Conducting polymer hydrogels

Electroconductive cardiac patch based on bioactive PEDOT:PSS hydrogels

Engineering cardiac implants for treating myocardial infarction (MI) has advanced, but challenges persist in mimicking the structural properties and variability of cardiac tissues using traditional bioconstructs and conventional engineering methods. This study introduces a synthetic patch with a bioactive surface designed to swiftly restore functionality to the damaged myocardium. The patch combines a composite, soft, and conductive hydrogel-based on (3,4-ethylenedioxythiophene):polystyrene-sulfonate (PEDOT:PSS) and polyvinyl alcohol (PVA). This cardiac patch exhibits a reasonably high electrical conductivity (40 S/cm) and a stretchability up to 50% of its original length. Our findings reveal its resilience to 10% cyclic stretching at 1 Hz with no loss of conductivity over time. To mediate a strong cell-scaffold adhesion, we biofunctionalize the hydrogel with a N-cadherin mimic peptide, providing the cardiac patch with a bioactive surface. This modification promote increased adherence and proliferation of cardiac fibroblasts (CFbs) while effectively mitigating the formation of bacterial biofilm, particularly against Staphylococcus aureus, a common pathogen responsible for surgical site infections (SSIs). Our study demonstrates the successful development of a structurally validated cardiac patch possessing the desired mechanical, electrical, and biofunctional attributes for effective cardiac recovery. Consequently, this research holds significant promise in alleviating the burden imposed by myocardial infarctions.

Resilient and Tough Conductive Polymer Hydrogel for a Low-Hysteresis Strain Sensor

Conductive polymer hydrogels are vital in strain sensors, yet achieving high resilience and toughness is a challenge. This study employs a prestretch method to engineer a tough conductive polymer hydrogel with sufficient resilience. Initially, a blend film of polyvinylalcohol (PVA) and ethylene-vinyl alcohol copolymer (EVOH) is prepared through solution casting, followed by a swelling process to form a PVA-EVOH hydrogel. This hydrogel, with PVA crystallites as crosslinking points, exhibits high toughness. The hydrogel is then immersed in pyrrole and ferric chloride solutions for in-situ polymerization of polypyrrole (PPy), creating a conductive PPy/PVA-EVOH hydrogel. Finally, a 200% prestretch is applied, breaking short chains within the network, eliminating energy dissipation at low strains. This results in a hydrogel with a 100% elastic deformation range, while maintaining high fracture toughness (1700 J m-2 ). The prestretched PPy/PVA-EVOH hydrogel functions as a strain sensor with low hysteresis, providing consistent strain measurements during loading and unloading. This outperforms the non-prestretched sample, which shows inconsistent responses between stretching and releasing.

Advances in the Preparation of Tough Conductive Hydrogels for Flexible Sensors

The rapid development of tough conductive hydrogels has led to considerable progress in the fields of tissue engineering, soft robots, flexible electronics, etc. Compared to other kinds of traditional sensing materials, tough conductive hydrogels have advantages in flexibility, stretchability and biocompatibility due to their biological structures. Numerous hydrogel flexible sensors have been developed based on specific demands for practical applications. This review focuses on tough conductive hydrogels for flexible sensors. Representative tactics to construct tough hydrogels and strategies to fulfill conductivity, which are of significance to fabricating tough conductive hydrogels, are briefly reviewed. Then, diverse tough conductive hydrogels are presented and discussed. Additionally, recent advancements in flexible sensors assembled with different tough conductive hydrogels as well as various designed structures and their sensing performances are demonstrated in detail. Applications, including the wearable skins, bionic muscles and robotic systems of these hydrogel-based flexible sensors with resistive and capacitive modes are discussed. Some perspectives on tough conductive hydrogels for flexible sensors are also stated at the end. This review will provide a comprehensive understanding of tough conductive hydrogels and will offer clues to researchers who have interests in pursuing flexible sensors.

The design of highly conductive and stretchable polymer conductors with low-load nanoparticles

Highly conductive and stretchable polymer conductors fabricated from conductive fillers and stretchable polymers are urgently needed in flexible electronics, implants, soft robotics, etc. However, polymer conductors encounter the conductivity-stretchability dilemma, in which high-load fillers needed for high conductivity always result in the stiffness of materials. Herein, we propose a new design of highly conductive and stretchable polymer conductors with low-load nanoparticles (NPs). The design is achieved by the self-assembly of surface-modified NPs to efficiently form robust conductive pathways. We employ computer simulations to elucidate the self-assembly of the NPs in the polymer matrices under equilibrium and tensile states. The conductive pathways retain 100% percolation probability even though the loading of the NPs is lowered to ∼2% volume. When the tensile strain reaches 400%, the percolation probability of the ∼2% NP system is still greater than 25%. The theoretical prediction suggests a way for advancing flexible conductive materials.

A wearable sensor based on multifunctional conductive hydrogel for simultaneous accurate pH and tyrosine monitoring in sweat

Flexible and wearable sweat sensors have drawn extensive attention by virtue of their continuous and real-time monitoring of molecular level information. However, current sweat-based sensors still pose several challenges, such as low accuracy for analytes detection, susceptibility to microorganism and poor mechanical performance. Herein, we demonstrated a noninvasive wearable sweat sensing patch composed of an electrochemical sensing system, and a pilocarpine-based iontophoretic system to stimulate sweat secretion. The electrochemical sensor based on tannic acid-Ag-carbon nanotube-polyaniline (TA-Ag-CNT-PANI) composite hydrogel was designed for on-body detection of pH and tyrosine (Tyr), a disease marker associated with multiple disorders, such as tyrosinemia and bulimia nervosa. The wearable sweat sensor can not only monitor the pH and Tyr in sweat simultaneously, but also further calibrate Tyr detection results with the measured pH value, so as to eliminate the effect of Tyr response variance at different pH and enhance the accuracy of the sensor. Furthermore, the presence of tannic acid chelated-Ag nanoparticles (TA-Ag NPs) and carbon nanotubes (CNTs) significantly improved the conductivity and flexibility of the hydrogel and endowed the composite hydrogel with antibacterial capability. Of note, the constructed wearable sensor was capable of monitoring Tyr with enhanced accuracy in various sweats.

Hydrogels with electrically conductive nanomaterials for biomedical applications

Hydrogels, soft 3D materials of cross-linked hydrophilic polymer chains with a high water content, have found numerous applications in biomedicine because of their similarity to native tissue, biocompatibility and tuneable properties. In general, hydrogels are poor conductors of electric current, due to the insulating nature of commonly-used hydrophilic polymer chains. A number of biomedical applications require or benefit from an increased electrical conductivity. These include hydrogels used as scaffolds for tissue engineering of electroactive cells, as strain-sensitive sensors and as platforms for controlled drug delivery. The incorporation of conductive nanomaterials in hydrogels results in nanocomposite materials which combine electrical conductivity with the soft nature, flexibility and high water content of hydrogels. Here, we review the state of the art of such materials, describing the theories of current conduction in nanocomposite hydrogels, outlining their limitations and highlighting methods for improving their electrical conductivity.

Recent Advances and Progress of Conducting Polymer-Based Hydrogels in Strain Sensor Applications

Conducting polymer-based hydrogels (CPHs) are novel materials that take advantage of both conducting polymers and three-dimensional hydrogels, which endow them with great electrical properties and excellent mechanical features. Therefore, CPHs are considered as one of the most promising platforms for employing wearable and stretchable strain sensors in practical applications. Herein, we provide a critical review of distinct features and preparation technologies and the advancements in CPH-based strain sensors for human motion and health monitoring applications. The fundamentals, working mechanisms, and requirements for the design of CPH-based strain sensors with high performance are also summarized and discussed. Moreover, the recent progress and development strategies for the implementation of CPH-based strain sensors are pointed out and described. It has been surmised that electronic skin (e-skin) sensors are the upward tendency in the development of CPHs for wearable strain sensors and human health monitoring. This review will be important scientific evidence to formulate new approaches for the development of CPH-based strain sensors in the present and in the future.

Multitasking smart hydrogels based on the combination of alginate and poly(3,4-ethylenedioxythiophene) properties: A review

Poly(3,4-ethylenedioxythiophene) (PEDOT), a very stable and biocompatible conducting polymer, and alginate (Alg), a natural water-soluble polysaccharide mainly found in the cell wall of various species of brown algae, exhibit very different but at the same complementary properties. In the last few years, the remarkable capacity of Alg to form hydrogels and the electro-responsive properties of PEDOT have been combined to form not only layered composites (PEDOT-Alg) but also interpenetrated multi-responsive PEDOT/Alg hydrogels. These materials have been found to display outstanding properties, such as electrical conductivity, piezoelectricity, biocompatibility, self-healing and re-usability properties, pH and thermoelectric responsiveness, among others. Consequently, a wide number of applications are being proposed for PEDOT-Alg composites and, especially, PEDOT/Alg hydrogels, which should be considered as a new kind of hybrid material because of the very different chemical nature of the two polymeric components. This review summarizes the applications of PEDOT-Alg and PEDOT/Alg in tissue interfaces and regeneration, drug delivery, sensors, microfluidics, energy storage and evaporators for desalination. Special attention has been given to the discussion of multi-tasking applications, while the new challenges to be tackled based on aspects not yet considered in either of the two polymers have also been highlighted.

Electroconductive biomaterials for cardiac tissue engineering

Myocardial infarction (MI) is still the leading cause of mortality worldwide. The success of cell-based therapies and tissue engineering strategies for treatment of injured myocardium have been notably hindered due to the limitations associated with the selection of a proper cell source, lack of engraftment of engineered tissues and biomaterials with the host myocardium, limited vascularity, as well as immaturity of the injected cells. The first-generation approaches in cardiac tissue engineering (cTE) have mainly relied on the use of desired cells (e.g., stem cells) along with non-conductive natural or synthetic biomaterials for in vitro construction and maturation of functional cardiac tissues, followed by testing the efficacy of the engineered tissues in vivo. However, to better recapitulate the native characteristics and conductivity of the cardiac muscle, recent approaches have utilized electroconductive biomaterials or nanomaterial components within engineered cardiac tissues. This review article will cover the recent advancements in the use of electrically conductive biomaterials in cTE. The specific emphasis will be placed on the use of different types of nanomaterials such as gold nanoparticles (GNPs), silicon-derived nanomaterials, carbon-based nanomaterials (CBNs), as well as electroconductive polymers (ECPs) for engineering of functional and electrically conductive cardiac tissues. We will also cover the recent progress in the use of engineered electroconductive tissues for in vivo cardiac regeneration applications. We will discuss the opportunities and challenges of each approach and provide our perspectives on potential avenues for enhanced cTE. STATEMENT OF SIGNIFICANCE: Myocardial infarction (MI) is still the primary cause of death worldwide. Over the past decade, electroconductive biomaterials have increasingly been applied in the field of cardiac tissue engineering. This review article provides the readers with the leading advances in the in vitro applications of electroconductive biomaterials for cTE along with an in-depth discussion of injectable/transplantable electroconductive biomaterials and their delivery methods for in vivo MI treatment. The article also discusses the knowledge gaps in the field and offers possible novel avenues for improved cardiac tissue engineering.

Synthesis, classification and properties of hydrogels: their applications in drug delivery and agriculture

Absorbent polymers or hydrogel polymer materials have an enhanced water retention capacity and are widely used in agriculture and medicine. The controlled release of bioactive molecules (especially drug proteins) by hydrogels and the encapsulation of living cells are some of the active areas of drug discovery research. Hydrogel-based delivery systems may result in a therapeutically advantageous outcome for drug delivery. They can provide various sequential therapeutic agents including macromolecular drugs, small molecule drugs, and cells to control the release of molecules. Due to their controllable degradability, ability to protect unstable drugs from degradation and flexible physical properties, hydrogels can be used as a platform in which various chemical and physical interactions with encapsulated drugs for controlled release in the system can be studied. Practically, hydrogels that possess biodegradable properties have aroused greater interest in drug delivery systems. The original three-dimensional structure gets broken down into non-toxic substances, thus confirming the excellent biocompatibility of the gel. Chemical crosslinking is a resource-rich method for forming hydrogels with excellent mechanical strength. But in some cases the crosslinker used in the synthesis of the hydrogels may cause some toxicity. However, the physically cross-linked hydrogel preparative method is an alternative solution to overcome the toxicity of cross-linkers. Hydrogels that are responsive to stimuli formed from various natural and synthetic polymers can show significant changes in their properties under external stimuli such as temperature, pH, light, ion changes, and redox potential. Stimulus-responsive hydrogels have a wider range of applications in biomedicine including drug delivery, gene delivery and tissue regeneration. Stimulus-responsive hydrogels loaded with multiple drugs show controlled and sustained drug release and can act as drug carriers. By integrating stimulus-responsive hydrogels, such as those with improved thermal responsiveness, pH responsiveness and dual responsiveness, into textile materials, advanced functions can be imparted to the textile materials, thereby improving the moisture and water retention performance, environmental responsiveness, aesthetic appeal, display and comfort of textiles. This review explores the stimuli-responsive hydrogels in drug delivery systems and examines super adsorbent hydrogels and their application in the field of agriculture.

Poly(aspartic acid) Biohydrogel as the Base of a New Hybrid Conducting Material

In the present study, a composite made of conducting polymer, poly(3,4-ethylenedioxythiophene) (PEDOT), and a biodegradable hydrogel of poly(aspartic acid) (PASP) were electrochemically interpenetrated with poly(hydroxymethyl-3,4-ethylenedioxythiophene) (PHMeDOT) to prepare a new interpenetrated polymer network (IPN). Different cross-linker and PEDOT MPs contents, as well as different electropolymerization times, were studied to optimize the structural and electrochemical properties. The properties of the new material, being electrically conductive, biocompatible, bioactive, and biodegradable, make it suitable for possible uses in biomedical applications.

Towards conductive hydrogels in e-skins: a review on rational design and recent developments

Over the past decades, electronic skins (e-skins) have attracted significant attention owing to their feasibility of applications in health monitoring, motion detection, and entertainment. As a class of soft materials, conductive hydrogels feature biocompatibility, stretchability, adhesiveness, and self-healing properties, making them one of the most important candidates for high-performance e-skins. However, profound challenges remain for achieving the combination of superior mechanical strength and conductivity of conductive hydrogels simultaneously without sacrificing their multifunctionalities. Herein, a framework for rational designs to fabricate conductive hydrogels are proposed, including the fundamental strategies of copolymerization, doping, and self-assembly. In addition, we provide a comprehensive analysis of their merits and demerits when the conductive hydrogels are fabricated in different ways. Furthermore, the recent progress and future perspective for conductive hydrogels in terms of electronic skins are highlighted.

Conducting polymers: a comprehensive review on recent advances in synthesis, properties and applications

Conducting polymers are extensively studied due to their outstanding properties, including tunable electrical property, optical and high mechanical properties, easy synthesis and effortless fabrication and high environmental stability over conventional inorganic materials. Although conducting polymers have a lot of limitations in their pristine form, hybridization with other materials overcomes these limitations. The synergetic effects of conducting polymer composites give them wide applications in electrical, electronics and optoelectronic fields. An in-depth analysis of composites of conducting polymers with carbonaceous materials, metal oxides, transition metals and transition metal dichalcogenides etc. is used to study them effectively. Here in this review we seek to describe the transport models which help to explain the conduction mechanism, relevant synthesis approaches, and physical properties, including electrical, optical and mechanical properties. Recent developments in their applications in the fields of energy storage, photocatalysis, anti-corrosion coatings, biomedical applications and sensing applications are also explained. Structural properties play an important role in the performance of the composites.

Natural-based Hydrogels: A Journey from Simple to Smart Networks for Medical Examination

Natural hydrogels, due to their unique biological properties, have been used extensively for various medical and clinical examinations that are performed to investigate the signs of disease. Recently, complex-crosslinking strategies improved the mechanical properties and advanced approaches have resulted in the introduction of naturally derived hydrogels that exhibit high biocompatibility, with shape memory and self-healing characteristics. Moreover, the creation of self-assembled natural hydrogels under physiological conditions has provided the opportunity to engineer fine-tuning properties. To highlight recent studies of natural-based hydrogels and their applications for medical investigation, a critical review was undertaken using published papers from the Science Direct database. This review presents different natural-based hydrogels (natural, natural-synthetic hybrid and complex-crosslinked hydrogels), their historical evolution, and recent studies of medical examination applications. The application of natural-based hydrogels in the design and fabrication of biosensors, catheters and medical electrodes, detection of cancer, targeted delivery of imaging compounds (bioimaging) and fabrication of fluorescent bioprobes is summarised here. Without doubt, in future, more useful and practical concepts will be derived to identify natural-based hydrogels for a wide range of clinical examination applications.

Conductive Hydrogels-A Novel Material: Recent Advances and Future Perspectives

A conductive hydrogel is a kind of polymer material having substantial potential applications with various properties, including high toughness, self-recoverability, electrical conductivity, transparency, freezing resistance, stimuli responsiveness, stretchability, self-healing, and strain sensitivity. Herein, according to the current research status of conductive hydrogels, properties of conductive hydrogels, preparation methods of different conductive hydrogels, and their application in different fields, such as sensor and actuator fabrication, biomedicine, and soft electronics, are introduced. Furthermore, the development direction and application prospects of conductive hydrogels are proposed.

A review of advances in the preparation and application of polyaniline based thermoset blends and composites

For several decades, forming blend and composite of polyaniline (PANI) with insulating polymers has been a widely studied research area because of the potential applications of such blends, which have a unique combination of mechanical properties, the processability of conventional polymers and the electrical property of conducting polymers. The current review paper will emphasize PANI composites or blends with thermosetting polymer matrices. The enhanced electro-mechanical properties of the blends and composites depend on the uniform dispersion of the PANI particle in polymer matrix. Therefore, considerable studies have focused on improving the distribution of PANI particles within the thermoset matrices. In this review paper, all the parameters and conditions that influence the surface morphology and application of PANI thermoset blends and composites will be described systematically. Recent progress on PANI based thermoset system with multifunctional ternary composites research will be highlighted in this paper. Furthermore, encouraging applications of different PANI thermoset composites and blends are discussed, such as flame-retardant materials, lightning damage suppression, metal ion removal, anticorrosive coating, electromagnetic shielding, conductive adhesives, and sensing materials.

Electromagnetic radiation driving of volume changes in nanocomposites made of a thermosensitive hydrogel polymerized around conducting polymer nanoparticles

Polymeric nanocomposites were obtained by the formation of a thermosensitive hydrogel matrix around conducting polymer (CP) nanoparticles. The CP is able to absorb electromagnetic radiation which is converted into heat and induces the phase transition of the surrounding hydrogel. The method chosen to form the hydrogel is the free radical polymerization of a copolymer (N-isopropylacrylamide (NIPAM) and 2-acrylamide-2-methylpropano sulfonic acid (AMPS), PNIPAM-co-2% AMPS) in the presence of bisacrylamide as the crosslinker. The nanoparticles are polypyrrole nanospheres (PPy NP), polyaniline nanofibers (PANI NF), and polyaniline nanospheres (PANI NP). The morphology of the composites was studied using SEM microscopy and the percentage composition of each material was evaluated by thermogravimetric analysis (TGA). The swelling equilibrium capacity and rate are clearly affected by the nanoparticle shape and nature. However, the nanocomposites LCST are similar to that of the matrix. Upon RF irradiation, the three nanocomposites increase the temperature and reach the LCST after 320 seconds of irradiation (320 kJ). Upon MW application, the local temperature reaches the LCST after only 30 s (21 kJ), resulting in a MW more effective than RF to drive the transition. These results demonstrate that the proposed materials are useful as a remotely driven actuator.

A novel synthetic method of photothermally activated nanocomposites by in situ formation of hydrogel matrixes around dispersed conducting polymer nanoparticles is described.

Recent Advances in Conjugated Graft Copolymers: Approaches and Applications

The main goal of this mini review is to summarise the most recent progress in the field of conjugated graft copolymers featuring conjugation across the main chain, across side chains or across both. The main approaches to the synthesis of conjugated graft copolymers are highlighted, and the various trends in the development of new copolymer materials and the intended directions of their applications are explored.

Hydrogel bioelectronics

Hydrogels have emerged as a promising bioelectronic interfacing material. This review discusses the fundamentals and recent advances in hydrogel bioelectronics.

Functional Stimuli-Responsive Gels: Hydrogels and Microgels

One strategy that has gained much attention in the last decades is the understanding and further mimicking of structures and behaviours found in nature, as inspiration to develop materials with additional functionalities. This review presents recent advances in stimuli-responsive gels with emphasis on functional hydrogels and microgels. The first part of the review highlights the high impact of stimuli-responsive hydrogels in materials science. From macro to micro scale, the review also collects the most recent studies on the preparation of hybrid polymeric microgels composed of a nanoparticle (able to respond to external stimuli), encapsulated or grown into a stimuli-responsive matrix (microgel). This combination gave rise to interesting multi-responsive functional microgels and paved a new path for the preparation of multi-stimuli "smart" systems. Finally, special attention is focused on a new generation of functional stimuli-responsive polymer hydrogels able to self-shape (shape-memory) and/or self-repair. This last functionality could be considered as the closing loop for smart polymeric gels.

Polyaniline cryogels: Biocompatibility of novel conducting macroporous material

Polyaniline cryogel is a new unique form of polyaniline combining intrinsic electrical conductivity and the material properties of hydrogels. It is prepared by the polymerization of aniline in frozen poly(vinyl alcohol) solutions. The biocompatibility of macroporous polyaniline cryogel was demonstrated by testing its cytotoxicity on mouse embryonic fibroblasts and via the test of embryotoxicity based on the formation of beating foci within spontaneous differentiating embryonic stem cells. Good biocompatibility was related to low contents of low-molecular-weight impurities in polyaniline cryogel, which was confirmed by liquid chromatography. The adhesion and growth of embryonic stem cells, embryoid bodies, cardiomyocytes, and neural progenitors prove that polyaniline cryogel has the potential to be used as a carrier for cells in tissue engineering or bio-sensing. The surface energy as well as the elasticity and porosity of cryogel mimic tissue properties. Polyaniline cryogel can therefore be applied in bio-sensing or regenerative medicine in general, and mainly in the tissue engineering of electrically excitable tissues.

Conducting Polymer Iongels Based on PEDOT and Guar Gum

Conducting polymer hydrogels are attracting much interest in biomedical and energy-storage devices due to their unique electrochemical properties including their ability to conduct both electrons and ions. They suffer, however, from poor stability due to water evaporation, which causes the loss of mechanical and ion conduction properties. Here we show for the first time a conducting polymer gel where the continuous phase is a nonvolatile ionic liquid. The novel conducting iongel is formed by a natural polysaccharide (guar gum), a conductive polymer poly(3,4-ethylenedioxythiophene) (PEDOT), and an ionic liquid (IL) 1-butyl-3-methylimidazolium chloride (BMIMCl). First, an aqueous dispersion of PEDOT:guar gum is synthesized by an oxidative polymerization process of EDOT in the presence of the polysaccharide as stabilizer. The resulting PEDOT:guar gum was isolated as a powder by removing the water via freeze-drying process. In the final step, conducting iongels were prepared by the PEDOT:guar gum mixed with the ionic liquid by a heating-cooling process. The rheological properties show that the material exhibits gel type behavior between 20 and 80 °C. Interestingly, the conducting polymer iongel presents redox properties as well as high ionic conductivities (10^-2 S cm^-1). This material presents a unique combination of properties by mixing the electronic conductivity of PEDOT, the ionic conductivity and negligible vapor pressure of the ionic liquid and the support and flexibility given by guar gum.