Design and performance of personal cooling garments based on three-layer laminates

Practical Considerations for Using Personal Cooling Garments for Heat Stress Management in Physically Demanding Occupations: A Systematic Review and Meta-Analysis Using Realist Evaluation

INTRODUCTION

Due to rising temperature extremes, workplaces are seeking new solutions, such as using personal cooling garments (PCG) to mitigate and manage workplace heat exposure. This systematic review sought to assess the physiological and perceptual effects of PCGs on workers in standard work clothing performing moderate-to-heavy intensity tasks in hot environments.

METHODS

A peer-reviewed search strategy was conducted in MEDLINE, Embase, CINAHL, Scopus, Global Health, and Business Source Complete with no language or time limits. A meta-analysis using a realist evaluation framework was then performed to evaluate the effectiveness of the PCGs.

RESULTS

Thirty-three studies with 764 participants (98% male; average 21 ± 34 participants per study), conducted primarily in a laboratory setting (76%) were included. The studies were 193 ± 190 min in duration and consisted of a moderate-to-heavy work effort of 3.3 ± 1.0 METs in hot ambient conditions (temperature: 35.9 ± 3.3°C, 51.4 ± 12.1% relative humidity, wet bulb globe temperature [WBGT] 31.2 ± 2.6°C). The PCGs (n = 67) facilitated heat exchange through conduction (n = 39), evaporation (n = 4), convection (n = 2), radiation (n = 2), or hybrid combinations (n = 20). Conductive and hybrid PCGs offered the greatest thermoregulatory benefit, whereby core temperature (Tc) and heart rate (HR) reductions were consistently observed (Conductive: Tc: -0.3°C, HR: -12 bpm; Hybrid: Tc:-0.2°C, HR: -10 bpm), while PCGs directed at enhancing evaporative and radiative heat exchange had no or minimal effect on the physiological outcomes assessed (i.e., TC < 0.1°C, HR: < 0.7 bpm).

CONCLUSION

While the PCGs had a positive overall effect, conductive options offered the most consistent benefit to workers. WBGT, clothing insulation, and duration of wear significantly affected some physiological and perceptual outcomes.

Minimizing polyphenols and enzymes degradation using hydrogel packaging with combined evaporative and daytime radiative cooling functions during ambient transportation

Polyphenols and enzymes usually suffer from degradation during transportation due to the lack of a cold chain system in developing countries and regions. In this study, anthocyanin and trypsin were selected as examples of polyphenols and enzymes and investigated for minimizing their degradation during ambient transportation using hydrogel packaging with combined evaporative and daytime radiative cooling functions. A polyacrylamide/polyvinyl alcohol contained with nanoparticles (NPs@PAAm/PVA) hydrogel packaging was thus developed. The NPs@PAAm/PVA packaging exhibited desirable swelling behaviour, high solar reflectance, and strong atmospheric emissivity to synergistically achieve evaporative and daytime radiative cooling. The indoor experiments indicated that the vial with NPs@PAAm/PVA packaging realised sub-ambient temperatures under different working temperatures and humidities, and the field tests indicated that the vial with NPs@PAAm/PVA packaging could effectively preserve the anthocyanin and trypsin without degradation caused by strong sunlight and high temperature. Consequently, the NPs@PAAm/PVA packaging with evaporative and daytime radiative cooling effects has promising prospects for anthocyanin and trypsin transportation in an energy-saving and sustainable manner.

Personal Thermal Management by Radiative Cooling and Heating

Maintaining thermal comfort within the human body is crucial for optimal health and overall well-being. By merely broadening the set-point of indoor temperatures, we could significantly slash energy usage in building heating, ventilation, and air-conditioning systems. In recent years, there has been a surge in advancements in personal thermal management (PTM), aiming to regulate heat and moisture transfer within our immediate surroundings, clothing, and skin. The advent of PTM is driven by the rapid development in nano/micro-materials and energy science and engineering. An emerging research area in PTM is personal radiative thermal management (PRTM), which demonstrates immense potential with its high radiative heat transfer efficiency and ease of regulation. However, it is less taken into account in traditional textiles, and there currently lies a gap in our knowledge and understanding of PRTM. In this review, we aim to present a thorough analysis of advanced textile materials and technologies for PRTM. Specifically, we will introduce and discuss the underlying radiation heat transfer mechanisms, fabrication methods of textiles, and various indoor/outdoor applications in light of their different regulation functionalities, including radiative cooling, radiative heating, and dual-mode thermoregulation. Furthermore, we will shine a light on the current hurdles, propose potential strategies, and delve into future technology trends for PRTM with an emphasis on functionalities and applications.

Combined Effects of Radiative and Evaporative Cooling on Fruit Preservation under Solar Radiation: Sunburn Resistance and Temperature Stabilization

Excessive solar radiation and high temperature often cause considerable loss and waste of fruits during transportation, retail, and storage. In the current study, a natural deep eutectic solvent-based polyacrylamide/poly(vinyl alcohol) hydrogel with nanoparticles (NPs/NADES@PAAm/PVA) is developed for fruit quality protection from solar radiation and high-temperature stress by achieving the combined effect of radiative and evaporative cooling. NPs/NADES@PAAm/PVA presents an average solar reflectance of ∼0.89 and an average emittance at the atmospheric window of ∼0.90. Besides, NPs/NADES@PAAm/PVA possesses excellent flexibility, robust mechanical strength, and good swelling behavior. The fruit preservation experiments under sunlight demonstrate that the pear (Pyrus sinkiangensis) treated with NPs/NADES@PAAm/PVA can achieve an average temperature decrease of ∼15.3 °C after sun exposure compared with the blank, and its quality-related attributes, including color, total soluble solid, relative conductivity, and respiration rate, are similar to the fresh one. Multivariate data analyses, including principal component analysis and cluster analysis, further verify that the pear treated with NPs/NADES@PAAm/PVA possesses similar quality to the fresh one after sun exposure. Thus, NPs/NADES@PAAm/PVA has promising prospects for fruit transportation, retail, and storage under solar radiation in a low-operation-cost and sustainable manner.

Thermoconductive, Moisture-Permeable, and Superhydrophobic Nanofibrous Membranes with Interpenetrated Boron Nitride Network for Personal Cooling Fabrics

Space cooling occupies a large portion of total building energy consumption, aggravating the energy crisis and restricting human sustainable development, thus an efficient and energy-saving personal cooling technology is in high demand. Recently, thermally conductive fillers, such as boron nitride (BN), are usually enriched to fibrous materials to construct thermal management textiles. However, these fabrication processes are complex and time-consuming, and the resultant materials fail to transmit moisture and resist liquid water. Herein, we develop a facile and scalable methodology to construct highly thermoconductive breathable superhydrophobic nanofibrous membranes to enhance the thermal management of textiles for personal cooling. The strategy causes boron nitride (BN) to be linked with each other along nanofibers, and thus the membranes contain well interpenetrated BN network and remain porous structure simultaneously, improving their thermal conductivity without sacrificing the moisture permeability. In addition, the membranes possess good resistance to water penetration and intriguing superhydrophobicity due to the synergistic effect of the hydrophobic polymeric matrix and improved roughness. As a consequence, the resultant membranes demonstrate outstanding hybrid active-passive cooling performance with ultrahigh in-plane thermal conductivity of 17.9 W m^-1 K^-1, cross-plane thermal conductivity of 0.29 W m^-1 K^-1, and high water vapor transmission (WVT) rate of 11.6 kg m^-2 day^-1, as well as excellent water repellency with water contact angle of 153° and high hydrostatic pressure of 32 kPa, indicating promising utility for the next generation of cooling fabrics.

A Numerical Analysis of the Cooling Performance of a Hybrid Personal Cooling System (HPCS): Effects of Ambient Temperature and Relative Humidity

Hybrid personal cooling systems (HPCS) incorporated with ventilation fans and phase change materials (PCMs) have shown its superior capability for mitigating workers' heat strain while performing heavy labor work in hot environments. In a previous study, the effects of thermal resistance of insulation pads, and latent heat and melting temperature of PCMs on the HPCS's thermal performance have been investigated. In addition to the aforementioned factors, environmental conditions, i.e., ambient temperature and relative humidity, also significantly affect the thermal performance of the HPCS. In this paper, a numerical parametric study was performed to investigate the effects of the environmental temperature and relative humidity (RH) on the thermal management of the HPCS. Five levels of air temperature under RH = 50% (i.e., 32, 34, 36, 38 and 40 °C) and four levels of environmental RH at two ambient temperatures of 36 and 40 °C were selected (i.e., RH = 30, 50, 70 and 90%) for the numerical analysis. Results show that high environmental temperatures could accelerate the PCM melting process and thereby weaken the cooling performance of HPCS. In the moderately hot environment (36 °C), HPCS presented good cooling performance with the maximum core temperature at around 37.5 °C during excise when the ambient RH ≤ 70%, whereas good cooling performance could be only seen under RH ≤ 50% in the extremely hot environment (40 °C). Thus, it may be concluded that the maximum environmental RH under which the HPCS exhibiting good cooling performance decreases with an increase in the environmental temperature.

Therapeutic Equipment for Brain-Hyperthermia Using Convective Spray Cooling

A new type of therapeutic equipment is designed herein, using concepts of convective heat transfer and spray cooling, to treat patients suffering from brain-hyperthermia. The equipment is aimed to provide emergency treatment in order to prevent disability or possible mortality because thermoregulatory system of the patients fails to maintain a homeostasis. The equipment uses noncontact method of forced convection, applied uniformly at body exteriors. The heat exchanger is designed to contain four independent pipe-sections with orifice openings around the body. The cool-air, maintained within ASHRAE’s thermal comfort bounds, is sprayed through the orifices. Design improvements have been made on the basis of image analysis of the flow. The boundary layer (BL) analysis has also been performed over a specially designed mannequin with induced hyperthermia characteristics. The testing indicates a decay of ∼6 °C in 280 min with a time constant of 2 h. Comparative to existing techniques, in addition to being a noncontact approach, the equipment shows better thermoregulatory performance along with a flexibility to accommodate different body contours.

Effect of the cooling suit method applied to individuals with multiple sclerosis on fatigue and activities of daily living

AIMS AND OBJECTIVES

To determine the effects of cooling suit on fatigue and activities of daily living of individuals with multiple sclerosis.

BACKGROUND

Fatigue is one of the most common symptoms in people with multiple sclerosis and adversely affects their activities of daily living. Studies evaluating fatigue associated with multiple sclerosis have reported that most of the fatigue cases are related to the increase in body temperature and that cooling therapy is effective in coping with fatigue.

DESIGN

This study used a two sample, control group design.

METHODS

The study sample comprised 75 individuals who met the inclusion criteria. Data were collected with study forms. After the study data were collected, cooling suit treatment was administered to the experimental group. During home visits paid at the fourth and eighth weeks after the intervention, the aforementioned scales were re-administered to the participants in the experimental and control groups.

RESULTS

The analyses performed demonstrated that the severity levels of fatigue experienced by the participants in the experimental group wearing cooling suit decreased. The experimental group also exhibited a significant improvement in the participants' levels of independence in activities of daily living.

CONCLUSIONS

The cooling suit worn by individuals with multiple sclerosis was determined to significantly improve the participants' levels of fatigue and independence in activities of daily living.

RELEVANCE TO CLINICAL PRACTICE

The cooling suit therapy was found to be an effective intervention for the debilitating fatigue suffered by many multiple sclerosis patients, thus significantly improving their level of independence in activities of daily living.

Self-Sealing and Puncture Resistant Breathable Membranes for Water-Evaporation Applications

Breathable and waterproof membranes that self-seal damaged areas are prepared by modifying a poly(ether ester) membrane with an amphiphilic polymer co-network. The latter swells in water and the gel closes punctures. Damaged composite membranes remain water tight up to pressures of at least 1.6 bar. This material is useful for applications where water-vapor permeability, self-sealing properties, and waterproofness are desired, as demonstrated for a medical cooling device.