An evaluation of temporal changes in physicochemical properties of gully pot sediments

Microplastics in gully pot sediment in urban areas: Presence, quantities and characteristics

Stormwater is widely recognized as a pathway for transporting pollutants, including microplastics, from sources in urban environments to receiving waters. Gully pots are often where urban runoff drains into the piped network; they typically include a trap where sediments accumulate. The aim of this work was to contribute to a better understanding of the fate of microplastics as they enter into the urban drainage system, and the role of gully pots in trapping microplastics. Sediment samples collected from 29 gully pots were analysed for non-carbon-black and carbon-black (e.g. tire wear particles) microplastics larger than 40 μm using μ-FTIR and ATR-FTIR, respectively. Commonly found polymers in descending order were PP > EPDM > EVA > PS > SBR, PP was most common both by mass and by number of microplastics. The total concentration of carbon black and non-carbon black microplastics ranged from 709 to 10 600 items/100 g dry matter (DM), (median: 2960 items/100 g). Estimated mass of non-carbon black microplastics ranged from 0.19 to 490 mg/100 g, (median: 3.66 mg/100 g). In total 21 different types of microplastics were detected, the majority of these (13) were carbon black and eight non-carbon black polymer types. By number and the carbon black particles accounted for up to 68% of the microplastics (average 30%), this stress the importance of using analytical methods enabling the detection of both carbon-black and non-carbon black microplastics. Furthermore, the results indicate that gully pots can act as temporary sinks for microplastics, mainly for microplastics larger than 125 μm. The amount of microplastics found in gully pots, together with the very large number of gully pots sited in urban areas, indicates that gully pots can potentially trap large amounts of microplastics, and thus if gully pots are fitted and maintained properly they could significantly contribute to reducing the amount of microplastics reaching receiving waters.

Revealing soil microbial ecophysiological indicators in acidic environments laden with heavy metals via predictive modeling: Understanding the impacts of black diamond excavation

Appraising the activity of soil microbial community in relation to soil acidity and heavy metal (HM) content can help evaluate it's quality and health. Coal mining has been reported to mobilize locked HM in soil and induce acid mine drainage. In this study, agricultural soils around coal mining areas were studied and compared to baseline soils in order to comprehend the former's effect in downgrading soil quality. Acidity as well as HM fractions were significantly higher in the two contaminated zones as compared to baseline soils (p < 0.01). Moreover, self-organizing and geostatistical maps show a similar pattern of localization in metal availability and soil acidity thereby indicating a causal relationship. Sobol sensitivity, cluster, and principal component analyses were employed to enunciate the relationship between the various metal and acidity fractions with that of soil microbial properties. The results indicate a significant negative impact of metal bioavailability, and acidity on soil microbial activity. Lastly, Taylor diagrams were employed to predict soil microbial quality and health based on soil physicochemical inputs. The efficiency of several machine learning algorithms was tested to identify Random Forrest as the best model for prediction. Thus, the study imparts knowledge about soil pollution parameters, and acidity status thereby projecting soil quality which can be a pioneer in sustainable agricultural practices.

Review and assessment of road-derived metals as a major contributor of metallic contaminants to urban stormwater and the estuarine environment (Sydney estuary, Australia)

Sydney Harbour (Australia). is one of the most metal-contaminated in the world and sediments are toxic over large areas. The major source of metals is stormwater, however there remains considerable debate regarding the source of metals in water entering the estuary. The current review and critical assessment of a large source of data accumulated from over three decades of research, supplemented by global studies, identified road-derived metals (RDMs) as the chief contributor of metals to stormwater and consequently to pollution of the estuary. Roads comprise almost 25% of a typical urban catchment and generate a considerable metal load from highly effective impervious surfaces and RDM is transported directly to the adjacent receiving basin with enhanced connectivity. In Sydney, industrial waste is delivered to the sewage system and is disposed of offshore, leaving RDM as a major contributor of metals to the stormwater system and estuarine environment. RDMs are modelled to be hazardous to the ecology and human health (carcinogenic and non-carcinogenic diseases) in the catchment environment driven by high metal concentrations, small size and elevated bioavailability. Remediation of RDMs is complex, requiring extensive knowledge and an experienced management team. The enormous potential for water re-use is often neglected.

Influence of seasonal activities and traffic conditions on the accumulation and particle size distribution of gully pot sediments

Gully pots (GPs) are ubiquitously used in urban catchments, to direct surface runoff into piped sewer systems, reduce the risk of sediment-induced pipe blockages and the loading of solids and associated contaminants on the receiving waters. Over time, the build-up of sediments in GPs will lead to impaired hydraulic performance, putting the urban catchment at risk of flooding. However, GP maintenance strategies lack both a robust evidence base and clear aims against which their effectiveness can be benchmarked. An improved understanding of the factors influencing long-term in-situ solids accumulation in GPs is required for further assessment and optimisation of the GP maintenance scheme. As a contribution to addressing these knowledge gaps, sediments from 27 GPs located in urban catchments associated with three street feature types (roundabout; crossing; straight road) and varied traffic intensities were collected on two occasions, representing two distinct seasonal accumulation periods. Parameters including GP fullness levels, particle size distribution (PSD), and solids mass accumulation rates were evaluated with regards to the impacts of seasonal activities, traffic conditions as well as configuration and dimension of GPs. The results indicate impacts of seasonal activities on solids accumulation rates were not consistent across all GPs, with the magnitude of the difference larger following winter-spring catchment practices. Additionally, synergistic impacts of seasonal activities and traffic conditions on PSD and solids accumulation rates were observed. For example, the winter road safety measures may enhance the impacts of the characteristic vehicle turning motions at roundabouts, contributing to the negative correlation identified between traffic intensities and solids accumulation rates. The overall exhibited large variations in sump fullness levels (4 %-73 %) and solids dry mass (0.5-51 kg) directly challenged the commonly adopted generalised GP maintenance frequency without taking the catchment-specific activities into consideration.

Accumulation and contamination of gully pot sediments from varied land-use types: metal loads, concentrations and speciation

Urban stormwater typically enters sewer networks through gully pots, which allow a primary sedimentation of solids upstream of the piped network. The regular removal and disposal of retained sediment are necessary, costly and can involve environmental risks due to the contamination of sediments with substances from the urban environment such as metals. The concentrations and speciation of Cd, Cr, Cu, Ni, Pb and Zn were analysed in sediments from 26 gully pots located in different land use areas in Stockholm, Sweden. In addition, accumulation rates of both sediment and metal masses were evaluated, providing a basis for optimising maintenance practices and better understanding of impacts of characteristic urban land use types. Metal concentrations varied by at most a factor of eight between samples and were always below Swedish polluted site guidelines for less sensitive land use, with only eight samples exceeding the guideline values for Cu and Zn for sensitive land use. Sequential extraction showed Pb and Zn to be the most mobile metals. Sediment accumulation rates varied from 0.003 to 0.197 kg/m2 impermeable surface/year. Metal accumulation rates were much more variable than metal concentrations, with a factor of up to 172 between the highest and lowest rates and the highest metal accumulation rates corresponding to the lower range of mass loads in road runoff. Differences in metal concentrations, sediment or metal mass accumulations could not be solely attributed to either traffic or catchment land use. In contrast, traction grit used for winter road maintenance, which has low (but detectable) metal concentrations, is identified as a major component of gully pot sediments, with a combined effect of both moderating metal concentrations and contributing to total mass.

Concentrations of tire wear microplastics and other traffic-derived non-exhaust particles in the road environment

Tire wear particles (TWP) are assumed to be one of the major sources of microplastic pollution to the environment. However, many of the previously published studies are based on theoretical estimations rather than field measurements. To increase the knowledge regarding actual environmental concentrations, samples were collected and analyzed from different matrices in a rural highway environment to characterize and quantify TWP and other traffic-derived non-exhaust particles. The sampled matrices included road dust (from kerb and in-between wheeltracks), runoff (water and sediment), and air. In addition, airborne deposition was determined in a transect with increasing distance from the road. Two sieved size fractions (2-20 µm and 20-125 µm) were analyzed by automated Scanning Electron Microscopy/Energy Dispersive X-ray spectroscopy (SEM/EDX) single particle analysis and classified with a machine learning algorithm into the following subclasses: TWP, bitumen wear particles (BiWP), road markings, reflecting glass beads, metals, minerals, and biogenic/organic particles. The relative particle number concentrations (%) showed that the runoff contained the highest proportion of TWP (up to 38 %). The share of TWP in kerb samples tended to be higher than BiWP. However, a seasonal increase of BiWP was observed in coarse (20-125 µm) kerb samples during winter, most likely reflecting studded tire use. The concentration of the particle subclasses within airborne PM_80-1 decreases with increasing distance from the road, evidencing road traffic as the main emission source. The results confirm that road dust and the surrounding environment contain traffic-derived microplastics in both size fractions. The finer fraction (2-20 µm) dominated (by mass, volume, and number) in all sample matrices. These particles have a high potential to be transported in water and air far away from the source and can contribute to the inhalable particle fraction (PM₁₀) in air. This highlights the importance of including also finer particle fractions in future investigations.