Fabrication of multi-walled carbon nanotubes and carbon black co-modified graphite felt cathode for amoxicillin removal by electrochemical advanced oxidation processes under mild pH condition

Hydrogen peroxide electrogeneration from O2 electroreduction: A review focusing on carbon electrocatalysts and environmental applications

Hydrogen peroxide (H2O2) stands as one of the foremost utilized oxidizing agents in modern times. The established method for its production involves the intricate and costly anthraquinone process. However, a promising alternative pathway is the electrochemical hydrogen peroxide production, accomplished through the oxygen reduction reaction via a 2-electron pathway. This method not only simplifies the production process but also upholds environmental sustainability, especially when compared to the conventional anthraquinone method. In this review paper, recent works from the literature focusing on the 2-electron oxygen reduction reaction promoted by carbon electrocatalysts are summarized. The practical applications of these materials in the treatment of effluents contaminated with different pollutants (drugs, dyes, pesticides, and herbicides) are presented. Water treatment aiming to address these issues can be achieved through advanced oxidation electrochemical processes such as electro-Fenton, solar-electro-Fenton, and photo-electro-Fenton. These processes are discussed in detail in this work and the possible radicals that degrade the pollutants in each case are highlighted. The review broadens its scope to encompass contemporary computational simulations focused on the 2-electron oxygen reduction reaction, employing different models to describe carbon-based electrocatalysts. Finally, perspectives and future challenges in the area of carbon-based electrocatalysts for H2O2 electrogeneration are discussed. This review paper presents a forward-oriented viewpoint of present innovations and pragmatic implementations, delineating forthcoming challenges and prospects of this ever-evolving field.

Formation of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) in the electrochemical oxidation of polluted waters with pharmaceuticals used against COVID-19

The COVID-19 pandemic has produced a huge impact on our lives, increasing the consumption of certain pharmaceuticals, and with this, contributing to the intensification of their presence in wastewater and in the environment. This situation demands the implementation of efficient remediation technologies, among them, electrochemical oxidation (ELOX) is one the most applied. This work studies the application of ELOX with the aim of eliminate pharmaceuticals used in the fight against COVID-19, assessing its degradation rate, as well as the risk of formation of toxic trace by-products, such as unintentional POPs like polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). To this end, model solutions containing 10 mg L^-1 of dexamethasone (DEX), paracetamol (PAR), amoxicillin (AMX), and sertraline (STR) with two different electrolytes (NaCl and Na₂SO₄) have been evaluated. However, electrochemical systems that contain chloride ions in solution together with PCDD/Fs precursor molecules may lead to the formation of these highly toxic by-products. So, PCDD/Fs were quantified under conditions of complete degradation of the drugs. Furthermore, the presence of PCDD/Fs precursors such as chlorophenols was determined, as well as the role of Cl^-, Cl^• and SO 4 • - radicals in the formation of the by-products and PCDD/Fs. The maximum measured concentration of PCDD/Fs was around 2700 pg L^-1 for the amoxicillin case in NaCl medium. The obtained results emphasise the importance of not underestimating the potential formation of these highly toxic trace by-products, in addition to the correct selection of oxidation processes and operation variables, in order to avoid final higher toxicity in the medium.

Efficient removal of antibiotics from water resources is a public health priority: a critical assessment of the efficacy of some remediation strategies for antibiotics in water

This review discusses the fundamental principles and mechanism of antibiotic removal from water of some commonly applied treatment techniques including chlorination, ozonation, UV-irradiation, Fenton processes, photocatalysis, electrochemical-oxidation, plasma, biochar, anaerobicdigestion, activated carbon and nanomaterials. Some experimental shortfalls identified by researchers such as certain characteristics of degradation agent applied and the strategies explored to override the identified limitations are briefly discussed. Depending on interactions of a range of factors including the type of antibiotic compound, operational parameters applied such as pH, temperature and treatment time, among other factors, all reviewed techniques can eliminate or reduce the levels of antibiotic compounds in water to varying extents. Some of the reviewed techniques such as anaerobic digestion generally require longer treatment times (up to 360, 193 and 170 days, according to some studies), while others such as photocatalysis achieved degradation within short contact time (within a minimum of 30, but up to 60, 240, 300 and 1880 minutes, in some cases). For some treatment techniques such as ozonation and Fenton, it is apparent that subjecting compounds to longer treatment times may improve elimination efficiency, whereas for some other techniques such as nanotechnology, application of longer treatment time generally meant comparatively minimal elimination efficiency. Based on the findings of experimental studies summarized, it is apparent that operational parameters such as pH and treatment time, while critical, do not exert sole or primary influence on the elimination percentage(s) achieved. Elimination efficiency achieved rather seems to be due more to the force of a combination of several factors.

A state of the art review on electrochemical technique for the remediation of pharmaceuticals containing wastewater

Pharmaceutical wastewater is a frequent kind of wastewater with high quantities of organic pollutants, although little research has been done in the area. Pharmaceutical wastewaters containing antibiotics and high salinity may impair traditional biological treatment, resulting in the propagation of antibiotic resistance genes. The potential for advanced oxidation processes (AOPs) to break down hazardous substances instead of present techniques that essentially transfer contaminants from wastewater to sludge, a membrane filter, or an adsorbent has attracted interest. Among a variety of AOPs, electrochemical systems are a feasible choice for treating pharmaceutical wastewater. Many electrochemical approaches exist now to remediate rivers polluted by refractory organic contaminants, like pharmaceutical micro-pollutants, which have become a severe environmental problem. The first part of this investigation provides the bibliometric analysis of the title search from 1970 to 2021 for keywords such as wastewater and electrochemical. We have provided information on relations between keywords, countries, and journals based on three fields plot, inter-country co-authorship network analysis, and co-occurrence network visualization. The second part introduces electrochemical water treatment approaches customized to these very distinct discarded flows, containing how processes, electrode materials, and operating conditions influence the results (with selective highlighting cathode reduction and anodic oxidation). This section looks at how electrochemistry may be utilized with typical treatment approaches to improve the integrated system's overall efficiency. We discuss how electrochemical cells might be beneficial and what compromises to consider when putting them into practice. We wrap up our analysis with a discussion of known technical obstacles and suggestions for further research.

Electrosynthesis of H2O2 through a two-electron oxygen reduction reaction by carbon based catalysts: From mechanism, catalyst design to electrode fabrication

Hydrogen peroxide (H₂O₂) is an efficient oxidant with multiple uses ranging from chemical synthesis to wastewater treatment. The in-situ H₂O₂ production via a two-electron oxygen reduction reaction (ORR) will bring H₂O₂ beyond its current applications. The development of carbon materials offers the hope for obtaining inexpensive and high-performance alternatives to substitute noble-metal catalysts in order to provide a full and comprehensive picture of the current state of the art treatments and inspire new research in this area. Herein, the most up-to-date findings in theoretical predictions, synthetic methodologies, and experimental investigations of carbon-based catalysts are systematically summarized. Various electrode fabrication and modification methods were also introduced and compared, along with our original research on the air-breathing cathode and three-phase interface theory inside a porous electrode. In addition, our current understanding of the challenges, future directions, and suggestions on the carbon-based catalyst designs and electrode fabrication are highlighted.

Progress of homogeneous and heterogeneous electro-Fenton treatments of antibiotics in synthetic and real wastewaters. A critical review on the period 2017-2021

Antibiotics are widely supplied over all the world to animals and humans to fight and heal bacteriological diseases. The uptake of antibiotics has largely increased the average-life expectancy of living beings. However, these recalcitrant products have been detected at low concentrations in natural waters, with potential health risks due to alterations in food chains and an increase in the resistance to bacterial infection, control of infectious diseases, and damage of the beneficial bacteria. The high stability of antibiotics at mild conditions prevents their effective removal in conventional wastewater treatment plants. A powerful advanced oxidation processes such as the electro-Fenton (EF) process is being developed as a guarantee for their destruction by ^•OH generated as strong oxidant. This review presents a critical, exhaustive, and detailed analysis on the application of EF to remediate synthetic and real wastewaters contaminated with common antibiotics, covering the period 2017-2021. Homogeneous EF and heterogeneous EF involving iron solid catalysts or iron functionalized cathodes, as well as their hybrid and sequential treatments, are exhaustively examined. Their fundamentals and characteristics are detailed, and the main results obtained for the removal of the most used antibiotic families are carefully described and discussed. The role of generated oxidizing agents is explained, and the by-products generated, and reaction sequences proposed are detailed.

Amplifying anti-flooding electrode to fabricate modular electro-fenton system for degradation of antiviral drug lamivudine in wastewater

The advanced oxidation based on in-situ hydrogen peroxide production using carbon air cathode is very potential for wastewater treatment. However, catalyst flooding and complex assembly patterns are the bottleneck limiting the air cathode to the long-term and large-scale application. In this work, a novel anti-flooding air-breathing cathode (ABC) was prepared by a simple rolling-spraying method with relatively low price commercial materials. The novel method changed the morphology of gas diffusion layer as well as adjusted the hydrophobicity of air side of the catalyst layer. As a result, water-air distribution management was achieved and TPI disequilibrium was prevented. Compare with traditional ABC, the H₂O₂ yield and current efficiency (CE) of optimized anti-flooding ABC (ABC_0.9) increased by 13.5% (941 ± 10 mg·L^-1·h^-1 with CE of 84% at 30 mA·cm^-2), the material cost and fabrication time decreased by 10.1% (2.32 ¥·dm^-2, ~0.36 $·dm^-2) and 40%. Amplified ABC coupled with Ti/IrO₂ anodes were integrated into a modular electrode used for H₂O₂generation. When the current density (j) increased from 10 to 30 mA·cm^-2, the energy cost increased from 0.19 to 0.43 ¥·mol^-1 H₂O₂ (from 0.03 to 0.07 $·mol^-1 H₂O₂). The modular electrode was utilized in a 2 L pre-pilot scale reactor for antiviral drug lamivudine degradation by electro-Fenton (EF) process. 100% of lamivudine and 78.1% of total organic carbon (TOC) were removed within 60 min at 20 mA·cm^-2. The susceptible sites on the lamivudine toward hydroxyl radicals were investigated and transformation products (TP) as well as degradation pathway were studied.

Polyethylene over magnetite-multiwalled carbon nanotubes for kerosene removal from water

In this study, a nano-adsorbent was prepared for kerosene removal from water. Multiwalled carbon nanotubes (MWCNTs) were functionalized with concentrated HNO₃ (nitric acid). Subsequently, Fe₃O₄ (magnetite) nanoparticles were deposited on the MWCNTs to prepare a magnetite/MWCNTs (Fe-MWCNTs) nanocomposite. Then, polyethylene was added to the Fe-MWCNTs to fabricate a polyethylene/magnetite/MWCNTs (PE/Fe-MWCNTs) novel nanocomposite. The nano-adsorbent was characterized using BET, FTIR, Raman, XRD, TEM, and SEM. A kerosene-water model mixture was used for adsorption tests. Several parameters: adsorption time, adsorbent dose, solution pH, solution temperature, and kerosene concentration in the kerosene-water model mixture, were analyzed during adsorption experiments. After each batch experiment, kerosene concentration was determined using high-performance liquid chromatography (HPLC). Magnetic field was used to remove the adsorbent after each experiment. The kerosene adsorption capacity and removal efficiency of the PE/Fe-MWCNTs nanocomposite (3560 mg/g and 71.2 %, respectively) were higher than those of Fe-MWCNTs, ox-MWCNTs, and fresh MWCNTs (3154 mg/g and 63.1 %, 2204 mg/g and 44.0 %, and 2092 mg/g and 41.8 %, respectively). Kerosene adsorption followed a pseudo-second-order kinetic model (R² = 0.999) and the Langmuir isotherm model, suggesting that adsorption was uniform and homogenous process.

Graphite felt modified by nanoporous carbon as a novel cathode material for the EF process

Nanoporous carbon prepared by carbonizing ZIF-8@MWCNTs can greatly improve the performance of graphite felt as an electro-Fenton cathode.

Cu-doped g-C3N4 catalyst with stable Cu0 and Cu+ for enhanced amoxicillin degradation by heterogeneous electro-Fenton process at neutral pH

The development of new heterogeneous Cu-based solid catalysts for hydroxyl radical (∙OH) generation plays a crucial role in degradation of pollutants at neutral pH circumstance. In this work, a Cu-doped graphitic carbon nitride (g-C₃N₄) complex was synthesized in one-step pyrolysis process using copper chloride dihydrate and dicyandiamide as precursors. The results reveal that after Cu doping, the bulk structure of g-C₃N₄ was destroyed with fragmentary morphology formation. Besides, Cu⁰ and Cu⁺ were successfully embedded in g-C₃N₄ sheet. Moreover, amoxicillin (AMX) removal by heterogeneous electro-Fenton process was performed to evaluate the catalytic activity of the Cu-doped g-C₃N₄. 99.1% AMX removal efficiency was obtained after 60 min electrolysis under neutral pH condition when the current density was 12 mA cm² and the catalyst dosage was 0.3 g L^-1. Both Cu⁰ and Cu⁺ were stably retained in the Cu-doped g-C₃N₄ catalyst and AMX removal efficiency reached 91.1%, even after 5 cycles, manifesting the remarkable stability of Cu-doped g-C₃N₄. Also, Cu-doped g-C₃N₄ possessed excellent catalytic activities for AMX removal in various waterbodies. According to the catalytic mechanism analysis, the ∙OH was proved to be the primary reactive species for AMX removal in heterogeneous electro-Fenton process. Based on the identification of sixteen different intermediate products, the possible degradation pathways were proposed. This work provides a simple method to synthesize a Cu-based solid catalyst containing stable Cu⁰ and Cu ⁺ for degradation of pollutants in wastewater.

A novel covalent triazine framework developed for efficient determination of 1-naphthol in water

Covalent triazine frameworks (CTFs) are an exciting new class of porous organic materials with excellent chemical stability and easy functionalization. In recent years, CTFs have gained increasing attention in electrochemical detection of environmental contaminants. Herein, a novel CTF material was successfully synthesized by the solvothermal condensation of 1,3,5-tris-(4-aminophenyl)triazine (TAPT) and 2,3,6,7-tetrabromonapthalene dianhydride (TBNDA) for determination of 1-naphthol in water. The obtained CTF, denoted here as TATB, comprised uniformly sized spherical particles (diameter 0.5-2 μm) with a highly conjugated structure that benefited electron transfer processes when applied to a glassy carbon electrode (GCE). A TATB/GCE working electrode showed excellent catalytic activity for the oxidation of 1-naphthol, with the oxidation peak current being directly proportional to the 1-naphthol concentration in the range of 0.01-10.0 μM, with a detection limit of 5.0 nM (S/N = 3). In addition, the TATB/GCE sensor possesses excellent reproducibility, sensitivity, and selectivity for 1-naphthol determination in aqueous solution. This work highlights the potential of CTFs in electrochemical sensing, whilst also demonstrating a sensitive and stable sensor platform for 1-naphthol detection in water.