Concerted regulation on vertical orientation and film quality of two-dimensional ruddlesden-popper perovskite layer for efficient solar cells

Rational Strategies to Improve the Efficiency of 2D Perovskite Solar Cells

In the quest for durable photovoltaic devices, 2D halide perovskites have emerged as a focus of extensive research. However, the reduced dimension in structure is accompanied by inferior optical-electrical properties, such as widened band gap, enhanced exciton binding energy, and obstructed charge transport. As a result, the efficiency of 2D perovskite solar cells (PSCs) lags significantly behind their 3D counterparts. To overcome these constraints, extensive investigations into materials and processing techniques are pursued rigorously to augment the efficiency of 2D PSCs. Herein, The cutting-edge delve into developments in 2D PSCs, with a focus on chemical and material engineering, as well as their structure and photovoltaic properties. The review starts with an introduction of the crystal structure, followed by the key evaluation criteria of 2D PSCs. Then, the strategies around solution chemical engineering, processing technique, and interface optimization, to simultaneously boost efficiency and stability are systematically discussed. Finally, the challenges and perspectives associated with 2D perovskites to provide insights into potential improvements in photovoltaic performance will be outlined.

Ionic Liquid Assisted Imprint for Efficient and Stable Quasi-2D Perovskite Solar Cells with Controlled Phase Distribution

Although two-dimensional perovskite devices are highly stable, they also lead to a number of challenges. For instance, the introduction of large organic amines makes crystallization process complicated, causing problems such as generally small grain size and blocked charge transfer. In this work, imprint assisted with methylamine acetate were used to improve the morphology of the film, optimize the internal phase distribution, and enhance the charge transfer of the perovskite film. Specifically, imprint promoted the dispersion of spacer cations in the recrystallization process with the assistance of methylamine acetate, thus inhibited the formation of low-n phase induced by the aggregation of spacer cations and facilitated the formation of 3D-like phase. In this case, the corresponding quasi-2D perovskite solar cells delivered improved efficiency and exhibited superior stability. Our work provides an effective strategy to obtain uniform phase distribution for quasi-2D perovskite.

Charge-Carrier Transport in Quasi-2D Ruddlesden-Popper Perovskite Solar Cells

In recent years, 2D Ruddlesden-Popper (2DRP) perovskite materials have been explored as emerging semiconductor materials in solar cells owing to their excellent stability and structural diversity. Although 2DRP perovskites have achieved photovoltaic efficiencies exceeding 19%, their widespread use is hindered by their inferior charge-carrier transport properties in the presence of diverse organic spacer cations, compared to that of traditional 3D perovskites. Hence, a systematic understanding of the carrier transport mechanism in 2D perovskites is critical for the development of high-performance 2D perovskite solar cells (PSCs). Here, the recent advances in the carrier behavior of 2DRP PSCs are summarized, and guidelines for successfully enhancing carrier transport are provided. First, the composition and crystal structure of 2DRP perovskite materials that affect carrier transport are discussed. Then, the features of 2DRP perovskite films (phase separation, grain orientation, crystallinity kinetics, etc.), which are closely related to carrier transport, are evaluated. Next, the principal direction of carrier transport guiding the selection of the transport layer is revealed. Finally, an outlook is proposed and strategies for enhancing carrier transport in high-performance PSCs are rationalized.

Solvent-assisted crystallization of two-dimensional Ruddlesden-Popper perovskite

Two dimensional (2D) perovskite materials, are more stable than 3D perovskite materials, which could solve the stability issue of perovskite solar cells (PSCs). However, the photovoltaic conversion efficiency (PCE) of PSCs based on 2D perovskite materials was low, due to the high dielectric and quantum confinement of 2D perovskite. In this work, we propose a solvent-assisted method to prepare 2D perovskite films, where the solvent was distributed in a gradient. Therefore, the top-down crystallization process of 2D perovskite can be accurately controlled. The PCE of PSCs fabricated by the solvent-assisted method was enhanced by 48%, compared with the control device. For the packaged devices, the stability test demonstrated that 94% of the initial PCE was still maintained after 1500 hours of storage (25 °C, RH 40%). After carefully analyzing the photophysical process of the carriers in the PSCs based on 2D perovskite, the enhanced carrier transfer mechanism of the solvent-assisted method has been proposed.

Oriented Halide Perovskite Nanostructures and Thin Films for Optoelectronics

Oriented semiconductor nanostructures and thin films exhibit many advantageous properties, such as directional exciton transport, efficient charge transfer and separation, and optical anisotropy, and hence these nanostructures are highly promising for use in optoelectronics and photonics. The controlled growth of these structures can facilitate device integration to improve optoelectronic performance and benefit in-depth fundamental studies of the physical properties of these materials. Halide perovskites have emerged as a new family of promising and cost-effective semiconductor materials for next-generation high-power conversion efficiency photovoltaics and for versatile high-performance optoelectronics, such as light-emitting diodes, lasers, photodetectors, and high-energy radiation imaging and detectors. In this Review, we summarize the advances in the fabrication of halide perovskite nanostructures and thin films with controlled dimensionality and crystallographic orientation, along with their applications and performance characteristics in optoelectronics. We examine the growth methods, mechanisms, and fabrication strategies for several technologically relevant structures, including nanowires, nanoplates, nanostructure arrays, single-crystal thin films, and highly oriented thin films. We highlight and discuss the advantageous photophysical properties and remarkable performance characteristics of oriented nanostructures and thin films for optoelectronics. Finally, we survey the remaining challenges and provide a perspective regarding the opportunities for further progress in this field.