Photocatalytic porcelain grés large slabs digitally coated with AgNPs-TiO2

New Method for Photoactive Cement Preparation-Selected Mechanical Properties and Photocatalytic Activity of New Materials

In this study, a new method of obtaining photoactive cements is presented. The goal was to obtain photoactive cements using a method that could reduce the production costs. In the study, an intermediate product from the production of titanium dioxide using the sulfate method, taken from the installation before the calcination process, was used to obtain photoactive cements. Laboratory conditions corresponding to introducing this amorphous TiO2 into cement clinker during its cooling were simulated. The study shows that the temperature from 300 to 800 °C and the time of amorphous TiO2 contact with the cement clinker within 30 min is sufficient to obtain a photoactive cement. The highest photocatalytic activity was obtained for the material with 5 wt.% TiO2 content, and the method used did not cause a significant decrease in the bending and compressive strength of the new photoactive cements. The obtained materials were characterized by determining the crystal size of the TiO2, the sulfur content and the photocatalytic activity during NO decomposition under UV radiation. The bending and compressive strength were measured. The influence of the addition of photocatalysts on the beginning and end of the setting time was also investigated.

Efficient Day-and-Night NO2 Abatement by Polyaniline/TiO2 Nanocomposites

Finding innovative and highly performing approaches for NOx degradation represents a key challenge to enhance the air quality of our environment. In this study, the high efficiency of PANI/TiO₂ nanostructures in the NO₂ abatement both in the dark and under light irradiation is demonstrated for the first time. Heterostructures were synthesized by a "green" method and their composition, structure, morphology and oxidation state were investigated by a combination of characterization techniques. The results show that the unique PANI structure promotes two mechanisms for the NO₂ abatement in the dark (adsorption on the polymeric chains and chemical reduction to NO), whereas the photocatalytic behavior prevails under light irradiation, leading to the complete NOx degradation. The best-performing materials were subjected to recycling tests, thereby showing high stability without any significant activity loss. Overall, the presented material can represent an innovative and efficient night-and-day solution for NOx abatement.

Tungsten Trioxide and Its TiO2 Mixed Composites for the Photocatalytic Degradation of NOx and Bacteria (Escherichia coli) Inactivation

The increased air pollution and its impact on the environment and human health in several countries have caused global concerns. Nitrogen oxides (NO2 and NO) are principally emitted from industrial activities that strongly contribute to poor air quality. Among bacteria emanated from the fecal droppings of livestock, wildlife, and humans, Escherichia coli is the most abundant, and is often associated with the health risk of water. TiO2/WO3 heterostructures represent emerging systems for photocatalytic environmental remediation. However, the results reported in the literature are conflicting, depending on several parameters. In this work, WO3 and a series of TiO2/WO3 composites were properly synthesized by an easy and fast method, abundantly characterized by several techniques, and used for NOx degradation and E. coli inactivation under visible light irradiation. We demonstrated that the photoactivity of TiO2/WO3 composites towards NO2 degradation under visible light is strongly related to the WO3 content. The best performance was obtained by a WO3 load of 20% that guarantees limited e−/h+ recombination. On the contrary, we showed that E. coli could not be degraded under visible irradiation of the TiO2/WO3 composites.

Oxidative Inactivation of SARS-CoV-2 on Photoactive AgNPs@TiO2 Ceramic Tiles

The current SARS-CoV-2 pandemic causes serious public health, social, and economic issues all over the globe. Surface transmission has been claimed as a possible SARS-CoV-2 infection route, especially in heavy contaminated environmental surfaces, including hospitals and crowded public places. Herein, we studied the deactivation of SARS-CoV-2 on photoactive AgNPs@TiO₂ coated on industrial ceramic tiles under dark, UVA, and LED light irradiations. SARS-CoV-2 inactivation is effective under any light/dark conditions. The presence of AgNPs has an important key to limit the survival of SARS-CoV-2 in the dark; moreover, there is a synergistic action when TiO₂ is decorated with Ag to enhance the virus photocatalytic inactivation even under LED. The radical oxidation was confirmed as the the central mechanism behind SARS-CoV-2 damage/inactivation by ESR analysis under LED light. Therefore, photoactive AgNPs@TiO₂ ceramic tiles could be exploited to fight surface infections, especially during viral severe pandemics.

Toward Scaling-Up Photocatalytic Process for Multiphase Environmental Applications

Recently, we have witnessed a booming development of composites and multi-dopant metal oxides to be employed as novel photocatalysts. Yet the practical application of photocatalysis for environmental purposes is still elusive. Concerns about the unknown fate and toxicity of nanoparticles, unsatisfactory performance in real conditions, mass transfer limitations and durability issues have so far discouraged investments in full-scale applications of photocatalysis. Herein, we provide a critical overview of the main challenges that are limiting large-scale application of photocatalysis in air and water/wastewater purification. We then discuss the main approaches reported in the literature to tackle these shortcomings, such as the design of photocatalytic reactors that retain the photocatalyst, the study of degradation of micropollutants in different water matrices, and the development of gas-phase reactors with optimized contact time and irradiation. Furthermore, we provide a critical analysis of research–practice gaps such as treatment of real water and air samples, degradation of pollutants with actual environmental concentrations, photocatalyst deactivation, and cost and environmental life-cycle assessment.

Digitally Printed AgNPs Doped TiO2 on Commercial Porcelain-Grès Tiles: Synergistic Effects and Continuous Photocatalytic Antibacterial Activity

In the present study, we use commercial digitally printed ceramic tiles, functionnalized by AgNPs doped micro–TiO2, to investigate the mechanism of Ag in the continouos photocatalytic antibacterial activity. The novelty of the research lies in the attempt to understand the mechanism of Ag, supported on TiO2, able to exhibit the same antibacterial activity of a standard system containing Ag species, but here, totally embedded on the tile surface, and thus not free to move and damage the bacteria cell. UV/vis diffuse reflectance spectroscopy (DRS) of AgNPs–TiO2 tiles indicated an enhanced visible light response, wherein a new absorption band was produced around 18,000–20,000 cm−1 (i.e., in the 400–600 nm range) owing to the surface plasmon resonance (SPR) of AgNPs. The antibacterial photocatalytic experiments were conducted towards the inactivation of E. coli under solar light and indoor light. It was found that the degradation speed of E. coli in the presence of AgNPs–TiO2 tiles is solar light-intensity depending. This justifies the semiconductor behavior of the material. Furthermore, the AgNPs–TiO2 tiles exhibit a high ability for the inactivation of E. coli at a high load (104–107 colony-forming unit (CFU)/mL). Additionally, AgNPs–TiO2 tiles showed a remarkable antibacterial activity under indoor light, which confirms the good photocatalytic ability of such tiles. On the basis of the reactive oxygen species (ROS) quenching experiments, O2•− species and h+ were more reactive for the inactivation of E. coli rather than •OH species. This is because of the different lifetime (bacteria are more likely oxidized by ROS with longer lifetime); in fact, O2•− and h+ exhibit a longer lifetime compared with •OH species. The generation of H2O2 as the most stable ROS molecule was also suggested.