Interaction of erythromycin ethylsuccinate and acetaminophen with protein fraction of extracellular polymeric substances (EPS) from various bacterial aggregates

Promising bioprocesses for the efficient removal of antibiotics and antibiotic-resistance genes from urban and hospital wastewaters: Potentialities of aerobic granular systems

The use, overuse, and improper use of antibiotics have resulted in higher levels of antibiotic-resistant bacteria (ARB) and antibiotic-resistance genes (ARGs), which have profoundly disturbed the equilibrium of the environment. Furthermore, once antibiotic agents are excreted in urine and feces, these substances often can reach wastewater treatment plants (WWTPs), in which improper treatments have been highlighted as the main reason for stronger dissemination of antibiotics, ARB, and ARGs to the receiving bodies. Hence, achieving better antibiotic removal capacities in WWTPs is proposed as an adequate approach to limit the spread of antibiotics, ARB, and ARGs into the environment. In this review, we highlight hospital wastewater (WW) as a critical hotspot for the dissemination of antibiotic resistance due to its high level of antibiotics and pathogens. Hence, monitoring the composition and structure of the bacterial communities related to hospital WW is a key factor in controlling the spread of ARGs. In addition, we discuss the advantages and drawbacks of the current biological WW treatments regarding the antibiotic-resistance phenomenon. Widely used conventional activated sludge technology has proved to be ineffective in mitigating the dissemination of ARB and ARGs to the environment. However, aerobic granular sludge (AGS) technology is a promising technology-with broad adaptability and excellent performance-that could successfully reduce antibiotics, ARB, and ARGs in the generated effluents. We also outline the main operational parameters involved in mitigating antibiotics, ARB, and ARGs in WWTPs. In this regard, WW operation under long hydraulic and solid retention times allows better removal of antibiotics, ARB, and ARGs independently of the WW technology employed. Finally, we address the current knowledge of the adsorption and degradation of antibiotics and their importance in removing ARB and ARGs. Notably, AGS can enhance the removal of antibiotics, ARB, and ARGs due to the complex microbial metabolism within the granular biomass.

Extracellular polymeric substances-antibiotics interaction in activated sludge: A review

Antibiotics, the most frequently prescribed drugs, have been widely applied to prevent or cure human and veterinary diseases and have undoubtedly led to massive releases into sewer networks and wastewater treatment systems, a hotspot where the occurrence and transformation of antibiotic resistance take place. Extracellular polymeric substances (EPS), biopolymers secreted via microbial activity, play an important role in cell adhesion, nutrient retention, and toxicity resistance. However, the potential roles of sludge EPS related to the resistance and removal of antibiotics are still unclear. This work summarizes the composition and physicochemical characteristics of state-of-the-art microbial EPS, highlights the critical role of EPS in antibiotics removal, evaluates their defense performances under different antibiotics exposures, and analyzes the typical factors that could affect the sorption and biotransformation behavior of antibiotics. Next, interactions between microbial EPS and antibiotic resistance genes are analyzed. Future perspectives, especially the engineering application of microbial EPS for antibiotics toxicity detection and defense, are also emphatically stressed.

Pharmaceutical compound removal efficiency by a small constructed wetland located in south Brazil

The fate of pharmaceuticals during the treatment of effluents is of major concern since they are not completely degraded and because of their persistence and mobility in environment. Indeed, even at low concentrations, they represent a risk to aquatic life and human health. In this work, fourteen pharmaceuticals were monitored in a constructed wetland wastewater treatment plants (WWTP) assessed in both influent and effluent samples. The basic water quality parameters were evaluated, and the removal efficiency of pharmaceutical, potential for bioaccumulation, and the impact of WWTP were assessed using Polar Organic Chemical Integrative Sampler (POCIS) and biofilms. The pharmaceutical compounds were quantified by High Performance Liquid chromatography coupled to mass spectrometry. The sampling campaign was carried out during winter (July/2018) and summer (January/2019). The WWTP performed well regarding the removal of TSS, COD, and BOD₅ and succeeded to eliminate a significant part of the organic and inorganic pollution present in domestic wastewater but has low efficiency regarding the removal of pharmaceutical compounds. Biofilms were shown to interact with pharmaceuticals and were reported to play a role in their capture from water. The antibiotics were reported to display a high risk for aquatic organisms.

Extracellular biopolymers recovered as raw biomaterials from waste granular sludge and potential applications: A critical review

Granular sludge (GS) is a special self-aggregation biofilm. Extracellular polymeric substances (EPS) are mainly associated with the architectural structure, rheological behaviour and functional stability of fine granules, given that their significance to the physicochemical features of the biomass catalysing the biological purification process. This review targets the EPS excretion from GS and introduces newly identified EPS components, EPS distribution in different granules, how to effectively extract and recover EPS from granules, key parameters affecting EPS production, and the potential applications of EPS-based biomaterials. GS-based EPS components are highly diverse and a series of new contents are highlighted. Due to high diversity, emerging extraction standards are proposed and recovery process is capturing particular attention. The major components of EPS are found to be polysaccharides and proteins, which manifest a larger diversity of relative abundance, structures, physical and chemical characteristics, leading to the possibility to sustainably recover raw materials. EPS-based biomaterials not only act as alternatives to synthetic polymers in several applications but also figure in innovative industrial/environmental applications, including gel-forming materials for paper industry, biosorbents, cement curing materials, and flame retardant materials. In the upcoming years, it is foreseen that productions of EPS-based biomaterials from renewable origins would make a significant contribution to the advancement of the circular economy.

Role of Biofilms in Contaminant Bioaccumulation and Trophic Transfer in Aquatic Ecosystems: Current State of Knowledge and Future Challenges

In freshwater environments, microbial assemblages attached to submerged substrates play an essential role in ecosystem processes such as primary production, supported by periphyton, or organic matter decomposition, supported by microbial communities attached to leaf litter or sediments. These microbial assemblages, also called biofilms, are not only involved in nutrients fluxes but also in contaminants dynamics. Biofilms can accumulate metals and organic contaminants transported by the water flow and/or adsorbed onto substrates. Furthermore, due to their high metabolic activity and their role in aquatic food webs, microbial biofilms are also likely to influence contaminant fate in aquatic ecosystems. In this review, we provide (1) a critical overview of the analytical methods currently in use for detecting and quantifying metals and organic micropollutants in microbial biofilms attached to benthic substrata (rocks, sediments, leaf litter); (2) a review of the distribution of those contaminants within aquatic biofilms and the role of these benthic microbial communities in contaminant fate; (3) a set of future challenges concerning the role of biofilms in contaminant accumulation and trophic transfers in the aquatic food web. This literature review highlighted that most knowledge on the interaction between biofilm and contaminants is focused on contaminants dynamics in periphyton while technical limitations are still preventing a thorough estimation of contaminants accumulation in biofilms attached to leaf litter or sediments. In addition, microbial biofilms represent an important food resource in freshwater ecosystems, yet their role in dietary contaminant exposure has been neglected for a long time, and the importance of biofilms in trophic transfer of contaminants is still understudied.

Bacteriocin-a potential antimicrobial peptide towards disrupting and preventing biofilm formation in the clinical and environmental locales

Biofilm, a consortium of microbial cells, protected by extracellular polymeric matrix, is considered a global challenge due to the inherent antibiotic resistance conferred by its lifestyle. Besides, it poses environmental threats causing huge damage in food industries, fisheries, refineries, water systems, pharmaceutical industries, medical industries, etc. Living in a community of microbial populations is most critical in the clinical field, making it responsible for about 80% of severe and chronic microbial diseases. The necessity to find an alternative approach is the need of the hour to solve these crises. So far, many approaches have been attempted to disrupt the initial stage of biofilm formation, including adherence and maturation. Bacteriocins are a group of antimicrobial peptides, produced by bacteria having the potential to disrupt biofilm either by itself or in combination with other drugs than antibiotic counterparts. A clear understanding on mechanisms of bacterial biofilm formation, progression, and resistance will surely lead to the development of innovative, effective biofilm control strategies in pharmaceutical, health care industries and environmental locales.

Characteristics of extracellular polymeric substances and soluble microbial products of activated sludge in a pulse aerated reactor

This study aimed to investigate the stratification characteristics of extracellular polymeric substances (EPS) and the properties of soluble microbial products (SMP) of the activated sludge with pulse aeration. The activated sludge was acclimated with aeration on/off time of 5 min/10 min for 60 days. The results showed that both polysaccharides (PS) and proteins (PN) increased in the loosely bound EPS (LB-EPS) and the tightly bound EPS (TB-EPS) with the increase of operational time. Both the PN/PS ratio and the total LB-EPS increased in the later period of the pulse aerated acclimation process. There was an obvious positive correlation between sludge volume index (SVI) and LB-EPS (R ² = 0.871), mainly due to the PS in LB-EPS which was also significantly correlated with SVI (R ² = 0.954). A downward trend of SMP concentrations occurred at the end of acclimation which was opposite to the upward change of EPS contents. Two obvious fluorescence peaks were detected respectively in EPS and SMP by 3D-EEM fluorescence spectroscopy. Peak A was detected in both LB-EPS and TB-EPS, which was associated with tryptophan protein-like substances. Peak B representing humus carbon and carboxylic acids was mainly detected in SMP. The release of humus-like components in SMP from activated sludge was mainly in accordance with the dissolution and hydrolysis of PN in TB-EPS.

Mechanism of enhancing pyrene-degradation ability of bacteria by layer-by-layer assembly bio-microcapsules materials

The mechanism of improving pyrene (PYR)-degrading ability of bacteria CP13 in Layer-by-layer (LBL) assembly chitosan/alginate (CHI/ALG) bio-microcapsules was investigated. Flow cytometry analysis showed that LBL microcapsules could effectively slow down the increasing rate of bacterial cell membrane permeability and the decreasing rate of the membrane potential, so as to reduce the death rate and number of the cells, which could protect the degrading bacteria. The results of Fluorescence spectrum, circular dichroism (CD) spectrum and laser light scattering (LLS) analysis revealed that the other possible mechanism for LBL microcapsules to promote bacterial degradation were following: CHI could enter the secondary structure of the protein of the extracellular polymeric substances (EPS) from CP13 and combined with EPS to generate a stable ground material, which had larger molecular weight (3.76×10⁶ g mol^-1) than the original EPS (2.52×10⁶ g mol^-1). The combination of CHI and EPS resulted in the decrease of the density of EPS from 1.18 to 0.72 g L^-1, suggesting that CHI can loosen the EPS configurations, improving the capture ability of bacteria for PYR as well as the mass transfer of PYR from the extracellular to intracellular, thus eventually promoting the bacteria degrade performance.

Insights into the Fate and Removal of Antibiotics in Engineered Biological Treatment Systems: A Critical Review

Antibiotics, the most frequently prescribed drugs of modern medicine, are extensively used for both human and veterinary applications. Antibiotics from different wastewater sources (e.g., municipal, hospitals, animal production, and pharmaceutical industries) ultimately are discharged into wastewater treatment plants. Sorption and biodegradation are the two major removal pathways of antibiotics during biological wastewater treatment processes. This review provides the fundamental insights into sorption mechanisms and biodegradation pathways of different classes of antibiotics with diverse physical-chemical attributes. Important factors affecting sorption and biodegradation behavior of antibiotics are also highlighted. Furthermore, this review also sheds light on the critical role of extracellular polymeric substances on antibiotics adsorption and their removal in engineered biological wastewater treatment systems. Despite major advancements, engineered biological wastewater treatment systems are only moderately effective (48-77%) in the removal of antibiotics. In this review, we systematically summarize the behavior and removal of different antibiotics in various biological treatment systems with discussion on their removal efficiency, removal mechanisms, critical bioreactor operating conditions affecting antibiotics removal, and recent innovative advancements. Besides, relevant background information including antibiotics classification, physical-chemical properties, and their occurrence in the environment from different sources is also briefly covered. This review aims to advance our understanding of the fate of various classes of antibiotics in engineered biological wastewater treatment systems and outlines future research directions.

Interaction of ciprofloxacin with the activated sludge of the sewage treatment plant

Interaction of ciprofloxacin with the activated sludge of the sewage treatment plant is of importance for the ciprofloxacin migration and risk control. More than 96.0% ciprofloxacin was removed through the sludge adsorption. The sludge surface charge varied little with ciprofloxacin since most ciprofloxacin was dissociated into the neutral one. No obvious shift was observed for the soluble carbohydrate concentration and composition with the addition of ciprofloxacin, indicating the weak interaction between the carbohydrates and ciprofloxacin. The introduction of ciprofloxacin resulted in a reduction of the soluble protein concentration, a marked increase of the extracellular protein fluorescence intensities, and a dramatic emergence of new extracellular proteins. The alteration of the proteins highlights the strong interaction between the extracellular proteins and ciprofloxacin, and the consequent integration of certain soluble proteins and original unextractable inner layer extracellular proteins into the extractable extracellular proteins. Different types of interactions are suggested to dominate between the extracellular proteins and the differently dissociated ciprofloxacin.

Responses of reef building corals to microplastic exposure

Pollution of marine environments with microplastic particles (i.e. plastic fragments <5 mm) has increased rapidly during the last decades. As these particles are mainly of terrestrial origin, coastal ecosystems such as coral reefs are particularly threatened. Recent studies revealed that microplastic ingestion can have adverse effects on marine invertebrates. However, little is known about its effects on small-polyp stony corals that are the main framework builders in coral reefs. The goal of this study is to characterise how different coral species I) respond to microplastic particles and whether the exposure might II) lead to health effects. Therefore, six small-polyp stony coral species belonging to the genera Acropora, Pocillopora, and Porites were exposed to microplastics (polyethylene, size 37-163 μm, concentration ca. 4000 particles L^-1) over four weeks, and responses and effects on health were documented. The study showed that the corals responded differentially to microplastics. Cleaning mechanisms (direct interaction, mucus production) but also feeding interactions (i.e. interaction with mesenterial filaments, ingestion, and egestion) were observed. Additionally, passive contact through overgrowth was documented. In five of the six studied species, negative effects on health (i.e. bleaching and tissue necrosis) were reported. We here provide preliminary knowledge about coral-microplastic-interactions. The results call for further investigations of the effects of realistic microplastic concentrations on growth, reproduction, and survival of stony corals. This might lead to a better understanding of resilience capacities in coral reef ecosystems.

Overproduction of microbial extracellular polymeric substances in subtropical intertidal sediments in response to endocrine disrupting chemicals

Microorganisms and their extracellular polymeric substances (EPS) in sediments are important in sediment stabilization and the fate of pollutants. However, how toxic organic pollutants affect bacteria and EPS in sediments, particularly in subtropical intertidal zones is poorly known. The present study aims to investigate the bacterial abundance and related EPS in simulated intertidal sandflat and mangrove sediments under the stress of endocrine disrupting chemicals (EDCs). Results showed that the temporal changes of the bacterial number in both sandflat and mangrove sediments were similar, increased from days 0 to 56 then became steady during the 84-days incubation. Bacteria exhibited an important role in the production of high molecular weight (HMW) EPS protein and the degradation of the low molecular weight (LMW) EPS protein. During incubation, the EPS polysaccharides changed from a colloidal-LMW fraction at the beginning to a more complex-HMW fraction at the end of the experiment. The increases in the concentration of HMW polysaccharides might contribute to sediment stabilization. Among different spiked EDCs, nonylphenol (NP) and 17α-ethinylestradiol (EE₂) tended to accumulate in both sandflat and mangrove sediments and posed stresses to bacterial growth, especially the latter sediment. The persistent EDCs promoted a higher production of EPS polysaccharides and proteins in both sediments when compared to the respective control, but the EPS in the sandflat sediment was mainly in the colloidal fraction while the bound fraction was more abundant in the mangrove sediment. The present results enhance our understanding of the effects of EDCs on sediment biofilms in intertidal systems. This study also demonstrates the significance of EPS polysaccharides and proteins in sediment stabilization and provides a fundamental basis for future microbiology studies.

Biofilms: an emergent form of bacterial life

Bacterial biofilms are formed by communities that are embedded in a self-produced matrix of extracellular polymeric substances (EPS). Importantly, bacteria in biofilms exhibit a set of 'emergent properties' that differ substantially from free-living bacterial cells. In this Review, we consider the fundamental role of the biofilm matrix in establishing the emergent properties of biofilms, describing how the characteristic features of biofilms - such as social cooperation, resource capture and enhanced survival of exposure to antimicrobials - all rely on the structural and functional properties of the matrix. Finally, we highlight the value of an ecological perspective in the study of the emergent properties of biofilms, which enables an appreciation of the ecological success of biofilms as habitat formers and, more generally, as a bacterial lifestyle.

Effect of carbon sources on the aggregation of photo fermentative bacteria induced by L-cysteine for enhancing hydrogen production

Poor flocculation of photo fermentative bacteria resulting in continuous biomass washout from photobioreactor is a critical challenge to achieve rapid and stable hydrogen production. In this work, the aggregation of Rhodopseudomonas faecalis RLD-53 was successfully developed in a photobioreactor and the effects of different carbon sources on hydrogen production and aggregation ability were investigated. Extracellular polymeric substances (EPS) production by R. faecalis RLD-53 cultivated using different carbon sources were stimulated by addition of L-cysteine. The absolute ζ potentials of R. faecalis RLD-53 were considerably decreased with addition of L-cysteine, and aggregation barriers based on DLVO dropped to 15-43 % of that in control groups. Thus, R. faecalis RLD-53 flocculated effectively, and aggregation abilities of strain RLD-53 cultivated with acetate, propionate, lactate and malate reached 29.35, 32.34, 26.07 and 24.86 %, respectively. In the continuous test, hydrogen-producing activity was also promoted and reached 2.45 mol H₂/mol lactate, 3.87 mol H₂/mol propionate and 5.10 mol H₂/mol malate, respectively. Therefore, the aggregation of R. faecalis RLD-53 induced by L-cysteine is independent on the substrate types, which ensures the wide application of this technology to enhance hydrogen recovery from wastewater dominated by different organic substrates.

Effects of substrate shock on extracellular polymeric substance (EPS) excretion and characteristics of attached biofilm anammox granules

The production mechanism of an extracellular polymeric substance (EPS) and its effects on the performance of anammox granules were evaluated.

Impact of liming and drying municipal sewage sludge on the amount and availability of (14)C-acetyl sulfamethoxazole and (14)C-acetaminophen residues

Acetyl Sulfamethoxazole (AC-SMX) and acetaminophen (ACM) can be found in municipal sewage sludge, and their content and availability may be influenced by sludge treatments, such as drying and liming. A sludge similarly centrifuged with/without a flocculant was spiked with (14)C-labelled AC-SMX or ACM. Then, it was either limed (20% CaO) or/and dried under different laboratory conditions (1 week at ambient temperature; and 48 h at 40 or 80 °C). The total amount and distribution of the (14)C-compounds among several chemical fractions, based on the sludge floc definition, were assessed at the end of the treatments. All the (14)C-activity brought initially was recovered in the limed and/or dried sludges for AC-SMX but only between 44.4 and 84.9% for ACM, with the highest rate obtained for the limed sludge. Drying at 80 °C or liming increased the percentage of the sludge total organic carbon recovered in the extracts containing soluble extracellular polymeric substances (S-EPS) and the percentage of the total (14)C-activity extracted simultaneously. The non-extractable residues represented only 3.9-11.6% of the total (14)C-activity measured in the treated sludges for AC-SMX and 16.9-21.8% for ACM. The presence of AC-SMX and ACM residues in the treated sludges, after liming and drying under different conditions, was shown using some (14)C-labelled molecules. At this time scale and according to the extraction method selected, most of the (14)C-residues remained soluble and easily extractable for both compounds. This result implies that certain precautions should be taken when storing sludges before being spread on the field. Sludge piles, particularly the limed sludge, should be protected from rain to limit the production of lixiviates, which may contain residues of AC-SMX and ACM.

Trace organic contaminants in biosolids: Impact of conventional wastewater and sludge processing technologies and emerging alternatives

This paper critically reviews the fate of trace organic contaminants (TrOCs) in biosolids, with emphasis on identifying operation conditions that impact the accumulation of TrOCs in sludge during conventional wastewater and sludge treatment and assessing the technologies available for TrOC removal from biosolids. The fate of TrOCs during sludge thickening, stabilisation (e.g. aerobic digestion, anaerobic digestion, alkaline stabilisation, and composting), conditioning, and dewatering is elucidated. Operation pH, sludge retention time (SRT), and temperature have significant impact on the sorption and biodegradation of TrOCs in activated sludge that ends up in the sludge treatment line. Anaerobic digestion may exacerbate the estrogenicity of sludge due to bioconversion to more potent metabolites. Application of advanced oxidation or thermal pre-treatment may minimise TrOCs in biosolids by increasing the bioavailability of TrOCs, converting TrOCs into more biodegradable products, or inducing complete mineralisation of TrOCs. Treatment of sludge by bioaugmentation using various bacteria, yeast, or fungus has the potential to reduce TrOC levels in biosolids.

Characterization of the interactions between tetracycline antibiotics and microbial extracellular polymeric substances with spectroscopic approaches

The antibiotics have attracted global attentions for their impact on aquatic ecosystem. The knowledge about the fate of antibiotics encountering extracellular polymeric substances (EPS) is, however, limited. In this study, we investigated the interacting mechanisms of tetracycline (TC) to EPS extracted from aerobic activated sludge. The contributions of the main components of EPS, extracellular proteins, and polysaccharides were evaluated using bovine serum albumin and alginate sodium, respectively. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and nuclear magnetic resonance indicated that hydroxyl, carboxyl, and amino groups were the domain chemical groups involved in the interaction between TC and EPS, and the binding of TC onto EPS changed the structure of these chemical groups, thus causing shifts in their UV-visible absorption spectra. In addition, we found that extracellular proteins, rather than polysaccharides, were the major active contents involved in the interaction. Three-dimensional excitation-emission matrix fluorescence spectroscopy showed that the fluorophores in EPS were clearly quenched by TC and the static quenching process was observed, implying the complex formation of TC and EPS. Furthermore, thermodynamic analysis indicated that the binding of TC with EPS is spontaneous and dominated by electrostatic forces.