Removal of industrial dyes and heavy metals by Beauveria bassiana: FTIR, SEM, TEM and AFM investigations with Pb(II)

Enhancing Miscanthus floridulus remediation of soil cadmium using Beauveria bassiana FE14: Plant growth promotion and microbial interactions

Soil heavy metal pollution presents substantial risks to food security and human health. This study focused on the efficiency of plant growth-promoting fungus-Beauveria bassiana FE14 and Miscanthus floridulus on the synergistic remediation of soil Cd contamination. Results revealed that B. bassiana FE14 significantly enhanced the growth of M. floridulus, substantially decreased Cd content in soil by 79.39 %, and modified enzyme activities (superoxide dismutase, peroxidase, and catalase) to alleviate Cd-induced oxidative stress in plants, determined by the physical and chemical indicators and enzyme activities of soil and plant. Based on microbiome analysis, this study also found significant changes in the composition, structure, and molecular ecological network of endophytic bacterial communities in roots, but this study had little effect on the bacterial and fungal communities in rhizosphere soil. In addition, the key genera (including Sphingomonas, unclassified_Comamonadaceae, Massilia, Bradyrhizobium, and Paraglomus) and key genes/enzymes (including cadC, zinc transporter, zinc and cadmium transporter, exoZ/Y/Z, catalase-peroxidase, superoxide dismutase, nitrite reductase, acid phosphatase, etc.) were involved in promoting plant growth and alleviating Cd stress. These findings revealed the potential of B. bassiana FE14 and M. floridulus working in synergy to enhance the phytoremediation efficiency of Cd-contaminated soils, thus presenting a promising approach for integrated plant-microbe remediation strategies.

Effective soil remediation with fungal Co-inoculation and king grass for robust cadmium and chromium phytoextraction

Bioremediation, an economical and environmentally friendly approach, provides a sustainable solution for mitigating heavy metal contamination in soils. This study identifies four fungal strains-Trichoderma harzianum DAA8, Trichoderma reesei DAA9, Rhizomucor variabilis DFB3, and Trichoderma asperellum LDA4-that exhibit tolerance to cadmium (Cd) and chromium (Cr). These strains were isolated from soils impacted by heavy metal contamination in mining regions. Rigorous examinations of these strains led us to determine their Minimum Inhibitory Concentrations (MICs) and optimal absorption-reduction conditions. Our microscopic data and GC-MS analysis indicate that these strains can accumulate Cd and Cr by generating compounds, such as ketones and imines, in heavy metal environments. We evaluated the remediation efficacy of both single and co-cultures of Rhizomucor variabilis DFB3 and Trichoderma asperellum LDA4 in conjunction with king grass, a plant known for its heavy metal accumulation capabilities. Our findings indicated an impressive 41.9% increase in plant biomass and 47.2% and 64.4% increase in Cd and Cr accumulation respectively. The removal rates of Cd and Cr were 16.5% and 19.0%, respectively, following the co-inoculation of Rhizomucor variabilis DFB3 and Trichoderma asperellum LDA4. These rates represent increases of 37.1% and 33.7% compared to the removal rates achieved with king grass alone. This study not only advances strategies to manage Cd-Cr contamination but also sets a pathway for efficient heavy metal soil remediation using a microbial-plant combined technique.

Microbial Removal of Heavy Metals from Contaminated Environments Using Metal-Resistant Indigenous Strains

Contamination of soil with heavy metals has become a matter of global importance due to its impact on agriculture, environmental integrity, and therefore human health and safety. Several microbial strains isolated from soil contaminated by long-term chemical and petrochemical activities were found to manifest various levels of tolerance to Cr, Pb, and Zn, out of which Bacillus marisflavi and Trichoderma longibrachiatum exhibited above-moderate tolerance. The concentrations of target heavy metals before and after bioremediation were determined using electrochemical screen-printed electrodes (SPE) modified with different nanomaterials. The morpho-structural SEM/EDX analyses confirmed the presence of metal ions on the surface of the cell, with metal uptake being mediated by biosorption with hydroxyl, carboxyl, and amino groups as per FTIR observations. T. longibrachiatum was observed to pose a higher bioremediation potential compared to B. marisflavi, removing 87% of Cr and 67% of Zn, respectively. Conversely, B. marisflavi removed 86% of Pb from the solution, compared to 48% by T. longibrachiatum. Therefore, the fungal strain T. longibrachiatum could represent a viable option for Cr and Zn bioremediation strategies, whereas the bacterial strain B. marisflavi may be used in Pb bioremediation applications.

Multimetal bioremediation from aqueous solution using dead biomass of Mucor sp. NRCC6 derived from detergent manufacturing effluent

Among ten metal-tolerant fungal isolates obtained from the microbiomes of detergent industry effluent, Mucor sp. NRCC6 showed the highest tolerance and an adaptive behavior toward the heavy metals Ni2+, Pb2+, Mn2+, and Zn2+. It gave the highest growth rates 0.790 ± 0.59, 0.832 ± 0.32, 0.774 ± 0.40, and 0.741 ± 1.06 mm/h along with the lowest growth inhibition 9.19, 4.37, 11.04, and 14.83% in the presence of Pb2+, Zn2+, Ni2+, and Mn2+, respectively, at a concentration of 5.0 g/L. Then, Mucor sp. NRCC6 was selected as a biotrap for the removal of these heavy metals. The optimized operating conditions were detected to be pH 6.0 for Pb2+, Zn2+, and Mn2+ and pH 5.5 for Ni2+ at 30 °C; agitation speed 150 rpm; contact time 30 min for Mn2+ and Ni2+, 30-60 min for Pb2+, and 90-180 min for Zn2+; NRCC6 biomass dosage 5.0 g/L for Ni2+ and Pb2+ and 10.0 g/L for Mn2+ and Zn2+; and initial concentration 12 mg/L of each ion in the multimetal aqueous solutions. Under these optimized conditions, the adsorption capacity for Pb2+, Ni2+, Mn2+, and Zn2+ reached 98.75, 59.25, 58.33, and 50.83%. The Langmuir isotherm was the best for describing the adsorption of Zn2+ (0.970) and Mn2+ (0.977). The Freundlich isotherm significantly giving a good fit to the adsorption of Pb2+ (0.998) while the adsorption of Ni2+ onto NRCC6 biomass can follow DKR (0.998). Furthermore, the current study revealed that Mucor sp. NRCC6 fungus is a new efficient and eco-friendly method that revealed a maximum removal of 100% for Pb2+ and Zn2+ as well as 97.39, 88.70, 78.95, 74.0, 70.22, 68.57, and 60.0% for Ni2+, Mn2+, Cd2+, Cu2+, Fe3+, As2+, and Cr6+ from the industrial wastewater, respectively.

Simultaneous Heavy Metal-Polycyclic Aromatic Hydrocarbon Removal by Native Tunisian Fungal Species

Multi-contamination by organic pollutants and toxic metals is common in anthropogenic and industrial environments. In this study, the five fungal strains Chaetomium jodhpurense (MH667651.1), Chaetomium maderasense (MH665977.1), Paraconiothyrium variabile (MH667653.1), Emmia lacerata, and Phoma betae (MH667655.1), previously isolated in Tunisia, were investigated for the simultaneous removal and detoxification of phenanthrene (PHE) and benzo[a]anthracene (BAA), as well as heavy metals (HMs) (Cu, Zn, Pb and Ag) in Kirk's media. The removal was analysed using HPLC, ultra-high performance liquid chromatography (UHPLC) coupled to a QToF mass spectrometer, transmission electron microscopy, and toxicology was assessed using phytotoxicity (Lepidium sativum seeds) and Microtox® (Allivibrio fisherii) assays. The PHE and BAA degradation rates, in free HMs cultures, reached 78.8% and 70.7%, respectively. However, the addition of HMs considerably affected the BAA degradation rate. The highest degradation rates were associated with the significant production of manganese-peroxidase, lignin peroxidase, and unspecific peroxygenase. The Zn and Cu removal efficacy was considerably higher with live cells than dead cells. Transmission electron microscopy confirmed the involvement of both bioaccumulation and biosorption processes in fungal HM removal. The environmental toxicological assays proved that simultaneous PAH and HM removal was accompanied by detoxification. The metabolites produced during co-treatment were not toxic for plant tissues, and the acute toxicity was reduced. The obtained results indicate that the tested fungi can be applied in the remediation of sites simultaneously contaminated with PAHs and HMs.

Bacillus and microalgae biofertilizers improved quality and biomass of Salvia miltiorrhiza by altering microbial communities

Objective

Biofertilizers are reliable alternatives to chemical fertilizers due to various advantages. However, the effect of biofertilizers on Salvia miltiorrhiza yield and quality and the possible mechanisms remain little known. Here, an experiment was conducted in S. miltiorrhiza field treated with two kinds of biofertilizers including Bacillus and microalgae.

Methods

A field experiment was conducted on S. miltiorrhiza of one year old. The biofertilizers were applied at six treatments: (i) control check, CK; (ii) microalgae, VZ; (iii) Bacillus, TTB; (iv) microalgae + Bacillus (1:1), VTA; (v) microalgae + Bacillus (0.5:1), VTB; (vi) microalgae + Bacillus (1:0.5), VTC. Here, high-throughput sequencing, ICP-MS and UPLC were employed to systematically characterize changes of microbial diversity and structure composition, heavy metals content and bioactive compounds, respectively.

Results

Compared to CK, root biomass increased by 29.31%-60.39% (P < 0.001). Meanwhile, bioactive compounds were higher than CK after the application of the biofertilizers, peculiarly in TTB and VTB. However, the content of Pb contents in roots significantly reduced by 46.03% and 37.58% respectively in VTC and TTB (P < 0.05). VTA application notably increased the available nitrogen content by 53.03% (P < 0.05), indicating the improvement of soil fertility. Significantly, bacterial and fungal Chao I diversity indices showed an increasing trend with biofertilizer application (P < 0.05), and biofertilizer amendment enriched the rhizosphere soil with beneficial microorganisms that have abilities on promoting plant growth (Achromobacter and Penicillium), adsorbing heavy metal (Achromobacter and Beauveria), controlling plant pathogen (Plectosphaerella, Lechevalieria, Sorangium, Phlebiopsis and Beauveria) and promoting the accumulation of metabolites (Beauveria and Phoma).

Conclusion

Bacillus and microalgae biofertilizers improved the quality and biomass of S. miltiorrhiza by altering microbial communities in soil.

Bioremoval of some heavy metals from aqueous solutions by two different indigenous fungi Aspergillus sp. AHM69 and Penicillium sp. AHM96 isolated from petroleum refining wastewater

Myco-remediation of heavy metals using indigenous fungi of different petroleum refining areas in Egypt was applied. Among the physicochemical parameters determined in these refineries effluents, the highest levels of heavy metals were recorded for the most toxic heavy metals Fe³⁺ and Co²⁺. The fungal isolates under the isolation codes AHM69 and AHM96 isolated from the mycobiome of Mostorod and Tanta refineries, respectively showed the best bioremoval efficiency toward heavy metals from the real wastewater mixture and polycyclic aromatic hydrocarbons from aqueous solutions. Based on phenotypic and genotypic analysis they were identified as Aspergillus sp. AHM69 and Penicillium sp. AHM96. The optimum conditions for the best bioremoval of Fe³⁺ and Co²⁺ from aqueous solutions by Aspergillus sp. AHM69 were live biomass, temperature 45–55 °C, pH 4.5–5.0, contact time 180 min, metal concentration equal to 1000 and 400 mg/L of Fe³⁺ and Co²⁺ with live fungal biomass dose of 0.5% and 0.4% with Fe³⁺ and Co²⁺, respectively. Concerning to the biomass of Penicillium sp. AHM96, the optimum operation conditions for the best removal of Fe³⁺ and Co²⁺ were 45 °C, pH 5.0 and 400 mg/L of Fe³⁺ with 1.0% biosorbent dosage or 1000 mg/L of Co²⁺ with 0.5% biosorbent dosage for 180 min as process time. Furthermore, FTIR analysis showed masking, shifting, creating and absenting of different functional groups in the fungal biomass surface of AHM96 and AHM69 strains in the presence of Fe³⁺ and Co²⁺ compared to unloaded biomasses. Microscopy with Energy Dispersive X-ray analysis (SEM-EDX) indicated that the removal of Fe³⁺ and Co²⁺ by fungi AHM69 and AHM96 was via biosorption and bioaccumulation on the biomass surface. Our results suggested that in the near future, fungal treatment is likely to outperform and replace other chemical and biological treatments in industrial wastewater treatment for oil refining.

An investigation on lead removal with newly isolated Backusella circina

In this study, the Pb(II) biosorption performance of newly isolated fungal strain, used as a biosorbent, was analyzed. Fungal strain was identified as Backusella circina according to the internal transcribed spacer (ITS) region. Following Pb(II) biosorption, Fourier-transform infrared spectroscopy was performed to compare pristine and Pb(II) biosorped biomass. The effects of pH, fungal biomass amount, temperature, interfering metal ions, initial concentration of Pb(II) and contact time on biosorption performance of B. circina were examined to optimize the biosorption conditions from aqueous solutions. It was observed that optimum Pb(II) biosorption was performed at pH 6.0. Maximum Pb(II) biosorption capacity was found to be 30.69 at 50 mg/L initial concentration of Pb(II) and equilibrium was established after 60 min. It was indicated that the equilibrium data were better fitted to Langmuir isotherm model and it is better to interpret the kinetic data by the pseudo-second-order model. The competitive Pb(II) biosorption capacity was found to be increased in the presence of co-existing metal ions. To the best of knowledge from related literature, Pb(II) biosorption performance of B. circina has not been reported in advance. In conclusion, Pb(II) biosorption performance of B. circina was revealed as an efficient biosorbent in terms of no requirement of modification, ease of preparation and low cost obtainability.

Deciphering Cadmium (Cd) Tolerance in Newly Isolated Bacterial Strain, Ochrobactrum intermedium BB12, and Its Role in Alleviation of Cd Stress in Spinach Plant (Spinacia oleracea L.)

A cadmium (Cd)-tolerant bacterium Ochrobactrum intermedium BB12 was isolated from sewage waste collected from the municipal sewage dumping site of Bhopal, India. The bacterium showed multiple heavy metal tolerance ability and had the highest minimum inhibitory concentration of 150 mg L-1 of Cd. Growth kinetics, biosorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared (FTIR) spectroscopy studies on BB12 in the presence of Cd suggested biosorption as primary mode of interaction. SEM and TEM studies revealed surface deposition of Cd. FTIR spectra indicated nitrogen atom in exopolysaccharides secreted by BB12 to be the main site for Cd attachment. The potential of BB12 to alleviate the impact of Cd toxicity in spinach plants (Spinacia oleracea L.) var. F1-MULAYAM grown in the soil containing Cd at 25, 50, and 75 mg kg-1 was evaluated. Without bacterial inoculation, plants showed delayed germination, decrease in the chlorophyll content, and stunted growth at 50 and 75 mg kg-1 Cd content. Bacterial inoculation, however, resulted in the early germination, increased chlorophyll, and increase in shoot (28.33%) and root fresh weight (72.60%) at 50 mg kg-1 of Cd concentration after 75 days of sowing. Due to bacterial inoculation, elevated proline accumulation and lowered down superoxide dismutase (SOD) enzyme activity was observed in the Cd-stressed plants. The isolate BB12 was capable of alleviating Cd from the soil by biosorption as evident from significant reduction in the uptake/translocation and bioaccumulation of Cd in bacteria itself and in the plant parts of treated spinach. Potential PGP prospects and heavy metal bioremediation capability of BB12 can make the environmental application of the organism a promising approach to reduce Cd toxicity in the crops grown in metal-contaminated soils.

Iron stress response and bioaccumulation potential of three fungal strains isolated from sewage-irrigated soil

AIMS

Contamination with heavy metal (HM) is a severe environmental issue. Therefore, there is a pressing need to create environmentally safe and cost-effective HM bioremediation approaches.

METHODS AND RESULTS

Three iron-tolerant fungal strains were isolated from sewage-irrigated soils, molecularly identified and deposited in the GenBank as Aspergillus flavus MT639638, A. terreus MT605370 and Fusarium oxysporum MT605399. The fungal growth, minimum inhibitory concentration (MIC), tolerance index (TI), removal efficiency, bioaccumulation, and enzymatic and non-enzymatic antioxidants were determined. Based on MIC values, A. flavus MT639638 was the most resistant strain. F. oxysporum displayed the highest percent removal efficiency (93.65% at 4000 mg L^-1 ) followed by A. flavus (92.92%, at 11,000 mg L^-1 ), and A. terreus (91.18% at 3000 mg L^-1 ). F. oxysporum was selected based on its highly sensitivity for further characterization of its response to Fe(II) stress using TEM, SEM and EDX, in addition to HPLC analysis of organic acids. These analyses demonstrated the localization of bioaccumulated Fe(II) and ultrastructural changes induced by iron and indicated induction release of organic acids.

CONCLUSIONS

Our fungal strains showed an effective capacity for removal of Fe(II) via bioaccumulation and biosorption mechanisms which were supported by instrumental analyses. The iron tolerance potentiality was mediated by induction of selected antioxidative enzymes and biomolecules.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study depicts a potential utilization of the three fungal strains for the bioremediation of iron-contaminated soils.

Antimicrobial and dye degradation application of fungi-assisted silver nanoparticles and utilization of fungal retentate biomass for dye removal

The present study utilized Aspergillus spp. for the synthesis of silver nanoparticles (AgNPs); the developed AgNPs were categorized using analytical techniques, that is, ultraviolet-visible (UV-vis) spectrophotometer, Zeta-potential, dynamic light scattering (DLS), and transmission electron microscopy (TEM). A sharp peak of 463 nm highlighted the synthesis of AgNPs; further Zeta-potential of -16 mV indicates stability of synthesized AgNPs. The TEM micrograph showed spherical and hexagonal shapes of synthesized AgNPs of 6-25 nm. The photocatalytic activity of fungal-mediated AgNPs was evaluated for degradation of reactive yellow dye in the concentration range of 20-100 mg L^-1 . The results showed efficient degradation of dye using AgNPs in short span of time. For antibacterial activity, synthesized AgNPs, antibiotic, and AgNPs + antibiotic were tested. As per results, the zone of inhibition (ZOI) of AgNPs showed the values of 13 and 10 mm for Escherichia coli and Staphylococcus aureus, respectively. Further, the ZOI of penicillin highlighted the values of 18 and 17 mm for E. coli and S. aureus, respectively. When AgNPs and penicillin were used in combination, a clear synergistic effect was observed; the ZOI showed 0.49- and 0.36-fold increase in area against E. coli and S. aureus, respectively, in comparison with penicillin or AgNPs alone. Further, the leftover biomass (retentate biomass) was used to decolorize the reactive yellow dye at different initial concentration ranging from 20 to 100 mg L^-1 . It was observed that 1 g L^-1 retentate biomass (B_R ) can effectively remove 82%-100% dye at 20 and 100 mg L^-1 initial dye concentration. Results also indicated that with increase in initial reactive dye concentration from 20 to 100 mg L^-1 , the decolorization capacity of retentate biomass (B_R ) (at 0.2 g L^-1 ) decreased from 79.2% to 32.3%. However, the use of AgNPs synthesized leftover fungal biomass can be a good option for up taking the additional dyes/contaminants, and also as leftover biomass can be utilized effectively, it can prove to be an excellent approach for environment safety. As the literature studies did not mentioned the further use of retentate biomass, the present study provides an excellent approach for further research on this aspect. PRACTITIONER POINTS: Synthesis of AgNPs from Aspergillus spp. and characterized with the help of a U.V-vis spectrophotometer, a zeta potential, DLS and TEM. The developed AgNPs were used for antibacterial and dye degradation activity. The left over (retentate) fungal biomass was used further for additional dye degradation activity.

Assessing the bacterial diversity and functional profiles of the River Yamuna using Illumina MiSeq sequencing

A small percentage of the total freshwater on Earth is represented by river water. Microbes have an essential role to play in the biogeochemical cycles, mineralization of organic water, along with xenobiotics degradation. Microbial dynamics are susceptible to environmental stressors which includes pollutants such as antibiotics, metals, and other degradants. River Yamuna is polluted extensively by domestic and industrial wastes. Xenobiotics, when released into the environment, can lead to water pollution. The present study evaluates the microbial diversity in Yamuna River (28°40'5.53'' N, 77°15'0.35'' E) along with the prediction of the metagenome function. In this context, the metagenomic DNA was extracted and sequencing was done on Illumina@MiSeq platform. The total number of OTUs picked was 41,994, out of which 74% were classified within the kingdom Bacteria. 35% of the OTUs were assigned to phylum Proteobacteria, followed by Bacteriodetes (22%), whereas 26% of OTUs were unassigned. PICRUSt (Phylogenetic Investigation of Communities by Reconstruction of Unobserved States) was used to predict metagenomic functions using 16S rDNA as a marker. Metagenomic reads were assigned to the Kyoto Encyclopedia of Genes and Genomes (KEGG), Cluster of Orthologous (COG), and Gene Ontology (GO). Functional characterization reveals the presence of methyl-accepting chemotaxis protein which is an important adaptation for the microbes in the environment. The enzymes can be mapped for the bioremediation of xenobiotics. Information obtained from the amplicon sequencing of River Yamuna, collaborated with "omic" studies, may help in the design of bioremediation strategies and can be used for environmental clean-up of pollutants.

Present applications of titanium dioxide for the photocatalytic removal of pollutants from water: A review

The evolution of modern technology and industrial processes has been accompanied by an increase in the utilization of chemicals to derive new products. Water bodies are frequently contaminated by the presence of conventional pollutants such as dyes and heavy metals, as well as microorganisms that are responsible for various diseases. A sharp rise has also been observed in the presence of new compounds heretofore excluded from the design and evaluation of wastewater treatment processes, categorized as "emerging pollutants". While some are harmless, certain emerging pollutants possess the ability to cause debilitating effects on a wide spectrum of living organisms. Photocatalytic degradation has emerged as an increasingly popular solution to the problem of water pollution due to its effectiveness and versatility. The primary objective of this study is to thoroughly scrutinize recent applications of titanium dioxide and its modified forms as photocatalytic materials in the removal and control of several classes of water pollutants as reported in literature. Different structural modifications are used to enhance the performance of the photocatalyst such as doping and formation of composites. The principles of these modifications have been scrutinized and evaluated in this review in order to present their advantages and drawbacks. The mechanisms involved in the removal of different pollutants through photocatalysis performed by TiO2 have been highlighted. The factors affecting the mechanism of photocatalysis and those affecting the performance of different TiO2-based photocatalysts have also been thoroughly discussed, thereby presenting a comprehensive view of all aspects involved in the application of TiO₂ to remediate and control water pollution.

An overview on heavy metal resistant microorganisms for simultaneous treatment of multiple chemical pollutants at co-contaminated sites, and their multipurpose application

Anthropogenic imbalance of chemical pollutants in environment raises serious threat to all life forms. Contaminated sites often possess multiple heavy metals and other types of pollutants. Elimination of chemical pollutants at co-contaminated sites is imperative for the safe ecosystem functions, and simultaneous removal approach is an attractive scheme for their remediation. Different conventional techniques have been applied as concomitant treatment solution but fall short at various parameters. In parallel, use of microorganisms offers an innovative, cost effective and ecofriendly approach for simultaneous treatment of various chemical pollutants. However, microbiostasis due to harmful effects of heavy metals or other contaminants is a serious bottleneck facing remediation practices in co-contaminated sites. But certain microorganisms have unique mechanisms to resist heavy metals, and can act on different noxious wastes. Considering this significant, my review provides information on different heavy metal resistant microorganisms for bioremediation of different chemical pollutants, and other assistance. In this favour, the integrated approach of simultaneous treatment of multiple heavy metals and other environmental contaminants using different heavy metal resistant microorganisms is summarized. Further, the discussion also intends toward the use of heavy metal resistant microorganisms associated with industrial and environmental applications, and healthcare. PREFACE: Simultaneous treatment of multiple chemical pollutants using microorganisms is relatively a new approach. Therefore, this subject was not well received for review before. Also, multipurpose application of heavy metal microorganisms has certainly not considered for review. In this regard, this review attempts to gather information on recent progress on studies on different heavy metal resistant microorganisms for their potential of treatment of co-contaminated sites, and multipurpose application.

Synthesis and characterization of eco-friendly cellulose beads for copper (II) removal from aqueous solutions

In this study, novel cellulose-bead-based biosorbents (CBBAS) were successfully synthesized from almond shell using a simple three-step process: (i) dissolution of bleached almond shell in ionic liquid (1-butyl-3-methylimidazolium chloride), (ii) coagulation of cellulose-ionic liquid solution in water and (iii) freeze-drying. Their morphological, structural and physicochemical properties were thoroughly characterized. These biomaterials exhibited a 3D-macroporous structure with interconnected pores, which provided a high number of adsorption sites. It should be noted that CBBAS biosorbents were efficiently employed for the removal of copper (II) ions from aqueous solutions, showing high adsorption capacity: 128.24 mg g^-1. The biosorption equilibrium data obtained were successfully fitted to the Sips model and the kinetics were suitably described by the pseudo-second-order model. Besides, CBBAS biosorbents can be easily separated from the solution for their subsequent reuse, and thus, they represent a method for the removal of copper (II) from aqueous solutions that is not only eco-friendly but also economical.

Multiple heavy metal tolerance and removal by an earthworm gut fungus Trichoderma brevicompactum QYCD-6

Fungal bioremediation is a promising approach to remove heavy-metal from contaminated water. Present study examined the ability of an earthworm gut fungus Trichoderma brevicompactum QYCD-6 to tolerate and remove both individual and multi-metals. The minimum inhibitory concentration (MIC) of heavy metals [Cu(II), Cr(VI), Cd(II) and Zn(II)] against the fungus was ranged 150–200 mg L⁻¹ on composite medium, and MIC of Pb(II) was the highest with 1600 mg L⁻¹ on potato dextrose (PD) medium. The Pb(II) presented the highest metal removal rate (97.5%) which mostly dependent on bioaccumulation with 80.0%, and synchronized with max biomass (6.13 g L⁻¹) in PD medium. However, on the composite medium, the highest removal rate was observed for Cu(II) (64.5%). Cellular changes in fungus were reflected by TEM analysis. FTIR and solid-state NMR analyses indicated the involvement of different functional groups (amino, carbonyl, hydroxyl, et al.) in metallic biosorption. These results established that the earthworm-associated T. brevicompactum QYCD-6 was a promising fungus for the remediation of heavy-metal wastewater.

Application of Beauveria bassiana spore waste as adsorbent to uptake acid red 97 dye from aqueous medium

The adsorption of acid red 97 dye (RED 97) by the waste of the filamentous fungus Beauveria bassiana was analyzed. The adsorbent was obtained as a waste of a fermentative process, and characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffractometry (XRD), and specific surface area (BET). After the characterization, adsorption tests were carried out to determine the ideal conditions of pH, adsorbent mass, and contact time for the process. Adsorption isotherms, thermodynamic studies, and the treatment of textile effluent were also investigated. The adsorbent characterization allowed the visualization of its amorphous structure, with irregular and heterogeneous particles. The pore diameter was 51.9 nm and the surface area was 0.247 m² g^-1. 1.2 g L^-1 of the adsorbent and pH of 2.0 were the ideal conditions for RED 97 adsorption. The pseudo-second-order kinetic model was the most appropriate to represent the experimental data, being the equilibrium reached in about 110 min. The Langmuir model was the most suitable to represent the equilibrium data, with maximum adsorption capacity of 194.1 mg g^-1 at 45 °C. The adsorption processes was thermodynamically spontaneous, favorable, and exothermic. In the treatment of a real textile effluent, 5 g L^-1 of the spores was capable to decolorize 70% of the solution. Therefore, spore wastes of Beauveria bassiana were promising for RED 97 adsorption.

Properties of Phosphorus-Slag-Based Cementitious Pastes for Stabilizing Lead

The properties and curing mechanism of leaded samples solidified with phosphorous-slag-based cementitious pastes are studied. The compressive strength, pH of percolate, and lead-ion concentrations of leaded samples stabilized with the phosphorous-slag-based cementitious pastes and cement were analyzed. Results confirmed that the phosphorous-slag-based cementitious paste performed much better than cement in terms of solidifying lead. The cured form of lead with phosphorous-slag-based cementitious pastes had higher compressive strength, lower lead leaching, and smaller change in pH. Higher lead content corresponded with more obvious advantagees of phosphorus-slag-based cementitious pastes and lower risk of environmental pollution. By means of X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and Energy Dispersive Spectrometer-Scanning Electron Microscope (EDS-SEM) analyses, we found that the hydration of phosphorus-slag-based cementitious pastes produced hydrated calcium silicate gels, ettringite and other minerals with large specific surface areas, as well as some leaded products that can combine with lead ions to form chemically stable leaded products. This finding well explained the high performance of phosphorus-slag-based cementitious pastes in terms of lead solidification and stabilization.

Removal of Pb(ii) and Cd(ii) from wastewater using arginine cross-linked chitosan-carboxymethyl cellulose beads as green adsorbent

A one pot approach has been explored to synthesize crosslinked beads from chitosan (CS) and carboxymethyl cellulose (CM) using arginine (ag) as a crosslinker. The synthesized beads were characterized by FTIR, SEM, EDX, XRD, TGA and XPS analysis. The results showed that CS and CM were crosslinked successfully and the obtained material (beads) was analyzed for adsorption of Cd(ii) and Pb(ii) by using batch adsorption experiments; parameters such as temperature, contact time, pH and initial ion concentration were studied. Different kinetic and thermodynamic models were used to check the best fit of the adsorption data. The results revealed that the kinetics data of the adsorption of Pb(ii) and Cd(ii) ions shows the best fit with the pseudo second order model whereas the thermodynamics data shows the best fit with the Langmuir isotherm with maximum adsorption capacities of 182.5 mg g-1 and 168.5 mg g-1 for Pb(ii) ions Cd(ii) ions, respectively. For the recovery and the regeneration after the one use of the beads, several adsorption-desorption cycles were carried out to check the reusability and recovery of both the metal ion and the adsorbent without the loss of maximum adsorption efficiency.