Highly efficient degradation of metronidazole drug using CaFe2O4/PNA nanohybrids as metal-organic catalysts under microwave irradiation

Rapid degradation of pharmaceutical pollutants using poly(1-naphthylamine) decorated BaFe2O4 nanohybrids under microwave irradiation

Metformin, a widely used antidiabetic drug, has become a growing concern due to its persistence in the environment. It is one of the most frequently detected pharmaceuticals in wastewater and surface water because it is excreted largely unchanged by patients and is not fully removed in conventional wastewater treatment plants. The present study focuses on the synthesis and characterization of BaFe2O4/poly(1-naphthylamine) (PNA) nanohybrids and their application as microwave-active catalysts for the degradation of metformin. The nanohybrids were analyzed using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD) techniques. The IR studies presence of peaks associated with PNA and BaFe2O4 confirmed the formation of the nanohybrid. The XRD profile of PNA/BaFe2O4 nanohybrids did not exhibit any significant shift in the crystalline peaks corresponding to BaFe2O4 but some new peaks were observed in addition to the existing BaFe2O4 peaks, which were attributed to the presence of PNA. SEM studies established the mixed morphology. Metformin degradation was carried out under microwave irradiation for 18 min, and the effects of catalyst dosage and drug concentration were evaluated to confirm the catalytic performance of the PNA/BaFe2O4 system. A maximum degradation efficiency of 89% was achieved in 18 min using 5% PNA/BaFe2O4 as the catalyst. Additionally, a potential degradation mechanism was proposed.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40201-024-00931-z.

Elimination of antibiotic contaminants from wastewater using polycarbazole nanocomposites as microwave-activated catalysts

Ciprofloxacin (CIP) is a widely used antibiotic, and its presence in water bodies poses a risk due to its resistance to conventional wastewater treatment processes. The accumulation of such pharmaceuticals can disrupt aquatic ecosystems, harm aquatic life, and contribute to ecological imbalances. Therefore, the degradation of CIP is of immense environmental significance. This study presents the microwave-assisted catalytic degradation of the antibiotic drug CIP using nanocomposites of carbazole copolymerized with pyrrole (PCz-co-PPy) and with thiophene (PCz-co-PTh). The PCz-co-PPy and PCz-co-PTh nanocomposites were synthesized through an ultrasound-assisted method. The resulting nanocomposites were characterized using spectral and morphological analyses. FT-IR and UV-Vis spectroscopy confirmed successful intercalation and copolymerization, while FESEM images revealed a chain-like morphology. These copolymer nanocomposites were employed as microwave-active catalysts for CIP degradation, achieving an optimal degradation efficiency of 95% within 21 min using PCz-co-PPy-50/50 and PCz-co-PTh-50/50 at 600 W microwave power. The degradation followed pseudo-first-order kinetics, with rate constants calculated as 0.031 min-1, 0.020 min-1, 0.030 min-1, 0.056 min-1, and 0.071 min-1for PCz, PPy, PTh, PCz-co-PPy-50/50, and PCz-co-PTh-50/50 nanocomposites, respectively, for a 50 mg l-1CIP solution. The catalytic efficiency is attributed to the formation of microwave-induced active species, including hot spots, electrons (e-), holes (h+), superoxide radicals (•O2-), and hydroxyl radicals (•OH). Scavenger analysis verified that •OH and •O2-radicals play a crucial role in CIP degradation. A possible degradation mechanism and pathway for the nanocomposite system is proposed.

Photocatalytic degradation of cetirizine hydrochloride using polypyrrole decorated zinc ferrite nanohybrids under visible light irradiation

The present work reports photocatalytic degradation of cetirizine hydrochloride (CTZ-HCl) utilizing polypyrrole (PPy) nanohybrids with ZnFe2O4 (ZnFe) nanoparticles. The synthesized materials were characterized using UV-visible spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectroscopy, BET, and scanning electron microscopy (SEM) techniques. UV diffuse reflectance studies (UV-DRS) revealed that the band gap was found to decrease with increase in the loading of PPy and Kubelka-Munk plots confirmed the bandgap values to be 2.14 eV for ZnFe, 1.94 eV for 1% PPy/ZnFe, 1.66 eV for 3% PPy/ZnFe, and 1.38 eV for 5% PPy/ZnFe. The photocatalytic performance against CTZ-HCl degradation was performed under visible light irradiation for 60 min. The effect of catalyst dosage and the effect of drug concentration were investigated to confirm degradation behavior of the PPy/ZnFe photocatalysts. The degradation followed the pseudo-first-order kinetics model. Maximum photocatalytic degradation was observed to be 98% within 60 min using 5% PPy/ZnFe as the photocatalyst. The recyclability tests revealed that the 5% PPy/ZnFe photocatalyst was reusable up to 4 cycles. Radical scavenging studies confirmed the generation of ●OH radicals that were responsible for the drug degradation. The degraded fragments were analyzed using LCMS technique and the tentative mechanism of degradation was proposed.

Impact of LED radiation intensity on gold nanoparticles photodeposition on TiO2 with physicochemical and photocatalytic characterization

This study investigates the influence of LED radiation intensity on the photodeposition of gold nanoparticles onto TiO2 substrates, examining their physicochemical properties and photocatalytic activities. Utilizing a range of radiation intensities and wavelengths, TiO2-Au composites were synthesized and characterized through techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray (EDX), and X-ray photoelectron spectroscopy (XPS). The deposition process, markedly enhanced by shorter wavelengths and higher intensities, efficiently formed gold nanoparticles. This research distinctly highlights observable morphological changes in the nanoparticles; increased radiation intensity not only augmented the size but also altered their shape from spherical to hexagonal. These morphological transformations significantly improve the composites' light absorption and catalytic properties due to the surface plasmon resonance of the gold nanoparticles. Photocatalytic assessments, using metronidazole as a model pollutant, demonstrated that composites prepared with higher LED intensities showed significantly enhanced degradation capabilities compared to those synthesized with lower intensities. The findings underscore that manipulating photodeposition parameters can critically influence the structural and functional properties of TiO2-Au composites, potentially advancing their applications in environmental remediation and solar energy utilization.

Comparative evaluation of α-Bi2O3/CoFe2O4 and ZnO/CoFe2O4 heterojunction nanocomposites for microwave induced catalytic degradation of tetracycline

Two microwave (MW) responsive heterojunction nanocomposite catalysts, i.e., α-Bi2O3/CoFe2O4 (BO/CFO) and ZnO/CoFe2O4 (ZO/CFO), with weight% ratio of 70/30, 50/50, 30/70 were synthesized by sequential thermal decomposition and co-precipitation methods, and used for the degradation of tetracycline (TC) under MW irradiation. The formation of desired catalysts was confirmed through the characterization results of XRD, FT-IR, SEM, VSM, UV-DRS, XPS, BET, etc. Using batch MW experiments, the catalyst dose, pH, initial TC concentration, reaction temperature, and MW power were optimized for TC removal. Under the following reaction conditions: catalyst dose ∼1 g/L, initial TC concentration ∼1 mg/L, temperature ∼90 °C, MW ∼450 W, BO/CFO, and ZO/CFO showed ∼97.55% and 88.23% TC degradation, respectively, after 5 min. The difference in the catalytic response against TC degradation indicated the difference in reflective loss (RL) between these two catalysts. The presence of other competitive anions has affected the removal efficiency of TC due to the scavenging effect. The radical trapping study revealed the significant contribution of TC degradation by hydroxyl radicals in the case of ZO/CFO, whereas for BO/CFO, superoxide (●O2-) and hydroxyl radicals (●OH) both played influential roles. The Z-scheme heterojunction of BO/CFO allowed the formation of ●O2- but the same was inhibited in type-II heterojunction of ZO/CFO due to the valance band position. The dielectric loss, magnetic loss, interfacial polarization, and high electrical conductivity, 'hotspots' were produced over the catalyst surface alongside electron-hole separation at heterojunctions, which were responsible for the generation of reactive oxygen species. In addition, Co3+/Co2+ and Fe3+/Fe2+ redox cycles have promoted ●O2- and sulfate radical production during persulfate application. Among the two MW responsive catalysts, BO/CFO could be a potential material for rapidly destroying emerging organic pollutants from wastewater without applying other oxidative chemicals under MW irradiation.

Innovative microwave in situ approach for crystallizing TiO2 nanoparticles with enhanced activity in photocatalytic and photovoltaic applications

This investigation introduces an innovative approach to microwave-assisted crystallization of titania nanoparticles, leveraging an in situ process to expedite anatase crystallization during microwave treatment. Notably, this technique enables the attainment of crystalline material at temperatures below 100 °C. The physicochemical properties, including crystallinity, morphology, and textural properties, of the synthesized TiO2 nanomaterials show a clear dependence on the microwave crystallization temperature. The presented microwave crystallization methodology is environmentally sustainable, owing to heightened energy efficiency and remarkably brief processing durations. The synthesized TiO2 nanoparticles exhibit significant effectiveness in removing formic acid, confirming their practical utility. The highest efficiency of formic acid photodegradation was demonstrated by the T_200 material, reaching almost 100% efficiency after 30 min of irradiation. Furthermore, these materials find impactful application in dye-sensitized solar cells, illustrating a secondary avenue for the utilization of the synthesized nanomaterials. Photovoltaic characterization of assembled DSSC devices reveals that the T_100 material, synthesized at a higher temperature, exhibits the highest photoconversion efficiency attributed to its outstanding photocurrent density. This study underscores the critical importance of environmental sustainability in the realm of materials science, highlighting that through judicious management of the synthesis method, it becomes feasible to advance towards the creation of multifunctional materials.

Microwave-assisted rapid degradation of Methyl red dye using Polyfuran/Polythiophene and its Co-oligomers as catalysts

The work reports for the first time microwave-assisted degradation of Methyl Red (MR) dye using polythiophene (PTh), polyfuran (PFu) and its co-oligomers. The co-oligomers were synthesized by sonication using varying mol ratios of PFu/PTh (80:20, 50:50 and 20:80). The polymers and its co-oligomers were analyzed for their spectral and morphological properties using FTIR, UV-visible and scanning electron microscopy (SEM) coupled with elemental mapping. The oligomers as well as pristine polymers were used as microwave active catalysts to degraded Methyl Red (MR) dye. The degradation was found to follow the pseudo-first-order model. Maximum degradation of 99% was achieved using PFu/PTh-50/50 as catalyst. Scavenging tests were also carried out to confirm the generation of radicals responsible for the effective degradation of the dye. The LCMS studies were used to explore the degraded fragments and a plausible mechanism was proposed to reveal the degradation pathway.

Synthesis and characterization of pH-responsive conducting polymer/Na-alginate/gelatin based composite hydrogels for sustained release of amoxicillin drug

Composite hydrogels of Na-Alginate (Na-ALG) and Gelatin (GEL) with conducting polymers (CPs) were synthesised using poly(o-phenylenediamine) (POPD), polyaniline (PANI), poly(1-naphthylamine (PNA) and poly(vinylenedine fluoride) (PVDF). The synthesised hydrogels were characterized using FTIR, scanning electron microscopy (SEM) rheology, swelling ability and in-vitro drug release characteristics. The purpose of this investigation was to determine whether these hydrogels could be used to deliver antibiotics for extended drug release. The composite hydrogels were loaded with antibiotic drug: amoxicillin in three different concentrations and the release was studied at intestinal fluid (pH 7.4) and gastric fluid (pH 1.2). Release kinetics was found to show best fit in zero order models at both pH values and showed prolonged release characteristics. The POPD-Na-ALG/GEL showed highest release at intestinal pH of 7.4, while PVDF-Na-ALG/GEL showed highest release at gastric pH at 1.2.

Optimization of Visible-Light-Driven Ciprofloxacin Degradation Using a Z-Scheme Semiconductor MgFe2O4/UiO-67

A heterogeneous photocatalyst, MgFe2O4/UiO-67 (MU-x), was successfully synthesized by doping magnetic magnesium ferrite nanoparticles (MgFe2O4) with the UiO-67 metal-organic framework at various weight ratios (MgFe2O4: UiO-67 at 30, 50, 70, and 90 wt %). Various techniques, including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR) , Brunauer-Emmett-Teller (BET), photoluminescence (PL), vibrating sample magnetometry (VSM), electrochemical impedance spectroscopy (EIS), and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), were used to characterize the prepared photocatalysts. The photocatalytic performance of MU-x in the degradation of ciprofloxacin (CIP) under visible light was assessed. The CIP degradation efficiency was found to increase as the amount of MgFe2O4 in the composite was increased up to 70 wt %. Experimental conditions were optimized using response surface methodology (RSM) based on central composite design (CCD) with three factors: initial pH, catalyst loading, and CIP concentration. Using the obtained model, the optimal conditions were determined as follows: initial pH of 8.025, catalyst loading of 33.8 wt %, and CIP concentration of 10.8 mg/L. Under these optimal conditions, a notable improvement was achieved, with 99.62% of CIP removal achieved within 90 min, surpassing the performance of previously reported photocatalysts. Total organic carbon (TOC) analysis revealed a high degree of mineralization, at 81.25%. The degradation pathway of CIP was investigated based on liquid chromatography-mass spectrometry (LC-MS) analysis. Finally, the values of ECB and EVB of the photocatalyst were determined and the possible degradation mechanism of CIP was investigated based on Mott-Schottky and the applied scavengers. The hydroxyl radical (•OH) was identified as the dominant species in the removal of CIP through a trapping experiment. The photocatalyst with 70 wt % of MgFe2O4 (MU-70) exhibited excellent stability and recoverability with an external magnet, demonstrating 86.33% CIP removal after four cycles. According to the obtained results, MU-70 is a promising visible-light-active photocatalyst with great potential for water treatment applications and convenient recovery.

Efficient visible light-induced photocatalytic degradation of tetracycline hydrochloride using CuFe2O4 and PANI/CuFe2O4 nanohybrids

Tetracycline hydrochloride (TC-HCl) is widely implemented as a wide-ranging antibacterial drug in medical care and animal husbandry, in spite of having negative effects on the environment and human health. Photocatalytic treatment is one of the popular techniques used to treat TC-HCl in wastewater. In this study, we have used CuFe2O4 and CuFe2O4/polyaniline (PANI) nanohybrids as photocatalysts for the degradation of TC-HCl. The metal ferrite and its nanohybrids were synthesized by co-precipitation method. FTIR, UV-Vis, XRD, and SEM-EDX were used to characterize the synthesized nanohybrids. The optical band gaps were estimated to be 2.74 eV for CuFe2O4, 1.72 eV for 1-PANI/CuFe2O4, 1.66 eV for 3-PANI/CuFe2O4, and 1.31 eV for 5-PANI/CuFe2O4. The photocatalytic performance of the nanohybrids appeared superior than pristine CuFe2O4, and maximum photocatalytic degradation was observed to be 86% within 120 min using 5-PANI/CuFe2O4 as the photocatalyst. The degraded fragments were analyzed by LCMS technique, and a tentative mechanism for the degradation of TC-HCl was proposed.

Visible-light induced degradation of diphenyl urea and polyethylene using polythiophene decorated CuFe2O4 nanohybrids

The present work reports facile synthesis of CuFe₂O₄ nanoparticles via co-precipitation method and formulation of its nanohybrids with polythiophene (PTh). The structural and morphological properties were investigated using fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy coupled with energy dispersive spectra (SEM-EDS) and UV-Vis spectroscopy. The band gap was found to decrease with increase in the loading of PTh and was found to be 2.52 eV for 1-PTh/CuFe₂O₄, 2.15 eV for 3-PTh/CuFe₂O₄ and 1.89 eV for 5-PTh/CuFe₂O₄. The nanohybrids were utilized as photocatalysts for visible light induced degradation of diphenyl urea. Diphenyl urea showed 65% degradation using 150 mg catalyst within 120 min. Polyethylene (PE) was also degraded using these nanohybrids under visible light as well as microwave irradiation to compare its catalytic efficiency under both conditions. Almost 50% of PE was degraded under microwave and 22% under visible light irradiation using 5-PTh/CuFe₂O₄. The degraded diphenyl urea fragments were analyzed using LCMS and a tentative mechanism of degradation was proposed.

Design and Microwave-Assisted Synthesis of TiO2-Lanthanides Systems and Evaluation of Photocatalytic Activity under UV-LED Light Irradiation

The TiO2-Eu and TiO2-La systems were successfully synthesized using the microwave method. Based on the results of X-ray diffraction analysis, it was found that regardless of the analyzed systems, two crystal structures were noted for the obtained samples: anatase and rutile. The analysis, such as XPS and EDS, proved that the doped lanthanum and europium nano-particles are present only on the TiO2 surface without disturbing the crystal lattice. In the synthesized systems, there were no significant changes in the bandgap energy. Moreover, all the obtained systems were characterized by high thermal stability. One of the key objectives of the work, and a scientific novelty, was the introduction of UV-LED lamps into the metronidazole photo-oxidation pathway. The results of the photo-oxidation study showed that the obtained TiO2 systems doped with selected lanthanides (Eu or La) show high efficiency in the removal of metronidazole, and at the same consuming nearly 10 times less electricity compared to conventional UV lamps (high-pressure mercury lamp). Liquid-chromatography mass-spectrometry (LC-MS) analysis of an intermediate solution showed the presence of fragments of the degraded molecule by m/z 114, 83, and 60, prompting the formulation of a plausible photodegradation pathway for metronidazole.

A comprehensive review on the photocatalytic activity of polythiophene-based nanocomposites against degradation of organic pollutants

Photocatalytic activity of polythiophene-based nanocomposites.