Biosorption of ketoprofen and diclofenac by living cells of the green microalgae Chlorella sp

Insights into the adsorption of emerging organic contaminant by low-cost readily separable modified jute fiber

A high-efficiency biosorbent based on the low-priced jute fiber was developed, characterized, and applied to remove the emerging organic contaminant diclofenac from aqueous solutions. Jute fiber was treated by NaOH (named AJF) followed by grafting different amounts of trimethyl[3-(trimethoxysilyl) propyl] ammonium chloride (named AJF-TTSAC). The composition, morphology, porosity, and adsorption features of the neat and modified jute fiber were evaluated and compared. The surface of neat JF was smooth, nonporous, and free of cracks. NaOH treatment increased the fibrillation, created cracks and grooves, and increased the oxygen content, total pore volume, and surface area. In comparison to AJF, grafting TTSAC filled in the crevices, grooves, and spaces between fibrillates, and decreased the total pore volume and surface area. The adsorption of diclofenac by the neat and modified JF occurred at highly acidic pHo and peaked at pHo 3. Among the neat and modified JF, AJF-TTSAC5 was the most efficient followed by AJF. The efficiency of AJF and AJF-TTSAC5 was highest using 1.00 g/L, at 35 °C and was not affected by the presence of NaCl. The Elovich, pseudo-first-order, and pseudo-second-order models described the adsorption kinetic satisfactorily with the marginal advantage of Elovich for AJF and pseudo-second-order for AJF-TTSAC5. The isotherm study exposed the multilayer and physisorption nature of the adsorption of diclofenac onto AJF and AJF-TTSAC5. The Langmuir monolayer saturation capacity of AJF-TTSAC5 was 37.43 mg/g which revealed its great potential relative to other adsorbents in the literature. The AJF and AJF-TTSAC5 were easily regenerated using distilled water and kept good performance for 5 repetitive cycles.

Seaweed-based alginate/hydroxyapatite composite for the effective removal of bacteria, cyanobacteria, algae, and crystal violet from water

A novel cost-effective and multifunctional nanocomposite was developed based on sustainable macroalgae biomass. The brown seaweed Sargassum latifolium was utilized for alginate extraction and the calcareous red seaweed Tricleocarpa fragilis was utilized as CaCO3 source for nanohydroxyapatite synthesis. The developed Zn2+-crosslinked alginate/nanohydroxyapatite (ZA/nHA) beads were characterized by FT-IR, XRD, and TEM. The antimicrobial potential of ZA/nHA to disinfect synthetic Escherichia coli-contaminated water was evaluated at different bacterial load and composite concentrations. The developed ZA/nHA effectively inactivated bacteria at initial concentration ≤ 105 CFU mL-1 and 0.5-1% (w/v) of ZA/nHA within 300-360 min. The kinetics of bacterial disinfection exhibited better fitting to Weibull model than Log-liner model, which confirmed the disinfection process. Furthermore, treatment of the cyanobacterium (Chroococcus sp.) and the microalga (Chlorella sp.) with ZA/nHA showed promising antialgal properties as indicated by reductions in chlorophyll a. The treatment indicated 100% and 90% removal of Chroococcus sp. and Chlorella sp. within 2 and 4 days, respectively. The developed ZA/nHA also exhibited a promising application as a biosorbent for crystal violet (CV). The adsorption process was very fast (0.171 mg CV g-1 adsorbent was removed within 7 min at pH 6.0). The adsorption kinetics exhibited better fitting to the pseudo-second order and Elovich models than the pseudo-first order equation. Besides, Sips model better represented the isotherm data of CV adsorption. The thermodynamic analysis indicated exothermic adsorption, which became more favorable at low temperature and high CV concentration. The developed nanocomposite is eco-friendly and suitable for multiple environmental applications.

Biogenic adsorbents for removal of drugs and dyes: A comprehensive review on properties, modification and applications

This comprehensive review explores the potential and versatility of biogenic materials as sustainable and environmentally benign alternatives to conventional adsorbents for the removal of drugs and dyes. Biogenic adsorbents derived from plants, animals, microorganisms, algae and biopolymers have bioactive compounds that interact with functional groups of pollutants, resulting in their binding with the sorbent. These materials can be modified mechanically, thermally and chemically to enhance their adsorption properties. Biogenic hybrid composites, which integrate the characteristics of more than one material, have also been fabricated. Additionally, microorganisms and algae are analyzed for their ability to uptake pollutants. Various influential factors that contribute to the adsorption process are also discussed. The challenge, limitations and future prospects for research are reviewed and bridging gap between large scale application and laboratory scale. This comprehensive review, involves a combination of various biogenic adsorbents, going beyond the existing literature where typically only specific adsorbents are reported. The review also covers the isotherms, kinetics, and desorption studies of biogenic adsorbents, providing an improved framework for their effective use in removing pharmaceuticals and dyes from wastewater.

The Importance of Humic Substances in Transporting "Chemicals of Emerging Concern" in Water and Sewage Environments

In this study, we examined the sorption of selected "chemicals of emerging concern" (CEC) on humic substances commonly found in water and municipal wastewater. These were ibuprofen, diclofenac, caffeine, carbamazepine, estrone, triclosan, bisphenol A, and isoproturon. The humic substances (HSs) were synthetic and not contaminated by the tested organic substances. The elemental composition and content of mineral micropollutants, gravimetric curves, and the IR spectrum of HSs were determined. We determined a relationship between the process efficiency and the characteristics of a sorbent and sorbate using the properties of organic substances sorbed on HSs. This relationship was confirmed by sorption tests on the HS complex, i.e., the HS-organic micropollutant. It has been shown that the given complexes have a greater affinity for hydrophobic surfaces than hydrophilic surfaces. To confirm the nature of the sorbent surfaces, we determined their zeta potential dependence on the pH of the solution. Studies have shown that HSs are carriers of both mineral substances and CEC in water and sewage environments.

Ketoprofen as an emerging contaminant: occurrence, ecotoxicity and (bio)removal

Ketoprofen, a bicyclic non-steroidal anti-inflammatory drug commonly used in human and veterinary medicine, has recently been cited as an environmental contaminant that raises concerns for ecological well-being. It poses a growing threat due to its racemic mixture, enantiomers, and transformation products, which have ecotoxicological effects on various organisms, including invertebrates, vertebrates, plants, and microorganisms. Furthermore, ketoprofen is bioaccumulated and biomagnified throughout the food chain, threatening the ecosystem function. Surprisingly, despite these concerns, ketoprofen is not currently considered a priority substance. While targeted eco-pharmacovigilance for ketoprofen has been proposed, data on ketoprofen as a pharmaceutical contaminant are limited and incomplete. This review aims to provide a comprehensive summary of the most recent findings (from 2017 to March 2023) regarding the global distribution of ketoprofen in the environment, its ecotoxicity towards aquatic animals and plants, and available removal methods. Special emphasis is placed on understanding how ketoprofen affects microorganisms that play a pivotal role in Earth's ecosystems. The review broadly covers various approaches to ketoprofen biodegradation, including whole-cell fungal and bacterial systems as well as enzyme biocatalysts. Additionally, it explores the potential of adsorption by algae and phytoremediation for removing ketoprofen. This review will be of interest to a wide range of readers, including ecologists, microbiologists, policymakers, and those concerned about pharmaceutical pollution.

A review on algae biosorption for the removal of hazardous pollutants from wastewater: Limiting factors, prospects and recommendations

Heavy metals, dyes and pharmaceutical pollutants in water environment are considered as serious threat to the human and animal health globally. Rapid development of industrialization and agricultural activities are the major source for eliminating the toxic pollutants into the aquatic environment. Several conventional treatment methods have been suggested for the removal of emerging contaminants from wastewater. Algal biosorption, among other strategies and techniques, is demonstrating to be a limited technical remedy that is more focused and inherently more efficient and helps remove dangerous contaminants from water sources. The different environmental effects of harmful contaminants, including heavy metals, dyes, and pharmaceutical chemicals, as well as their sources, were briefly compiled in the current review. This paper provides a comprehensive definition of the future possibilities in heavy compound decomposition by using algal technology, from aggregation to numerous biosorption procedures. Functionalized materials produced from algal sources were clearly proposed. This review further highlights the limiting factors of algal biosorption to eliminate the hazardous material. Finally, this study showed how the existence of algae indicates a potential, effective, affordable, and sustainable sorbent biomaterial for minimizing environmental pollution.

Macroalgal-derived alginate/wastepaper hydrogel to alleviate sunflower drought stress

MAIN CONCLUSION

Alginate/wastepaper hydrogel mitigated sunflower drought stress by increasing the water holding capacity of the soil and decreasing phosphate leaching. The hydrogel promoted sunflower growth and decreased stress related biomarkers. There is a growing interest in the development of biodegradable hydrogels for the alleviation of drought stress on plants. A novel hydrogel based on brown algal-derived alginate and wastepaper was developed and tested as a soil supplement for sunflower growth under moderate (75% field capacity (FC)) and extreme (50% FC) water-deficit stress. The hydrogel showed fast swelling in water, which obeyed the pseudo-first order kinetics. Besides, it increased the water holding capacity of the soil and exhibited a good phosphate adsorption (37 mg PO₄^- g^-1 hydrogel after 6 days) in the soil, and more than 67% of the adsorbed phosphate was desorbed after 20 days. Thus, the phosphate leaching from the hydrogel-amended soil in a column experiment was only 2.77 mg after 4 times of over-irrigation, compared to 11.91 mg without the hydrogel. The hydrogel application promoted various root traits such as fresh and dry biomass, area, and length by > 2-, > 1.6-, > 1.35-, and > 1.3-folds under both water regimes in relation to the no-hydrogel treatments at the same conditions. Furthermore, the sunflower shoots exhibited similar proline contents to the well-watered control (100% FC), with > 50% reduction in relation to the drought-stressed plants under the same conditions. Similarly, the malondialdehyde contents were lowered by > 15%. The analysis of the antioxidant enzymes also indicated a marked reduction in the specific activities of catalase and ascorbate peroxidase under both 75 and 50% FC compared to the respective controls. Additionally, the hydrogel promoted the uptake of phosphate by sunflower roots. These results implied that the developed biodegradable hydrogel could be effectively applied as a soil additive to alleviate drought stress on crops.

Green alga Chlamydomonas reinhardtii can effectively remove diclofenac from the water environment - A new perspective on biotransformation

The use of unicellular algae to remove xenobiotics (including drugs) from wastewaters is one of the rapidly developing areas of environmental protection. Numerous data indicate that for efficient phycoremediation three processes are important, i.e. biosorption, bioaccumulation, and biotransformation. Although biosorption and bioaccumulation do not raise any serious doubts, biotransformation is more problematic since its products can be potentially more toxic than the parent compounds posing a threat to organisms living in a given environment, including organisms that made this transformation. Thus, two questions need to be answered before the proper algae strain is chosen for phycoremediation, namely what metabolites are produced during biotransformation, and how resistant is the analyzed strain to a mixture of parent compound and metabolites that appear over the course of culture? In this work, we evaluated the remediation potential of the model green alga Chlamydomonas reinhardtii in relation to non-steroidal anti-inflammatory drugs (NSAIDs), as exemplified by diclofenac. To achieve this, we analysed the susceptibility of C. reinhardtii to diclofenac as well as its capability to biosorption, bioaccumulation, and biotransformation of the drug. We have found that even at a relatively high concentration of diclofenac the algae maintained their vitality and were able to remove (37.7%) DCF from the environment. A wide range of phase I and II metabolites of diclofenac (38 transformation products) was discovered, with many of them characteristic rather for animal and bacterial biochemical pathways than for plant metabolism. Due to such a large number of detected products, 18 of which were not previously reported, the proposed scheme of diclofenac transformation by C. reinhardtii not only significantly contributes to broadening the knowledge in this field, but also allows to suggest possible pathways of degradation of xenobiotics with a similar structure. It is worth pointing out that a decrease in the level of diclofenac in the media observed in this study cannot be fully explained by biotransformation (8.4%). The mass balance analysis indicates that other processes (total 22%), such as biosorption, a non-extractable residue formation, or complete decomposition in metabolic cycles can be involved in the diclofenac disappearance, and those findings open the prospects of further research.

Low-cost biosorption of Fe(II) and Fe(III) from single and binary solutions using Ulva lactuca-derived cellulose nanocrystals-graphene oxide composite film

The marine algal biomass of Ulva lactuca was utilized for the extraction of cellulose and the development of cellulose nanocrystals/graphene oxide film. Cellulose nanocrystals with 50-150 nm were produced by H₂SO₄ hydrolysis of the algal cellulose. The adsorption efficiency of the nanocomposite film for Fe(II) and Fe(III) ions was successfully evaluated using Box-Behnken design. The maximum removal for Fe(II) (64.15%) could be attained at pH 5.13, adsorbent dosage 7.93 g L^-1 and Fe(II) concentration 15.39 mg L^-1, while the biosorption of Fe(III) was 69.92% at pH 5.0, adsorbent dosage 2 g L^-1, and Fe(III) concentration 15.0 mg L^-1. However, in the binary system, the removal efficiency of Fe(II) was enhanced to 95.48% at Fe(II):Fe(III) ratio of 1:1, while the Fe(III) removal was increased to 79.17% at ratio 1:2. The pseudo-second-order kinetics exhibited better fitting to the experimental results of Fe(II) and Fe(III) adsorption in both single and binary systems. The intra-particle diffusion was prominent during the biosorption, but the effect of the external mass transfer was significant. The Langmuir, Freundlich, Langmuir-Freundlich, Temkin, and Dubinin-Radushkevich isotherms showed satisfactory fitting to the experimental data, but they differ in priority based on iron state and pH. The adsorption of Fe(II) in the presence of Fe(III) in a mixture was best represented by the extended Langmuir model, while the extended Langmuir-Freundlich model best fitted the adsorption of Fe(III). The FT-IR analysis indicated that physisorption through electrostatic interaction/complexation is the predominant mechanism for the adsorption of iron using the nanocomposite film.

Assessing the potential for nevirapine removal and its ecotoxicological effects on Coelastrella tenuitheca and Tetradesmus obliquus in aqueous environment

Remediation of the antiretroviral (ARV) drug, nevirapine (NVP) has attracted considerable scientific attention in recent years due to its frequent detection and persistence in aquatic environments and potential hazards to living organisms. Algae-based technologies have been emerging as an environmentally friendly option for the removal of pharmaceutical compounds, but their ARV drug removal potential has not been fully explored yet. This study aimed to explore the ecotoxicity and removal potential of NVP by two microalgal species, Coelastrella tenuitheca and Tetradesmus obliquus. Lower environmental concentrations (up to 200 ng L^-1) of NVP enhanced the microalgal growth, and the highest dry cell weight of 941.27 mg L^-1 was obtained in T. obliquus at 50 ng L^-1 NVP concentration. Both microalgae showed varying removal efficiencies (19.53-74.56%) when exposed to NVP concentration levels of up to 4000 ng L^-1. At the late log phase (day 8), T. obliquus removed the highest percentage of NVP (74.56%), while C. tenuitheca removed 48% at an initial NVP concentration of 50 ng L^-1. Photosynthetic efficiency (Fv/Fm and rETR) of the two microalgal species, however, was not affected by environmental concentrations of NVP (up to 4000 ng L^-1) at the mid log phase of growth. SEM analysis demonstrated that both algal species produced distinct ridges on their cell surfaces after NVP uptake. In the ecotoxicity study, the calculated IC₅₀ values of NVP (0-100 mg L^-1) after 96 h of exposure were 23.45 mg L^-1 (C. tenuitheca) and 18.20 mg L^-1 (T. obliquus). The findings of the present study may contribute to a better understanding of the environmental hazards associated with NVP and the efficacy of microalgae in removing this pharmaceutical from aquatic environments.

Synthesis of a biobased resin and its screening as an alternative adsorbent for organic and inorganic micropollutant removal

The sol-gel route was used to synthesize a biophenolic resin from a blend of Kraft black liquor and condensed tannin. The biobased resin has an amorphous structure and diversified surface functional groups. The biomaterial thermal stability was improved by Kraft black liquor, which increased the fixed carbon yield by 19.78% in an oxidant medium and 9.07% in an inert medium. Moreover, the presence of fixed carbon and char is positively related to the material flame retardant property. Additionally, impedance measurements were used to understand the physical phenomena occurring at the polymeric matrix's interface and the material's final properties. The biobased resin characterization and the considerable increase in the presence of micropollutants in surface and water bodies suggest the new biomaterial application in the adsorption process. Thus, its adsorption capacity toward several organic and inorganic micropollutants and its effectiveness in complex water matrices were evaluated. Methylene blue was used as a model compound to assess the influence of the resin composition on the adsorption capacity, and the type H isotherm indicates the high affinity of the biobased resin toward the micropollutant. The adsorption occurs in multilayer by intermolecular interaction and electrostatic forces. The amount of Kraft black liquor favored the adsorption, and the adsorption capacity was greater than 1250 mg g-1. When inorganic compounds were evaluated, the carboxyl and phenol groups favor the biomaterial affinity toward metal ions. Cu2+ and Ni2+ were completely removed from the contaminated water, and the adsorption capacity of the other inorganic compounds was: Pb2+ (36.97 mg g-1), Al3+ (22.17 mg g-1), Ba2+ (12.76 mg g-1), Ag1+ (33.85 mg g-1), and Fe2+ (19.44 mg g-1). In contrast, the adsorption capacity of the organic micropollutants was: 2,4-D (3.09 mg g-1), diuron (5.89 mg g-1), atrazine (2.71 mg g-1), diclofenac (2.04 mg g-1), caffeine (5.79 mg g-1), acetaminophen (4.80 mg g-1), methylene Blue (106.66 mg g-1), and methyl orange (30.48 mg g-1). The results pointed that the adsorption efficiency of organic micropollutants increases with the distribution coefficient (logD), indicating the biobased resin affinity toward more lipophilic compounds and ionized species.

Ecofriendly and sustainable Sargassum spp.-based system for the removal of highly used drugs during the COVID-19 pandemic

Analgesic consumption increased significantly during the COVID-19 pandemic. A high concentration of this kind of drug is discarded in the urine, reaching the effluents of rivers, lakes, and seas. These medicines have brought serious problems for the flora and, especially, the ecosystems’ fauna. This paper presents the results of removing diclofenac, ibuprofen, and paracetamol in an aqueous solution, using Sargassum spp. from the Caribbean coast. The study consisted of mixing each drug in an aqueous solution with functionalized Sargassum spp in a container under constant agitation. Therefore, this work represents an alternative to solve two of the biggest problems in recent years; first, the reduction of the overpopulation of sargassum through its use for the remediation of the environment. Second is the removal of drug waste used excessively during the COVID-19 pandemic. Liquid samples of the solution were taken at intervals of 10 min and analyzed by fluorescence to determine the concentration of the drug.

The sorption capacity for diclofenac, ibuprofen, and paracetamol was 2.46, 2.08, and 1.41 μg/g, corresponding to 98 %, 84 %, and 54 % of removal, respectively. The removal of the three drugs was notably favored by increasing the temperature to 30 and 40 °C, reaching efficiencies close to 100 %. Moreover, the system maintains its effectiveness at various pH values. In addition, the Sargassum used can be reused for up to three cycles without reducing its removal capacity. The wide diversity of organic compounds favors the biosorption of drugs, removing them through various kinetic mechanisms. On the other hand, the Sargassum used in the drugs removal was analyzed by X-ray diffraction, FTIR spectroscopy, TGA analysis, and scanning electron microscopy before and after removal. The results showed an evident modification in the structure and morphology of the algae and demonstrated the presence of the biosorbed drugs. Therefore, this system is sustainable, simple, economical, environmentally friendly, highly efficient, and scalable at a domestic and industrial level that can be used for aquatic remediation environments.

Efficient Removal of Methylene Blue Using Living Biomass of the Microalga Chlamydomonas moewusii: Kinetics and Equilibrium Studies

The efficiency of the living biomass of the microalga Chlamydomonas moewusii in removing methylene blue dye is determined. The kinetics, equilibrium isotherms, and the effects on this process of the pH, contact time, and initial concentration of the dye are studied. Fourier transform infrared spectrometry and point of zero charge are used to characterize the biomass and explore the process. The maximum removal capacity derived from the Langmuir isotherm is 212.41 ± 4.55 mg/g after 7 h of contact time at pH 7. The removal process is rapid because kinetic studies revealed that the best fit of the data is with pseudo-third-order kinetics. The removal efficiency is dependent on the pH; as the pH increased, the efficiency is higher. These results show that the living biomass of this microalga is a very efficient biosorbent and therefore very suitable for the removal of methylene blue from aqueous solutions.