Characterisation and Skin Distribution of Lecithin-Based Coenzyme Q10-Loaded Lipid Nanocapsules

Plant Oil Nano-Emulsions as a Potential Solution for Pest Control in Sustainable Agriculture

The increasing demand for sustainable and eco-friendly pest control methods has led to a growing interest in the development of novel, plant-based pesticides. In this study, we investigated the potential of nano-emulsions containing plant oils (Portulaca oleracea, Raphanus sativus, and Rosmarinus officinalis) as a new approach for controlling three major pests: Aphis gossypii, Spodoptera littoralis, and Tetranychus urticae. Using ultrasonication, we prepared stable and uniform nano-emulsions characterized by thermodynamic properties, dynamic light scattering (DLS), and transmission electron microscopy (TEM). The results showed that the nano-emulsions were effective in controlling the three pests, with the most potent activity observed against Aphis gossypii. Our findings suggest that plant oil nano-emulsions have the potential to be used as a sustainable and eco-friendly alternative to traditional pesticides. The use of these nano-emulsions could provide a new approach to manage pest populations, reducing the environmental impact of pesticide use, and promoting sustainable agriculture.

Advancing coenzyme Q10 delivery with plant protein-based nanoparticle-mediated nanosuspensions

Coenzyme Q10 (CoQ10) possesses significant health-promoting potential, yet its oral delivery encounters obstacles stemming from its distinctive physicochemical characteristics, such as poor solubility, sensitivity to environmental factors and low bioaccessibility. To overcome these challenges, we developed high-payload CoQ10 nanosuspensions (CQ@SPNP, CQ@RPNP, and CQ@WPNP) using plant-based protein nanoparticles (NPs) derived from soybean (SPNP), rice (RPNP), and walnut (WPNP). The nanosuspensions include spherical particles, characterized by small particle size (<230 nm), low polydispersity (PDI < 0.15), and a high zeta potential (<-44 mV). CoQ10 loading capacity exceeded 70.3 %, with an encapsulation efficiency of over 77.4 %. CoQ10 interacted with plant protein-based NPs via hydrophobic effect without losing its crystal structure. Moreover, SPNP, RPNP, and WPNP significantly increased the stability of CoQ10 nanosuspensions against light, heat, long-term storage, and in vitro digestion. In particular, CQ@WPNP exhibited the highest stability and CoQ10 bioaccessibility post-digestion. The observed increases in stability and bioaccessibility were closely related to the specific NPs utilized. This study highlights the potential of plant protein-based NPs in addressing challenges of CoQ10 delivery, offering a promising approach to improve its efficacy.

Novel radioiodinated desvenlafaxine-loaded lipid nanocapsule for brain delivery

Lipid nanocapsules (LNCs) are lipid nanocarriers developed for drug delivery enhancement. The antidepressant drug desvenlafaxine (DSV) was entrapped in LNC to improve its brain delivery. Different DSV-loaded LNCs formulae using different oils and surfactants were studied to obtain the optimum formula for further studies. In vivo biodistribution studies were done using Swiss albino mice by intravenous injection of DSV-loaded LNCs by radioiodination technique. The optimum DSV-loaded LNC formula was obtained by using Labrafil® M1944CS as the oil and Solutol® HS15 as the surfactant in the ratio of 1:1, with a particle size of 34.28 ± 0.41 nm, a polydispersity index of 0.032 ± 0.05, a zeta potential of -25.77 ± 1.41, and good stability for up to 6 months. The in vivo biodistribution and pharmacokinetics data ensure the bioavailability improvement for DSV brain delivery as Cmax and AUC(1-t) increased more than double for intravenously DSV-loaded LNCs compared with the DSV solution. In conclusion, the results obtained from this study give an insight into the great potential of using DSV-loaded LNC for the enhancement of brain delivery.

Development of Novel Lipid-Based Formulations for Water-Soluble Vitamin C versus Fat-Soluble Vitamin D3

The aim of this study was to develop a facile and novel lipid-based formulation of vitamin C and vitamin D3. Liposomes loaded with vitamin C and D3 were characterized using transmission electron microscopy (TEM) and zeta potential measurements for evaluating morphology, particle size and physical stability. HPLC was employed to quantify the content of vitamin C and vitamin D3 in their liposomal forms. The UHPLC analysis of the lipid-based vitamin formulation is an easy and rapid method for the characterization as well as the quantification of all components. In addition, encapsulation efficiency, vitamin loading and stability analysis were performed by the UHPLC method, in order to evaluate the reliability of the optimized lipid-based formulation. The TEM results provided key support for the core type of liposome structure in the formulations, whereas the HPLC results indicated that the liposomal vitamin C and D3 systems were homogeneous, and did not undergo phase separation. Taken together, the results demonstrate that liposomal encapsulated vitamins (vitamin C and D3) possess a unilamellar vesicle morphology with uniform particle size, despite differences in the hydrophile-lipophile profiles of the vitamins. The highly efficient encapsulation properties of such liposomal constructs are proposed to contribute to enhanced vitamin bioavailability.

Hollow microneedle assisted intradermal delivery of hypericin lipid nanocapsules with light enabled photodynamic therapy against skin cancer

Photodynamic therapy (PDT) to manage non-melanoma skin cancers has garnered great attention over the past few years. Hypericin (Hy) is a potent lipid-soluble photosensitiser with promising anticancer therapeutic activities. Nevertheless, its poor water-solubility, aggregation in biological systems and insufficient skin penetration restricted its effective exploitation. Herein, we report for the first-time encapsulation of Hy into lipid nanocapsules (Hy-LNCs), and then application of an AdminPen™ hollow microneedles (Ho-MNs) array and an in-house fabricated Ho-MN to enable efficient intradermal delivery. The physicochemical properties, photoactivity, ex vivo drug distribution and cellular uptake were evaluated. Results showed that Hy-LNCs were successfully formed with a particle size of 47.76 ± 0.49 nm, PDI of 0.12 ± 0.02, high encapsulation efficiency (99.67% ± 0.35), 396 fold higher photoactivity, 7 fold higher skin drug deposition, significantly greater cellular uptake and higher photocytotoxicity compared to free Hy. The therapeutic effect of Hy-LNCs was finally assessed in vivo using a nude mouse model with transplanted tumours. Interestingly, Hy-LNCs delivered by Ho-MN exhibited remarkable anti-tumour destruction (85.84%) after irradiation with 595 nm. This study showed that Ho-MNs-driven delivery of Hy-LNCs followed by irradiation could form a promising minimally invasive, effective and site-specific approach for managing non-melanoma skin cancers.

Preparation and Characterization of Nanostructured Lipid Carrier (NLC) and Nanoemulsion Containing Vitamin D3

Vitamin D is an essential vitamin for bone marrow development and immune function, which is mostly synthesized in the skin through sun exposure. The high global prevalence of vitamin D deficiency requires a feasible approach to administer vitamin D to a larger number of population in a shorter amount of time, and this may be achieved through food fortification. Food fortification using nanostructured lipid carriers (NLC) and nanoemulsions appears to be an ideal method to enhance bioavailability, stability, and solubility of bioactive compounds. The aim of this study was to develop NLC and nanoemulsion forms of vitamin D to evaluate its efficacy for further enrichment of dairy products. NLC containing Precirol and nanoemulsion containing vegetable oils were prepared and characterized for polydispersity index, particle size, zeta potential, particle shape, crystal properties, stability, encapsulation efficiency, and releasing. Vitamin D3 NLC size was in the range of 123.4 to 210.6 nm and for nanoemulsion 137.6 to 171.6 nm, respectively. Optimal NLC and nanoemulsion carriers were selected for morphological assessment, encapsulation efficiency, thermal analysis, and release study. Scanning and transmission electron microscopy revealed that particles had approximately spherical shape. In gastric simulated solution (pH = 1.2), NLC and nanoemulsion form of vitamin D3 released 9.3% and 26.9% of vitaminD3, respectively. This indicated that our formulation is able to protect vitamin D3 under acidic conditions. The results of this study revealed that NLC and nanoemulsion could be an optimal carrier for food fortification in order to improve bioavailability of bioactive compounds such as vitamin D.

Investigation of ex vivo Skin Penetration of Coenzyme Q10 from Microemulsions and Hydrophilic Cream

INTRODUCTION

Coenzyme Q10 (CoQ10) has been widely used in topical and cosmeceutical products due to its cutaneous antioxidant and energizer effects. CoQ10 is found in a higher concentration in the epidermis compared to dermis. The epidermal level of CoQ10 can be reduced due to several factors such as skin UV irradiation and photoaging. Various dermal nano-formulations have been investigated to overcome the skin barrier and enhance the poor penetration of CoQ10. The nanocarriers are designed to target and concentrate the CoQ10 in the viable epidermis. Most of these studies, however, failed to show the depth and extent of penetration of CoQ10 from the various carrier systems.

OBJECTIVE

The distribution of CoQ10 across the various skin layers has to be shown using skin slices representing the different skin layers.

METHODS

To realize this objective, a sensitive and selective HPLC method was developed and validated for the quantification of CoQ10 in the different skin slices. The method applicability to skin penetration (using excised human skin) as well as stability studies was investigated using CoQ10-loaded lecithin-based microemulsion (ME) and hydrophilic cream formulations.

RESULTS

It could be shown that the highest concentration of CoQ10 in the viable epidermis, the target skin layer for CoQ10, was observed after application of the CoQ10 in the hydrophilic cream. This cream contains 10% of 2-ethylhexyl laurate which works obviously as a penetration enhancer for CoQ10. In contrast, the penetration of CoQ10 was lower from the ME. Just in the deeper dermis, a certain amount of CoQ10 could be detected.

CONCLUSIONS

The HPLC method quantified the trace quantities of the CoQ10 distributed across the various skin layers and, hence, can be used to investigate the skin penetration of CoQ10 from various dermal standard and nano-formulations.

Dendrimer-like glucan nanoparticulate system improves the solubility and cellular antioxidant activity of coenzyme Q10

Aqueous coenzyme Q10 (CoQ10) dispersions were prepared using sugary maize dendrimer-like glucan (SMDG) with solid-dispersion treatment. After measuring solubility, recovery rate and loading rate, the initial weight ratio of CoQ10:SMDG was optimized to be 1:27, with the solubility markedly increasing up 188.8-folds compared to pure CoQ10 solution. The structural characterizations of CoQ10-SMDG formulation showed crystal CoQ10 was entrapped in SMDG matrix for amorphous state, associated with the strong interactions with glucan chains. The antioxidant activity of CoQ10-SMDG was assessed via DPPH and FRAP assay. DPPH scavenging activity and FRAP value of it were as high as 95.1% and 0.87 mM, respectively. The cellular uptake of CoQ10 in CoQ10-SMDG group was significantly higher than that of natural CoQ10. CoQ10-SMDG also exhibited significant protective effects against cellular damage in H₂O₂-induced HaCaT cell model. The results indicated that dendrimer-like glucan is an excellent platform to encapsulate and improve biological activity of hydropholic compounds.

Fabrication of nano-structured lipid carrier for encapsulation of vitamin D3 for fortification of 'Lassi'; A milk based beverage

A phase inversion based cold water dilution method was developed to encapsulate Vitamin D₃ (Vit D) in nano-structured lipid carrier (NLC) by blending caprylic-/capric triglyceride, Leciva S70 and Kolliphor HS®15, Vit D and sodium chloride. To optimize the process; a total of forty one formulations prepared by varying in their composition were tested for presence of NLC. Out of forty one formulations, only thirteen formulations resulted in NLC formation which were further evaluated for their physico-chemical attributes (particle size, zeta potential, transmittance, encapsulation efficiency and Vit D release). During principal component analysis using XLstats it was found that NLC-19, fabricated with 20% (v/v) Kolliphor, 20% (v/v) CCTG and 60% (v/v) water, 2.5% (w/v) Leciva, 2% (w/v) Vit D and 5% (w/v) sodium chloride was the most suitable for purpose of encapsulating Vitamin D. Hence, NLC-19 formulation was further taken up for stability studies under the following environmental stress conditions: (a) Temperature and humidity: accelerated condition: 45 ± 2 °C and RH 75 ± 5%, ambient condition: 25 ± 3 °C and RH 65 ± 5% and refrigerated condition: 6 ± 2 °C and RH 55 ± 5%, (b) pH: 3, 4, 5, 6, and 7, and (c) Ionic strength (NaCl concentration): 0 mM, 250 mM, 500 mM and 750 mM. The sensory evaluation of 'Lassi' (fortified with NLC-19) and its acceptability further confirmed the suitability of NLC-19 for the purpose of fortification of Vitamin D₃ in 'Lassi' (A milk based beverage).

Ultrasonic/sonochemical synthesis and evaluation of nanostructured oil in water emulsions for topical delivery of protein drugs

Delivery of drugs and active agents to human skin by formulation containing nanosystems have shown remarkable advance in recent nanotechnology research. The aim of current investigation is to study protein drug, extracted from medicinal leech tissue and evaluate an isotropic and kinetically stable nanoemulsion formulation, with least surfactant and co-surfactant concentrations also with optimal solubility and stability, for topical delivery. It is a fact that physical properties of oil phase has an impact on nanoemulsion formation and stabilization. In this research, various factors, such as oil types (olive oil and sesame oil) and oil content for their effects on particle size and stability of protein nanoemulsion were first investigated. Secondly, optimized formulation of protein nanoemulsion was characterized by droplet size and zeta potential analysis, Transmission electron microscopy (TEM), viscosity, pH, and refractive index. Thirdly, stability studies were done to select the best formulation. The results of our experiments showed that an increase in the concentration of olive oil and sesame oil led to a nanoemulsion with smaller size of droplets and with higher stability, respectively. However; slight variations in droplet size were observed in case of nanoemulsion with olive oil. As a result of various experiments, a Nanoemulsion with 25% olive oil was selected as optimized formulation owing to its much smaller droplet size (143.1 nm), lower polydispersity index, higher zeta potential (-33.3 mV). No considerable changes in droplet size, viscosity and pH occurred during a 30-day storage period at 4 °C. This procedure also suggested that our selected nanoemulsion was physically stable. Additionally, TEM revealed that particles were morphologically spherical. In conclusion, our analyses of the experiments proved the fact that nanoemulsions are promising novel formulations for protein drugs and can greatly enhance stability of protein drugs.

A phase inversion based nanoemulsion fabrication process to encapsulate vitamin D3 for food applications

A phase inversion based nanoemulsion fabrication process was developed to encapsulate vitamin D₃ by blending caprylic-/capric triglyceride (CCTG), Leciva S70, Kolliphor® HS 15, vitamin D₃ and aqueous phase (sodium chloride solution). In order to find out nanoparticle formation zone (NFZ), a ternary diagram was plotted with 41 possible combinations of three components CCTG, Kolliphor® HS 15 and aqueous phase. Out of forty one, only twelve combinations resulted in formation of stable nanoemulsion where the composition varied between 10%-40% (v/v), 10%-25% (v/v) and 35%-80% (v/v) for Kolliphor, CCTG and water respectively. Further, these 12 nanoemulsions were investigated for their particle size, zeta potential, emulsion stability, encapsulation efficiency and release kinetics (simulated digestion) of vitamin D. The nanoemulsion (NE-20) fabricated with 30% (v/v) Kolliphor, 20% (v/v) CCTG and 50% (v/v) aqueous phase was found to be the most suitable with respected to zeta potential, emulsion stability and encapsulation efficiency and also demonstrated high bioavailability of vitamin D as compared to other combinations and hence was selected for further physiochemical studies. The selected nanoemulsion was also investigated for particle size and zeta potential and stability of vitamin D₃ retention under different environmental stress conditions (i) temperature and humidity: (a) accelerated condition: 45 ± 2 °C and RH 75 ± 5%, (b) ambient condition: 25 ± 3 °C and RH 65 ± 5% and (c) refrigerated condition: 6 ± 2 °C and RH 55 ± 5% (ii) pH (3-7) under refrigerated condition and (iii) ionic strength: NaCl concentration (0 mM, 250 mM, 500 mM and 750 mM) under crefrigerated condition. Fourier transform infrared spectroscopy and High Perfomance Liquid Chromatograpy technique were used to study physico-chemical stability of encapsulated vitamin D₃ in the developed nanoemulsion. The sensory evaluation also indicated the acceptability of the selected nanoemulsion the purpose of fortification for beverages.

In vitro evaluation of chitosan-coated liposome containing both coenzyme Q10 and alpha-lipoic acid: Cytotoxicity, antioxidant activity, and antimicrobial activity

BACKGROUND

Chitosan-coated liposome containing both coenzyme Q10 and alpha-lipoic acid (CCAL) was a novel multifunctional nano delivery system exhibited long-term stability at room temperature and high encapsulation efficiency. Which containing two kinds of antioxidants (coenzyme Q10 and alpha-lipoic acid) and two antibacterial agents (chitosan and alpha-lipoic acid). However, the further biocompatibility, such as cytotoxicity and antioxidant activity, and antimicrobial activity of CCAL, has not been systematically evaluated.

OBJECTIVES

This study aims to evaluate the cytotoxicity, antioxidant activity and antimicrobial activity of CCAL.

METHODS

This article evaluated the in vitro cytotoxicity and antioxidant activity of CCAL by CCK8 assay, and antimicrobial activity on Staphylococcus aureus and Escherichia coli was investigated.

RESULTS

For antioxidant activity study, CCAL displayed significant antioxidant effect when compared with control group (P<.01). Finally, CCAL also exhibited antimicrobial activity, and CCAL showed stronger bactericidal effect with Gram-positive bacteria than Gram-negative bacteria.

CONCLUSIONS

CCAL could be a potential antioxidant delivery system for cosmetics or pharmaceuticals without cytotoxicity and artificial preservatives free.

Nanoparticles and nanofibers for topical drug delivery

This review provides the first comprehensive overview of the use of both nanoparticles and nanofibers for topical drug delivery. Researchers have explored the use of nanotechnology, specifically nanoparticles and nanofibers, as drug delivery systems for topical and transdermal applications. This approach employs increased drug concentration in the carrier, in order to increase drug flux into and through the skin. Both nanoparticles and nanofibers can be used to deliver hydrophobic and hydrophilic drugs and are capable of controlled release for a prolonged period of time. The examples presented provide significant evidence that this area of research has - and will continue to have - a profound impact on both clinical outcomes and the development of new products.

Liquid crystal nanoparticle formulation as an oral drug delivery system for liver-specific distribution

Liquid crystal nanoparticles have been utilized as an efficient tool for drug delivery with enhanced bioavailability, drug stability, and targeted drug delivery. However, the high energy requirements and the high cost of the liquid crystal preparation have been obstacles to their widespread use in the pharmaceutical industry. In this study, we prepared liquid crystal nanoparticles using a phase-inversion temperature method, which is a uniquely low energy process. Particles prepared with the above method were estimated to be ~100 nm in size and exhibited a lamellar liquid crystal structure with orthorhombic lateral packing. Pharmacokinetic and tissue distribution studies of a hydrophobic peptide-based drug candidate formulated with the liquid crystal nanoparticles showed a five-fold enhancement of bioavailability, sustained release, and liver-specific drug delivery compared to a host-guest complex formulation.

Development and characterisation of a novel chitosan-coated antioxidant liposome containing both coenzyme Q10 and alpha-lipoic acid

This article describes the physicochemical properties of chitosan-coated liposomes containing skin-protecting agents, coenzyme Q10 and alpha-lipoic acid (CCAL). CCAL had a spherical shell-core structure and liposomes inverted the surface charge from negative to positive after coating with chitosan. Compared with the uncoated liposome, CCAL had higher zeta potential, larger droplet size and long-term stability. Fourier transform infrared spectroscopy (FTIR) study showed that the driving force for chitosan coating the liposomes was enhanced via hydrogen bonding and ionic bond force between the chitosan and the alpha-lipoic acid. While the encapsulation efficiency (EE) of alpha-lipoic acid also increased by interacting with the chitosan shell. In vitro antioxidant activity study showed an excellent hydroxyl radical scavenging activity of CCAL. In vitro release study displayed a sustained drug release, and in vitro penetration studies promoted the accumulation of drugs in rabbit skin.

A comparative evaluation of coenzyme Q10-loaded liposomes and solid lipid nanoparticles as dermal antioxidant carriers

Background

The effective delivery of coenzyme Q10 (Q10) to the skin has several benefits in therapy for different skin pathologies. However, the delivery of Q10 to deeper layers of skin is challenging due to low aqueous solubility of Q10. Liposomes and solid lipid nanoparticles (SLN) have many advantages to accomplish the requirements in topical drug delivery. This study aims to evaluate the influence of these nanosystems on the effective delivery of Q10 into the skin.

Methods

Q10-loaded liposomes (LIPO-Q10) and SLNs (SLN-Q10) were prepared by thin film hydration and high shear homogenization methods, respectively. Particle size (PS), polydispersity index (PI), zeta potential (ZP), and drug entrapment efficiency were determined. Differential scanning calorimetry analysis and morphological transmission electron microscopy (TEM) examination were conducted. Biocompatibility/cytotoxicity studies of Q10-loaded nanosystems were performed by means of cell culture (human fibroblasts) under oxidative conditions. The protective effect of formulations against production of reactive oxygen species were comparatively evaluated by cytofluorometry studies.

Results

PS of uniform SLN-Q10 and LIPO-Q10 were determined as 152.4 ± 7.9 nm and 301.1 ± 8.2 nm, respectively. ZPs were −13.67 ± 1.32 mV and −36.6 ± 0.85 mV in the same order. The drug entrapment efficiency was 15% higher in SLN systems. TEM studies confirmed the colloidal size. SLN-Q10 and LIPO-Q10 showed biocompatibility towards fibroblasts up to 50 μM of Q10, which was determined as suitable for cell proliferation. The mean fluorescence intensity % depending on ROS production determined in cytofluorometric studies could be listed as Q10 ≥ SLN-Q10 > LIPO-Q10.

Conclusion

The LIPO-Q10 system was able to enhance cell proliferation. On the contrary, SLN-Q10 did not show protective effects against ROS accumulation. As a conclusion, liposomes seem to have advantages over SLN in terms of effective delivery of Q10 to skin for antioxidant purposes.

In vitro characterization and growth inhibition effect of nanostructured lipid carriers for controlled delivery of methotrexate

The present study describes the design and characterization of nanostructured lipid carriers (NLCs) for controlled delivery of methotrexate (MTX). A series of NLCs with or without MTX were prepared using different ratios of liquid-lipid to solid-lipid and type and concentration of surfactants. The effect of different formulation parameters on the physical properties of NLCs, entrapment efficiency of MTX and in vitro drug release was evaluated. In addition, the in vitro delivery and cytotoxicity of MTX-loaded NLCs against human prostate cancer DU-145 cells and ovarian human cancer A2780 cells were investigated. Drug loading capacity, particle size and surface charge of the prepared NLCs and the in vitro MTX release were affected by the formulation parameters. In vitro growth inhibition assay using DU-145 and A2780 cancer cell lines showed that drug-free NLCs maintained cell viability while MTX-loaded NLCs inhibited the growth of both cell lines. In addition, MTX-loaded NLCs showed superior inhibitory effect on cell growth over the free drug especially in A2780 cell lines and a higher cytotoxic effect on DU-145 at higher drug concentration. The results of the current study warrant further exploration for the use NLCs as a controlled delivery system for chemotherapeutic agents.