Towards a more desirable dry powder inhaler formulation: large spray-dried mannitol microspheres outperform small microspheres

Engineering Inhalable Therapeutic Particles: Conventional and Emerging Approaches

Respirable particles are integral to effective inhalable therapeutic ingredient delivery, demanding precise engineering for optimal lung deposition and therapeutic efficacy. This review describes different physicochemical properties and their role in determining the aerodynamic performance and therapeutic efficacy of dry powder formulations. Furthermore, advances in top-down and bottom-up techniques in particle preparation, highlighting their roles in tailoring particle properties and optimizing therapeutic outcomes, are also presented. Practices adopted for particle engineering during the past 100 years indicate a significant transition in research and commercial interest in the strategies used, with several innovative concepts coming into play in the past decade. Accordingly, this article highlights futuristic particle engineering approaches such as electrospraying, inkjet printing, thin film freeze drying, and supercritical processes, including their prospects and associated challenges. With such technologies, it is possible to reshape inhaled therapeutic ingredient delivery, optimizing therapeutic benefits and improving the quality of life for patients with respiratory diseases and beyond.

Evaluating dry powder inhalers: From in vitro studies to mobile health technologies

Dry powder inhalers (DPIs) are essential in treating patients with pulmonary diseases. Since DPIs were introduced in the 1960s, a remarkable improvement has been made in their technology, dose delivery, efficiency, reproducibility, stability, and performance based on safety and efficacy. While there are many DPIs on the market and several more under development, it is vital to evaluate the performance of DPIs for effective aerosol drug delivery to patients with respiratory disorders. Their performance evaluation includes particle size, metering system, device design, dose preparation, inhalation technique, and patient-device integration. The purpose of this paper is to review current literature evaluating DPIs through in vitro studies, computational fluid models, and in vivo/clinical studies. We will also explain how mobile health applications are used to monitor and evaluate patients' adherence to prescribed medications.

Pulmonary delivery of spray-dried Nisin ZP antimicrobial peptide for non-small cell lung cancer (NSCLC) treatment

Nisin ZP is an antimicrobial peptide (AMP) produced by the bacterium Lactococcus lactis, and we have previously demonstrated anticancer activity in NSCLC (A549) cells. In this study, we formulated a nisin ZP dry powder (NZSD) using a spray dryer to facilitate inhaled delivery for the treatment of NSCLC. Nisin ZP was spray-dried with mannitol, l-leucine, and trehalose in a ratio of 75:15:10 using Büchi mini spray-dryer B-290 in different drug loadings (10, 20, and 30% w/w). NZSD powder revealed a good powder yield of >55% w/w with ≤3 % w/w moisture content and high nisin ZP drug loading for all the peptide ratios. The NZSD powder particles were irregularly shaped with corrugated morphology. The presence of an endothermic peak in DSC thermograms and attenuated crystalline peaks in PXRD diffractograms confirmed the semi-crystalline powder nature of NZSD. The anticancer activity of nisin ZP was maintained after fabricating it into NZSD powder and showed a similar inhibitory concentration to free nisin ZP. Stability studies indicated that NZSD powders were stable for three months at 4 and 25 ℃ with more than 90% drug content and semi-crystalline nature, as confirmed by DSC and PXRD. Aerosolization studies performed using NGI indicated an aerodynamic diameter (MMAD) within the desired range (1-5 µm) and a high fine particle fraction (FPF > 75%) for all peptide ratios, suggesting powder deposition in the lung's respiratory airways. In conclusion, a dry powder of nisin ZP was formulated using a spray dryer with enhanced storage stability and suitable for inhaled delivery.

Nanoparticle-containing lyophilized dry powder inhaler formulations optimized using central composite design with improved aerodynamic parameters and redispersibility

Objectives: The aim of this study was to improve the aerodynamic behavior and redispersibility of a lyophilized dry powder inhaler (DPI) formulation containing nanoparticles.Methods: Paclitaxel (PTX)-human serum albumin (HSA) nanoparticles were used as a model, and DPIs containing the nanoparticles were produced by lyophilization using different carriers and carrier ratios. A central composite design was employed to optimize the formulation. L-leucine and mannitol were chosen as independent variables, and mass median aerodynamic diameter (MMAD), emitted fraction, fine particle fraction (FPF), nanoparticle size, polydispersity index (PDI), zeta potential were selected as dependent variables.Results: The water content of DPIs was less than 5% for all DPIs. The cytotoxicity of the DPIs, determined using A549 cells, was due to PTX alone. Particle sizes of 204.3 ± 1.65 nm and 94.3-1353.0 nm were obtained before and after lyophilization, respectively. The developed method resulted in a reduction in the MMAD from 8.148 µm to 5.274 µm, an increase in the FPF from 17.63% to 33.60%, and an increase in the emitted fraction from 77.68% to 97.03%. The physico-chemical characteristics of the optimized formulation were also assessed.Conclusions: In conclusion, this study demonstrates that lyophilization can be used to produce nanoparticle-containing DPI formulations with improved redispersibility and aerodynamic properties.

A Critical Review on Engineering of d-Mannitol Crystals: Properties, Applications, and Polymorphic Control

d-mannitol is a common six-carbon sugar alcohol, which is widely used in food, chemical, pharmaceutical, and other industries. Polymorphism is defined as the ability of materials to crystallize into different crystal structures. It has been reported for a long time that d-mannitol has three polymorphs: β, δ, and α. These different polymorphs have unique physicochemical properties, thus affecting the industrial applications of d-mannitol. In this review, we firstly introduced the characteristics of different d-mannitol polymorphs, e.g., crystal structure, morphology, molecular conformational energy, stability, solubility and the analytical techniques of d-mannitol polymorphisms. Then, we described the different strategies for the preparation of d-mannitol crystals and focused on the polymorphic control of d-mannitol crystals in the products. Furthermore, the factors of the formation of different d-mannitol polymorphisms were summarized. Finally, the application of mannitol polymorphism was summarized. The purpose of this paper is to provide new ideas for a more personalized design of d-mannitol for various applications, especially as a pharmaceutical excipient. Meanwhile, the theoretical overview on polymorphic transformation of d-mannitol may shed some light on the crystal design study of other polycrystalline materials.

State-of-the-Art Review of The Application and Development of Various Methods of Aerosol Therapy

Aerosol therapy is a rapidly developing field of science. Due to a number of advantages, the administration of drugs to the body with the use of aerosol therapy is becoming more and more popular. Spraying drugs into the patient's lungs has a significant advantage over other methods of administering drugs to the body, including injection and oral methods. In order to conduct proper and effective aerosol therapy, it is necessary to become familiar with the basic principles and applications of aerosol therapy under various conditions. The effectiveness of inhalation depends on many factors, but most of all on: the physicochemical properties of the sprayed system, the design of the medical inhaler and its correct application, the dynamics of inhalation (i.e. the frequency of breathing and the volume of inhaled air). It is worth emphasizing that respiratory system diseases are one of the most frequently occurring and fastest growing diseases in the world. Accordingly, in recent years, a significant increase in the number of new spraying devices and pharmaceutical drugs for spraying has appeared on the market. It should also be remembered that the process of spraying a liquid is a complicated and complex process, and its efficiency is very often characterized by the use of micro- and macro parameters (including average droplet diameters or the spectrum of droplet diameter distribution). In order to determine the effectiveness of the atomization process and in the delivery of drugs to the patient's respiratory tract, the analysis of the size of the generated aerosol droplets is most often performed. Based on the proposed literature review, it has been shown that many papers dealt with the issues related to aerosol therapy, the selection of an appropriate spraying device, the possibility of modifying the spraying devices in order to increase the effectiveness of inhalation, and the possibility of occurrence of certain discrepancies resulting from the use of various measurement methods to determine the characteristics of the generated aerosol. The literature review presented in the paper was prepared in order to better understand the spraying process. Moreover, it can be helpful in choosing the right medical inhaler for a given liquid with specific rheological properties. The experimental data contained in this study are of great cognitive importance and may be of interest to entities involved in pharmaceutical product engineering (in particular in the case of the production of drugs containing liquids with complex rheological properties).

The Influence of Formulation Components and Environmental Humidity on Spray-Dried Phage Powders for Treatment of Respiratory Infections Caused by Acinetobacter baumannii

The feasibility of using respirable bacteriophage (phage) powder to treat lung infections has been demonstrated in animal models and clinical studies. This work investigated the influence of formulation compositions and excipient concentrations on the aerosol performance and storage stability of phage powder. An anti-Acinetobacter baumannii phage vB_AbaM-IME-AB406 was incorporated into dry powders consisting of trehalose, mannitol and L-leucine for the first time. The phage stability upon the spray-drying process, room temperature storage and powder dispersion under different humidity conditions were assessed. In general, powders prepared with higher mannitol content (40% of the total solids) showed a lower degree of particle merging and no sense of stickiness during sample handling. These formulations also provided better storage stability of phage with no further titer loss after 1 month and <1 log titer loss in 6 months at high excipient concentration. Mannitol improved the dispersibility of phage powders, but the in vitro lung dose dropped sharply after exposure to high-humidity condition (65% RH) for formulations with 20% mannitol. While previously collected knowledge on phage powder preparation could be largely extended to formulate A. baumannii phage into inhalable dry powders, the environmental humidity may have great impacts on the stability and dispersion of phage; therefore, specific attention is required when optimizing phage powder formulations for global distribution.

Dry Powder for Pulmonary Delivery: A Comprehensive Review

The pulmonary route has long been used for drug administration for both local and systemic treatment. It possesses several advantages, which can be categorized into physiological, i.e., large surface area, thin epithelial membrane, highly vascularized, limited enzymatic activity, and patient convenience, i.e., non-invasive, self-administration over oral and systemic routes of drug administration. However, the formulation of dry powder for pulmonary delivery is often challenging due to restrictions on aerodynamic size and the lung’s lower tolerance capacity in comparison with an oral route of drug administration. Various physicochemical properties of dry powder play a major role in the aerosolization, deposition, and clearance along the respiratory tract. To prepare suitable particles with optimal physicochemical properties for inhalation, various manufacturing methods have been established. The most frequently used industrial methods are milling and spray-drying, while several other alternative methods such as spray-freeze-drying, supercritical fluid, non-wetting templates, inkjet-printing, thin-film freezing, and hot-melt extrusion methods are also utilized. The aim of this review is to provide an overview of the respiratory tract structure, particle deposition patterns, and possible drug-clearance mechanisms from the lungs. This review also includes the physicochemical properties of dry powder, various techniques used for the preparation of dry powders, and factors affecting the clinical efficacy, as well as various challenges that need to be addressed in the future.

Targeted Pulmonary Delivery of the Green Tea Polyphenol Epigallocatechin Gallate Controls the Growth of Mycobacterium tuberculosis by Enhancing the Autophagy and Suppressing Bacterial Burden

Growing rates of tuberculosis (TB) superbugs are alarming, which has hampered the progress made to-date to control this infectious disease, and new drug candidates are few. Epigallocatechin gallate (EGCG), a major polyphenolic compound from green tea extract, shows powerful efficacy against TB bacteria in in vitro studies. However, the therapeutic efficacy of the molecule is limited due to poor pharmacokinetics and low bioavailability following oral administration. Aiming to improve the treatment outcomes of EGCG therapy, we investigated whether encapsulation and pulmonary delivery of the molecule would allow the direct targeting of the site of infection without compromising the activity. Microencapsulation of EGCG was realized by scalable spray-freeze-drying (SFD) technology, forming free-flowing micrometer-sized microspheres (epigallocatechin-3-gallate-loaded trehalose microspheres, EGCG-t-MS) of trehalose sugar. These porous microspheres exhibited appropriate aerodynamic parameters and high encapsulation efficiencies. In vitro studies demonstrated that EGCG-t-MS exhibited dose- and time-dependent killing of TB bacteria inside mouse macrophages by cellular mechanisms of lysosome acidification and autophagy induction. In a preclinical study on TB-infected Balb/c mice model (4 weeks of infection), we demonstrate that the microencapsulated EGCG, administered 5 days/week for 6 weeks by pulmonary delivery, showed exceptional efficacy compared to oral treatment of free drug. This treatment approach exhibited therapeutic outcomes by resolution of inflammation in the infected lungs and significant reduction (P < 0.05) in bacterial burden (up to ∼2.54 Log₁₀ CFU) compared to untreated control and orally treated mice groups. No pathological granulomas, lesions, and inflammation were observed in the histopathological investigation, compared to untreated controls. The encouraging results of the study may pave the avenues for future use of EGCG in TB therapeutics by targeted pulmonary delivery and lead to its translational success.

Co-spraying of carriers (mannitol-lactose) as a method to improve aerosolization performance of salbutamol sulfate dry powder inhaler

Although in dry powder inhaler (DPI) formulations a single carrier is used, a single carrier is not able to provide an excellent aerosolization performance when it is used in DPI formulations. Thereby, the aim of this study was to engineer a suitable ternary mixture of mannitol-lactose-leucine to be used in a DPI formulation with enhanced aerosolization performance. To this end, binary mixtures of mannitol:lactose containing a constant amount of leucine (5% w/w of carriers) were spray-dried as a single solution. Spray-dried samples were blended with salbutamol sulfate to determine the efficiency of their aerosolization performance. Interestingly, note that lactose was in its amorphous state stabilized by the presence of mannitol in the samples. Spray-dried mannitol without lactose showed a combination of the α- and β-polymorphic forms which was the case in all other ratios of mannitol:lactose. It was shown that the highest fine particle fraction (FPF) was 62.42 ± 4.21% which was obtained for the distinct binary mixtures (1:3 mannitol:lactose) compared to a single carrier. This study opens a new window to investigate further the implementation of binary mixtures of sugar carriers containing leucine in DPI formulations to overcome poor aerosolization performance the mentioned DPI formulations.

The effect of metal salts on aerosol performance of spray dried carrier-free formulations of levofloxacin

PURPOSE

Metal salts are used in formulation of dry powder inhalers (DPIs) for different purposes. Recently the role of these salts in production of small, dense but highly dispersible particles has emerged. In this study the effect of some such salts on dispersibility and respirability of spray dried levofloxacin formulations was evaluated in normal and reduced inhalation air flow or by increasing powder filling in capsules.

METHODS

levofloxacin was co-spray dried with different concentrations of common metal chlorides (NaCl, KCl, CaCl₂ and MgCl₂) either with or without leucine as dispersibility enhancer. Particle size, moisture, morphology, triboelectrification tendency and fine particle fraction (FPF) of resulting powders were evaluated. In addition, the effect of these salts and leucine on dispersibility of resulting powders in reduced air flow rate and increased capsule filling mass were evaluated.

RESULTS

Presence of higher tested concentrations of divalent cations increased water content, and reduced FPF significantly. Addition of leucine reduced water content and electrostatic charge, increased particle size and FPF and improved spray drying yield significantly. Lower concentrations of salts did not affect FPF of leucine containing powders significantly, but presence of 2.5% NaCl or MgCl₂ preserved the dispersibility in higher capsule fillings. A 2.5% concentration of NaCl in such formulations preserved dispersibility in lower air flows.

CONCLUSION

Higher amounts of divalent salts increases triboelectrification and moisture absorption, and reduces FPF. Lower concentrations of NaCl could not improve FPF of leucine containing formulations significantly, but preserves dispersibility in low air flows and high capsule fillings. Graphical abstract.

Agglomerated novel spray-dried lactose-leucine tailored as a carrier to enhance the aerosolization performance of salbutamol sulfate from DPI formulations

Spray-drying allows to modify the physicochemical/mechanical properties of particles along with their morphology. In the present study, _L-leucine with varying concentrations (0.1, 0.5, 1, 5, and 10% w/v) were incorporated into lactose monohydrate solution for spray-drying to enhance the aerosolization performance of dry powder inhalers containing spray-dried lactose-leucine and salbutamol sulfate. The prepared spray-dried lactose-leucine carriers were analyzed using laser diffraction (particle size), differential scanning calorimetry (thermal behavior), scanning electron microscopy (morphology), powder X-ray diffraction (crystallinity), Fourier transform infrared spectroscopy (interaction at molecular level), and in vitro aerosolization performance (deposition). The results showed that the efficacy of salbutamol sulfate’s aerosolization performance was, in part, due to the introduction of _L-leucine in the carrier, prior to being spray-dried, accounting for an increase in the fine particle fraction (FPF) of salbutamol sulfate from spray-dried lactose-leucine (0.5% leucine) in comparison to all other carriers. It was shown that all of the spray-dried carriers were spherical in their morphology with some agglomerates and contained a mixture of amorphous, α-lactose, and β-lactose. It was also interesting to note that spray-dried lactose-leucine particles were agglomerated during the spray-drying process to make coarse particles (volume mean diameter of 79 to 87 μm) suitable as a carrier in DPI formulations.

Effect of USP Induction Ports, Glass Sampling Apparatus, and Inhaler Device Resistance on Aerodynamic Patterns of Fluticasone Propionate-Loaded Engineered Mannitol Microparticles

The present investigation is to study the effect of two different induction ports (IP), i.e., USP IP and USP-modified IP equipped with andersen cascade impactor on in vitro aerodynamic performance along with the impact of USP-modified glass sampling apparatus on delivered dose uniformity of fluticasone propionate (FP) dry powder inhaler (DPI). FP DPI was fabricated by spray drying technique using engineered mannitol microparticles (EMP) with different force controlling agents, i.e., leucine and magnesium stearate. Additionally, commercially available two DPI inhaler devices namely Handihaler® and Breezhaler® were used to aerosolize the FP blends. Spherical smooth surface of EMP showed good powder flow properties and acceptable percentage content uniformity (> 95%). Amounts of FP deposited in cascade assembly using USP-modified IP with the Breezhaler® device was significantly higher (1.32-fold) as compared with the Handihaler® device. Moreover, USP-modified IP showed better deposition as compared with USP IP. Additionally, both inhaler devices showed a satisfactory delivered dose (> 105%) for FP using modified glass sampling apparatus at a flow rate of 60 L/min for 2 s. It was interesting to note that not only formulation properties but also IP geometry and device resistance have significant impact on DPI deposition pattern. This study is a first detailed account of aerodynamic performance of FP using USP-modified IP and USP-modified glass sampling apparatus. Thus, it can be of potential importance for both the academic and industry perspective.

Tribo-Charging Behaviour of Inhalable Mannitol Blends with Salbutamol Sulphate

PURPOSE

The performance of carrier-based dry powder inhaler (DPI) formulations can be critically impacted by interfacial interactions driven by tribo-electrification. Therefore, the aim of the present work was to understand how distinct API particle characteristics affect the charging behaviour of blends intended for DPI delivery.

METHODS

Salbutamol sulphate (SBS) particles engineered via spray-drying and jet milling were used as model APIs. D-mannitol was selected as a model carrier. The materials were characterized concerning their different particle properties and their charge was analysed alone and in blends before and after flow over a stainless-steel pipe.

RESULTS

The spray-dried SBS (amorphous and spherical) charged positively and to a higher extent than jet milled SBS (crystalline and acicular) that charged negatively and to a lower extent. D-mannitol charged positively and to a higher extent than the APIs. All drug-excipient blends charged negatively and differences were found between the spray-dried and jet milled SBS blends at 2% and 5% drug loads.

CONCLUSIONS

It was demonstrated how distinct solid-states, particle shape, size and morphology as well as different water contents of the different materials can affect tribo-charging. For their binary blends, the amount and nature of fines seem to govern inter-particle contacts critically impacting charge evolution.

Novel Inhalable Ciprofloxacin Dry Powders for Bronchiectasis Therapy: Mannitol-Silk Fibroin Binary Microparticles with High-Payload and Improved Aerosolized Properties

Non-cystic fibrosis bronchiectasis (NCFB) is a chronic respiratory disease associated with the high morbidity and mortality. Long-term intermittent therapy by inhalable antibiotics has recently emerged as an effective approach for NCFB treatment. However, the effective delivery of antibiotics to the lung requires administering a high dose to the site of infection. Herein, we investigated the novel inhalable silk-based microparticles as a promising approach to deliver high-payload ciprofloxacin (CIP) for NCFB therapy. Silk fibroin (SF) was applied to improve drug-payload and deposit efficiency of the dry powder particles. Mannitol was added as a mucokinetic agent. The dry powder inhaler (DPI) formulations of CIP microparticles were evaluated in vitro in terms of the aerodynamic performance, particle size distribution, drug loading, morphology, and their solid state. The optimal formulation (highest drug loading, 80%) exhibited superior aerosolization performance in terms of fine particle fraction (45.04 ± 0.84%), emitted dose (98.10 ± 1.27%), mass median aerodynamic diameter (3.75 ± 0.03 μm), and geometric standard deviation (1.66 ± 0.10). The improved drug loading was due to the electrostatic interactions between the SF and CIP by adsorption, and the superior aerosolization efficiency would be largely attributed to the fluffy and porous cotton-like property and low-density structure of SF. The presented results indicated the novel inhalable silk-based DPI microparticles of CIP could provide a promising strategy for the treatment of NCFB.

Co-Spray Dried Mannitol/Poly(amidoamine)-Doxorubicin Dry-Powder Inhaler Formulations for Lung Adenocarcinoma: Morphology, In Vitro Evaluation, and Aerodynamic Performance

nhaled chemotherapeutics have emerged as a promising regimen to combat lung cancer as they maximize local drug concentration while significantly reduce systemic exposure. However, the poor lung/systemic safety profiles and lack of clinically efficient formulations restrict the applicability of inhaled chemotherapeutics. This work developed a dry-powder inhaler (DPI) formulation that dispersed a pH-responsive poly(amidoamine) dendrimer-doxorubicin conjugate (G4-12DOX) into mannitol microparticles. The dendrimer conjugate only releases cytotoxic agents in response to intracellular pH drop, leading to reduced systemic and local toxicity. This work investigated the effect of G4-12DOX content on the microparticle size and morphology, redispersibility, in vitro cytotoxicity, and aerosol properties of the formulations. The spray-dried G4-12DOX/mannitol microparticles showed smooth and spherical morphology with 1-4 μm in diameter. As the content of the G4-12DOX conjugate in the microparticles increased, the size, and degree of aggregation of microparticles increased dramatically. The G4-12DOX/mannitol microparticles were readily redispersed in the aqueous environment, reverting to nanoscale dendrimer conjugates to escape alveolar phagocytosis. All DPI formulations demonstrated the similar cytotoxicity as the original conjugate against a lung adenocarcinoma cell line. The emitted dose (ED) and fine particle fraction (FPF) of the DPI formulations decreased as the content of G4-12DOX increased, but EDs and FPFs of all formulations fell within the range of 85-60% and 60-40%, which were higher than those of commercial products (EDs = 40-60%; FPFs = 12-40%). Therefore, the spray-dried dendrimer/mannitol microparticle is an efficient and practical DPI formulation for direct delivery of large dose of chemotherapeutics to lung tumors.

Imagine the Superiority of Dry Powder Inhalers from Carrier Engineering

Inhalation therapy has strong history of more than 4000 years and it is well recognized around the globe within every culture. In early days, inhalation therapy was designed for treatment of local disorders such as asthma and other pulmonary diseases. Almost all inhalation products composed a simple formulation of a carrier, usually α-lactose monohydrate orderly mixed with micronized therapeutic agent. Most of these formulations lacked satisfactory pulmonary deposition and dispersion. Thus, various alternative carrier's molecules and powder processing techniques are increasingly investigated to achieve suitable aerodynamic performance. In view of this fact, more suitable and economic alternative carrier's molecules with advanced formulation strategies are discussed in the present review. Furthermore, major advances, challenges, and the future perspective are discussed.

On the effects of blending, physicochemical properties, and their interactions on the performance of carrier-based dry powders for inhalation - A review

Blending drug and carrier powders to produce homogeneous drug-carrier adhesive mixtures is a key step in the production of dry powder inhaler (DPI) formulations. Although the blending conditions can result in different conclusions or probably change the outcome of a study entirely if being selected differently, there is a scarcity of data on the influence of blending processes on the physicochemical properties of bulk powder formulations and the follow-on effects on DPI performance. This paper provides an overview of the interactions between variables related to blending conditions (e.g. blending equipment, time, speed and sequence as well as environmental humidity) and powder physicochemical properties (e.g. size distribution, shape distribution, density, anomeric composition, electrostatic charge, surface, and bulk properties), and their effects on the performance of adhesive mixtures for inhalation in terms of drug content homogeneity, drug-carrier adhesion, and drug aerosolisation behaviour. The relevance of carrier payload, batch size and segregation was also discussed. Challenges and future directions were identified. This review therefore contributes towards a better understanding of the blending process, powder physicochemical properties, and their interlinked effects on the fundamental understanding of adhesive mixtures for inhalation. The knowledge gained is essential to ensure optimum blending and thereby controlled functionality of DPIs.

Influence of physical properties of carrier on the performance of dry powder inhalers

Dry powder inhalers (DPIs) offer distinct advantages as a means of pulmonary drug delivery and have attracted much attention in the field of pharmaceutical science. DPIs commonly contain micronized drug particles which, because of their cohesiveness and strong propensity to aggregate, have poor aerosolization performance. Thus carriers with a larger particle size are added to address this problem. However, the performance of DPIs is profoundly influenced by the physical properties of the carrier, particularly their particle size, morphology/shape and surface roughness. Because these factors are interdependent, it is difficult to completely understand how they individually influence DPI performance. The purpose of this review is to summarize and illuminate how these factors affect drug–carrier interaction and influence the performance of DPIs.

Feasibility of highly branched cyclic dextrin as an excipient matrix in dry powder inhalers

We investigated the feasibility of highly branched cyclic dextrin (HBCD) as an excipient matrix in dry powder inhalers (DPIs). The fine particles of HBCD and HBCD/active pharmaceutical ingredients (APIs) were prepared by spray-drying an ethanol-aqueous solution containing HBCD. The particle size of spray-dried HBCD itself was approximately 3.0μm with a wrinkled shape. Solid-state fluorescence emission spectroscopy of 1-naphthoic acid (1-NPA) showed that it was dispersed in a molecular dispersion/solid solution, if the model compound of 1-NPA was spray-dried with HBCD. Powder X-ray diffraction and differential scanning calorimetry indicate that 1-NPA was in the amorphous state after spray-drying with HBCD, which is confirmed by the fluorescence measurements, 1-NPA could be incorporated into HBCD. When the antimycobacterial agent, rifampicin, was spray-dried with HBCD for the purpose of pulmonary administration, the emitted dose and fine-particle fraction of the spray-dried particles of rifampicin with HBCD were 95.7±1.7% and 39.5±5.7%, respectively. The results indicated that HBCD possessed a high potential as an excipient in DPIs, not only by molecular association of API molecules with HBCD, but also by that of API fine crystals.

Functionalised particles using dry powder coating in pharmaceutical drug delivery: promises and challenges

INTRODUCTION

Production of functionalised particles using dry powder coating is a one-step, environmentally friendly process that paves the way for the development of particles with targeted properties and diverse functionalities.

AREAS COVERED

Applying the first principles in physical science for powders, fine guest particles can be homogeneously dispersed over the surface of larger host particles to develop functionalised particles. Multiple functionalities can be modified including: flowability, dispersibility, fluidisation, homogeneity, content uniformity and dissolution profile. The current publication seeks to understand the fundamental underpinning principles and science governing dry coating process, evaluate key technologies developed to produce functionalised particles along with outlining their advantages, limitations and applications and discusses in detail the resultant functionalities and their applications.

EXPERT OPINION

Dry particle coating is a promising solvent-free manufacturing technology to produce particles with targeted functionalities. Progress within this area requires the development of continuous processing devices that can overcome challenges encountered with current technologies such as heat generation and particle attrition. Growth within this field requires extensive research to further understand the impact of process design and material properties on resultant functionalities.

Evaluation of granulated lactose as a carrier for DPI formulations 1: effect of granule size

The objective of this study was to investigate the effect of large granulated lactose carrier particle systems on aerosol performance of dry powder inhaler formulations. Granulated lactose carriers with average sizes ranging from 200 to 1,000 μm were prepared and subsequently fractionated into separate narrow size powders. The fractionated granulated lactose (GL) samples were characterized in terms of size, specific surface area, surface roughness, morphology, density, flowability, and solid-state. The in vitro aerosolization performance was performed on the different size fractions of GL samples from a commercial inhaler device (Aerolizer®) with a model formulation (2% w/w salbutamol sulfate). The cascade impaction parameters employed were 60 or 90 L/min with standard (aperture size, 0.6 mm) or modified piercing holes (aperture size, 1.2 mm) of the inhaler loaded capsules. It was shown that the largest size fraction formulation (850-1000 μm) had a slight improvement in the fine particle fraction (FPF) compared to immediately preceding size fractions, explained by a smaller adhesive force between drug and carrier. Compared to commercial piercing holes, enlarged piercing holes generated a slight decreasing trend of FPF as the lactose powder sizes increased from 200-250 μm to 600-850 μm, perhaps due to the reduced detachment force by flow forces. The size, surface roughness, density, and flowability of lactose carrier as well as device design all contributed to the aerosol dispersion performance of granulated lactose-based adhesive mixtures. It was concluded that poorer or enhanced redispersion performance is not an inherent property to the significantly large size of granulated lactose carriers as previously contended.

Antisolvent precipitation of novel xylitol-additive crystals to engineer tablets with improved pharmaceutical performance

The purpose of this work was to develop stable xylitol particles with modified physical properties, improved compactibility and enhanced pharmaceutical performance without altering polymorphic form of xylitol. Xylitol was crystallized using antisolvent crystallization technique in the presence of various hydrophilic polymer additives, i.e., polyethylene glycol (PEG), polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA) at a range of concentrations. The crystallization process did not influence the stable polymorphic form or true density of xylitol. However, botryoidal-shaped crystallized xylitols demonstrated different particle morphologies and lower powder bulk and tap densities in comparison to subangular-shaped commercial xylitol. Xylitol crystallized without additive and xylitol crystallized in the presence of PVP or PVA demonstrated significant improvement in hardness of directly compressed tablets; however, such improvement was observed to lesser extent for xylitol crystallized in the presence of PEG. Crystallized xylitols produced enhanced dissolution profiles for indomethacin in comparison to original xylitol. The influence of additive concentration on tablet hardness was dependent on the type of additive, whereas an increased concentration of all additives provided an improvement in the dissolution behavior of indomethacin. Antisolvent crystallization using judiciously selected type and concentration of additive can be a potential approach to prepare xylitol powders with promising physicomechanical and pharmaceutical properties.

Three-dimensional DEM-CFD analysis of air-flow-induced detachment of API particles from carrier particles in dry powder inhalers

Air flow and particle–particle/wall impacts are considered as two primary dispersion mechanisms for dry powder inhalers (DPIs). Hence, an understanding of these mechanisms is critical for the development of DPIs. In this study, a coupled DEM–CFD (discrete element method–computational fluid dynamics) is employed to investigate the influence of air flow on the dispersion performance of the carrier-based DPI formulations. A carrier-based agglomerate is initially formed and then dispersed in a uniformed air flow. It is found that air flow can drag API particles away from the carrier and those in the downstream air flow regions are prone to be dispersed. Furthermore, the influence of the air velocity and work of adhesion are also examined. It is shown that the dispersion number (i.e., the number of API particles detached from the carrier) increases with increasing air velocity, and decreases with increasing the work of adhesion, indicating that the DPI performance is controlled by the balance of the removal and adhesive forces. It is also shown that the cumulative Weibull distribution function can be used to describe the DPI performance, which is governed by the ratio of the fluid drag force to the pull-off force.