Postprandial Changes in Solubilizing Capacity of Human Intestinal Fluids for BCS Class II Drugs

Exploring biorelevant conditions and release profiles of ritonavir from HPMCAS-based amorphous solid dispersions

Development of a release test for amorphous solid dispersions (ASDs) that is in vivo predictive is essential to identify optimally performing formulations early in development. For ASDs containing an enteric polymer, consideration of buffer properties is essential. Herein, release rates of hydroxypropyl methyl cellulose acetate succinate (HPMCAS) and ritonavir from ASDs with a 20% drug loading were compared in phosphate and bicarbonate buffers with different molarities, at pH 6.5. The bioaccessibility of ritonavir from the ASD in the tiny-TIM apparatus was also evaluated and compared to that of the crystalline drug. The surface pH at the dissolving solid: solution interface was evaluated using a pH-sensitive fluorescence probe for HPMCAS and ASD compacts in phosphate and bicarbonate buffers. Drug and polymer were found to release congruently in all buffer systems, indicating that the polymer controlled the drug release. Release was slowest in 10 mM bicarbonate buffer, and much faster in phosphate buffers with molarities typically used in release testing (20-50 mM). Release from the 10 mM bicarbonate buffer was matched in a 5 mM phosphate buffer. The surface pH of HPMCAS and HPMCAS:ritonavir ASDs was found to be lower than the bulk solution pH, where surface pH differences largely explained release rate differences seen in the different buffer systems. Ritonavir was highly bioaccessible from the ASD, as assessed by the tiny-TIM system, and much less bioaccessible when crystalline drug was used. The observations highlight the need for continued development of biorelevant assays tailored for ASD formulation assessment.

PBPK/PD Modeling of Nifedipine for Precision Medicine in Pregnant Women: Enhancing Clinical Decision-Making for Optimal Drug Therapy

OBJECTIVE

This study aims to develop physiologically based pharmacokinetic and pharmacodynamic (PBPK/PD) predictive models for nifedipine in pregnant women, enhancing precision medicine and reducing adverse reactions for both mothers and infants.

METHODS

A PBPK/PD model was constructed using PK-Sim, MoBi, and MATLAB software, integrating literature and pregnancy-specific physiological information. The process involved: (1) establishing and validating a PBPK model for serum clearance after intravenous administration in non-pregnant individuals, (2) establishing and validating a PBPK model for serum clearance after oral administration in non-pregnant individuals, (3) constructing and validating a PBPK model for enzyme clearance after oral administration in non-pregnant individuals, and (4) adjusting the PBPK model structure and enzyme parameters according to pregnant women and validating it in oral administration. (5) PK/PD model was explored through MATLAB, and the PBPK and PK/PD models were integrated to form the PBPK/PD model.

RESULTS

The Nifedipine PBPK model's predictive accuracy was confirmed by non-pregnant and pregnant validation studies. The developed PBPK/PD model accurately predicted maximum antihypertensive effects for clinical doses of 5, 10, and 20 mg. The model suggested peak effect at 0.86 h post-administration, achieving blood pressure reductions of 5.4 mmHg, 14.3 mmHg, and 21.3 mmHg, respectively. This model provides guidance for tailored dosing in pregnancy-induced hypertension based on targeted blood pressure reduction.

CONCLUSION

Based on available literature data, the PBPK/PD model of Nifedipine in pregnancy demonstrated good predictive performance. It will help optimize individualized dosing of Nifedipine, improve treatment outcomes, and minimize the risk of adverse reactions in mothers and infants.

Structured solubility behaviour in fed simulated intestinal fluids

Intestinal drug solubility is a key parameter controlling absorption after the administration of a solid oral dosage form. The ability to measure fed state solubility in vitro is limited and multiple simulated intestinal fluid recipes have been developed but with no consensus which is optimal. This study has utilised nine bioequivalent simulated fed intestinal media recipes that cover over 90% of the compositional variability of sampled fed human intestinal fluid. The solubility of 24 drugs (Acidic; furosemide, ibuprofen, indomethacin, mefenamic acid, naproxen, phenytoin, piroxicam, valsartan, zafirlukast: Basic; aprepitant, atazanavir, bromocriptine, carvedilol, dipyridamole, posaconazole, tadalafil: Neutral; acyclovir, carbamazepine, felodipine, fenofibrate, griseofulvin, itraconazole, paracetamol, probucol) has been assessed to determine if structured solubility behaviour is present. The measured solubility behaviour can be split into four categories and is consistent with drug physicochemical properties and previous solubility studies. For acidic drugs (category 1) solubility is controlled by media pH and the lowest and highest pH media identify the lowest and highest solubility in 90% of cases. For weakly acidic, basic and neutral drugs (category 2) solubility is controlled by media pH and total amphiphile concentration (TAC), a consistent solubility pattern is evident with variation related to individual drug media component interactions. The lowest and highest pH × TAC media identify the lowest and highest solubility in 70% and 90% of cases respectively. Four drugs, which are non-ionised in the media systems (category 3), have been identified with a very narrow solubility range, indicating minimal impact of the simulated media on solubility. Three drugs exhibit solubility behaviour that is not consistent with the remainder (category 4). The results indicate that the use of two bioequivalent fed intestinal media from the original nine will identify in vitro the maximum and minimum solubility values for the majority of drugs and due to the media derivation this is probably applicable in vivo. When combined with a previous fasted study, this introduces interesting possibilities to measure a solubility range in vitro that can provide Quality by Design based decisions to rationalise drug and formulation development. Overall this indicates that the multi-dimensional media system is worthy of further investigation as in vitro tool to assess fed intestinal solubility.

Prediction of Oral Drug Absorption in Rats from In Vitro Data

PURPOSE

In drug discovery, rats are widely used for pharmacological and toxicological studies. We previously reported that a mechanism-based oral absorption model, the gastrointestinal unified theoretical framework (GUT framework), can appropriately predict the fraction of a dose absorbed (Fa) in humans and dogs. However, there are large species differences between humans and rats. The purpose of the present study was to evaluate the predictability of the GUT framework for rat Fa.

METHOD

The Fa values of 20 model drugs (a total of 39 Fa data) were predicted in a bottom-up manner. Based on the literature survey, the bile acid concentration (C_bile) and the intestinal fluid volume were set to 15 mM and 4 mL/kg, respectively, five and two times higher than in humans. LogP, pK_a, molecular weight, intrinsic solubility, bile micelle partition coefficients, and Caco-2 permeability were used as input data.

RESULTS

The Fa values were appropriately predicted for highly soluble drugs (absolute average fold error (AAFE) = 1.65, 18 Fa data) and poorly soluble drugs (AAFE = 1.57, 21 Fa data). When the species difference in C_bile was ignored, Fa was over- and under-predicted for permeability and solubility limited cases, respectively. High C_bile in rats reduces the free fraction of drug molecules available for epithelial membrane permeation while increasing the solubility of poorly soluble drugs.

CONCLUSION

The Fa values in rats were appropriately predicted by the GUT framework. This result would be of great help for a better understanding of species differences and model-informed preclinical formulation development.

Molecular Dynamics Simulations of Self-Assembling Colloids in Fed-State Human Intestinal Fluids and Their Solubilization of Lipophilic Drugs

Bioavailability of oral drugs often depends on how soluble the active pharmaceutical ingredient is in the fluid present in the small intestine. For efficient drug discovery and development, computational tools are needed for estimating this drug solubility. In this paper, we examined human intestinal fluids collected in the fed state, with coarse-grained molecular dynamics simulations. The experimentally obtained concentrations in aspirated duodenal fluids from five healthy individuals were used in three simulation sets to evaluate the importance of the initial distribution of molecules and the presence of glycerides in the simulation box when simulating the colloidal environment of the human intestinal fluid. We observed self-assembly of colloidal structures of different types: prolate, elongated, and oblate micelles, and vesicles. Glycerides were important for the formation of vesicles, and their absence was shown to induce elongated micelles. We then simulated the impact of digestion and absorption on the different colloidal types. Finally, we looked at the solubilization of three model compounds of increasing lipophilicity (prednisolone, fenofibrate, and probucol) by calculating contact ratios of drug-colloid to drug-water. Our simulation results of colloidal interactions with APIs were in line with experimental solubilization data but showed a dissimilarity to solubility values when comparing fasted-/fed-state ratios between two of the APIs. This work shows that coarse-grained molecular dynamics simulation is a promising tool for investigation of the intestinal fluids, in terms of colloidal attributes and drug solubility.

Structured solubility behaviour in bioequivalent fasted simulated intestinal fluids

Drug solubility in intestinal fluid is a key parameter controlling absorption after the administration of a solid oral dosage form. To measure solubility in vitro simulated intestinal fluids have been developed, but there are multiple recipes and the optimum is unknown. This situation creates difficulties during drug discovery and development research. A recent study characterised sampled fasted intestinal fluids using a multidimensional approach to derive nine bioequivalent fasted intestinal media that covered over 90% of the compositional variability. These media have been applied in this study to examine the equilibrium solubility of twenty one exemplar drugs (naproxen, indomethacin, phenytoin, zafirlukast, piroxicam, ibuprofen, mefenamic acid, furosemide, aprepitant, carvedilol, tadalafil, dipyridamole, posaconazole, atazanavir, fenofibrate, felodipine, griseofulvin, probucol, paracetamol, acyclovir and carbamazepine) to determine if consistent solubility behaviour was present. The bioequivalent media provide in the majority of cases structured solubility behaviour that is consistent with physicochemical properties and previous solubility studies. For the acidic drugs (pKa < 6.3) solubility is controlled by media pH, the profile is identical and consistent and the lowest and highest pH media identify the lowest and highest solubility in over 70% of cases. For weakly acidic (pKa > 8), basic and neutral drugs solubility is controlled by a combination of media pH and total amphiphile concentration (TAC), a consistent solubility behaviour is evident but with variation related to individual drug interactions within the media. The lowest and highest pH x TAC media identify the lowest and highest solubility in over 78% of cases. A subset of the latter category consisting of neutral and drugs non-ionised in the media pH range have been identified with a very narrow solubility range, indicating that the impact of the simulated intestinal media on their solubility is minimal. Two drugs probucol and atazanavir exhibit unusual behaviour. The study indicates that the use of two appropriate bioequivalent fasted intestinal media from the nine will identify in vitro the maximum and minimum solubility boundaries for drugs and due to the media derivation this is probably applicable in vivo. These media could be applied during discovery and development activities to provide a solubility range, which would assist placement of the drug within the BCS/DCS and rationalise drug and formulation decisions.

Bio-enabling strategies to mitigate the pharmaceutical food effect: a mini review

The concomitant administration of oral drugs with food can result in significant changes in bioavailability, leading to variable pharmacokinetics and considerable clinical implications, such as over- or under-dosing. Consequently, there is increasing demand for bio-enabling formulation strategies to reduce variability in exposure between the fasted and fed state and/or mitigate the pharmaceutical food effect. The current review critically evaluates technologies that have been implemented to overcome the positive food effects of pharmaceutical drugs, including, lipid-based formulations, nanosized drug preparations, cyclodextrins, amorphisation and solid dispersions, prodrugs and salts. Additionally, improved insight into preclinical models for predicting the food effect is provided. Despite the wealth of research, this review demonstrates that application of optimal formulation strategies to mitigate the positive food effects and the evaluation in preclinical models is not a universal approach, and improved standardisation of models to predict the food effects would be desirable. Ultimately, the successful reformulation of specific drugs to eliminate the food effect provides a panoply of advantages for patients with regard to clinical efficacy and compliance.

UNGAP best practice for improving solubility data quality of orally administered drugs

An important goal of the European Cooperation in Science and Technology (COST) Action UNGAP (UNderstanding Gastrointestinal Absorption-related Processes, www.ungap.eu) is to improve standardization of methods relating to the study of oral drug absorption. Solubility is a general term that refers to the maximum achievable concentration of a compound dissolved in a liquid medium. For orally administered drugs, relevant information on drug properties is crucial during drug (product) development and at the regulatory level. Collection of reliable and reproducible solubility data requires careful application and understanding of the limitations of the selected experimental method. In addition, the purity of a compound and its solid state form, as well as experimental parameters such as temperature of experimentation, media related factors, and sample handling procedures can affect data quality. In this paper, an international consensus developed by the COST UNGAP network on recommendations for collecting high quality solubility data for the development of orally administered drugs is proposed.

The effect of buffer species on biorelevant dissolution and precipitation assays - Comparison of phosphate and bicarbonate buffer

Biorelevant solubility and dissolution testing is an important tool during pharmaceutical development, however, solubility experiments performed using biorelevant media often do not properly match the solubility data observed in human intestinal fluids. Even though the bicarbonate buffer is the predominant buffer system in the small intestine, in vitro assays are commonly performed using non-volatile buffer systems like phosphate and maleate. In the current study, bicarbonate- and phosphate-buffered biorelevant media were applied to solubility, dissolution, and precipitation testing for a broad range of model compounds. It was found that the medium affects primarily the dissolution kinetics. However, with the knowledge of the unique buffering properties of bicarbonate buffer in the diffusion layer, it was not always possible to predict the effect of buffer species on solubility and dissolution when changing from phosphate to bicarbonate buffer. This once again highlights the special role of bicarbonate buffer for simulating the conditions in the human intestinal fluids. Moreover, it is necessary to further investigate the factors which may cause the differences in solubility and dissolution behavior when using phosphate- vs. bicarbonate-buffered biorelevant media.

Impact of gastrointestinal tract variability on oral drug absorption and pharmacokinetics: An UNGAP review

The absorption of oral drugs is frequently plagued by significant variability with potentially serious therapeutic consequences. The source of variability can be traced back to interindividual variability in physiology, differences in special populations (age- and disease-dependent), drug and formulation properties, or food-drug interactions. Clinical evidence for the impact of some of these factors on drug pharmacokinetic variability is mounting: e.g. gastric pH and emptying time, small intestinal fluid properties, differences in pediatrics and the elderly, and surgical changes in gastrointestinal anatomy. However, the link of colonic factors variability (transit time, fluid composition, microbiome), sex differences (male vs. female) and gut-related diseases (chronic constipation, anorexia and cachexia) to drug absorption variability has not been firmly established yet. At the same time, a way to decrease oral drug pharmacokinetic variability is provided by the pharmaceutical industry: clinical evidence suggests that formulation approaches employed during drug development can decrease the variability in oral exposure. This review outlines the main drivers of oral drug exposure variability and potential approaches to overcome them, while highlighting existing knowledge gaps and guiding future studies in this area.

Exploring the Impact of Intestinal Fluid Components on the Solubility and Supersaturation of Danazol

Eleven simulated intestinal fluids (SIF) were designed using a Design of Experiment (DoE) approach. The DoE SIF covered a range of compositions of fasted state human intestinal fluid (FaHIF) with regard to pH, bile salt (BS), and phospholipid (PL). Using the model compound danazol, the apparent crystalline solubility (aCS) and apparent amorphous solubility (aAS), as well as the supersaturation propensity was determined in the DoE SIF media. The aCS of danazol was dependent on the composition of the SIF, with PL as the main factor, and a small effect from BS and an interaction between BS and PL. From the DoE solubility data a model was derived, which could predict aCS in commercially available SIF (FaSSIF-V1 and -V2) and in a range of FaHIF. The aAS of danazol was differently affected by the SIF composition than the aCS; PL was again the main factor influencing the aAS, but interactions between BS and pH, as well as pH and PL were also important. The supersaturation propensities of danazol in the DoE SIF media were affected by the same factors as the aCS. Hence, the supersaturation behaviour and aCS of danazol, were found to be closely related.

Anti-obesity effect with reduced adverse effect of the co-administration of mini-tablets containing orlistat and mini-tablets containing xanthan gum: In vitro and in vivo evaluation

The purpose of this study was to develop an oral dosage form of orlistat for the treatment of obesity with reduced adverse effects, for example, fatty and oily stool that have been reported to be associated with the mechanism of action of orlistat. Based on the in vitro results obtained in this study, xanthan gum was selected as an oil-entrapping agent. Thus, the co-administration of mini-tablets containing orlistat and mini-tablets containing xanthan gum was proposed as the optimized dosage form for orlistat. The prepared mini-tablets showed an equivalent drug release profile with a similarity factor value, f₂, more than 50 to that of commercially marketed orlistat immediate-release capsules, Xenical® capsules. In addition, the optimized formulation also showed the in vivo anti-obesity effects similar to those of Xenical® capsules. In particular, the analysis of feces excreted by Sprague-Dawley rats revealed that the optimized formulation resulted in significantly less oily stool, steatorrhea, than Xenical® capsules (P < 0.05). Consequently, the proposed formulation, the co-administration of mini-tablets containing orlistat and mini-tablets containing xanthan gum, may be considered as a promising anti-obesity treatment with reduced adverse effects related to orlistat.

Characterisation of fasted state gastric and intestinal fluids collected from children

Fundamental knowledge about the composition of intestinal fluids in paediatric populations is currently unavailable. This study aimed to characterise gastric and intestinal fluid from paediatric populations. Gastric and intestinal fluid samples were obtained during routine clinical endoscopy from paediatric patients at a large teaching hospital. These fluids were characterised to measure the pH; buffer capacity; osmolality; bile acid concentration and composition. A total of 55 children were recruited to the study aged from 11 months to 15 years of age where 53 gastric fluid samples and 40 intestinal fluid samples were obtained. pH values recorded ranged from pH 0.57 to 11.05 (median: 2.50) in gastric fluids and from 0.89 to 8.97 (median: 3.27) in intestinal fluids. The buffer capacity did not change significantly between gastric and intestinal fluids with median values of 12 mM/L/ΔpH for both fluids. Gastric fluid osmolality values ranged from 1 to 615 mOsm/kg, while intestinal fluid values ranged from 35 to 631 mOsm/kg. Gastric fluid bile acid concentrations ranged from 0.002 to 2.3 mM with a median value of 0.017 mM whilst intestinal fluid bile acid concentrations ranged from 0.0008 to 3.3 mM with a median value of 0.178 mM. Glycocholate; taurocholic acid; glycochenodeoxycholate and taurochenodeoxycholate were the most commonly identified bile acids within paediatric intestinal fluids. All compositional components were associated with large inter-individual variability. Further work is required to develop simulated paediatric media and to explore the impact of these media on drug solubility and dissolution.

Design of multicomponent indomethacin-paracetamol and famotidine loaded nanoparticles for sustained and effective anti-inflammatory therapy

Indomethacin is one of the nonsteroidal anti-inflammatory drugs (NSAIDs) that are widely prescribed drug for pain and inflammation. However, its notoriety of causing gastrointestinal effect, low water solubility, and its short half-life would affect patient compliance and its oral absorption and accordingly justify the need to develop a formula with a controlled and sustained release manner in combination with anti-ulcer drugs. Herein, we synthesized indomethacin-paracetamol co-drug loaded in nanoemulsion and encapsulated in famotiditine loaded polycaprolactone (PCL) nanoparticles. The synthesis of the co-drug was achieved by the formation of a hydrolyzable ester between the indomethacin and paracetamol. The synthesized co-drug was preloading in nanoemulsion (Co-NE), which encapsulated into famotidine PCL nanoparticles utilizing the nanoprecipitation approach. The developed nanosystem showed hydrodynamic size less than 200 nm and the zeta potential value above -30 mV. TEM images confirmed the morphological structure of the formed nanoemulsion and the loaded PCL nanoparticles. Stability studies revealed that the developed nanosystem was stable at different temperatures and pHs over 1 month. Moreover, improvement of the solubilities of these three drugs leading to have a controlled-release multicomponent system of both co-drug and famotidine over 3 days. This multicomponent nanoparticle might be a potential platform to overcome the obstacles of NSAIDs, synergize drugs with different mechanisms of actions by co-encapsulating a small-sized nanoemulsion into PCL nanoparticles for reaching the goal of effective anti-inflammatory therapy.

RP-HPLC Method Development and Validation of Synthesized Codrug in Combination with Indomethacin, Paracetamol, and Famotidine

BACKGROUND

Indomethacin is considered a potent nonsteroidal anti-inflammatory drug that could be combined with Paracetamol to have superior and synergist activity to manage pain and inflammation. To reduce the gastric side effect, they could be combined with Famotidine. Methodology. A codrug of Indomethacin and Paracetamol was synthesized and combined in solution with Famotidine. The quantification of the pharmaceutically active ingredients is pivotal in the development of pharmaceutical formulations. Therefore, a novel reverse-phase high-performance liquid chromatography (RP-HPLC) method was developed and validated according to the International Council for Harmonization (ICH) Q2R1 guidelines. A reverse phase C18 column with a mobile phase acetonitrile: sodium acetate buffer 60 : 40 at a flow rate of 1.4 mL/min and pH 5 was utilized.

RESULTS

The developed method showed good separation of the four tested drugs with a linear range of 0.01-0.1 mg/mL (R 2 > 0.99). The LODs for FAM, PAR, IND, and codrug were 3.076 × 10-9, 3.868 × 10-10, 1.066 × 10-9, and 4.402 × 10-9 mg/mL respectively. While the LOQs were 9.322 × 10-9, 1.172 × 10-10, 3.232 × 10-9, and 1.334 × 10-8 mg/mL, respectively. Furthermore, the method was precise, accurate, selective, and robust with values of relative standard deviation (RSD) less than 2%. Moreover, the developed method was applied to study the in vitro hydrolysis and conversion of codrug into Indomethacin and Paracetamol.

CONCLUSION

The codrug of Indomethacin and Paracetamol was successfully synthesized for the first time. Moreover, the developed analytical method, to our knowledge, is the first of its kind to simultaneously quantify four solutions containing the following active ingredients of codrug, Indomethacin, Paracetamol, and Famotidine mixture with added pharmaceutical inactive ingredients in one HPLC run.

Melt Amorphisation of Orlistat with Mesoporous Silica Using a Supercritical Carbon Dioxide: Effects of Pressure, Temperature, and Drug Loading Ratio and Comparison with Other Conventional Amorphisation Methods

The aim of this work was to develop an amorphous orlistat-loaded mesoporus silica formulation using the melt-amorphisation by supercritical fluid (MA-SCF) and to investigate the effects of pressure and temperature on the pharmaceutical properties of the developed formulation. In addition, the effect of orlistat mass ratio to the mesoporus silica was also evaluated. The carbon dioxide was used as a supercritical fluid, and Neusilin^®UFL2 was selected as the mesoporous silica. For comparison with conventional amorphisation methods, orlistat formulations were also prepared by solvent evaporation and hot melt methods. Various pharmaceutical evaluations including differential scanning calorimetry, powder X-ray diffraction, scanning electron microscopy, specific surface area, total pore volume, and content uniformity were performed to characterise the prepared orlistat formulation. The melting point depression and the solubility of orlistat in supercritical carbon dioxide (SC-CO₂) were selected for the interpretation of evaluated results in relation to temperature and pressure. The total pore volume of the prepared orlistat-loaded mesoporus silica decreased with an increasing density of SC-CO₂ to about 500 g/L at a constant temperature or pressure. From these results, it was suggested that increasing the density of SC-CO₂ to about 500 g/L could result in the easier penetration of CO₂ into molten orlistat and lower viscosity, hence facilitating the introduction and loading of orlistat into the pores of Neusilin^®UFL2. However, when the density of SC-CO₂ increased to more than 500 g/L, the total pore volume increased, and this may be due to the release out of orlistat from the pores of Neusilin^®UFL2 by the increased orlistat solubility in SC-CO₂. Interestingly, as the total pore volume decreased by the filling of the drug, the drug crystallinity decreased; hence, the dissolution rate increased. Furthermore, it was shown that the most desirable mass ratio of Neusilin^®UFL2:orlistat for the amorphisation was 1:0.8 at an optimised supercritical condition of 318 K and 10 MPa. Compared with other amorphisation methods, only the sample prepared by the MA-SCF method was in pure amorphous state with the fastest dissolution rate. Therefore, it was concluded that the amorphous orlistat-loaded mesoporus silica prepared using MA-SCF under optimised conditions was more advantageous for enhancing the dissolution rate of orlistat than other conventional amorphisation methods.

Pharmaceutical Characterization and In Vivo Evaluation of Orlistat Formulations Prepared by the Supercritical Melt-Adsorption Method Using Carbon Dioxide: Effects of Mesoporous Silica Type

Orlistat, an anti-obesity drug, has two critical issues—the first is its low efficacy due to low water solubility and the second is side effects such as oily spotting due to its lipase inhibition. The present study was designed to propose a solution using a formulation with mesoporous silica to simultaneously overcome two issues. Orlistat was loaded onto mesoporous silica by the supercritical melt-adsorption (SCMA) method, using carbon dioxide (CO₂). Various types of mesoporous silica were used as adsorbents, and the effects of the pore volume, diameter and particle size of mesoporous silica on the pharmaceutical characteristics were evaluated by various solid-state characterization methods and in vitro and in vivo studies in relation to pharmacological efficacy and the improvement of side effects. The results showed that the pore volume and diameter determine loadable drug amount inside pores and crystallinity. The dissolution was significantly influenced by crystallinity, pore diameter and particle size, and the inhibition of lipase activity was in proportion to the dissolution rate. In vivo studies revealed that the serum triglyceride (TG) concentration was significantly decreased in the group administered amorphous orlistat-loaded Neuisilin^®UFL2 with the highest in vitro dissolution rate and lipase activity inhibition in comparison to the commercial product. Furthermore, oily spotting tests in rats revealed that undigested oil was adsorbed onto mesoporous silica after orlistat was released in the gastro-intestinal tract, and it correlated with in vitro result that oil adsorption capacity was dependent on the surface area of empty mesoporous silica. Therefore, it was concluded that mesoporous silica type plays a major role in determining the pharmaceutical characteristics of orlistat formulation prepared using SCMA with CO₂ for improving the low solubility and overcoming the side effects.

Interplay of Supersaturation and Solubilization: Lack of Correlation between Concentration-Based Supersaturation Measurements and Membrane Transport Rates in Simulated and Aspirated Human Fluids

Supersaturating formulations are increasingly being used to improve the absorption of orally administered poorly water-soluble drugs. To better predict outcomes in vivo, we must be able to accurately determine the degree of supersaturation in complex media designed to provide a surrogate for the gastrointestinal environment. Herein, we demonstrate that relying on measurements based on consideration of the total dissolved concentration leads to underestimation of supersaturation and consequently membrane transport rates. Crystalline and amorphous solubilities of two compounds, atazanavir and posaconazole, were evaluated in six different media. Concurrently, diffusive flux measurements were performed in a side-by-side diffusion cell to determine the activity-based supersaturation by evaluating membrane transport rates at the crystalline and amorphous solubilities. Solubility values were found to vary in each medium because of different solubilization capacities. Concentration-based supersaturation ratios were also found to vary for the different media. Activity-based measurements, however, were largely independent of the medium, leading to relatively constant values for the estimated supersaturation. These findings have important consequences for modeling and prediction of supersaturation impact on the absorption rate as well as for better defining the thermodynamic driving force for crystallization in complex media.

A Physiologically Based Pharmacokinetic Model for Pregnant Women to Predict the Pharmacokinetics of Drugs Metabolized Via Several Enzymatic Pathways

BACKGROUND

Physiologically based pharmacokinetic modeling is considered a valuable tool for predicting pharmacokinetic changes in pregnancy to subsequently guide in-vivo pharmacokinetic trials in pregnant women. The objective of this study was to extend and verify a previously developed physiologically based pharmacokinetic model for pregnant women for the prediction of pharmacokinetics of drugs metabolized via several cytochrome P450 enzymes.

METHODS

Quantitative information on gestation-specific changes in enzyme activity available in the literature was incorporated in a pregnancy physiologically based pharmacokinetic model and the pharmacokinetics of eight drugs metabolized via one or multiple cytochrome P450 enzymes was predicted. The tested drugs were caffeine, midazolam, nifedipine, metoprolol, ondansetron, granisetron, diazepam, and metronidazole. Pharmacokinetic predictions were evaluated by comparison with in-vivo pharmacokinetic data obtained from the literature.

RESULTS

The pregnancy physiologically based pharmacokinetic model successfully predicted the pharmacokinetics of all tested drugs. The observed pregnancy-induced pharmacokinetic changes were qualitatively and quantitatively reasonably well predicted for all drugs. Ninety-seven percent of the mean plasma concentrations predicted in pregnant women fell within a twofold error range and 63% within a 1.25-fold error range. For all drugs, the predicted area under the concentration-time curve was within a 1.25-fold error range.

CONCLUSION

The presented pregnancy physiologically based pharmacokinetic model can quantitatively predict the pharmacokinetics of drugs that are metabolized via one or multiple cytochrome P450 enzymes by integrating prior knowledge of the pregnancy-related effect on these enzymes. This pregnancy physiologically based pharmacokinetic model may thus be used to identify potential exposure changes in pregnant women a priori and to eventually support informed decision making when clinical trials are designed in this special population.

Topography of Simulated Intestinal Equilibrium Solubility

Oral administration of a solid dosage form requires drug dissolution in the gastrointestinal tract before absorption. Solubility is a key factor controlling dissolution, and it is recognized that, within the intestinal tract, this is influenced by the luminal fluid pH, amphiphile content, and composition. Various simulated intestinal fluid recipes have been introduced to mimic this behavior and studied using a range of different experimental techniques. In this article, we have measured equilibrium solubility utilizing a novel four component mixture design (4CMD) with biorelevant amphiphiles (bile salt, phospholipid, oleate, and monoglyceride) within a matrix of three pH values (5, 6, and 7) and total amphiphile concentrations (11.7, 30.6, and 77.5 mM) to provide a topographical and statistical overview. Three poorly soluble drugs representing acidic (indomethacin), basic (carvedilol), and neutral (fenofibrate) categories have been studied. The macroscopic solubility behavior agrees with literature and exhibits an overall increasing solubility from low pH and total amphiphile concentration to high pH and total amphiphile concentration. Within the matrix, all three drugs display different topographies, which can be related to the statistical effect levels of the individual amphiphiles or amphiphile interactions on solubility. The study also identifies previously unreported three and four way factor interactions notably between bile salt, phospholipid, pH, and total amphiphile concentration. In addition, the results also reveal that solubility variability is linked to the number of amphiphiles and the respective ratios in the measurement fluid, with the minimum variation present in systems containing all four amphiphiles. The individual 4CMD experiments within the matrix can be linked to provide a possible intestinal solubility window for each drug that could be applied in PBPK modeling systems. Overall the approach provides a novel overview of intestinal solubility topography along with greater detail on the impact of the various factors studied; however, each matrix requires 351 individual solubility measurements. Further studies will be required to refine the experimental protocol in order the maximize information garnered while minimizing the number of measurements required.

On the unphysical hypotheses in pharmacokinetics and oral drug absorption: Time to utilize instantaneous rate coefficients instead of rate constants

This work aims to explore the unphysical assumptions associated with i) the homogeneity of the well mixed compartments of pharmacokinetics and ii) the diffusion limited model of drug dissolution. To this end, we i) tested the homogeneity hypothesis using Monte Carlo simulations for a reaction and a diffusional process that take place in Euclidean and fractal media, ii) re-considered the flip-flop kinetics assuming that the absorption rate for a one-compartment model is governed by an instantaneous rate coefficient instead of a rate constant, and, iii) re-considered the extent of drug absorption as a function of dose using an in vivo reaction limited model of drug dissolution with integer and non-integer stoichiometry values. We found that drug diffusional processes and reactions are slowed down in heterogeneous media and the environmental heterogeneity leads to increased fluctuations of the measurable quantities. Highly variable experimental literature data with measurements in intrathecal space and gastrointestinal fluids were explained accordingly. Next, by applying power law and Weibull input functions to a one-compartment model of disposition we show that the shape of concentration-time curves is highly dependent on the time exponent of the input functions. Realistic examples based on PK data of three compounds known to exhibit flip-flop kinetics are analyzed. The need to use time dependent coefficients instead of rate constants in PBPK modeling and virtual bioequivalence is underlined. Finally, the shape of the fraction absorbed as a function of dose plots, using an in vivo reaction limited model of drug dissolution were found to be dependent on the stoichiometry value and the solubility of drug. Ascending and descending limbs were observed for the higher stoichiometries (2.0 and 1.5) with the low solubility drug. In contrast, for the more soluble drug, a continuous increase of fraction absorbed as a function of dose is observed when the higher stoichiometries are used (2.0 and 1.5). For both drugs, the fraction absorbed for the lower values of stoichiometry (0.7 and 1.0) exhibit a non-dependency on dose profile. Our results give an insight into the complex picture of in vivo drug dissolution since diffusion-limited and reaction-limited processes seem to operate under in vivo conditions concurrently.

Linking the Gastrointestinal Behavior of Ibuprofen with the Systemic Exposure between and within Humans-Part 2: Fed State

Exploring the intraluminal behavior of an oral drug product in the human gastrointestinal (GI) tract remains challenging. Many in vivo techniques are available to investigate the impact of GI physiology on oral drug behavior in fasting state conditions. However, little is known about the intraluminal behavior of a drug in postprandial conditions. In a previous report, we described the mean solution and total concentrations of ibuprofen after oral administration of an immediate-release (IR) tablet in fed state conditions. In parallel, blood samples were taken to assess systemic concentrations. The purpose of this work was to statistically evaluate the impact of GI physiology (e.g., pH, contractile events) within and between individuals (intra and intersubject variability) for a total of 17 healthy subjects. In addition, a pharmacokinetic (PK) analysis was performed by noncompartmental analysis, and PK parameters were correlated with underlying physiological factors (pH, time to phase III contractions postdose) and study parameters (e.g., ingested amount of calories, coadministered water). Moreover, individual plasma profiles were deconvoluted to assess the fraction absorbed as a function of time, demonstrating the link between intraluminal and systemic behavior of the drug. The results demonstrated that the in vivo dissolution of ibuprofen depends on the present gastric pH and motility events at the time of administration. Both intraluminal factors were responsible for explaining 63% of plasma Cmax variability among all individuals. For the first time, an in-depth analysis was performed on a large data set derived from an aspiration/motility study, quantifying the impact of physiology on systemic behavior of an orally administered drug product in fed state conditions. The data obtained from this study will help us to develop an in vitro biorelevant dissolution approach and optimize in silico tools in order to predict the in vivo performance of orally administered drug products, especially in fed state conditions.

Application of a Refined Developability Classification System

In 2010, the Developability Classification System was proposed as an extension of the Biopharmaceutics Classification System to align the classification system with the need for early evaluation of drug candidates according to their developability as oral formulations. Recent work on the Developability Classification System has resulted in the refined developability classification system (rDCS), consisting of standard investigations to estimate drug candidate solubility and permeability and offering customized investigations that are triggered when there is a potential for supersaturation/precipitation (e.g., salts of acids, weak bases) or to investigate permeation versus dissolution-limited absorption. In the present study, the rDCS concept was successfully applied to 6 marketed compounds (aciclovir, albendazole, danazol, dantrolene, dipyridamole, and piroxicam), for which there is a rich database of information. Furthermore, the rDCS was applied to 20 pipeline compounds from past and current research projects at Bayer AG. The rDCS was able to predict the results in humans correctly in 80% of cases. Overall, the results suggest that the rDCS is a highly useful tool for estimating the in vivo behavior of new drug candidates.

Food for thought: formulating away the food effect - a PEARRL review

OBJECTIVES

Co-ingestion of oral dosage forms with meals can cause substantial changes in bioavailability relative to the fasted state. Food-mediated effects on bioavailability can have significant consequences in drug development, regulatory and clinical settings. To date, the primary focus of research has focused on the ability to mechanistically understand the causes and predict the occurrence of these effects.

KEY FINDINGS

The current review describes the mechanisms underpinning the occurrence of food effects, sheds new insights on the relative frequency for newly licensed medicines and describes the various methods by which they can be overcome. Analysis of oral medicines licensed by either the EMA or FDA since 2010 revealed that over 40% display significant food effects. Due to altered bioavailability, these medicines are often required to be dosed, rather restrictively, in either the fed or the fasted state, which can hinder clinical usefulness.

SUMMARY

There are clinical and commercial advantages to predicting the presence of food effects early in the drug development process, in order to mitigate this risk of variable food effect bioavailability. Formulation approaches aimed at reducing variable food-dependent bioavailability, through the use of bio-enabling formulations, are an essential tool in addressing this challenge and the latest state of the art in this field are summarised here.

Rapid Recovery of Clofazimine-Loaded Nanoparticles with Long-Term Storage Stability as Anti-Cryptosporidium Therapy

While the formulation of nanoparticle (NP) suspensions has been widely applied in materials and life science, the recovery of NPs from such a suspension into a solid state is practically important to confer long-term storage stability. However, solidification, while preserving the original nanoscale properties, remains a formidable challenge in the pharmaceutical and biomedical applications of NPs. Herein we combined flash nanoprecipitation (FNP) and spray-drying as a nanofabrication platform for NP formulation and recovery without compromising the dissolution kinetics of the active ingredient. Clofazimine was chosen to be the representative drug, which has been recently repurposed as a potential treatment for cryptosporidiosis. Clofazimine was encapsulated in NPs with low-cost surface coatings, hypromellose acetate succinate (HPMCAS) and lecithin, which were required by the ultimate application to global health. Spray-drying and lyophilization were utilized to produce dried powders with good long-term storage stability for application in hot and humid climatic zones. The particle morphology, yield efficiency, drug loading, and clofazimine crystallinity in the spray-dried powders were characterized. The in vitro release kinetics of spray-dried NP powders were compared to analogous dissolution profiles from standard lyophilized NP samples, crystalline clofazimine powder, and the commercially available formulation Lamprene. The spray-dried powders showed a supersaturation level of up to 60 times the equilibrium solubility and remarkably improved dissolution rates. In addition, the spray-dried powders with both surface coatings showed excellent stability during aging studies with elevated temperature and humidity, in view of the dissolution and release in vitro. Considering oral delivery for pediatric administration, the spray-dried powders show less staining effects with simulated skin than crystalline clofazimine and may be made into minitablets without additional excipients. These results highlight the potential of combining FNP and spray-drying as a feasible and versatile platform to design and rapidly recover amorphous NPs in a solid dosage form, with the advantages of satisfactory long-term storage stability, low cost, and easy scalability.

Statistical investigation of the full concentration range of fasted and fed simulated intestinal fluid on the equilibrium solubility of oral drugs

Upon oral administration the solubility of a drug in intestinal fluid is a key property influencing bioavailability. It is also recognised that simple aqueous solubility does not reflect intestinal solubility and to optimise in vitro investigations simulated intestinal media systems have been developed. Simulated intestinal media which can mimic either the fasted or fed state consists of multiple components each of which either singly or in combination may influence drug solubility, a property that can be investigated by a statistical design of experiment technique. In this study a design of experiment covering the full range from the lower limit of fasted to the upper limit of fed parameters and using a small number of experiments has been performed. The measured equilibrium solubility values are comparable with literature values for simulated fasted and fed intestinal fluids as well as human fasted and fed intestinal fluids. The equilibrium solubility data range is statistically equivalent to a combination of published fasted and fed design of experiment data in six (indomethacin, phenytoin, zafirlukast, carvedilol, fenofibrate and probucol) drugs with three (aprepitant, tadalafil and felodipine) drugs not equivalent. In addition the measured equilibrium solubility data sets were not normally distributed. Further studies will be required to determine the reasons for these results however it implies that a single solubility measurement without knowledge of the solubility distribution will be of limited value. The statistically significant media factors which promote equilibrium solubility (pH, sodium oleate and bile salt) were in agreement with published results but the number of determined significant factors and factor interactions was fewer in this study, lecithin for example did not influence solubility. This may be due to the reduction in statistical sensitivity from the lower number of experimental data points or the fact that using the full range will examine media parameters ratios that are not biorelevant. Overall the approach will provide an estimate of the solubility range and the most important media factors but will not be equivalent to larger scale focussed studies. Further investigations will be required to determine why some drugs do not produce equivalent DoE solubility distributions, for example combined fasted and fed DoE, but this simply may be due to the complexity and individuality of the interactions between a drug and the media components.

Variation in Supersaturation and Phase Behavior of Ezetimibe Amorphous Solid Dispersions upon Dissolution in Different Biorelevant Media

The delivery of poorly water-soluble drugs using amorphous solid dispersions (ASDs) has been widely acknowledged as a promising strategy for enhancing oral bioavailability. Upon dissolution, ASDs have accelerated dissolution rates and yield supersaturated solutions leading to higher apparent solubilities. Understanding the complex phase behavior of ASDs during dissolution is crucial for developing an effective formulation. Since the absorption of a lipophilic, high permeability drug is determined primarily by the intraluminal dissolution process and the final concentration achieved, there is a need for evaluation in biorelevant dissolution media that simulate both fasting and fed gastrointestinal states. In this study, using ezetimibe as a model drug, three different ASDs were prepared using poly(acrylic acid) (PAA), polyvinylpyrrolidone (PVP), and hydroxypropyl methylcellulose acetyl succinate (HPMC-AS). Dissolution of ASDs was carried out in sodium phosphate buffer, fed-state simulated intestinal fluid (FeSSIF), and Ensure Plus to evaluate the impact of different dissolution media on release profile, supersaturation, and phase behavior. The supersaturation level and crystallization kinetics varied among the dispersions and were found to be highly dependent on the medium employed. The presence of solubilizing additives in biorelevant media greatly affected the generation and stabilization of supersaturated solutions. Second harmonic generation microscopy was found to enable the detection of crystals in all media including the highly turbid Ensure Plus system. In conclusion, it is important to evaluate the impact of complex biorelevant media on the dissolution performance of ASDs to better design supersaturating formulations for oral delivery.

Dual Level Statistical Investigation of Equilibrium Solubility in Simulated Fasted and Fed Intestinal Fluid

The oral route is the preferred option for drug administration but contains the inherent issue of drug absorption from the gastro-intestinal tract (GIT) in order to elicit systemic activity. A prerequisite for absorption is drug dissolution, which is dependent upon drug solubility in the variable milieu of GIT fluid, with poorly soluble drugs presenting a formulation and biopharmaceutical challenge. Multiple factors within GIT fluid influence solubility ranging from pH to the concentration and ratio of amphiphilic substances, such as phospholipid, bile salt, monoglyceride, and cholesterol. To aid in vitro investigation simulated intestinal fluids (SIF) covering the fasted and fed state have been developed. SIF media is complex and statistical design of experiment (DoE) investigations have revealed the range of solubility values possible within each state due to physiological variability along with the media factors and factor interactions which influence solubility. However, these studies require large numbers of experiments (>60) and are not feasible or sensible within a drug development setting. In the current study a smaller dual level, reduced experimental number (20) DoE providing three arms covering the fasted and fed states along with a combined analysis has been investigated. The results indicate that this small scale investigation is feasible and provides solubility ranges that encompass published data in human and simulated fasted and fed fluids. The measured fasted and fed solubility ranges are in agreement with published large scale DoE results in around half of the cases, with the differences due to changes in media composition between studies. Indicating that drug specific behaviors are being determined and that careful media factor and concentration level selection is required in order to determine a physiologically relevant solubility range. The study also correctly identifies the major single factor or factors which influence solubility but it is evident that lower significance factors (for example bile salt) are not picked up due to the lower sample number employed. A similar issue is present with factor interactions with only a limited number available for study and generally not determined to have a significant solubility impact due to the lower statistical power of the study. The study indicates that a reduced experimental number DoE is feasible, will provide solubility range results with identification of major solubility factors however statistical limitations restrict the analysis. The approach therefore represents a useful initial screening tool that can guide further in depth analysis of a drug's behavior in gastrointestinal fluids.

Influence of Physiological Gastrointestinal Surfactant Ratio on the Equilibrium Solubility of BCS Class II Drugs Investigated Using a Four Component Mixture Design

The absorption of poorly water-soluble drugs is influenced by the luminal gastrointestinal fluid content and composition, which control solubility. Simulated intestinal fluids have been introduced into dissolution testing including endogenous amphiphiles and digested lipids at physiological levels; however, in vivo individual variation exists in the concentrations of these components, which will alter drug absorption through an effect on solubility. The use of a factorial design of experiment and varying media by introducing different levels of bile, lecithin, and digested lipids has been previously reported, but here we investigate the solubility variation of poorly soluble drugs through more complex biorelevant amphiphile interactions. A four-component mixture design was conducted to understand the solubilization capacity and interactions of bile salt, lecithin, oleate, and monoglyceride with a constant total concentration (11.7 mM) but varying molar ratios. The equilibrium solubility of seven low solubility acidic (zafirlukast), basic (aprepitant, carvedilol), and neutral (fenofibrate, felodipine, griseofulvin, and spironolactone) drugs was investigated. Solubility results are comparable with literature values and also our own previously published design of experiment studies. Results indicate that solubilization is not a sum accumulation of individual amphiphile concentrations, but a drug specific effect through interactions of mixed amphiphile compositions with the drug. This is probably due to a combined interaction of drug characteristics; for example, lipophilicity, molecular shape, and ionization with amphiphile components, which can generate specific drug-micelle affinities. The proportion of each component can have a remarkable influence on solubility with, in some cases, the highest and lowest points close to each other. A single-point solubility measurement in a fixed composition simulated media or human intestinal fluid sample will therefore provide a value without knowledge of the surrounding solubility topography meaning that variability may be overlooked. This study has demonstrated how the amphiphile ratios influence drug solubility and highlights the importance of the envelope of physiological variation when simulating in vivo drug behavior.

Characterization of Solubilizing Nanoaggregates Present in Different Versions of Simulated Intestinal Fluid

The absorption of hydrophobic drugs and nutrients from the intestine is principally determined by the amount that can be dissolved by the endogenous fluids present in the gut. Human intestinal fluids (HIFs) comprise a complex mixture of bile salts, phospholipids, steroids and glycerides that vary in composition in the fed and fasted state and between subjects. A number of simulated intestinal fluid (SIF) compositions have been developed to mimic fasted and fed state intestinal conditions and allow the in vitro determination of drug solubility as a proxy for the maximum dissolved concentration it is possible to reach. In particular these solvents are used during the development of lipophilic and poorly water-soluble drugs but questions remain around the differences that may arise from the source and methods of preparation of these fluids. In this work, a range of SIFs were studied using small-angle X-ray scattering (SAXS), cryogenic-transmission electron microscopy (cryo-TEM) and molecular dynamics (MD) simulations in order to analyze their structures. In-house prepared SIFs based on sodium taurodeoxycholate (NaTDC) and 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine (DOPC) formed oblate ellipsoidal micelles irrespective of lipid concentration and preparation conditions. In contrast, commercially available SIFs based on sodium taurocholate and lecithin formed prolate ellipsoidal micelles in the fed state and vesicles in the fasted state. These structural variations are the likely reason for the dramatic differences sometimes observed in the solubility enhancements for hydrophobic drugs, nutrients and digestion products when using different SIFs. However, the structural homogeneity of the NaTDC/DOPC micelles makes them ideal candidates for standardizing SIF formulations as the structures of the solubilizing nanoaggregates therein are not sensitive to the preparation method.

Evaluation of Organogel Nanoparticles as Drug Delivery System for Lipophilic Compounds

The purpose of the study was to evaluate organogel nanoparticles as a drug delivery system by investigating their stability, according to the formulation strategy, and their release profile. The gelled nanoparticles were prepared by hot emulsification (above the gelation temperature) of an organogel in water, and cooling at room temperature. In the first step, we used DLS and DSC to select the most suitable formulations by optimizing the proportion of ingredients (HSA, PVA, castor oil) to obtain particles of the smallest size and greatest stability. Then, two lipophilic drug models, indomethacin and ketoconazole were entrapped in the nanoparticles made of castor oil gelled by 12-hydroxystearic acid. Thermal studies (DSC) confirmed that there was no significant alteration of gelling due to the entrapped drugs, even at 3% w/w. Very stable dispersions were obtained (>3 months), with gelled oil nanoparticles presenting a mean diameter between 250 and 300 nm. High encapsulation efficiency (>98%) was measured for indomethacin and ketoconazole. The release profile determined by in vitro dialysis showed an immediate release of the drug from the organogel nanoparticles, due to rapid diffusion. The study demonstrates the interest of these gelled oil nanoparticles for the encapsulation and the delivery of lipophilic active compounds.

Statistical investigation of simulated fed intestinal media composition on the equilibrium solubility of oral drugs

Gastrointestinal fluid is a complex milieu and it is recognised that gut drug solubility is different to that observed in simple aqueous buffers. Simulated gastrointestinal media have been developed covering fasted and fed states to facilitate in vitro prediction of gut solubility and product dissolution. However, the combination of bile salts, phospholipids, fatty acids and proteins in an aqueous buffered system creates multiple phases and drug solubility is therefore a complex interaction between these components, which may create unique environments for each API. The impact on solubility can be assessed through a statistical design of experiment (DoE) approach, to determine the influence and relationships between factors. In this paper DoE has been applied to fed simulated gastrointestinal media consisting of eight components (pH, bile salt, lecithin, sodium oleate, monoglyceride, buffer, salt and pancreatin) using a two level D-optimal design with forty-four duplicate measurements and four centre points. The equilibrium solubility of a range of poorly soluble acidic (indomethacin, ibuprofen, phenytoin, valsartan, zafirlukast), basic (aprepitant, carvedilol, tadalafil, bromocriptine) and neutral (fenofibrate, felodipine, probucol, itraconazole) drugs was investigated. Results indicate that the DoE provides equilibrium solubility values that are comparable to literature results for other simulated fed gastrointestinal media systems or human intestinal fluid samples. For acidic drugs the influence of pH predominates but other significant factors related to oleate and bile salt or interactions between them are present. For basic drugs pH, oleate and bile salt have equal significance along with interactions between pH and oleate and lecithin and oleate. Neutral drugs show diverse effects of the media components particularly with regard to oleate, bile salt, pH and lecithin but the presence of monoglyceride, pancreatin and buffer have significant but smaller effects on solubility. There are fourteen significant interactions between factors mainly related to the surfactant components and pH, indicating that the solubility of neutral drugs in fed simulated media is complex. The results also indicate that the equilibrium solubility of each drug can exhibit individualistic behaviour associated with the drug's chemical structure, physicochemical properties and interaction with media components. The utility of DoE for fed simulated media has been demonstrated providing equilibrium solubility values comparable with similar in vitro systems whilst also providing greater information on the influence of media factors and their interactions. The determination of a drug's gastrointestinal solubility envelope provides useful limits that can potentially be applied to in silico modelling and in vivo experiments.

Computational Models of the Gastrointestinal Environment. 2. Phase Behavior and Drug Solubilization Capacity of a Type I Lipid-Based Drug Formulation after Digestion

Lipid-based drug formulations can greatly enhance the bioavailability of poorly water-soluble drugs. Following the oral administration of formulations containing tri- or diglycerides, the digestive processes occurring within the gastrointestinal (GI) tract hydrolyze the glycerides to mixtures of free fatty acids and monoglycerides that are, in turn, solubilized by bile. The behavior of drugs within the resulting colloidal mixtures is currently not well characterized. This work presents matched in vitro experimental and molecular dynamics (MD) theoretical models of the GI microenvironment containing a digested triglyceride-based (Type I) drug formulation. Both the experimental and theoretical models consist of molecular species representing bile (glycodeoxycholic acid), digested triglyceride (1:2 glyceryl-1-monooleate and oleic acid), and water. We have characterized the phase behavior of the physical system using nephelometry, dynamic light scattering, and polarizing light microscopy and compared these measurements to phase behavior observed in multiple MD simulations. Using this model microenvironment, we have investigated the dissolution of the poorly water-soluble drug danazol experimentally using LC-MS and theoretically by MD simulation. The results show how the formulation lipids alter the environment of the GI tract and improve the solubility of danazol. The MD simulations successfully reproduce the experimental results showing the utility of MD in modeling the fate of drugs after digestion of lipid-based formulations within the intestinal lumen.