Carbon-based magnetic nanocomposite as catalyst for persulfate activation: a critical review

Heat induced superfast diclofenac removal in Cu(II)-activated peracetic acid system: Mediation from non-radical to radical pathway

A Cu(II)/heat coactivated peracetic acid (PAA) system for enhancing diclofenac (DCF) degradation was proposed in this work. The superiority of this synergetic activation strategy for PAA, working reactive species, catalytic mechanism and effects of reaction parameters on DCF elimination in this system were simultaneously investigated. Based on our results, the DCF loss rate in Cu(II)-heat/PAA process at pH 8.0 was about 49.3 and 4.2 times of that in Cu(II)/PAA and heat/PAA processes, respectively. Increasing the reaction temperature to 60 оC not only motivated the conversion of Cu(II) to Cu(I) but also facilitated the one-electron transfer between Cu(I) and PAA, boosting the generation of radicals. Organic radicals (mainly CH3C(O)O• and CH3C(O)OO•) were evidenced to be the core oxidizing substances dominating in the destruction of DCF while hydroxyl radical (•OH) made a minor contribution in this system by electron paramagnetic resonance (EPR) method together with scavenging experiments. This study broads the eyes into enhanced PAA activation initiated by homogenous Cu(II), providing a simple but efficient tool to degrade micropollutants.

Applications of Carbon-Based Materials in Activated Peroxymonosulfate for the Degradation of Organic Pollutants: A Review

In recent years, water pollution has posed a serious threat to aquatic organisms and humans. Advanced oxidation processes (AOPs) based on activated peroxymonosulfate (PMS) show high oxidation, good selectivity, wide pH range and no secondary pollution in the removal of organic pollutants in water. Carbon-based materials are emerging green catalysts that can effectively activate persulfates to generate radical and non-radical active species to degrade organic pollutants. Compared with transition metal catalysts, carbon-based materials are widely used in SR-AOPs because of their low cost, non-toxicity, acid and alkali resistance, large specific surface area, and scalable surface charge, which can be used for selective control of specific water pollutants. This paper mainly presents several carbon-based materials used to activate PMS, including raw carbon materials and modified carbon materials (heteroatom-doped and metal-doped), analyzes and summarizes the mechanism of activating PMS by carbon-based catalysts, and discusses the influencing factors (temperature, pH, PMS concentration, catalyst concentration, inorganic anions, inorganic cations and dissolved oxygen) in the activation process. Finally, the future challenges and prospects of carbon-based materials in water pollution control are also presented.

Synergistic activation of persulfate by FeS@SBA-15 for imidacloprid degradation: Efficiencies, activation mechanism and degradation pathways

In this work, FeS supported SBA-15 mesoporous silica catalyst (FeS@SBA-15) was synthesized successfully, characterized and first applied to persulfate (PS) activation for the degradation of imidacloprid in wastewater. The as-prepared 3.5-FeS@SBA-15 presented an impressive imidacloprid removal efficiency of 93.1% and reaction stoichiometric efficiency (RSE) of 1.82% after 5 min, ascribed to the synergetic effects of improved FeS dispersion and abundant surface sites by SBA-15. Electron paramagnetic resonance spectra and quenching experiments proved that both SO4·- and ·OH were produced in FeS@SBA-15/PS system, and SO4·- played a dominant role in the degradation process. The S2- can accelerate the cycling of Fe(III)/Fe(II) during activation and increase the steady-state concentration of Fe(II). More importantly, the constructed heterogeneous system exhibited an efficient and stable catalytic activity over a wide range of pH (3.0-9.0), temperature (283K-313K), inorganic ion (NO3-) and humic acid (1-20 mg/L). Moreover, the density functional theory calculations were conducted to predict the potential reaction sites of imidacloprid. Based on eighteen identified intermediates, four main degradation pathways were proposed: hydroxylation, dechlorination, hydrolysis, and the ring cleavage of the imidazolidine. ECOSAR analysis indicated hydroxylation and dechlorination played a key role in the detoxification of the formed compounds. These findings would provide new insights into the application of FeS@SBA-15 catalyst in wastewater treatment and the removal mechanism of imidacloprid from wastewater.

A persulfate oxidation system for removing acid orange from aqueous solution: Evaluation and degradation mechanism

Peroxymonosulfate-based advanced oxidation (PMS-AOP) is a promising technology for the degradation of environmental pollutants. PMS can be activated by various transition metals, especially cobalt-based catalysts, but pure cobalt catalyst suffers from severe metal leakage and poor cyclicality. This study synthesized NiCo₂O₄ using a co-precipitation hydrothermal method. The structures, morphologies, and chemical states of the prepared catalysts were hexagonal sheet structures. The activation of PMS by catalyst (NiCo₂O₄) is investigated in a PMS/carbonate (PC) system for Orange II degradation. The observed pseudo-first-order rate constants (k₁) were assessed by the effects of different water matrices and operation conditions. The results show that k_obs with NiCo₂O₄ were increased by 13 times than that of treatment without NiCo₂O₄. This was mainly due to Co³⁺ and Ni³⁺ act as electron acceptors to capture electrons from the PMS/PC system, forming a good redox cycle with HSO₅^-/SO₅^- and oxidizing Co²⁺/Ni²⁺ to produce a large amount of more active components (e.g., ¹O₂ and SO₄^⋅-). The good reusability and high stability of NiCo₂O₄ were demonstrated by five recycle tests. These results suggest that the NiCo₂O₄/PC system is an efficient and stable method of pollution remediation.

Activation of persulfate for highly efficient degradation of metronidazole using Fe(II)-rich potassium doped magnetic biochar

The content of active components in magnetic biochar, especially Fe(II), is closely related to its activation performance. Therefore, improving Fe(II) content in magnetic biochar is an ideal strategy to enhance the activation performance of magnetic biochar. In this study, the potassium-doped magnetic biochar was prepared and employed to activate persulfate for degradation of metronidazole. The degradation efficiency of metronidazole in potassium-doped magnetic biochar/persulfate system was 98.4%, which was 13.1 times higher than that in magnetic biochar/persulfate system. Free radicals quenching experiments and electron spin resonance analyses confirmed that surface-bound free radicals were responsible for metronidazole degradation followed the order of ¹O₂ > ·OH > SO₄·^- > O₂·^-. The doping of magnetic biochar with potassium increased its Fe(II) content, approximately 3.1 times higher than that of pristine magnetic biochar. The differences in Fe(II) content between potassium-doped magnetic biochar and magnetic biochar were the key reasons for the activation performance differences. Based on the ultra-high pressure liquid chromatography-quadrupole tandem time-of-flight mass spectrometer, the primary degradation intermediates of metronidazole were identified, and possible degrading pathways were proposed. Overall, this work provides an effective strategy to improve the activation performance of magnetic biochar.

Carbon and polymer-based magnetic nanocomposites for oil-spill remediation-a comprehensive review

Oil spills are a major contributor to water contamination, which sets off a significant impact on the environment, biodiversity, and economy. Efficient removal of oil spills is needed for the protection of marine species as well as the environment. Conventional approaches are not efficient enough for oil-water separation; therefore, effective strategies and efficient removal techniques (and materials) must be developed to restore the contaminated marine to its normal ecology. Several research studies have shown that nanotechnology provides efficient features to clean up these oil spills from the water using magnetic nanomaterials, particularly carbon/polymer-based magnetic nanocomposites. Surface modification of these nanomaterials via different techniques render them with salient innovative features. The present review discusses the advantages and limitations of conventional and advanced techniques for the oil spills removal from wastewater. Furthermore, the synthesis of magnetic nanocomposites, their utilization in oil-water separation, and adsorption mechanisms are discussed. Finally, the advancement and future perspectives of magnetic nanocomposites (particularly of carbon and polymer-based magnetic nanocomposites) in environmental remediation are presented.

Sustainable plant and microbes-mediated preparation of Fe3O4 nanoparticles and industrial application of its chitosan, starch, cellulose, and dextrin-based nanocomposites as catalysts

Iron oxide nanoparticles (Fe₃O₄ NPs) attracted significant scientific interest, considering their immense diversity of usage and biocompatibility. Perceiving the growing importance of sustainable chemistry, many efforts have been made to prepare these NPs using naturally occurring materials mostly plant extracts and microbes. Magnetic NPs (MNPs) are commonly used as composites and are considered in two matters: synthesis and modification of their functional groups. Biopolymeric nanocomposites are a group of hybrid materials composed of natural polymers and inorganic nanomaterials. Biopolymers such as alginate, cellulose, starch, gelatin, chitosan, etc. have been considered extensively and provided composites with better electrical and mechanical thermal properties. Fe₃O₄ NPs incorporated in a polymer and biopolymer matrix is a good instance of the functional nanostructure, which has been able to enhance the properties of both ingredients. These hybrids can have impressive applications in various scopes such as magneto-optical storage, electromagnetic interference shielding, catalyst, water remediation, biomedical sensing, and so on. In this study, we have tried to briefly introduce Fe₃O₄ NPs, investigate the green and sustainable methods that have been suggested for its synthesis and review recent utilization of their biopolymeric nanocomposite (NC) including starch, chitosan, dextrin, etc. as catalysts and photocatalysts.

Peracetic acid-based advanced oxidation processes for decontamination and disinfection of water: A review

Peracetic acid (PAA) has attracted growing attention as an alternative oxidant and disinfectant in wastewater treatment due to the increased demand to reduce chlorine usage and control disinfection byproducts (DBPs). These applications have stimulated new investigations on PAA-based advanced oxidation processes (AOPs), which can enhance water disinfection and remove micropollutants. The purpose of this review is to conduct a comprehensive analysis of scientific information and experimental data reported in recent years on the applications of PAA-based AOPs for the removal of chemical and microbiological micropollutants from water and wastewater. Various methods of PAA activation, including the supply of external energy and metal/metal-free catalysts, as well as their activation mechanisms are discussed. Then, a review on the usage of PAA-based AOPs for contaminant degradation is given. The degradation mechanisms of organic compounds and the influence of the controlling parameters of PAA-based treatment systems are summarized and discussed. Concurrently, the application of PAA-based AOPs for water disinfection and the related mechanisms of microorganism inactivation are also reviewed. Since combining UV light with PAA is the most commonly investigated PAA-based AOP for simultaneous pathogen inactivation and micropollutant oxidation, we have also focused on PAA microbial inactivation kinetics, together with the effects of key experimental parameters on the process. Moreover, we have discussed the advantages and disadvantages of UV/PAA as an AOP against the well-known and established UV/H₂O₂. Finally, the knowledge gaps, challenges, and new opportunities for research in this field are discussed. This critical review will facilitate an in-depth understanding of the PAA-based AOPs for water and wastewater treatment and provide useful perspectives for future research and development for PAA-based technologies.

Controllable preparation of magnetic carbon nanocomposites by pyrolysis of organometallic precursors, similar molecular structure but very different morphology, composition and properties

Organometallic compounds were synthesized for solid-state pyrolysis to research the structure–property relationship between the precursors and the as-generated magnetic carbon nanocomposites.