Antibacterial and photocatalytic properties of Cu2O/ZnO composite film synthesized by electrodeposition

Electrodeposited Zinc Coatings for Biomedical Application: Morphology, Corrosion and Biological Behaviour

The improvement of biodegradable metals is currently an active and promising research area for their capabilities in implant manufacturing. However, controlling their degradation rate once their surface is in contact with the physiological media is a challenge. Surface treatments are in the way of addressing the improvement of this control. Zinc is a biocompatible metal present in the human body as well as a metal widely used in coatings to prevent corrosion, due to its well-known metal protective action. These two outstanding characteristics make zinc coating worthy of consideration to improve the degradation behaviour of implants. Electrodeposition is one of the most practical and common technologies to create protective zinc coatings on metals. This article aims to review the effect of the different parameters involved in the electrochemical process on the topography and corrosion characteristics of the zinc coating. However, certainly, it also provides an actual and comprehensive description of the state-of-the-art of the use of electrodeposited zinc for biomedical applications, focusing on their capacity to protect against bacterial colonization and to allow cell adhesion and proliferation.

The mechanism of metal-based antibacterial materials and the progress of food packaging applications: A review

Food packages have been detected carrying novel coronavirus in multi-locations since the outbreak of COVID-19, causing major concern in the field of food safety. Metal-based supported materials are widely used for sterilization due to their excellent antibacterial properties as well as low biological resistance. As the principal part of antibacterial materials, the active component, commonly referred to Ag, Cu, Zn, etc., plays the main role in inhibiting and killing pathogenic microorganisms by destroying the structure of cells. As another composition of metal-based antibacterial materials, the carrier could support and disperse the active component, which on one hand, could effectively decrease the usage amount of active component, on the other hand, could be processed into various forms to broaden the application range of antibacterial materials. Different from other metal-based antibacterial reviews, in order to highlight the detailed function of various carriers, we divided the carriers into biocompatible and adsorptable types and discussed their different antibacterial effects. Moreover, a novel substitution antibacterial mechanism was proposed. The coating and shaping techniques of metal-based antibacterial materials as well as their applications in food storage at ambient and low temperatures are also comprehensively summarized. This review aims to provide a theoretical basis and reference for researchers in this field to develop new metal-based antibacterial materials.

Synthesis and characterization of CuxO/Bi2O3 oxides for removal of HCHO under visible light irradiation

Cu_xO/Bi₂O₃ oxides grown on nickel foam were synthesized via an electrodeposition method to degrade indoor HCHO under visible light irradiation and fully characterized by XRD, SEM, FT-IR, and UV-Vis technologies. The characterization results showed that the Cu_xO/Bi₂O₃ oxides were successfully loaded on nickel foam and the visible light response spectrum was expanded to 740 nm. Plackett-Burman design combined with central composite design has been used to optimize factors that affect HCHO removal performance. The results demonstrated that bismuth nitrate content, polyethylene glycol 600 content, sintering time, and lactic acid concentration were the four most important factors affecting the HCHO removal performance over Cu_xO/Bi₂O₃ sample. The optimum Cu_xO/Bi₂O₃ sample could degrade 88.796% of HCHO in 300 min at the conditions of 4.28 mol/L lactic acid, 4.86% polyethylene glycol 600, 194.03 min sintering time, and 45.83 g bismuth nitrate, and the HCHO removal rate remained 82.3% after five cycles. A plausible mechanism for the degradation of HCHO under visible light irradiation was proposed. This work provides a feasible solution for removing indoor formaldehyde in the field of photocatalysis.

Electrophoretic deposition: a versatile tool against biomaterial associated infections

Biomaterial-associated infections (BAIs) are today considered as one of the most withering complications of orthopedic implant surgery. Even though BAIs occur relatively infrequently in primary joint replacement surgeries (incidence rates around 1-2%), revision arthroplasties carry up to 40% risk of infection recurrence, with devastating consequences for the patient and significant associated cost. Once the responsible pathogens, mainly bacteria, attach to the surface of the biomaterial, they start creating layers of extracellular matrix with complex architectures, called biofilms. These last mentioned, encapsulate and protect bacteria by hindering the immune response and impeding antibiotics from reaching the pathogens. To prevent such an outcome, the surface of the biomaterials, in particular implants, can be modified in order to play the role of inherent drug delivery devices or as substrates for antibacterial/multifunctional coating deposition. This paper presents an overview of novel electrochemically-triggered deposition strategies, with a focus on electrophoretic deposition (EPD), a versatile and cost-effective technique for organic and inorganic material deposition. Other than being a simple deposition tool, EPD has been recently employed to create novel micro/nanostructured surfaces for multi-purpose antibacterial approaches, presented in detail in this review. In addition, a thorough comparison and assessment of the latest antibacterial and multifunctional compounds deposited by means of EPD have been reported, followed by a critical reflection on current and future prospects of the topic. The relative simplicity of EPD's application, has, by some means, undermined the fundamental requirement of rationality of multifunctional coating design. The demanding practical needs for a successful clinical translation in the growing fields of tissue engineering and antibacterial/multifunctional implant coatings, calls for a more systematic in vitro experimental design rationale, in order to make amends for the scarcity of significant in vivo and clinical studies.

A review on fabricating heterostructures from layered double hydroxides for enhanced photocatalytic activities

LDH is a controllable 2D material for fabricating heterostructures with another semiconductor.