Removal of U(VI) by sugar-based magnetic pseudo-graphene oxide and its application to authentic groundwater using electromagnetic system

A critical review of uranium contamination in groundwater: Treatment and sludge disposal

Dissolved uranium in groundwater at high concentrations is an emerging global threat to human and ecological health due to its radioactivity and chemical toxicity. Uranium can enter groundwater by geochemical reactions, natural deposition from minerals, mining, uranium ore processing, and spent fuel disposal. Although much progress has been made in uranium remediation in recent years, most published reviews on uranium treatment have focused on specific methods, particularly adsorption. This article systematically reviews the major treatment technologies, explains their mechanism and progress of uranium removal, and compares their performance under various environmental conditions. Of all treatment methods, adsorption has received much attention due to its ease of use and adaptability under various conditions. However, salinity and competition from other ions limit its application in actual field conditions. Biosorption and bioremediation are also promising methods due to their low-cost and chemical-free operation. Strong base anion exchange resins are more effective at typical groundwater pH conditions. Advanced oxidation processes like photocatalysis produce less sludge and are effective even at low uranium concentrations. Electrocoagulation shows significantly improved performance when organic ligands are added prior to treatment. The significant advantages of membrane filtration are high removal efficiency and the ability to recover uranium. While each technology has its merits and demerits, no single technology is entirely suitable under all conditions. One major area of concern with all technologies is the need to dispose of liquid and solid waste generated after treatment safely. Future research must focus on developing hybrid and state-of-the-art technologies for effective and sustainable uranium removal from groundwater. Developing holistic management strategies for uranium removal will hinge on understanding its speciation, mechanisms of fate and transport, and socio-economic conditions of the affected areas.

Magnetic-watermelon rinds biochar for uranium-contaminated water treatment using an electromagnetic semi-batch column with removal mechanistic investigations

Biosorption using modified biochar has been increasingly adopted for the sustainable removal of uranium-contaminated from an aqueous solution. In this research study, the facile preparation and surface characteristics of magnetized biochar derived from waste watermelon rind to treat U(VI) contaminated water were investigated. The porosity, specific surface area, adsorption capacity, reusability, and stability were effectively improved after the magnetization of biochar. The kinetics and isotherm studies found that the U(VI) adsorption was rate-limiting monolayer sorption on the homogeneous surface of magnetized watermelon rind biochar (MWBC). The maximum adsorption capacity was found to be 323.56 mg of U(VI) per g of MWBC at pH 4.0 and 293 K that was higher than that of watermelon rind biochar (WBC) (135.86 mg g^-1) and other sourced biochars. The surface interaction mechanism, environmental feasibility, applicability for real-filed water treatment studied in the electromagnetic semi-batch column, and reusability of MWBC were also explored. Furthermore, salient raised the ion exchange and complexation action capacity of MWBC due to the presence of Fe oxide. The overall results indicated that MWBC was not only inexpensive and had a high removal capacity for U(VI), but it also easily enabled phase separation from an aqueous solution, with more than three times reusability at a minimum removal capacity of 99%.

Graphene-based materials for the adsorptive removal of uranium in aqueous solutions

Ground water contamination by radioactive elements has become a critical issue that can pose significant threats to human health. Adsorption is the most promising approach for the removal of radioactive elements owing to its simplicity, effectiveness, and easy operation. Among the plethora of functional adsorbents, graphene oxide and its derivatives are recognized for their excellent potential as adsorbent with the unique 2D structure, high surface area, and intercalated functional groups. To learn more about their practical applicability, the procedures involved in their preparation and functionalization are described with the microscopic removal mechanism by GO functionalities across varying solution pH. The performance of these adsorbents is assessed further in terms of the basic performance metrics such as partition coefficient. Overall, this article is expected to provide valuable insights into the current status of graphene-based adsorbents developed for uranium removal with a guidance for the future directions in this research field.

Polyvinyl Alcohol Polymer Functionalized Graphene Oxide Decorated with Gadolinium Oxide for Sequestration of Radionuclides from Aqueous Medium: Characterization, Mechanism, and Environmental Feasibility Studies

Uranium (U(VI)) and thorium (Th(IV)) ions produced by the nuclear and mining industries cause water pollution, thereby harming the environment and human health. In this study, gadolinium oxide-decorated polyvinyl alcohol-graphene oxide composite (PGO-Gd) was developed using a simple hydrothermal process to treat U(VI) and Th(IV) ions in water. The developed material was structurally characterized by highly advanced spectroscopy and microscopy techniques. The effects of pH, equilibration time and temperature on both radionuclides (U(VI) and Th(IV)) adsorption by PGO-Gd were examined. The PGO-Gd composite adsorbed both metal ions satisfactorily, with adsorption capacities of 427.50 and 455.0 mg g-1 at pH 4.0, respectively. The adsorption properties of both metal ions were found to be compatible with the Langmuir and pseudo-second-order kinetic models. Additionally, based on the thermodynamic characteristics, the adsorption was endothermic and spontaneous. Furthermore, the environmental viability of PGO-Gd and its application was demonstrated by studying its reusability in treating spiked surface water. PGO-Gd shows promise as an adsorbent in effectively removing both radionuclides from aqueous solutions.

Engineered Magnetic Carbon-Based Adsorbents for the Removal of Water Priority Pollutants: An Overview

This review covers the preparation, characterization, and application of magnetic adsorbents obtained from carbon-based sources and their application in the adsorption of both inorganic and organic pollutants from water. Different preparation routes to obtain magnetic adsorbents from activated carbon, biochar, hydrochar, graphene, carbon dots, carbon nanotubes, and carbon nanocages, including the magnetic phase incorporated on the solid surface, are described and discussed. The performance of these adsorbents is analyzed for the removal of fluoride, arsenic, heavy metals, dyes, pesticides, pharmaceuticals, and other emerging and relevant water pollutants. Properties of these adsorbents and the corresponding adsorption mechanisms have been included in this review. Overall, this type of magnetic adsorbents offers an alternative for facing the operational problems associated to adsorption process in water treatment. However, some gaps have been identified in the proper physicochemical characterization of these adsorbents, the development of green and low-cost preparation methods for their industrial production and commercialization, the regeneration and final disposal of spent adsorbents, and their application in the multicomponent adsorption of water pollutants.

Design of novel CNT/RGO/ZIF-8 ternary hybrid structure for lightweight and highly effective microwave absorption

Carbon-nanotube-based composites are highly desirable for addressing the difficulties relevant to the quality of electromagnetic wave absorbers. The introduction of lightweight nanocomposites for constructing new structures has been widely studied due to the transformation in impedance matching and attenuation. In this paper, a novel carbon nanotube-graphene oxide-zeolitic imidazolate framework-8 (CNT/RGO/ZIF-8) ternary hybrid structure was successfully fabricated by a facile solvothermal process. The ZIF-8 was entangled initially by carbon nanotubes via the π-π interaction between organic ligands and benzene ring structure in CNT. Then, the CNT/ZIF-8 composite was immobilized on the surface of RGO by interacting with the active functional group of RGO. The structure and performance for CNT, CNT/ZIF-8, and CNT/RGO/ZIF-8 were compared to investigate the interaction mechanisms between components, and CNT/ZIF-8 exhibited a distinct improvement for microwave absorption performance. Furthermore, the introduction of RGO can accelerate the amelioration of absorption characteristics. The interfacial bonding between CNT, RGO, and ZIF-8 exerts a great influence on the absorbing quality. The mechanism of absorption of electromagnetic waves was explained by the synergistic effects of conduction loss, polarization behaviors, and eddy current. The unique structure could offer new insights to exploit advanced microwave-absorption materials.

Removal of Copper from Mining Wastewater Using Natural Raw Material—Comparative Study between the Synthetic and Natural Wastewater Samples

The intent in this paper is to define how the batch equilibrium results of copper removal from a synthetic solution on natural zeolite can be used for prediction of the breakthrough curves in the fixed-bed system for both a synthetic solution and wastewater. Natural zeolite from the Vranjska Banja deposit, Serbia, has been fully characterized (XRD, chemical composition, DTA/TG, SEM/EDS) as a clinoptilolite with cation exchange capacity of 146 meq/100 g. The maximum adsorption capacity (qm) in the batch of the mono-component system (synthetic copper solution) obtained using the Langmuir isotherm model was 7.30 and 6.10 mg/g for particle size below 0.043 and 0.6–0.8 mm, respectively. Using the flow-through system with the 0.6–0.8 mm zeolite fixed-bed, almost double the adsorption capacity (11.2–12.2 mg/g) has been achieved in a saturation point for the copper removal from the synthetic solution, compared to the batch. Better results are attributed to the constant high concentration gradient in flow-through systems compared to the batch. The complex composition of wastewater and large amounts of earth alkaline metals disturb free adsorption sights on the zeolite surface. This results in a less effective adsorption in flow-through systems with adsorption capacity in breakthrough point of 5.84 mg/g (~0.95 × qm) and in a saturation point of 7.10 mg/g (~1.15 × qm).

Preparation of aluminum sludge composite gel spheres and adsorption of U(IV) from aqueous solution

A novel three-dimensional aluminum sludge/polyvinyl alcohol/sodium alginate(AS/PA/SA) gel spheres were designed and prepared for uranium(VI) adsorption, and it overcomes the shortcomings of poor recycling of powdery aluminum sludge adsorbent and poor stability of sodium alginate. Experiments show that the P-S-AS has a good pH range for removal of uranium (4-5). Fitting experimental data with pseudo-first-order kinetic model and pseudo-second-order kinetic model shows that the adsorption of U(VI) by P-S-AS is a chemical action. The fit of the Langmuir isotherm model and Freundlich isotherm model to the experimental data found that the P-S-AS adsorbed U(VI) to a single layer. Thermodynamic analysis shows that the adsorption occurs spontaneously, and an increase in temperature is favorable for the adsorption of uranium by the P-S-AS. Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis of the P-S-AS before and after adsorption showed that the main adsorption mechanism was the complexation reaction between functional groups and U(VI), the bonding reaction between metal oxides and U(VI).

Comparative adsorption capabilities of rubbish tissue paper-derived carbon-doped MgO and CaCO3 for EBT and U(VI), studied by batch, spectroscopy and DFT calculations

Water pollution due to organic dyes and radionuclides is a challenging issue to the modern world. Cheap and efficient adsorbents are needed for their removal from wastewaters. Carbon-doped magnesium oxide (C-MgO) and calcium carbonate (C-CaCO₃) were synthesized by the in situ hydrothermal treatment of Mg(OH)₂ and Ca(OH)₂ with carbon, and applied for the removal of eriochrome black T (EBT) at pH = 2.0 and uranium (U(VI)) at pH = 6.0. The Langmuir monolayer adsorption capacities of C-MgO (3.62 × 10^-4 mol/g for EBT and 8.10 × 10^-4 mol/g for U(VI)) were higher than those of C-CaCO₃ (2.53 × 10^-4 mol/g for EBT and 5.92 × 10^-4 mol/g for U(VI)). The high adsorption capacity of C-MgO was also evidenced with DFT calculations which showed that the sorption energies (ΔE) of C-MgO for EBT (20.62 kcal/mol) and U(VI) (63.41 kcal/mol) were higher than those of C-CaCO₃ for EBT (10.21 kcal/mol) and U(VI) (34.29 kcal/mol). In all cases, the electrostatic interactions were involved in the adsorption process. The sorption kinetic data followed pseudo-second-order kinetics. The results demonstrate that both C-MgO and C-CaCO₃ are reusable and can be effectively applied for the elimination of EBT and U(VI) from wastewater.

Green Activated Magnetic Graphitic Carbon Oxide and Its Application for Hazardous Water Pollutants Removal

Graphitic carbon oxide (GCO) and magnetic graphitic carbon oxide (MGCO) were prepared from sugar via optimized green activation by employing ozone oxidation, and applied to wastewater treatment. The maximal oxidation and adsorption yield of pollutants were achieved at pH 2.0−4.0, which is the optimized pH for ozone oxidation of GC to generate GCO. As-prepared GCO and MGCO were characterized using X-ray, infrared, and microscopic techniques. The MGCO has enough saturation magnetization (MS) of 41.38 emu g−1 for separation of the sorbent from the reaction medium by applying an external magnetic field. Batch adsorption of radioactive and heavy metals (Th(IV), Pb(II)), and a dye (methylene blue (MB)) using GCO and MGCO was evaluated by varying the adsorbent dose, equilibrium pH, contact time, initial metal and dye concentrations, and kinetics and isotherms. Adsorption kinetics and isotherm studies indicated that Th(IV), Pb(II), and MB adsorption were best described by pseudo-second-order kinetics and Langmuir isotherm with R2 (correlation coefficient) > 0.99, respectively. The maximum adsorption capacities for Th(IV), Pb(II), and MB were 52.63, 47.39, and 111.12 mg g−1 on GCO and 76.02, 71.94, and 76.92 mg g−1 on MGCO. GCO and MGCO are prospectively effective and low-cost adsorbents for ion removal in wastewater treatment. As prepared MGCO can be reused up to three cycles for Th(IV), Pb(II), and MB. This work provides fundamental information about the equilibrium adsorption isotherms and mechanisms for Th(IV), Pb(II), and MB on GCO and MGCO.