Root canal morphology and symmetry of mandibular second premolars using cone-beam computed tomography

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review

INTRODUCTION

Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population.

METHODOLOGY

An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies.

RESULTS

The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 μm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 μm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology.

CONCLUSION

This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

Prevalence of Second Root and Root Canal in Mandibular and Maxillary Premolars Based on Two Classification Systems in Sub-Population of Northern Region (Saudi Arabia) Assessed Using Cone Beam Computed Tomography (CBCT): A Retrospective Study

The objective of this paper is to assess the prevalence of a second canal in maxillary and mandibular premolars based on two classification systems of root canal morphology using Cone beam computed tomography (CBCT) images. A total of 286 CBCT scans from the archive of the Radiology department of a hospital were assessed for the presence of a second canal in maxillary and mandibular premolars. The canal configuration and its assessment was undertaken using Vertucci and Ahmed's classification. A Chi-square test was used to test the significance of the difference between gender and age. A total of 286 premolars were examined (217 mandibular premolars and 69 maxillary premolars); of these, 173 teeth (60.5%) were from males and 113 were from females (39.5%). Some 62% of maxillary left first premolars had two roots, followed by maxillary right first premolars (47%), and then maxillary left second premolars (30%) and maxillary right ones (27%), respectively. Type IV Vertucci were seen in maxillary premolars, while type I were ordinarily seen in the included mandibular premolars. Surprisingly, Vertucci type III was only found in mandibular left first premolars at a frequency of 2%. One orifice with two separate canals and two orifices of two distinct canals with two portals of exit were predominantly noticed with maxillary first premolars (² FP B¹ P¹) in 73% and 81%, respectively, followed by (¹ FP ²) 19%. The prevalence of a second canal in maxillary and mandibular premolars was low in the investigated premolars in comparison to the premolars that had just one root and canal, as assessed based on Vertucci and Ahmed's root canal system classification.

A study of mandibular premolar root and canal morphology in a Black South African population using cone-beam computed tomography and two classification systems

PURPOSE

An investigation of the configurations of mandibular premolar roots and canals in a population of Black South Africans.

METHODS

Cone-beam computed tomography analysis of 772 mandibular premolars was performed, and the premolars were classified according to the systems proposed by Vertucci and Ahmed et al. Root number, canal morphology, age, and sex were recorded. Fisher's exact test was used to determine relationships based on age and sex (P < 0.05).

RESULTS

Single roots were seen in the majority of mandibular premolars (97.1%). Single canal configurations (i.e., Vertucci Type 1/Ahmed et al. ¹MP¹) were observed in 48.5% of first and 81.3% of second mandibular premolars. Mandibular first premolars demonstrated multiple canals in more than half of the sample (51.5%), and C-shaped morphology in more than one-tenth (11.1%). A relationship between sex and the presence of radicular grooves was demonstrated (P = 0.049), males being more likely to demonstrate this feature (P = 0.051). Multiple canals in mandibular first premolars also showed a relationship with sex (P = 0.005), a male predilection being evident (P = 0.007). The Ahmed et al. system proved superior to the Vertucci classification for reporting complex configurations and anatomical variations, although a greater number of unique categories were created.

CONCLUSION

Diverse mandibular premolar root and canal morphology was observed in the studied population. Clinicians must be aware of common morphological features as well as possible anatomical variations in mandibular premolars, as failure to treat complete root canal systems may negatively impact endodontic treatment outcomes.

A digital workflow for pair matching of maxillary anterior teeth using a 3D segmentation technique for esthetic implant restorations

We investigated a state-of-the-art algorithm for 3D reconstruction with a pair-matching technique, which enabled the fabrication of individualized implant restorations in the esthetic zone. This method compared 3D mirror images of crowns and emergence profiles between symmetric tooth pairs in the anterior maxilla using digital slicewise DICOM segmentation and the superimposition of STL data. With the outline extraction of each segment provided by 100 patients, the Hausdorff distance (HD) between two point sets was calculated to identify the similarity of the sets. By using HD thresholds as a pair matching criterion, the true positive rates of crowns were 100, 98, and 98%, while the false negative rates were 0, 2, and 2% for central incisors, lateral incisors, and canines, respectively, indicating high pair matching accuracy (> 99%) and sensitivity (> 98%). The true positive rates of emergence profiles were 99, 100, and 98%, while the false negative rates were 1, 0, and 2% for central incisors, lateral incisors, and canines, respectively, indicating high pair matching accuracy (> 99%) and sensitivity (> 98%). Therefore, digitally flipped contours of crown and emergence profiles can be successfully transferred for implant reconstruction in the maxillary anterior region to optimize esthetics and function.

Anatomical Evaluation of Root and Root Canal Morphology of Permanent Mandibular Dentition among the Saudi Arabian Population: A Systematic Review

This study aimed to conduct a compendious review of root canal morphology of “permanent mandibular teeth in different regions of Saudi Arabia” to obtain a large sample representing the total population. A detailed search through the databases Web of Science, Scopus, and PubMed was conducted following the PRISMA guidelines. The data were analyzed based on the following inclusion criteria: original full-length original articles that reported the variables of interest “(number of roots, number of canals, Vertucci's classification system and C-shaped canals or mid-mesial canals)” of the mandibular teeth and conducted on Saudi subjects. The retrieved data were presented as frequencies and percentages. The results revealed that 56.6% of mandibular central incisors had one canal and Vertucci type I (56.6%), while 57.4% of the mandibular lateral incisors had one canal, with Vertucci types I and III most frequent. In mandibular canines, 91.8% had one canal and 8.2% had two canals. Most of the mandibular first premolars had one root (86.6%), while almost all mandibular second premolars (91.5%) had one canal, and 96.9% had Vertucci type I configuration. Among the mandibular first molars, three and four canals were prevalent in 58.7% and 40.6%, respectively. The majority of mesial roots had Vertucci type IV (60.6%), and most of distal roots had Vertucci type I (72.2%). Most of the mandibular second molars had three canals (87.3%) and showed Vertucci type IV (39.4%) canals for mesial roots and Vertucci type I (95.6%) for distal roots. The C-shaped canals were seen in 8% of first premolars and 9.8% of second molars. The middle mesial canal was found in 4.2% and 0.4% of first and second molars, respectively. This review could represent “the population of Saudi Arabia as the included samples were combined from different regions of the country.” Some variations were noticed within the same group of teeth from different regions. However, the overall results of combined samples were comparable to the other international studies.

Influence of Commonly Used Endodontic Irrigants on the Setting Time and Metal Composition of Various Base Endodontic Sealers

The present study aimed to evaluate if commonly used endodontic irrigants such as 3% sodium hypochlorite (NaOCl, Prime Dental, Thane, India), 2% chlorhexidine (CHX, Sigma-Aldrich Co., St. Louis, MO, USA), and 17% ethylenediaminetetraacetic acid (EDTA, Meta-Biomed Co. Ltd., Cheongju-si, South Korea) influenced the setting time and metal composition of different base endodontic sealers on exposure. AH Plus (Dentsply De Trey GmbH, Konstanz, Germany), Sealapex (SybronEndo, Orange, CA, USA), mineral trioxide aggregate (MTA) Fillapex (Angelus Soluções Odontológicas, Londrina, Brazil), and Tubli-Seal (Kerr Dental, Orange, CA, USA) were selected as the different base representatives of endodontic sealers. These sealers were exposed to 3% NaOCl, 2% CHX, and 17% EDTA, and the individual setting time of the sealers was analyzed. The samples were analyzed for heavy metal elements such as chromium (Cr), nickel (Ni), cobalt (Co), cadmium (Cd), arsenic (As), mercury (Hg), lead (Pb), and beryllium (Be) by using inductively coupled plasma mass spectrometry (ICP-MS) analysis. For statistical analysis, one-way ANOVA and post hoc Tukey’s tests were used. All selected sealers showed variation in setting time post-exposure to different irrigants. MTA Fillapex had the shortest mean setting time (215.7 min, post-exposure at 187.3 min) (p < 0.05). Mean setting time was also affected for AH Plus (479.6 min, post-exposure at 423.9 min) (p < 0.05) and Tubli-Seal (514.7 min, post-exposure at 465.2 min) (p < 0.05). Sealapex showed the maximum reduction of setting time (864.8 min, post-exposure at 673.4 min) (p < 0.05). All tested sealers showed heavy metals (Cr, Ni, Co, Cd, As, Hg, and Pb) in their composition, and the quantities were influenced by interaction with different irrigants. The heavy metal Be was not seen in any of the samples. Sealapex showed the longest setting time in comparison to other test sealers. Heavy metals were most present in Sealapex, followed by AH Plus, Tubli-Seal, and MTA Fillapex. MTA Fillapex was seen to have the shortest setting time, and heavy metal composition was least affected on interaction with different commonly used endodontic irrigants. Further, this study provides significant insight into the influence of different endodontic irrigants on interaction with different base endodontic sealers, which has not been reported previously, and future studies should emphasize endodontic irrigant-sealer interactions and their possible effects in the long run.

Symmetry and Aesthetics in Dentistry

Animal bodies in general and faces in particular show mirror symmetry with respect to the median-sagittal plane, with exceptions rarely occurring. Bilateral symmetry to the median sagittal plane of the body also evolved very early. From an evolutionary point of view, it should therefore have fundamental advantages, e.g., more effective locomotion and chewing abilities. On the other hand, the recognition of bilaterally symmetric patterns is an important module in our visual perception. In particular, the recognition of faces with different spatial orientations and their identification is strongly related to the recognition of bilateral symmetry. Maxillofacial surgery and Dentistry affect effective masticatory function and perceived symmetry of the lower third of the face. Both disciplines have the ability to eliminate or mitigate asymmetries with respect to form and function. In our review, we will demonstrate symmetric structures from single teeth to the whole face. We will further describe different approaches to quantify cranial, facial and dental asymmetries by using either landmarks or 3D surface models. Severe facial asymmetries are usually caused by malformations such as hemifacial hyperplasia, injury or other diseases such as Noma or head and neck cancer. This could be an important sociobiological reason for a correlation between asymmetry and perceived disfigurement. The aim of our review is to show how facial symmetry and attractiveness are related and in what way dental and facial structures and the symmetry of their shape and color influence aesthetic perception. We will further demonstrate how modern technology can be used to improve symmetry in facial prostheses and maxillofacial surgery.