High-efficient mercury removal from environmental water samples using di-thio grafted on magnetic mesoporous silica nanoparticles

Aptamer-functionalized and silver-coated polydopamine-copper hybrid nanoflower adsorbent embedded with magnetic nanoparticles for efficient mercury removal

Mercury (Hg) emissions are increasing annually owing to rapid global industrialization. Hg poisoning can severely affect the human body owing to its persistence and bioaccumulation. In this study, hybrid nanoflowers (NFs) were synthesized by promoting the formation of primary copper-phosphate crystals coordinated with polydopamine (PDA) and Fe₃O₄ magnetic nanoparticles (MNPs), followed by coating with silver nanoparticles on the surface of the NFs (Ag-MNP-PDA-Cu NFs). The results suggest that the hierarchical structure of the NFs enabled a large surface area with nanosized pores, which were exploited for Hg adsorption. The adsorbed Hg ions could be further eliminated from the solution based on the magnetic characteristics of the NFs. Additionally, hybrid NFs functionalized with Hg²⁺-binding aptamers (Apt-Ag-MNP-PDA-Cu NFs) were prepared based on the silver-sulfur interactions between the Ag-MNP-PDA-Cu NFs and thiol-modified aptamers. The performance of both adsorbents demonstrated that the immobilization of Hg²⁺-binding aptamers significantly improved the elimination of Hg from solution. The Hg²⁺ adsorption isotherm of the Apt-Ag-MNP-PDA-Cu NFs followed the Dubinin-Radushkevich model, with a maximum adsorption capacity of 1073.19 mg/g. The Apt-Ag-MNP-PDA-Cu NFs adsorbed greater amounts of Hg²⁺ than the non-functionalized NFs at the same concentrations, which confirmed that the functionalization of Hg²⁺-binding aptamers on the NFs improved the Hg²⁺ removal performance. The results suggest that Apt-Ag-MNP-PDA-Cu NFs could serve as an efficient Hg-removing adsorbent, possibly by providing binding sites for the formation of T-Hg²⁺-T complexes.

Controllable synthesis of bifunctional corn stalk cellulose as a novel adsorbent for efficient removal of Cu2+ and Pb2+ from wastewater

A corn stalk cellulose-based adsorbent with bifunctional groups of -NH-/-NH₂ and C-S/C=S for efficient removal of Cu²⁺ and Pb²⁺ was successfully synthesized. Under specific alkali and reaction conditions, 4.58 mmol/g of C-S/C=S groups were further introduced on surface of aminated cellulose with 6.99 mmol/g of amino groups. The introduced CS₂ would only participate in the esterification with -NH₂ groups to form special dithiocarbamate (DTC) structures containing -NH- groups (-NHCS₂^-). The synthesized DTC structures would not reduce total amount of -NH-/-NH₂ groups on aminated cellulose to keep its excellent adsorption performance for Cu²⁺, and the introduced appropriate number of C-S/C=S groups could ensure the efficient removal of Pb²⁺. It was suitable for removal of coexisting Cu²⁺ and Pb²⁺ with low initial concentration in real wastewater, and the removal rates were both close to 100%. The application of the bifunctional cellulose offered a novel way for purpose of 'waste treatment by waste'.

Heavy metal pollution and the role of inorganic nanomaterials in environmental remediation

Contamination of water and soil with toxic heavy metals is a major threat to human health. Although extensive work has been performed on reporting heavy metal pollutions globally, there are limited review articles on addressing this pernicious phenomenon. This paper reviews inorganic nanoparticles and provides a framework for their qualities required as good nanoadsorbents for efficient removal of heavy metals from water. Different inorganic nanoparticles including metals, metal oxides and metal sulfides nanoparticles have been applied as nanoadsorbents to successfully treat water with high contaminations of heavy metals at concentrations greater than 100 mg l^-1, achieving high adsorption capacities up to 3449 mg g^-1. It has been identified that the synthesis method, selectivity, stability, regeneration and reusability, and adsorbent separation from solution are critical parameters in deciding on the quality of inorganic nanoadsorbents. Surface functionalized nanoadsorbents were found to possess high selectivity and capacity for heavy metals removal from water even at a very low adsorbent dosage of less than 2 g l^-1, which makes them better than conventional adsorbents in environmental remediation.

Can water remediated by manganese spinel ferrite nanoparticles be safe for marine bivalves?

In the last few years the use of nanoparticles (NPs) such as the manganese spinel ferrite (MnFe₂O₄) has been increasing, with a vast variety of applications including water remediation from pollutants as metal(oid)s. Although an increasing number of studies already demonstrated the potential toxicity of NPs towards aquatic systems and inhabiting organisms, there is still scarce information on the potential hazard of the remediated water using NPs. The present study aimed to evaluate the ecotoxicological safety of Pb contaminated seawater remediated with MnFe₂O₄, NPs, assessing the toxicity induced in mussels Mytilus galloprovincialis exposed to contaminated seawater and to water that was remediated using MnFe₂O₄, NPs. The results obtained demonstrated that seawater contaminated with Pb, NPs or the mixture of both (Pb + NPs) induced higher toxicity in mussels compared to organisms exposed to Pb, NPs and Pb + NPs after the remediation process. In particular, higher metabolic depression, oxidative stress and neurotoxicity were observed in mussels exposed to contaminated seawater in comparison to mussels exposed to remediated seawater.

Modification of fibrous membrane for organic and pathogenic contaminants removal: from design to application

In this study, a flexible multifunctional fibrous membrane for heterogeneous Fenton-like removal of organic and pathogenic contaminants from wastewater was developed by immobilizing zerovalent iron nanoparticles (Fe-NPs) on an amine/thiol grafted polyester membrane. Full characterization of the resulting polyester membranes allowed validation of successful grafting of amine/thiol (NH₂ or SH) functional groups and immobilization of Fe-NPs (50–150 nm). The Fenton-like functionality of iron immobilized fibrous membranes (PET–Fe, PET–Si–NH₂–Fe, PET–NH₂–Fe, and PET–SH–Fe) in the presence of hydrogen peroxide (H₂O₂) was comparatively studied in the removal of crystal violet dye (50 mg L⁻¹). The effect of pH, amount of iron and H₂O₂ concentration on dye removal was systematically investigated. The highest dye removal yield reached 98.87% in 22 min at a rate constant 0.1919 min⁻¹ (R² = 95.36) for PET–SH–Fe providing 78% toxicity reduction assessed by COD analysis. These membranes could be reused for up to seven repeated cycles. Kinetics and postulated mechanism of colour removal were proposed by examining the above results. In addition, the resultant membranes showed substantial antibacterial activity against pathogenic bacteria (Staphylococcus epidermidis, Escherichia coli) strains studied through disc diffusion-zone inhibitory and optical density analysis. These findings are of great importance because they provide a prospect of textile-based flexible catalysts in heterogeneous Fenton-like systems for environmental and green chemistry applications.

Multifunctional fibrous membrane for heterogeneous Fenton-like removal of organic and pathogenic contaminants from wastewater was developed by immobilizing zerovalent iron nanoparticles (Fe-NPs) on an amine/thiol grafted polyester membrane.

Mesoporous silica based recyclable probe for colorimetric detection and separation of ppb level Hg2+ from aqueous medium

Functional mesoporous silica probes, MCM-TFM and SBA-TFM, have been synthesized with varying pore sizes and having S-donor sites judiciously selected to bind soft metal centers. The soft S-donor centers are contributed by the thiol functional groups that are introduced into the silica matrices by functionalization with tris(4-formylphenyl)amine followed by 2-aminothiophenol. The materials rapidly and selectively detect Hg2+ colorimetrically and the change in color profile can be perceived through bare eyes. The probes can decontaminate the pollutant heavy metal from aqueous medium at ppb level and the materials are recyclable and reusable for several separation cycles.

Enhancement in the photocatalytic antifouling efficiency over cherimoya-like InVO4/BiVO4 with a new vanadium source

The problem of marine life attachment and its pollution to facilities has caused a lot of great troubles in the development and application of marine resources. The holes generated by the photocatalytic coating materials under sunlight may produce strong oxidizing species and showed a significant effect on the degradation and bactericidal performance of environmental organic matter. In this paper, a novel bismuth vanadate/indium vanadate (BiVO₄/InVO₄) composite with cherimoya-like microstructure was fabricated using new vanadium source. It is found that the composite materials showed enhanced photocatalytic antifouling property. The degradation efficiency of the model pollutes (Rhodamine B, RhB) achieved 99.775% within 280 min over BiVO₄/InVO₄ nanostructures, and the sterilization rate of E. coli, S. aureus, P. aeruginosa and A. carterae achieved 99.7148%, 99.5519%, 99.5411% and 96.00%, respectively. Moreover, the circulate photocatalytic degradation of antibacteria experiments demonstrated the outstanding stability and reusability of BiVO₄/InVO₄ composite. According to the active free radical trapping experiments, the hydroxyl radical (OH) and superoxide radical (O^2-) were certified to be the main reactive oxygen species in the BiVO₄/InVO₄ system. The distinctly enhanced photocatalytic performance of BiVO₄/InVO₄ nanomaterial primarily resulted from the narrow bandgap (about 1.86 eV). This study not only provides a new method for developing novel antibacterial materials, but also introduces a visible light-driven photocatalyst for water treatment and marine antifouling, especially for red tide control.

Development of a sensor for trivalent iron: AHP fixed on mesoporous silica

Optical sensor for iron(iii) detection via Fe(iii) complexation in the solid phase.

Adsorption of mercury(ii) from water by a novel sPAN fiber containing sulfhydryl, carboxyl and amino groups

A novel fiber containing sulfhydryl, carboxyl and amino groups (sPAN) with high adsorption capacity for mercury was facilely prepared by chemically grafting cysteine onto a commercial polyacrylonitrile (PAN) fiber in a one-step reaction. The as-prepared sPAN was characterized for its chemical structure, thermal stability, tensile strength, surface morphology and surface binding species. The adsorption and desorption performances for mercury were investigated by both batch and dynamic experiments. The results showed that sPAN was effective for mercury removal over pH 4–7, and ionic strength produced no obvious interference with the adsorption. The equilibrium adsorption capacity of mercury could be as high as 459.3 (±16.0) mg g⁻¹, much higher than for most previously reported materials due to the strong interaction between mercury ions and sulfhydryl, carboxyl, amino groups. More than 99% adsorbed mercury could be eluted by the mixture of hydrochloric acid and thiourea, and the regenerated sPAN could be reused for mercury removal with no significant loss of adsorption capacity even after 10 cycles. The dynamic adsorption results indicated that at initial mercury concentrations of 0.1 and 1.0 mg L⁻¹, the residual mercury concentration was less than 1 μg L⁻¹, which could meet the criterion for drinking water. Moreover, at an initial mercury concentration of 10 mg L⁻¹, the residual mercury concentration was less than 50 μg L⁻¹, which could satisfy the Chinese national industry water discharge standard.

A novel fiber containing sulfhydryl, carboxyl and amino groups (sPAN) with high adsorption capacity for mercury was facilely prepared by chemically grafting cysteine onto a commercial polyacrylonitrile (PAN) fiber in a one-step reaction.

Efficient removal of amoxicillin and paracetamol from aqueous solutions using magnetic activated carbon

Activated carbon (AC)/CoFe₂O₄ nanocomposites, MAC-1 and MAC-2, were prepared by a simple pyrolytic method using a mixture of iron(III)/cobalt(II) benzoates and iron(III)/cobalt(II) oxalates, respectively, and were used as efficient adsorbents for the removal of amoxicillin (AMX) and paracetamol (PCT) of aqueous effluents. The synthesized nanocomposites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometry (VSM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and transmission electron microscopy (TEM). The sizes of cobalt ferrite nanoparticles formed from benzoates of iron(III)/cobalt(II) and oxalates of iron(III)/cobalt(II) precursors were in the ranges of 5-80 and 6-27 nm, respectively. The saturation magnetization (M _s), remanence (M _r) and coercivity (H _c) of the MAC-2 nanocomposites were found to be 3.07 emu g^-1, 1.36 emu g^-1 and 762.49 Oe; for MAC-1, they were 0.2989 emu g^-1, 0.0466 emu g^-1 and 456.82 Oe. The adsorption kinetics and isotherm studies were investigated, and the results showed that the as-prepared nanocomposites MAC-1 and MAC-2 could be utilized as an efficient, magnetically separable adsorbent for environmental cleanup. The maximum sorption capacities obtained were 280.9 and 444.2 mg g^-1 of AMX for MAC-1 and MAC-2, respectively, and 215.1 and 399.9 mg g^-1 of PCT using MAC-1 and MAC-2, respectively. Both adsorbents were successfully used for simulated hospital effluents, removing at least 93.00 and 96.77% for MAC-1 and MAC-2, respectively, of a mixture of nine pharmaceuticals with high concentrations of sugars, organic components and saline concentrations.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.

Remediation of mercury contaminated saltwater with functionalized silica coated magnetite nanoparticles

The study aimed to evaluate the efficiency of dithiocarbamate functionalized silica coated magnetite nanoparticles (NPs) for Hg decontamination of saltwater either contaminated with Hg alone or with As and Cd. For this, the residual levels of Hg in seawater were assessed and Hg-contaminated or Hg+As+Cd-contaminated seawater toxicity to aquatic biota, before and after the sorption process, was compared. The results showed that under highly competitive conditions (water salts, Cd and As), the removal of Hg from seawater, by using these magnetic NPs, for the lowest concentration (50μg/L) was superior to 98% and for the highest concentration (500μg/L) ranged between 61% to 67%. Despite the great affinity of the magnetic NPs for Hg, they were not effective at removing As and Cd from seawater. In relation to the ecotoxicity endpoints after remediation, the mixture with lower Hg concentration exhibited no toxicity to rotifer Brachionus plicatilis and bacteria Vibrio fischeri ; however, the mixture with higher concentration revealed toxicity. In addition, the toxicity of bacteria V. fischeri, rotifer B. plicatilis and algae Phaeodactylum tricornutum, whose responses where inhibited during its exposure to the non-remediate sample was considerably reduced after treatment with NPs. Furthermore, microalgae P. tricornutum appears to be most sensitive species while Artemia franciscana showed no toxic effects to the tested solutions. Both chemical and ecotoxicological approaches revealed a high efficiency for the remediation of Hg-contaminated saltwater.

Removal of mercury(ii) and methylene blue from a wastewater environment with magnetic graphene oxide: adsorption kinetics, isotherms and mechanism

The magnetic graphene oxide (MGO) has maximum adsorption capacities of 71.3 and 306.5 mg g⁻¹ for Hg(ii) and methylene blue, respectively. And MGO has a magnetization of 31.5 emu g⁻¹, easily separated from solutions via exterior magnets.

Use of red mud (bauxite residue) for the retention of aqueous inorganic mercury(II)

The effectiveness of the oxide-rich residue from bauxite refining (red mud) to remove inorganic Hg(II) from aqueous solutions was assessed. The aspects studied comprised the kinetics of the process (t = 1 min-24 h), the effect of pH (3.5-11.5), the interacting effect between salt concentration (0.01-1 M NaNO3) and pH and the Hg(II) sorption isotherm. Hg leaching from spent red mud was evaluated using the toxicity characteristics leaching procedure (TCLP) method. The sorption of Hg(II) onto red mud was very fast, with most of Hg(II) (97.0-99.7%) being removed from 0.5-50 μM Hg solutions in few minutes. The kinetic process was best described by Ho's pseudo-second order equation, pointing to chemisorption as the rate controlling step. Hg(II) sorption efficiency was very high (% removal between 93.9 and 99.8%) within all the studied pH range (3.5-11.5) and added Hg concentrations (5 and 50 μM), being optimal at pH 5-8 and decreasing slightly at both lowest and highest pH. The effect of background electrolyte concentration suggests specific sorption as the main interaction mechanism between Hg(II) and red mud, but the increasing non-sorbed Hg concentrations at low and high pH for higher electrolyte concentrations also revealed the contribution of an electrostatic component to the process. The sorption isotherm showed the characteristic shape of high affinity sorbents, and it was better described by the Redlich-Peterson and Freundlich equations, which are models that assume sorbent heterogeneity and involvement of more than one mechanism. The estimated Hg(II) sorption capacity from the Langmuir equation (q m ~9 mmol/kg) was comparable to those of some inorganic commercial sorbents but lower than most bio- or specifically designed sorbents. The leachability of retained Hg(II) from spent red mud (0.02, 0.25 and 2.42 mmol Hg/kg sorbed concentration) was low (0.28, 1.15 and 2.23 μmol/kg, respectively) and accounted for 1.2, 0.5 and 0.1% of previously sorbed Hg, indicating that Hg(II) is tightly bound by red mud once sorbed.

Isotherm, kinetic, and thermodynamic studies on Hg(II) adsorption from aqueous solution by silica- multiwall carbon nanotubes

Silica combined with 2% multiwall carbon nanotubes (SiO2-CNT) was synthesized and characterized. Its sorption efficacy was investigated for the Hg(II) removal from an aqueous solution. The effect of pH on the percentage removal by the prepared material was examined in the range from 3 to 7. The adsorption kinetics were well fitted by using a pseudo-second-order model at various initial Hg(II) concentrations with R (2) of >0.99. The experimental data were plotted using the interparticle diffusion model, which indicated that the interparticle diffusion is not the only rate-limiting step. The data is well described by the Freundlich isotherm equation. The activation energy (Ea) for adsorption was 12.7 kJ mol(-1), indicating the process is to be physisorption. Consistent with an endothermic process, an increase in the temperature resulted in increasing mercury removal with a ∆H(o) of 13.3 kJ/mol and a ∆S(o) 67.5 J/mol K. The experimental results demonstrate that the combining of silica and nanotubes is a promising alternative material, which can be used to remove the mercury from wastewaters.

Post-synthesis functionalization of a zeolitic imidazolate structure ZIF-90: a study on removal of Hg(ii) from water and epoxidation of alkenes

Thiol-functionalized ZIF-90 (ZIF-90-SH) and its Mn(ii)-immobilized form (ZIF-90-S[Mn]) were prepared. The former exhibited an Hg²⁺adsorption capacity ofca.22.4 mg g⁻¹at room temperature and ZIF-90-S[Mn] showed good catalytic performance in the epoxidation of several important alkenes using molecular oxygen under atmospheric pressure.