Improving photovoltaic parameters of all-polymer solar cells through integrating two polymeric donors

Improving Photovoltaic Performance of All-Polymer Solar Cells by Adding an Amorphous B←N Embedded Polymer as the Third Component

Currently, most of the disclosed ternary strategies to improve photovoltaic performance of all-polymer solar cells (all-PSCs) commonly focus on the guest polymers having similar structures with the host polymer donors or acceptors. Herein, this work develops a distinctive ternary method that adding an amorphous B←N embedded polymer named BN-Cl-2fT to a crystallized host polymer blend of PM6 (a commercialized polymer donor) and PY-TT (a copolymer of Y6 and thieno[3,2-b]thiophene). Although the structures between BN-Cl-2fT and PM6 and PY-TT are completely different, excellent miscibility is found between BN-Cl-2fT and both of the host PM6 and PY-TT, which can be interpreted by the crowded phenyl groups anchoring along the backbone of BN-Cl-2fT, leading to weak self-aggregation. Glazing incidence wide-angle X-ray diffraction (GIWAXS) measurements explicitly confirm the crystallization of PM6 and PY-TT and amorphous feature of BN-Cl-2fT. Furthermore, adding 10 wt% BN-Cl-2fT to PM6:PY-TT can significantly enhance the crystallization of the host polymers. Thus the ternary devices based on PM6:PY-TT:BN-Cl-2fT afford promote short-circuit current density (JSC , 23.29 vs. 21.80 mA cm-2 ), fill factor (FF, 62.4% vs. 60.0%), and power conversion efficiency (PCE, 13.70% vs. 12.23%) in contrast to these parameters of binary devices based on PM6:PY-TT. This work provides a unique and enlightening avenue to design high performance all-PSCs by adding amorphous B←N embedded polymers as guest component to enhance host-crystallization.

Unveiling the Morphological and Physical Mechanism of Burn-in Loss Alleviation by Ternary Matrix Toward Stable and Efficient All-Polymer Solar Cells

All-polymer solar cells (All-PSCs) are considered the most promising candidate in achieving both efficient and stable organic photovoltaic devices, yet the field has rarely presented an in-depth understanding of corresponding device stability while efficiency is continuously boosted via the innovation of polymer acceptors. Herein, a ternary matrix is built for all-PSCs with optimized morphology, improved film ductility and importantly, boosted efficiency and better operational stability than its parental binary counterparts, as a platform to study the underlying mechanism. The target system PQM-Cl:PTQ10:PY-IT (0.8:0.2:1.2) exhibits an alleviated burn-in loss of morphology and efficiency under light soaking, which supports its promoted device lifetime. The comprehensive characterizations of fresh and light-soaked active layers lead to a clear illustration of opposite morphological and physical degradation direction of PQM-Cl and PTQ10, thus resulting in a delicate balance at the optimal ternary system. Specifically, the enlarging tendency of PQM-Cl and shrinking preference of PTQ10 in terms of phase separation leads to a stable morphology in their mixing phase; the hole transfer kinetics of PQM-Cl:PY-IT host is stabilized by incorporating PTQ10. This work succeeds in reaching a deep insight into all-PSC's stability promotion by a rational ternary design, which booms the prospect of gaining high-performance all-PSCs.

Linear Regulating of Polymer Acceptor Aggregation with Short Alkyl Chain Units Enhances All-Polymer Solar Cells' Efficiency

The power conversion efficiency (PCE) of all-polymer solar cells (all-PSCs) has ascended rapidly arising from the development of polymerized small-molecule acceptor materials. However, numerous insulating long alkyl chains, which ensure the solubility of the polymer, result in inferior aggregation and charge mobility. Herein, this study proposes a facile random copolymerization strategy of two small molecule acceptor units with different lengths of alkyl side chains and synthesizes a series of polymer acceptors PYT-EHx, where x is the percentage of the short alkyl chain units. The aggregation strength and charge mobility of the acceptors rise linearly with increasing the proportion of short alkyl chain units. Thus, the PYT-EH20 reaches balanced aggregation with the star polymer donor PBDB-T, resulting in optimal morphology, fastest carrier transport, and reduced recombination and energy loss. Consequently, the PYT-EH20-based device yields a 14.8% PCE, a 16% improvement over the control PYT-EH0-based device, accompanied by an increase in open-circuit voltage (V_oc ), short-circuit current density (J_sc ), and fill factor (FF). This work demonstrates that the random copolymerization strategy with short alkyl chain insertion is an effective avenue for developing high-performance polymer acceptors, which facilitates further advances in the efficiency of all-PSCs.

Improved Molecular Ordering in a Ternary Blend Enables All-Polymer Solar Cells over 18% Efficiency

Although all-polymer solar cells (all-PSCs) show great commercialization prospects, their power conversion efficiencies (PCEs) still fall behind their small molecule acceptor-based counterparts. In all-polymer blends, the optimized morphology and high molecular ordering are difficult to achieve since there is troublesome competition between the crystallinity of the polymer donor and acceptor during the film-formation process. Therefore, it is challenging to improve the performance of all-PSCs. Herein, a ternary strategy is adopted to modulate the morphology and the molecular crystallinity of an all-polymer blend, in which PM6:PY-82 is selected as the host blend and PY-DT is employed as a guest component. Benefiting from the favorable miscibility of the two acceptors and the higher regularity of PY-DT, the ternary matrix features a well-defined fibrillar morphology and improved molecular ordering. Consequently, the champion PM6:PY-82:PY-DT device produces a record-high PCE of 18.03%, with simultaneously improved open-circuit voltage, short-circuit current and fill factor in comparison with the binary devices. High-performance large-area (1 cm² ) and thick-film (300 nm) all-PSCs are also successfully fabricated with PCEs of 16.35% and 15.70%, respectively.Moreover, 16.5 cm² organic solar module affords an encouraging PCE of 13.84% when using the non-halogenated solvent , showing the great potential of "Lab-to-Fab" transition of all-PSCs.

Fine-tuned Morphology Based on Two Well-miscible Polymer Donors Enables Higher Open-circuit Voltage and Enhanced Stability for Highly Efficient Ternary All-Polymer Solar Cells

Developing organic solar cells (OSCs) based on a ternary active layer by simply incorporating a third component is one of the most effective approaches to improve their photovoltaic performance. However, limited success has been achieved in all-polymer solar cells (all-PSCs). In this study, a ternary all-PSC with improved efficiency and stability is realized by using J71 as the third component to adjust the host system of PBDB-T:PG1. The deeper highest occupied molecular orbital (HOMO) energy level of J71 downshifts the mixed HOMO energy levels of donors. The two polymer donors (P_D s) have good miscibility and present Förster resonance energy transfer. When blended with PG1, the optimized morphology is obtained, showing enhanced crystallinity but meanwhile slightly reduced phase separation with improved exciton dissociation and collection efficiency, suppressed monomer and bimolecular recombination, and reduced energy loss (0.55 eV). Combining the benefits mentioned above, the ternary all-PSC exhibits an excellent efficiency of 12.8% with simultaneously elevated open-circuit voltage (0.96 V), short-circuit current density (18.4 mA cm^-2 ), and fill factor (72.2%) when compared with binary devices. Moreover, the optimized ternary all-PSC shows improved storage stability and thermal stability. This study demonstrates that the utilization of a ternary all-polymer system based on two well-miscible P_D s is an effective strategy to enhance the photovoltaic performance and stability of all-PSCs. This article is protected by copyright. All rights reserved.

Tailoring the Morphology's Microevolution for Binary All-Polymer Solar Cells Processed by Aromatic Hydrocarbon Solvent with 16.22% Efficiency

Herein, we report a systematic solvent selection for eco-friendly processed binary all-polymer solar cells (APSCs) with decent power conversion efficiencies (PCEs). Three typical solvents, toluene, o-xylene, and 1,2,4-trimethylbezene, are chosen and compared. The device enabled by o-xylene exhibits the most outstanding PCE of 16.22%, thanks to its favorable morphology, which is to say a well-formed face-on orientation packing motif and a suitable crystallinity and size of phase segregation. Consequently, the solar cell affords sufficient charge generation, as well as efficient and balanced charge transport, which are all positive to pursuing high efficiency. This work offers an understanding of using complete solvent selection as the strategy to realize high-performance devices by sophisticatedly controlling the morphology.

Meniscus-Assisted Coating with Optimized Active-Layer Morphology toward Highly Efficient All-Polymer Solar Cells

Morphology control is the key to engineering highly efficient solution-processed solar cells. Focusing on the most promising application-oriented photovoltaic all-polymer solar cells (all-PSCs), herein a facile and effective meniscus-assisted-coating (MAC) strategy is reported for preparing high-quality blend films with enhanced crystallinity and an interpenetrating nanofiber network morphology. The all-PSCs based on MAC exhibit excellent optoelectronic properties with efficiencies exceeding 15%, which is the best performance of solution-printing-based all-PSCs, as well as better stability. The crystallization kinetics of the polymer blend film is investigated by in situ UV-vis absorption spectroscopy, and the result explains the linear relationship between the meniscus advance speed and the crystallinity (crystallization rate) of the polymer. To verify the compatibility and universality of this strategy, the MAC strategy is applied to the other three binary systems. By precisely controlling the meniscus advancing speed, 1 cm² all-PSC devices whose efficiencies exceed 12% are fabricated. Such progress demonstrates that the application of the MAC strategy is a promising approach for the fabrication of high-efficiency all-PSCs.