Development of g-C3N4-TiO2 visible active hybrid photocatalyst for the photodegradation of methyl orange

An Efficient p-n Heterojunction Copper Tin Sulfide/g-C3N4 Nanocomposite for Methyl Orange Photodegradation

The discharge of toxic dye effluents from industry is a major concern for environmental pollution and toxicity. These toxic dyes can be efficiently removed from waste streams using a photocatalysis process involving visible light. Due to its simple synthesis procedure, inexpensive precursor, and robust stability, graphitic carbon nitride (g-C3N4, or CN) has been used as a visible light responsive catalyst for the degradation of dyes with mediocre performance because it is limited by its low visible light harvesting capability due to its wide bandgap and fast carrier recombination rate. To overcome these limitations and enhance the performance of g-C3N4, it was coupled with a narrow bandgap copper tin sulfide (CTS) semiconductor to form a p-n heterojunction. CTS and g-C3N4 were selected due to their good stability, low toxicity, ease of synthesis, layered sheet/plate-like morphology, and relatively abundant precursors. Accordingly, a series of copper tin sulfide/graphitic carbon nitride nanocomposites (CTS/g-C3N4) with varying CTS contents were successfully synthesized via a simple two-step process involving thermal pyrolysis and coprecipitation for visible-light-induced photocatalytic degradation of methyl orange (MO) dye. The photocatalytic activity results showed that the 50%(wt/wt) CTS/g-C3N4 composite displayed a remarkable degradation efficiency of 95.6% for MO dye under visible light illumination for 120 min, which is higher than that of either pristine CTS or g-C3N4. The improved performance is attributed to the extended light absorption range (due to the optimized bandgap), effective suppression of photoinduced electron-hole recombination, and improved charge transfer that arose from the formation of a p-n heterojunction, as evidenced by electrochemical impedance spectroscopy (EIS), photocurrent, and photoluminescence results. Moreover, the results of the reusability study showed that the composite has excellent stability, indicating its potential for the degradation of MO and other toxic organic dyes from waste streams.

Constructed a novel of Znln2S4/S-C3N4 heterogeneous catalyst for efficient photodegradation of tetracycline

Despite S-doped C3N4 can exhibit more efficient photo-reactivity than pure C3N4, there is still some space to further improve the detaching efficiency of electron-hole and enhance the photocatalytic efficiency of S-C3N4. The construction of heterojunction is an effective method to promote the photocatalytic efficiency. ZnIn2S4, as a novel photocatalyst, its VB (1.37 V) and CB (- 1.09 V) can match with S-C3N4. Therefore, we hope to construct the ZnIn2S4/S-C3N4 heterojunction for boosting the photocatalytic activity of S-C3N4. In this paper, ZnIn2S4/S-C3N4 heterojunction was prepared through hydrothermal method using S-C3N4, ZnCl2, InCl3·4H2O, and thioacetamide as raw materials and heated at 160 °C for 16 h. The optimum 18% ZnIn2S4/S-C3N4 nanocomposites exhibit dramatically enhanced photocatalytic performance for degradation of tetracycline with 86.3% removal rate within 120 min, higher than 50% degradation efficiency of pure S-C3N4. And in the process of photodegradation for tetracycline, the largest contribution rate is the photo-excited cavity (h+), followed by ·O2- and ·OH. Herein, we have provided a good example for removing antibiotic residues by using S-C3N4-based heterojunction towards environmental remediation.

Development of PSA@PS-TiO2 nanocomposite photocatalyst: structure, mechanism, and application using response surface designs and molecular modeling

Using periwinkle shell ash (PSA) and polystyrene (PS), a new-fangled PSA@PS-TiO₂ photocatalyst was fabricated. The morphological images of all the samples studied using a high-resolution transmission electron microscope (HR-TEM) showed a size distribution of 50-200 nm for all samples. The SEM-EDX showed that the membrane substrate of PS was well dispersed, confirming the presence of anatase/rutile phases of TiO₂, and Ti and O₂ were the major composites. Given the very rough surface morphology (atomic force microscopy (AFM)) due to PSA, the main crystal phases (XRD) of TiO₂ (rutile and anatase), low bandgap (UVDRS), and beneficial functional groups (FTIR-ATR), the 2.5 wt.% of PSA@PS-TiO₂ exhibited better photocatalytic efficiency for methyl orange degradation. The photocatalyst, pH, and initial concentration were investigated and the PSA@PS-TiO₂ was reused for five cycles with the same efficiency. Regression modeling predicted 98% efficiency and computational modeling showed a nucleophilic initial attack initiated by a nitro group. Therefore, PSA@PS-TiO₂ nanocomposite is an industrially promising photocatalyst for treating azo dyes, particularly, methyl orange from an aqueous solution.

g-C3N4 Based Photocatalyst for the Efficient Photodegradation of Toxic Methyl Orange Dye: Recent Modifications and Future Perspectives

Industrial effluents containing dyes are the dominant pollutants, making the drinking water unfit. Among the dyes, methylene orange (MO) dye is mutagenic, carcinogenic and toxic to aquatic organisms. Therefore, its removal from water bodies through effective and economical approach is gaining increased attention in the last decades. Photocatalytic degradation has the ability to convert economically complex dye molecules into non-toxic and smaller species via redox reactions, by using photocatalysts. g-C₃N₄ is a metal-free n-type semiconductor, typical nonmetallic and non-toxici polymeric photocatalyst. It widely used in photocatalytic materials, due to its easy and simple synthesis, fascinating electronic band structure, high stability and abundant availability. As a photocatalyst, its major drawbacks are its limited efficiency in separating photo-excited electron-hole pairs, high separated charge recombination, low specific surface area, and low absorption coefficient. In this review, we report the recent modification strategies adopted for g-C₃N₄ for the efficient photodegradation of MO dye. The different modification approaches, such as nanocomposites and heterojunctions, as well as doping and defect introductions, are briefly discussed. The mechanism of the photodegradation of MO dye by g-C₃N₄ and future perspectives are discussed. This review paper will predict strategies for the fabrication of an efficient g-C₃N₄-based photocatalyst for the photodegradation of MO dye.

Microwave Synthesis of Visible-Light-Activated g-C3N4/TiO2 Photocatalysts

The preparation of visible-light-driven photocatalysts has become highly appealing for environmental remediation through simple, fast and green chemical methods. The current study reports the synthesis and characterization of graphitic carbon nitride/titanium dioxide (g-C₃N₄/TiO₂) heterostructures through a fast (1 h) and simple microwave-assisted approach. Different g-C₃N₄ amounts mixed with TiO₂ (15, 30 and 45 wt. %) were investigated for the photocatalytic degradation of a recalcitrant azo dye (methyl orange (MO)) under solar simulating light. X-ray diffraction (XRD) revealed the anatase TiO₂ phase for the pure material and all heterostructures produced. Scanning electron microscopy (SEM) showed that by increasing the amount of g-C₃N₄ in the synthesis, large TiO₂ aggregates composed of irregularly shaped particles were disintegrated and resulted in smaller ones, composing a film that covered the g-C₃N₄ nanosheets. Scanning transmission electron microscopy (STEM) analyses confirmed the existence of an effective interface between a g-C₃N₄ nanosheet and a TiO₂ nanocrystal. X-ray photoelectron spectroscopy (XPS) evidenced no chemical alterations to both g-C₃N₄ and TiO₂ at the heterostructure. The visible-light absorption shift was indicated by the red shift in the absorption onset through the ultraviolet-visible (UV-VIS) absorption spectra. The 30 wt. % of g-C₃N₄/TiO₂ heterostructure showed the best photocatalytic performance, with a MO dye degradation of 85% in 4 h, corresponding to an enhanced efficiency of almost 2 and 10 times greater than that of pure TiO₂ and g-C₃N₄ nanosheets, respectively. Superoxide radical species were found to be the most active radical species in the MO photodegradation process. The creation of a type-II heterostructure is highly suggested due to the negligible participation of hydroxyl radical species in the photodegradation process. The superior photocatalytic activity was attributed to the synergy of g-C₃N₄ and TiO₂ materials.