Contaminated marine sediment stabilization/solidification treatment with cement/lime: leaching behaviour investigation

Impact of particle size separation on the stabilisation efficiency of heavy-metal-contaminated soil: a meta-analysis

The separation of heavy-metal-contaminated soil by particle size is crucial for minimising the volume of contaminated soil because of the pronounced variability in the heavy-metal distribution among different soil particle sizes. However, relevant analyses on the effect of soil particle size sorting on stabilisation are limited. Therefore, we screened 2766 peer-reviewed papers published from January 2010 to April 2022 in the Web of Science database, of which 117 met the screening requirements, and conducted a meta-analysis to explore how soil particle size sorting and the interaction between sorting particle size and soil properties affect the stabilisation of heavy metals. The results showed that: (1) For fractionations ≤0.15 mm and from 0.15-2 mm, the materials demonstrating the highest average unit stabilisation efficiency were phosphate (45.0%/%) and organic matter (59.5%/%), respectively. (2) The smaller the size of soil particles, the greater the effect of the initial pH on stabilisation efficiency. (3) Similarly, for soil organic matter, smaller particle sizes (≤0.15 mm) combined with a lower initial content (≤1%) significantly increased the heavy metal stabilisation efficiency. (4) The impact of soil particle size fractionation on unit stabilisation efficiency was observed to be similar for typical heavy metals, specifically Cd and Pb. The relationship between particle size and unit stabilisation efficiency shows an inverted U shape. Particle size sorting can affect the distribution of heavy metals, but the type of stabilisation agent should also be considered in combination with the soil properties and heavy metal types.

Solidification and utilization of municipal solid waste incineration ashes: Advancements in alkali-activated materials and stabilization techniques, a review

Researchers are actively investigating methodologies for the detoxification and utilization of Municipal Solid Waste Incineration Bottom Ash (MSWIBA) and Fly Ash (MSWIFA), given their potential as alkali-activated materials (AAMs) with low energy consumption. Recent studies highlight that AAMs from MSWIFA and MSWIBA demonstrate significant durability in both acidic and alkaline environments. This article provides a comprehensive overview of the processes for producing MSWIFA and MSWIBA, evaluating innovative engineering stabilization techniques such as graphene nano-platelets and lightweight artificial cold-bonded aggregates, along with their respective advantages and limitations. Additionally, this review meticulously incorporates relevant reactions. Recommendations are also presented to guide future research endeavors aimed at refining these methodologies.

Ex Situ Stabilization/Solidification Approaches of Marine Sediments Using Green Cement Admixtures

The routine dredging of waterways produces huge volumes of sediments. Handling contaminated dredged sediments poses significant and diverse challenges around the world. In recent years, novel and sustainable ex situ remediation technologies for contaminated sediments have been developed and applied. This review article focuses on cement-based binders in stabilizing contaminants through the stabilization/solidification (S/S) technique and the utilization of contaminated sediments as a resource. Through S/S techniques, heavy metals can be solidified and stabilized in dense and durable solid matrices, reducing their permeability and restricting their release into the environment. Industrial by-products like red mud (RM), soda residue (SR), pulverized fly ash (PFA), and alkaline granulated blast furnace slag (GGBS) can immobilize heavy metal ions such as lead, zinc, cadmium, copper, and chromium by precipitation. However, in a strong alkali environment, certain heavy metal ions might dissolve again. To address this, immobilization in low pH media can be achieved using materials like GGBS, metakaolin (MK), and incinerated sewage sludge ash (ISSA). Additionally, heavy metals can be also immobilized through the formation of silicate gels and ettringites during pozzolanic reactions by mechanisms such as adsorption, ion exchanges, and encapsulation. It is foreseeable that, in the future, the scientific community will increasingly turn towards multidisciplinary studies on novel materials, also after an evaluation of the effects on long-term heavy metal stabilization.

Site-specific response of sediment microbial community to supplementation of polyhydroxyalkanoates as biostimulants for PCB reductive dechlorination

The use of biodegradable plastics is constantly raising, increasing the likeliness for these polymers to end up in the environment. Environmental applications foreseeing the intentional release of biodegradable plastics have been also recently proposed, e.g., for polyhydroxyalkanoates (PHAs) acting as slow hydrogen releasing compounds to stimulate microbial reductive dehalogenation processes. However, the effects of their release into the environment on the ecosystems still need to be thoroughly explored. In this work, the use of PHAs to enhance the microbial reductive dechlorination of polychlorobiphenyls (PCBs) and their impact on the metabolic and compositional features of the resident microbial community have been investigated in laboratory microcosms of a polluted marine sediment from Mar Piccolo (Taranto, Italy), and compared with recent findings on a different contaminated marine sediment from Pialassa della Baiona (Ravenna, Italy). A decreased biostimulation efficiency of PHAs on PCBs reductive dechlorination was observed in the sediment from Mar Piccolo, with respect to the sediment from Pialassa della Baiona, suggesting that the sediments' physical-chemical characteristics and/or the biodiversity and composition of its microbial community might play a key role in determining the outcome of this biostimulation strategy. Regardless of the sediment origin, PHAs were found to have a specific and pervasive effect on the sediment microbial community, reducing its biodiversity, defining a newly arranged microbial core of primary degraders and consequently affecting, in a site-specific way, the abundance of subdominant bacteria, possibly cross-feeders. Such potential to dramatically change the structure of autochthonous microbial communities should be carefully considered, since it might have secondary effects, e.g., on the natural biogeochemical cycles.

Recycling of Contaminated Marine Sediment and Industrial By-Products through Combined Stabilization/Solidification and Granulation Treatment

Stabilization/solidification (S/S) is becoming increasingly important, as it allows the remediation of contaminated sediments and their recovery into materials for civil engineering. This research proposes a cement-free cold granulation process for manufactured low-cost aggregates from marine sediments contaminated with organic compounds and metals. After the chemo-physical characterization of the study materials, two mix designs were prepared in a rotary plate granulator by adding two industrial by-products as geopolymer precursors, coal fly ash (CFA) and Blast Furnace Slag (BFS), but also alkaline activation solutions, water, and a fluidizer. The results indicated that sediments treated with mix 1 (i.e., with a higher percentage of water and fluidifier) represent the optimal solution in terms of metal leachability. The metal leachability was strictly influenced by aggregates' porosity, density, and microstructure. The technical performance (such as the aggregate impact value > 30%) suggested the use of granules as lightweight aggregates for pavement construction. The results indicated that cold granulation represents a sustainable solution to recycling contaminated marine sediments, CFA, and BFS into lightweight artificial aggregates.

Immobilization of lead, copper, cadmium, nickel, and zinc in sediment by red mud: adsorption characteristics, mechanism, and effect of dosage on immobilization efficiency

The objective of this work was to determine the effect of dosage on the immobilization of lead (Pb), copper (Cu), cadmium (Cd), nickel (Ni), and zinc (Zn) in sediment by red mud (RM). To achieve this aim, the adsorption characteristics and mechanism of Pb, Cu, Cd, Ni, and Zn from aqueous solution on RM were studied at first, and then the influence of the RM dosage on the fractionation and leaching potential of Pb, Cu, Cd, Ni, and Zn in sediment was investigated. The results showed that RM possessed high adsorption capacities for Pb(II), Cu(II), Cd(II), Ni(II), and Zn(II) in aqueous solution. The maximum monolayer Pb(II), Cu(II), Cd(II), Ni(II), and Zn(II) adsorption capacities for RM derived from the Langmuir isotherm model were found to be 296, 39.2, 70.2, 46.0, and 50.7 mg/g, respectively. The addition of RM into sediment could effectively reduce the toxicity characteristic leaching procedure (TCLP)-leachable concentrations of Pb, Cu, Cd, Ni, and Zn in the sediment. The added RM could effectively immobilize the mobile (exchangeable, reducible, and oxidizable fractions) Pb in sediment by the conversion of the exchangeable and reducible fractions into the residual fraction, and it could effectively immobilize the mobile Cu, Cd, Ni, and Zn in sediment by the conversion of the exchangeable fraction into the residual fraction. The quantities of mobile Pb, Cu, Cd, and Ni immobilized by RM had a good linear relationship with the added RM. The above results suggest that RM is a promising amendment for the immobilization of mobile Pb, Cu, Cd, Ni, and Zn in sediment, and the linear relationship between the RM dosage and the quantities of immobilized Pb, Cu, Cd, and Ni by RM can be employed to determine the RM dosage required for the immobilization of mobile Pb, Cu, Cd, and Ni in sediment.

An overview of operations and processes for circular management of dredged sediments

Dredging is an essential technique to maintain proper water depths in ports and bays. Many dredged sediments are considered as toxic waste due to their significant amounts of metals and other pollutants. In consequence, they need to be treated to reduce this toxicity and avoid pollutant resuspensions. Physical operations and chemical, thermal and biological processes have been conventionally used to this aim, but the traditional linear sediment approach is often unsustainable and economically and environmentally demanding. Considering the increasing people's awareness in environmental issues, more efficient dredged sediment management schemes are required. Some authors are making significant efforts to improve circularity in sediment management processes by taking advantage of the mineral composition of sediments to obtain products for the building and road construction sectors, therefore decreasing the need of raw materials while reducing the amounts of sediments wasted to landfills. However, information related to the characteristics of these products, their mechanical behaviour and their functionality is still scarce, being sediment-based by-products developed mainly at low Technological Readiness Level (TRL), showing low global impact in the market. To implement circular economy in the dredged sediment sector, some technical and socio-political barriers must be still overcome. To this aim, further research and technological applications must be developed, with the support of decision makers and stakeholders. This review aims at giving an overview of the circular trends applied to toxic dredged sediment management, pointing at current opportunities, barriers and constraints that hinder its wide development.

Experimental Investigation on Environmentally Sustainable Cement Composites Based on Wheat Straw and Perlite

Environmentally sustainable cement mortars containing wheat straw (Southern Italy, Apulia region) of different length and dosage and perlite beads as aggregates were prepared and characterised by rheological, thermal, acoustic, mechanical, optical and microstructural tests. A complete replacement of the conventional sand was carried out. Composites with bare straw (S), perlite (P), and with a mixture of inorganic and organic aggregates (P/S), were characterised and compared with the properties of conventional sand mortar. It was observed that the straw fresh composites showed a decrease in workability with fibre length decrease and with increase in straw volume, while the conglomerates with bare perlite, and with the aggregate mixture, showed similar consistency to the control. The thermal insulation of the straw mortars was extremely high compared to the sand reference (85–90%), as was the acoustic absorption, especially in the 500–1000 Hz range. These results were attributed to the high porosity of these composites and showed enhancement of these properties with decrease in straw length and increase in straw volume. The bare perlite sample showed the lowest thermal insulation and acoustic absorption, being less porous than the former composites, while intermediate values were obtained with the P/S samples. The mechanical performance of the straw composites increased with length of the fibres and decreased with fibre dosage. The addition of expanded perlite to the mixture produced mortars with an improvement in mechanical strength and negligible modification of thermal properties. Straw mortars showed discrete cracks after failure, without separation of the two parts of the specimens, due to the aggregate tensile strength which influenced the impact compression tests. Preliminary observations of the stability of the mortars showed that, more than one year from preparation, the conglomerates did not show detectable signs of degradation.

Recent advances in PCB removal from historically contaminated environmental matrices

Despite being drastically restricted in the 1970s, polychlorinated biphenyls (PCBs) still belong among the most hazardous contaminants. The chemical stability and dielectric properties of PCBs made them suitable for a number of applications, which then lead to their ubiquitous presence in the environment. PCBs are highly bioaccumulative and persistent, and their teratogenic, carcinogenic, and endocrine-disrupting features have been widely reported in the literature. This review discusses recent advances in different techniques and approaches to remediate historically contaminated matrices, which are one of the most problematic in regard to decontamination feasibility and efficiency. The current knowledge published in the literature shows that PCBs are not sufficiently removed from the environment by natural processes, and thus, the suitability of some approaches (e.g., natural attenuation) is limited. Physicochemical processes are still the most effective; however, their extensive use is constrained by their high cost and often their destructiveness toward the matrices. Despite their limited reliability, biological methods and their application in combinations with other techniques could be promising. The literature reviewed in this paper documents that a combination of techniques differing in their principles should be a future research direction. Other aspects discussed in this work include the incompleteness of some studies. More attention should be given to the evaluation of toxicity during these processes, particularly in terms of monitoring different modes of toxic action. In addition, decomposition mechanisms and products need to be sufficiently clarified before combined, tailor-made approaches can be employed.

Evaluation of the Anthropogenic Metal Pollution at Osisko Lake: Sediments Characterization for Reclamation Purposes

The anthropogenic pollution of lake ecosystems by human activities (e.g., mining industries) is recognized as a serious issue. The Osisko urban lake located in Rouyn-Noranda (Quebec, Canada) was used partially as a waste disposal facility for many decades, causing a heavy pollution. The main undertakings of this study are (i) assessing the mineralogical and geochemical properties of lake Osisko sediments, and (ii) studying the pollution that occurred within lake water due to the sediments’ reactivity. Water and sediments across the lake were collected in different sensitive locations. Within the sediment samples, two parts were distinguished: a small layer of black vase over grey sediments. The black vase resembled organic matter while the gray sediment seemed close to clean lake sediments. The collected samples were characterized for their physical (particle size distribution, specific gravity and specific surface area), chemical (minor and major elements as well as total sulfur and carbon) and mineralogical (X-ray diffraction and scanning electron microscope) properties. Additionally, the reactivity of sediments was studied using weathering cells to quantify chemical species leaching and their releasing rates. The results showed that the vase was the only contaminated part with high concentrations of sulfur and metals such as copper, zinc and iron. Geochemical data showed that the composite sample and the vase potentially cause contaminated acid drainage if they are exposed to atmospheric conditions. Indeed, the pH values of the leachates from both samples were between 4 and 6, while those corresponding to sediments remained around circumneutral values. Quantitatively, the contaminant release from the tested samples was variable. Indeed, the Fe cumulative concentrations were around 200, 80 and 20 mg/kg for the vase, composite and sediment samples, respectively. Similarly, the Zn cumulative concentrations were around 4500, 4200, and below the detection limit for vase, composite and sediment samples, respectively. The same tendency was observed for Cu, S, and Fe. Thus, sediments within Osisko lake present a risk for water contamination if they are resuspended or dredged out of the lake. Consequently, they should be stabilized before their disposal. The samples’ high Cu contents also offer the possibility of their reprocessing.

Ex situ remediation of sediment from Serbia using a combination of electrokinetic and stabilization/solidification with accelerated carbonation treatments

The application of three simple and cost-effective technologies for ex situ remediation of the sediment of Begej River in Serbia is presented in this paper. In the first step, conventional electrokinetic treatment (EK) was carried out to reduce the amount of contaminated sediment and enhance the accumulation of metals. Subsequently, stabilization/solidification (S/S) treatment was applied to the remaining portion of polluted sediment to immobilize the accumulated metals. At the same time, the influence of accelerated carbonation on the effectiveness of the treatment was evaluated. The immobilizing agents used in this study included bio ash produced by combustion of wheat and soy straw mixture and bio ash derived from molasses incineration. After the treatments, the risk assessment was performed by using the sequential extraction procedure (SEP) and TCLP and DIN 3841-4 S4 leaching tests. The results obtained after the EK treatment revealed a reduction in the amount of polluted sediment to a half. Leaching tests and SEP performed on S/S mixtures after a 28-day maturation period indicated that accelerated carbonation decreased the mobility of critical metals, especially in wheat and soy straw mixtures. Moreover, based on the leaching tests, all prepared mixtures were categorized as non-hazardous and safe for disposal according to the relevant Serbian regulations. The newly developed method that combines EK and S/S treatments with the addition of accelerated carbonation produced reduced volumes of stabilized sediment which is safe for disposal.

Evaluating the environmental impacts of stabilization and solidification technologies for managing hazardous wastes through life cycle assessment: A case study of Hong Kong

Proper management of hazardous materials arouses widespread environmental concerns due to its enormous ecological and health impacts. The development of green stabilization/solidification (S/S) technology for resourceful utilization of hazardous materials, as well as the immobilization of potentially toxic elements is of great scientific interests. Cement-based S/S is often considered a low-cost and highly efficient technology, but the environmental sustainability of a broad spectrum of S/S technologies has yet to be evaluated. Therefore, this study assessed the environmental sustainability of S/S technologies for managing two common types of hazardous wastes, i.e., contaminated marine sediment and municipal solid waste incineration fly ash (MIFA) by using life cycle assessment (LCA). A total of 17 scenarios under three strategies for sediment and two strategies for MIFA S/S technologies were comprehensively evaluated. The LCA results identified the most preferable S/S technology in each strategy. In particular, Scenario 1 (mixture of sediment with a small percentage of ordinary Portland cement and incinerated sewage sludge ash) of Strategy 1 (use as fill materials) would be the preferred option, as it reduces about 54% and 70% global warming potential compared to those of Scenarios 2 and 3, respectively. This is the first initiative for evaluating the environmental impacts of a wide range of recently developed S/S technologies using green/alternative binders for diverting hazardous wastes from disposal. The results can serve as a decision support for the practical application of the environmentally friendly S/S technology for sustainable remediation.

DPSIR Model Applied to the Remediation of Contaminated Sites. A Case Study: Mar Piccolo of Taranto

The study critically analyses the complex situation of the Mar Piccolo of Taranto (South of Italy), considered one of the most polluted marine ecosystems in Europe. In order to investigate possible cause–effect relationships, useful to plan appropriate planning responses or remediation technologies to be adopted, the Driver–Pressure–State–Impact–Response (DPSIR) model was applied. Methodologically, about 100 references have been considered, whose information was organized according to the logical scheme of the DPSIR. The results showed how the Mar Piccolo is the final receptor of pollutants coming from all industrial and agricultural activities, especially due to its natural hydrogeological network conformation. The anthropic activity represents a critical impact on the ecosystem due to the subsequent marine litter. The mobility of contaminants from sediments to the water column showed the potential risk related to the bioaccumulation of organisms from different trophic levels, posing a threat of unacceptable magnitude to human safety. The paper concludes by discussing the actions currently implemented by the authorities in response to the anthropogenic impacts as well as the need for new ones concerning both plans, programs, and remediation interventions. The case study shows how the DPSIR is a useful framework to organize extensive and heterogeneous information about a complex environmental system, such as the one investigated. This preliminary organization of the available data can represent the starting point for the development of a DPSIR-based Environmental Decision Support System (EDSS) with robust cause–effect relationships.