbodiimide results in the formation of carbamimidic azide.

Synthesis and Cycloaddition Reactions of 1-Azido-1,1,2,2-tetrafluoroethane

A new fluorinated azidoethane─1-azido-1,1,2,2-tetrafluoroethane─was prepared in quantitative yield by the addition of an azide anion to tetrafluoroethylene in a protic medium. The title azide was shown to be thermally stable and insensitive to impact. Copper(I)-catalyzed [3 + 2] cycloaddition with alkynes afforded 4-substituted N-tetrafluoroethyl-1,2,3-triazoles which underwent rhodium(II)-catalyzed transannulation with nitriles to novel N-tetrafluoroethylimidazoles or the reaction with triflic acid to enamido triflates. [3 + 2] Cycloaddition of the title azide with primary amines afforded novel 5-difluoromethyl tetrazoles.

Multicomponent cyclization with azides to synthesize N-heterocycles

Heterocyclic compounds, both naturally derived and synthetically produced, constitute a wide variety of biologically active and industrially important compounds. The synthesis and application of heterocyclic compounds have garnered significant attention and experienced rapid growth in recent decades. Organic azides, due to their unique properties and distinctive reactivity, have become a convenient chemical tool for achieving a wide range of heterocycles such as triazoles and tetrazoles. Importantly, the field of multicomponent reaction (MCR) chemistry provides a convergent approach to access various N-heterocyclic scaffolds, offering novelty, diversity, and complexity. However, the exploration of MCR pathways to N-heterocyclic compounds remains incomplete. Here, we review the use of multicomponent reactions for the preparation of N-heterocycles. A wide range of reactions based on azides for the synthesis of various types of N-heterocyclic systems have been developed.

Marine carrageenan‐based NiO nanocatalyst in solvent‐free synthesis of polyhydroquinoline derivatives

This study presents the preparation of nickel oxide nanoparticles (NiO NPs) in the presence of marine seaweed kappa‐carrageenan (κ‐carrageenan) polysaccharide as a green stabilizer and coating agent under optimal conditions. Thermal gravimetric analyzer (TGA) and Fourier transform infrared (FTIR) results revealed thermal stability and the presence of functional groups of κ‐carrageenan‐coated NiO (NiO@κ‐Car) NPs. The color change of the solution from green to black and advent peak at 320 nm primitively confirmed the formation of NiO NPs. Further, transmission electron microscopy (TEM) images of NiO@κ‐Car demonstrate rather irregular spherical and cubic morphology, showing an average size of 18 ± 1.5 nm. Further, X‐ray diffraction (XRD) analysis confirms that NiO NPs appear as cubic crystal structures with a crystallite size of 23.7 nm. According to the turnover number (TON) and turnover frequency (TOF) results, green NiO@κ‐Car exhibits superior catalytic efficiency in one‐pot multicomponent synthesis of polyhydroquinoline derivatives under free‐solvent conditions. Hydrogen‐1 (1H) and carbon‐13 (13C) nuclear magnetic resonance (NMR) spectra indicated the successful synthesis of various organic products. The key advantages of the proposed efficient synthetic protocol include reusability of the catalyst (four runs), simple workout, high yield of the products, environmental sustainability, and solvent‐free reaction condition. A possible mechanism was also suggested, indicating the role of NiO@κ‐Car as a proficient heterogeneous nanocatalyst in the reaction.

Immobilization of Ni(ii) complex on the surface of mesoporous modified-KIT-6 as a new, reusable and highly efficient nanocatalyst for the synthesis of tetrazole and pyranopyrazole derivatives

In this paper, KIT-6@SMTU@Ni was successfully synthesized via a new method of Ni(ii) complex stabilization on modified mesoporous KIT-6, as a novel and green heterogeneous catalyst. The obtained catalyst (KIT-6@SMTU@Ni) was characterized using Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET) calculation, X-ray diffraction (XRD), atomic absorption spectroscopy (AAS), energy-dispersive X-ray spectroscopy (EDS), X-ray mapping, thermogravimetric analysis (TGA) techniques and scanning electron microscopy (SEM). After complete characterization of the catalyst, it was successfully used for the synthesis of 5-substituted 1H-tetrazoles and pyranopyrazoles. Moreover, tetrazoles were synthesized from benzonitrile derivatives and sodium azide (NaN₃). All tetrazole products were synthesized with high TON, TOF and excellent yields (88-98%) in a reasonable time (0.13-8 h), demonstrating the efficiency and practicality of the KIT-6@SMTU@Ni catalyst. Furthermore, pyranopyrazoles were prepared through the condensation reaction of benzaldehyde derivatives with malononitrile, hydrazine hydrate and ethyl acetoacetate with high TON, TOF and excellent yields (87-98%) at appropriate times (2-10.5 h). KIT-6@SMTU@Ni could be reused for five runs without any re-activation. Significantly, this plotted protocol has prominent benefits, such as applying green solvents, the use of commercially available and low-cost materials, excellent separation and reusability of the catalyst, short reaction time, high yield of products and a facile work-up.

Synthesis of Tricyclic Tetrazoles by Cascade Diazotization/Intramolecular Radical C-H Heteroarylation of Arenes

A cascade diazotization/intramolecular radical C-H heteroarylation of 1-benzyloxy-5-aminotetrazoles and 1-phenethyl-5-aminotetrazoles as substrates using sodium nitrite and acetic acid without any heating, catalysis, irradiation, or electrolysis is reported. This one-pot reaction afforded the desired tricyclic tetrazole products in good yields (up to 94%) without isolation of the diazonium salt intermediate under mild reaction conditions.

A Schiff base complex of lanthanum on modified MCM-41 as a reusable nanocatalyst in the homoselective synthesis of 5-substituted 1H-tetrazoles

In this work, mesoporous MCM-41 was modified by a new Schiff-base formed from the condensation of triethylenetatramine and 5-bromosalicylaldehyde. Then, it was used for the stabilization of lanthanum metal (La-Schiff base@MCM-41) as a homoselective, reusable, efficient and biocompatible catalyst in the synthesis of 5-substituted 1H-tetrazole derivatives. The synthesized tetrazoles were characterized using ¹H NMR and FT-IR spectroscopy and methods to measure their physical properties. La-Schiff base@MCM-41 was characterized by using various techniques such as ICP, CHN, XRD, TGA, BET, FT-IR spectroscopy, SEM, EDS and WDX. This catalyst has good stability and a heterogeneous nature, enabling it to be easily recovered and reused several times without significant loss in catalytic activity. This present strategy has important advantages such as utilizing PEG as a green solvent, short reaction times, excellent yields, easy recycling of the catalyst and pure separation of the products. The recovered La-Schiff base@MCM-41 catalyst was characterized by using FT-IR spectroscopy, SEM and AAS.

Investigation of Fe3O4@boehmite NPs as efficient and magnetically recoverable nanocatalyst in the homoselective synthesis of tetrazoles

Magnetic boehmite nanoparticles (Fe3O4@boehmite NPs) were synthesized from a hybrid of boehmite and Fe3O4 nanoparticles. At first, boehmite nanoparticles (aluminum oxide hydroxide) were prepared via a simple procedure in water using commercially available materials such as sodium hydroxide and aluminum nitrate. Then, these nanoparticles were magnetized using Fe3O4 NPs in a basic solution of FeCl2·4H2O and FeCl3·6H2O. Fe3O4@boehmite NPs have advantages of both boehmite nanoparticles and Fe3O4 magnetic materials. Magnetic boehmite nanoparticles have been characterized by various techniques such as TEM, SEM, EDS, WDX, ICP, FT-IR, Raman, XRD and VSM. SEM and TEM images confirmed that particles size are less than 50 nm in diameter with a cubic orthorhombic structure. Then, Fe3O4@boehmite NPs were applied as a homoselective, highly efficient, cheap, biocompatibility, heterogeneous and magnetically recoverable nanocatalyst in the synthesis of 5-substituted 1H-tetrazole derivatives. Fe3O4@boehmite NPs can be recycled for several runs in the synthesis of tetrazoles. Also, all tetrazoles were isolated in high yields, which reveals high activity of Fe3O4@boehmite NPs in the synthesis of tetrazole derivatives. Fe3O4@boehmite NPs shows a good homoselectivity in synthesis of 5-substituted 1H-tetrazole derivatives.

Novel ciprofloxacin and norfloxacin-tetrazole hybrids as potential antibacterial and antiviral agents: targeting S. aureus topoisomerase and SARS-CoV-2-MPro

This study was designed to synthesize hybridizing molecules from ciprofloxacin and norfloxacin by enhancing their biological activity with tetrazoles. The synthesized compounds were investigated in the interaction with the target enzyme of fluoroquinolones (DNA gyrase) and COVID-19 main protease using molecular similarity, molecular docking, and QSAR studies. A QSAR study was carried out to explore the antibacterial activity of our compounds over Staphylococcus aureus a QSAR study, using descriptors obtained from the docking with DNA gyrase, in combination with steric type descriptors, was done obtaining suitable statistical parameters (R2=87.00, QLMO2=71.67, and QEXT2=73.49) to support our results. The binding interaction of our compounds with CoV-2-Mpro was done by molecular docking and were compared with different covalent and non-covalent inhibitors of this enzyme. For the docking studies we used several crystallographic structures of the CoV-2-Mpro. The interaction energy values and binding mode with several key residues, by our compounds, support the capability of them to be CoV-2-Mpro inhibitors. The characterization of the compounds was completed using FT-IR, ¹H-NMR, ¹³C-NMR, ¹⁹F-NMR and HRMS spectroscopic methods. The results showed that compounds 1, 4, 5, 10 and 12 had the potential to be further studied as new antibacterial and antiviral compounds

New ecofriendly heterogeneous nano-catalyst for the synthesis of 1-substituted and 5-substituted 1H-tetrazole derivatives

A novel ecofriendly heterogeneous catalyst containing Schiff base coordinated Cu(II) covalently attached to Fe₃O₄@SiO₂ nanoparticles through imidazolium linker [Fe₃O₄@SiO₂-Im(Br)-SB-Cu (II)] was synthesized and characterized by using various techniques. The catalytic efficiency of this nano-catalyst was tested in water in the synthesis of tetrazole derivatives using two one-pot multicomponent reaction (MCR) models: The synthesis of 1-aryl 1H-tetrazole derivatives from the reaction of aniline, triethyl orthoformate, and sodium azide and the synthesis of 5-aryl 1H-tetrazole derivatives from the reaction of benzaldehyde, hydroxy amine hydrochloride, and sodium azide. The investigation showed that (i) The catalyst is highly efficient in the synthesis of tetrazole derivatives with high yield (97%) in aqueous medium and mild temperatures; (ii) The catalytic effectiveness is due to the synergy between the metallic center and the imidazolium ion and (iii) The reuse advantage of the catalyst without contamination or significant loss (12% of loss range) in the catalytic activity.

Synthesis of 4-Tetrazolyl-Substituted 3,4-Dihydroquinazoline Derivatives with Anticancer Activity via a One-Pot Sequential Ugi-Azide/Palladium-Catalyzed Azide-Isocyanide Cross-Coupling/Cyclization Reaction

A new one-pot preparation of 4-tetrazolyl-3,4-dihydroquinazolines has been reported. The Ugi-azide reactions of 2-azidobenzaldehydes, amines, trimethylsilyl azide, and isocyanides produced azide intermediates without separation, which were treated with isocyanides to give 4-tetrazolyl-3,4-dihydroquinazoline derivatives through a sequential Palladium-catalyzed azide-isocyanide cross-coupling/cyclization reaction in moderate to good yields. The biological evaluation demonstrated that compound 6c inhibited breast cancer cells well and displayed broad applications for synthesis and medicinal chemistry.

Functionalized Triazines and Tetrazines: Synthesis and Applications

The molecules possessing triazine and tetrazine moieties belong to a special class of heterocyclic compounds. Both triazines and tetrazines are building blocks and have provided a new dimension to the design of biologically important organic molecules. Several of their derivatives with fine-tuned electronic properties have been identified as multifunctional, adaptable, switchable, remarkably antifungal, anticancer, antiviral, antitumor, cardiotonic, anti-HIV, analgesic, anti-protozoal, etc. The objective of this review is to comprehensively describe the recent developments in synthesis, coordination properties, and various applications of triazine and tetrazine molecules. The rich literature demonstrates various synthetic routes for a variety of triazines and tetrazines through microwave-assisted, solid-phase, metal-based, [4+2] cycloaddition, and multicomponent one-pot reactions. Synthetic approaches contain linear, angular, and fused triazine and tetrazine heterocycles through a combinatorial method. Notably, the triazines and tetrazines undergo a variety of organic transformations, including electrophilic addition, coupling, nucleophilic displacement, and intramolecular cyclization. The mechanistic aspects of these heterocycles are discussed in a detailed way. The bioorthogonal application of these polyazines with various strained alkenes and alkynes provides a new prospect for investigations in chemical biology. This review systematically encapsulates the recent developments and challenges in the synthesis and possible potential applications of various triazine and tetrazine systems.

Novel hybrid isoindole-1,3(2H)-dione compounds containing a 1H-tetrazole moiety: Synthesis, biological evaluation, and molecular docking studies

In this study, novel hybrid isoindole-1,3(2H)-dione compounds (10 and 11) carrying a 1H-tetrazole moiety were synthesized, characterized and their inhibitory properties against xanthine oxidase (XO) and carbonic anhydrase isoenzymes (hCA I and hCA II) were investigated. Allopurinol for XO and acetazolamide for carbonic anhydrase isoenzymes were used as positive standards in inhibition studies. In addition, compounds 8 and 9, which were obtained in the intermediate step, were also investigated for their inhibition effects against the three enzymes. According to the enzyme inhibition results, hybrid isoindole-1,3(2H)-dione derivatives 10 and 11 showed significant inhibitory effects against all three enzymes. Surprisingly, compound 8, containing a SCN functional group, exhibited a greater inhibitory effect than the other compounds against hCA I and hCA II. The IC₅₀ values of compound 8 against hCA I and hCA II were found to be 3.698 ± 0.079 and 3.147 ± 0.083 µM, respectively. Compound 8 (IC₅₀  = 4.261 ± 0.034 μM) showed higher activity than allopurinol (IC₅₀  = 4.678 ± 0.029 μM) and the other compounds against XO, as well. These results clearly show the effect of the SCN group on the inhibition. In addition, in silico molecular docking studies were performed to understand the molecular interactions between each compound and enzymes, and the results were evaluated.

Understanding the regioselectivity of 5-substituted 1H-tetrazoles alkylation

A novel rational to account for the selectivity of 5-substituted 1H-tetrazole alkylation.

An ultrasound-assisted solvent and catalyst-free synthesis of structurally diverse pyrazole centered 1,5-disubstituted tetrazoles via one-pot four-component reaction

Abstract:

1,5-Disubstituted tetrazoles are vital drug-like scaffold usually encountered as valuable bioisosteres of cis-amide bond. In this article, we reported synthesis of some novel medicinally relevant pyrazole centered 1,5-disubstituted tetrazoles using ultrasound irradiation via a one-pot 4-C reaction from various pyrazole originated aldehyde, amine, isocyanide, and sodium azide. All the synthesized derivatives were characterized by IR, 1H NMR, 13C NMR, spectroscopic techniques, and mass analysis. This ultrasound-assisted green protocol has several advantages like mild reaction condition, high yield, catalyst and solvent-free reaction protocol, 15 minutes reaction time and easy workup.

Sustainable Passerini-tetrazole three component reaction (PT-3CR): selective synthesis of oxaborol-tetrazoles

A sustainable catalyst- and solvent-free Passerini-tetrazole three component reaction (PT-3CR) has been developed for the selective synthesis of benzoxaborol-tetrazoles for the first time. The synthetic potential of oxaboroles was demonstrated towards various functionalized tetrazoles, which are otherwise difficult to achieve through conventional PT-3CR from aromatic aldehydes/ketones. The reaction features high practicality, broad substrate scope and excellent yields (80-98%). Preliminary results of the asymmetric PT-3CR are also shown for the synthesis of chiral benzoxaboroles.

Alkylation of 5-Substituted 1H-Tetrazoles via the Diazotization of Aliphatic Amines

A new alkylation reaction of monosubstituted tetrazoles via the diazotization of aliphatic amines is reported. This method enables preferential formation of 2,5-disubstituted tetrazoles. A one-pot 1,3-dipolar cycloaddition/diazotization sequence starting from widely available nitriles is also described. Azide residues are quenched in the second step with the nitrite reagent, thus limiting the intrinsic risk associated with trimethylsilyl azide. The reaction conditions were compatible with several functional groups, including thiocyanates, which afford preferentially disubstituted 2-alkyl-5-(substituted-thio)tetrazoles.

Diazocarbonyl and Related Compounds in the Synthesis of Azoles

Diazocarbonyl compounds have found numerous applications in many areas of chemistry. Among the most developed fields of diazo chemistry is the preparation of azoles from diazo compounds. This approach represents a useful alternative to more conventional methods of the synthesis of azoles. A comprehensive review on the preparation of various azoles (oxazoles, thiazoles, imidazoles, pyrazoles, triazoles, and tetrazoles) from diazocarbonyl and related compounds is presented for the first time along with discussion of advantages and disadvantages of «diazo» approaches to azoles.

Synthesis of 1,5-Disubstituted Tetrazoles in Aqueous Micelles at Room Temperature

The ongoing study is a Ugi-azide four-component reaction for the synthesis of 1,5-disubstituted tetrazole(1,5-DST), which involves an aldehyde, different amines, isocyanides, and as azide’s source the Trimethylsilylazide (TMSN3), in water as solvent using as catalyst the tetradecyltrimethylammonium bromide (TTAB) with a load of (10% mole), which provides a hydrophobic micellar reaction site. This approach is a step toward a green chemistry reaction of 1,5 disubstituted tetrazole. A serie of 1, 5- disubstituted tetrazole was synthesized by engaging a large substrate scope, leading to yields between 43% and 56%, which are compared afterwards with those obtained with methanol as solvent. The results were confirmed by HRMS, IR, and 1D NMR experiments.

Magnetization of biochar nanoparticles as a novel support for fabrication of organo nickel as a selective, reusable and magnetic nanocatalyst in organic reactions

Waste recycling is important process in green chemistry and economic efficiency. Herein, magnetized biochar nanoparticles were modified under green and environmentally friendly method and further were applied as reusable catalyst in organic reactions.

An Expeditious Approach to Tetrazoles from Amides Utilizing Phosphorazidates

A novel method was developed for the synthesis of tetrazoles from amides utilizing diphenyl phosphorazidate or bis(p-nitrophenyl) phosphorazidate as both the activator of amide-oxygen for elimination and azide source. Various amides were converted into the corresponding tetrazoles in good yields. This synthetic method allows to prepare 1,5-disubstituted and 5-substituted 1H-tetrazoles from various amides without the use of toxic or explosive reagents.

One-Pot Synthesis of γ-Azidobutyronitriles and Their Intramolecular Cycloadditions

Efficient gram-scale, one-pot approaches to azidocyanobutyrates and their amidated or decarboxylated derivatives have been developed, starting from commercially available aldehydes and cyanoacetates. These techniques combine (1) Knoevenagel condensation, (2) Corey–Chaykovsky cyclopropanation and (3) nucleophilic ring opening of donor-acceptor cyclopropanes with the azide ion, as well as (4) Krapcho decarboxylation or (4′) amidation. The synthetic utility of the resulting γ-azidonitriles was demonstrated by their transformation into tetrazoles via intramolecular (3+2)-cycloaddition. A condition-dependent activation effect of the α-substituent was revealed in that case. Thermally activated azide–nitrile interaction did not differentiate the presence of an α-electron-withdrawing substituent in γ-azidonitriles, whereas the Lewis acid mediated (SnCl4 or TiCl4) reaction proceeded much easier for azidocyanobutyrates. This allowed us to develop an efficient procedure for converting azidocyanobutyrates into the corresponding tetrazoles.