A mini review: Functional nanostructuring with perfectly-ordered anodic aluminum oxide template for energy conversion and storage

Annealing Temperature-Dependent Surface-Enhanced Raman spectroscopy on MoS2-Covered silver nanoparticle array

Surface-enhanced Raman spectroscopy (SERS) is an ultra-sensitive analytical tool that can effectively detect and identify molecules by their unique vibrational fingerprints. Development of SERS substrates with good stability, high sensitivity and reproducibility is still a big challenge in practical applications. Recently, 2D materials/metallic hybrid SERS substrates provide a new prospect to improve the SERS performance. Here, we obtain a monolayer MoS₂ covered silver nanoparticle (AgNP) array as a high-performance SERS substrate. Annealing temperature-dependent SERS signals on the hybrid substrate have been explored. The optimum SERS performance was obtained at 290 ℃ (the detection limit of 10^-13 M for Rhodamine 6G and the corresponding SERS enhancement factor of 8.3 × 10⁹), which is attributed to the better contact between AgNPs and MoS₂ and the uniform AgNPs with appropriate particle sizes. The prepared MoS₂/AgNPs hybrid substrates also have been utilized to detect various molecules, which demonstrates a great potential for applications in food safety and biochemical environmental detection.

Anodic Alumina Membranes: From Electrochemical Growth to Use as Template for Fabrication of Nanostructured Electrodes

The great success of anodic alumina membranes is due to their morphological features coupled to both thermal and chemical stability. The electrochemical fabrication allows accurate control of the porous structure: in fact, the membrane morphological characteristics (pore length, pore diameter and cell density) can be controlled by adjusting the anodizing parameters (bath, temperature, voltage and time). This article deals with both the fabrication and use of anodic alumina membranes. In particular, we will show the specific role of the addition of aluminum ions to phosphoric acid-based anodizing solution in modifying the morphology of anodic alumina membranes. Anodic alumina membranes were obtained at −1 °C in aqueous solutions of 0.4 M H3PO4 added with different amounts of Al(OH)3. For sake of completeness, the formation of PAA in pure 0.4 M H3PO4 in otherwise identical conditions was also investigated. We found that the presence of Al(OH)3 in solution highly affects the morphology of the porous layer. In particular, at high Al(OH)3 concentration (close to saturation) more compact porous layers were formed with narrow pores separated by thick oxide. The increase in the electric charge from 20 to 160 C cm−2 also contributes to modifying the morphology of porous oxide. The obtained anodic alumina membranes were used as a template to fabricate a regular array of PdCo alloy nanowires that is a valid alternative to Pt for hydrogen evolution reaction. The PdCo alloy was obtained by electrodeposition and we found that the composition of the nanowires depends on the concentration of two metals in the deposition solution.

Perspective on Micro-Supercapacitors

The rapid development of portable, wearable, and implantable electronic devices greatly stimulated the urgent demand for modern society for multifunctional and miniaturized electrochemical energy storage devices and their integrated microsystems. This article reviews material design and manufacturing technology in different micro-supercapacitors (MSCs) along with devices integrate to achieve the targets of their various applications in recent years. Finally, We also critically prospect the future development directions and challenges of MSCs.

Photocatalytic activation of TiO2-functionalized anodic aluminium oxide for electroless copper deposition

TiO2/AAO allows for a spatial photodeposition of copper seeds under UV illumination through a photomask, which along with its improved chemical stability allows for the additive deposition of conductive Cu patterns in an alkaline electroless Cu bath.

Effects of Anodic Aluminum Oxide Substrate Pore Geometry on the Gas-Phase Photocatalytic Activity of ZnO/Al2O3 Composites Prepared by Atomic Layer Deposition

We report on the photocatalytic activity of ZnO layers deposited by atomic layer deposition on a porous anodic aluminum oxide substrate with hexagonal pore symmetry and varied pore dimensions. ZnO/Al2O3 composites were prepared with pore diameters in the range 93–134 nm and interpore distance in the range 185–286 nm, and their photocatalytic activity was measured for gas-phase photocatalytic oxidation of acetaldehyde at varying UV illumination intensities (0.08–3.94 mW cm−2). The results show that substrates with narrower pore diameters (<115 nm, in the case of this study) have a detrimental effect on the photocatalyst performance, despite their higher effective surface. The results are explained on the basis of limited mass transfer inside the porous structure and can be used as a guideline in the purposeful design of photocatalysts with a nanoporous or nanotubular structure.

The Use of Anodic Oxides in Practical and Sustainable Devices for Energy Conversion and Storage

This review addresses the main contributions of anodic oxide films synthesized and designed to overcome the current limitations of practical applications in energy conversion and storage devices. We present some strategies adopted to improve the efficiency, stability, and overall performance of these sustainable technologies operating via photo, photoelectrochemical, and electrochemical processes. The facile and scalable synthesis with strict control of the properties combined with the low-cost, high surface area, chemical stability, and unidirectional orientation of these nanostructures make the anodized oxides attractive for these applications. Assuming different functionalities, TiO2-NT is the widely explored anodic oxide in dye-sensitized solar cells, PEC water-splitting systems, fuel cells, supercapacitors, and batteries. However, other nanostructured anodic films based on WO3, CuxO, ZnO, NiO, SnO, Fe2O3, ZrO2, Nb2O5, and Ta2O5 are also explored and act as the respective active layers in several devices. The use of AAO as a structural material to guide the synthesis is also reported. Although in the development stage, the proof-of-concept of these devices demonstrates the feasibility of using the anodic oxide as a component and opens up new perspectives for the industrial and commercial utilization of these technologies.

A CO2-gated anodic aluminum oxide based nanocomposite membrane for de-emulsification

A carbon-dioxide-responsive organic-inorganic nanocomposite membrane based on a through-hole anodic aluminum oxide (AAO) template was constructed. The composite was prepared via a surface-initiated reversible addition-fragmentation chain-transfer (SI-RAFT) polymerization strategy to achieve the grafting of poly(methyl methacrylate-co-2-(diethylamino)ethyl methacrylate) brushes on the AAO membrane. The grafted polymer chain length could be controlled based on the feed ratio between the free chain transfer agent (CTA) and reactive monomer, e.g., methyl methacrylate and 2-(diethylamino)ethyl methacrylate, resulting in a membrane that features adjustable water permeability. Importantly, the membrane pore size and surface wettability could be switched from hydrophobic to hydrophilic upon the introduction of carbon dioxide and nitrogen gases. This allowed for the nanocomposite membrane to be utilized for controlled water flux and oil/water emulsion separation. The simple fabrication methodology as well as sustainable gaseous stimulus will be useful for the construction of future smart membranes.

Localized and Programmable Chemical Vapor Deposition Using an Electrically Charged and Guided Molecular Flux

Chemical vapor deposition is a widely used material deposition technique. It commonly provides a uniform material flux to the substrate to cause uniform thin film growth. However, the ability to precisely adjust the local deposition rate would be highly preferable. This communication reports on a chemical vapor deposition method performed in a localized and programmable fashion by introducing an electrically charged and guided molecular flux. This allows for local adjustments of the deposition rate and three-dimensional shape by controlling the electric fields. Specifically, the precursor molecules are charged and then guided by arrays of electrodynamic funnels, which are created by a patterned dielectric layer, to predetermined deposition locations with a minimal spot size of 250 nm. Furthermore, nearest neighbor coupling is reported as a shaping method to cause the deposition of three-dimensional nanostructures. Additionally, the integration of individually addressable domain electrodes offers programmable charge dissipation to achieve an ON/OFF control. The described method is applicable to a wide variety of materials and precursors. Here, the localized and programmable deposition of three-dimensional copper oxide, chromium oxide, zinc oxide, and carbon nanowires is demonstrated.

The toolbox of porous anodic aluminum oxide–based nanocomposites: from preparation to application

Anodic aluminum oxide (AAO) templates have been intensively investigated during the past decades and have meanwhile been widely applied through both sacrificial and non-sacrificial pathways. In numerous non-sacrificial applications, the AAO membrane is maintained as part of the obtained composite materials; hence, the template structure and topography determine to a great extent the potential applications. Through-hole isotropic AAO features nanochannels that promote transfer of matter, while anisotropic AAO with barrier layer exhibits nanocavities suitable as independent and homogenous containers. By combining the two kinds of AAO membranes with diverse organic and inorganic materials through physical interactions or chemical bonds, AAO composites are designed and applied in versatile fields such as catalysis, drug release platform, separation membrane, optical appliances, sensors, cell culture, energy, and electronic devices. Therefore, within this review, a perspective on exhilarating prospect for complementary advancement on AAO composites both in preparation and application is provided.

Graphitic Nanocup Architectures for Advanced Nanotechnology Applications

The synthesis of controllable hollow graphitic architectures can engender revolutionary changes in nanotechnology. Here, we present the synthesis, processing, and possible applications of low aspect ratio hollow graphitic nanoscale architectures that can be precisely engineered into morphologies of (1) continuous carbon nanocups, (2) branched carbon nanocups, and (3) carbon nanotubes-carbon nanocups hybrid films. These complex graphitic nanocup-architectures could be fabricated by using a highly designed short anodized alumina oxide nanochannels, followed by a thermal chemical vapor deposition of carbon. The highly porous film of nanocups is mechanically flexible, highly conductive, and optically transparent, making the film attractive for various applications such as multifunctional and high-performance electrodes for energy storage devices, nanoscale containers for nanogram quantities of materials, and nanometrology.

Graphitic carbon nitride nanotubes: a new material for emerging applications

We provide a critical review of the current state of the synthesis and applications of nano- and micro-tubes of layered graphitic carbon nitride. This emerging material has a huge potential for light-harvesting applications, including light sensing, artificial photosynthesis, selective photocatalysis, hydrogen storage, light-induced motion, membrane technologies, and can become a major competitor for such established materials as carbon and titania dioxide nanotubes. Graphitic carbon nitride tubes (GCNTs) combine visible-light sensitivity, high charge carrier mobility, and exceptional chemical/photochemical stability, imparting this material with unrivaled photocatalytic activities in photosynthetic processes, such as water splitting and carbon dioxide reduction. The unique geometric GCNT structure and versatility of possible chemical modifications allow new photocatalytic applications of GCNTs to be envisaged including selective photocatalysts of multi-electron processes as well as light-induced and light-directed motion of GCNT-based microswimmers. Closely-packed arrays of aligned GCNTs show great promise as multifunctional membrane materials for the light energy conversion and storage, light-driven pumping of liquids, selective adsorption, and electrochemical applications. These emerging applications require synthetic routes to GCNTs with highly controlled morphological parameters and composition to be available. We recognize three major strategies for the GCNT synthesis including templating, supramolecular assembling of precursors, and scrolling of nano-/microsheets, and outline promising routes for further progress of these approaches in the light of the most important emerging applications of GCNTs.

Unraveling Mass and Electron Transfer Kinetics at Silica Nanochannel Membrane Modified Electrodes by Scanning Electrochemical Microscopy

An in-depth understanding of kinetic processes convoluting mass and charge transfer at nanoporous membrane modified electrodes is crucial for developing high-performance electrochemical sensors. In this work, we propose a theoretical model to unravel mass (k_m) and electron transfer rate (k_f) from the apparent electrochemical rate constant (k_app) at silica nanoporous membrane (SNM) modified indium tin oxide (ITO) electrodes (designated as SNM/ITO for simplicity). Using scanning electrochemical microscopy (SECM), the k_app of charged redox species was first determined at the SNM/ITO in the absence and presence of surfactant micelles inside SNM. On the basis of the theory, in the presence of micelles inside SNM, k_m equals zero for all charged probes (Ru(NH₃)₆²⁺, Ru(CN)₆^3-, and FcMeOH⁺), thus the SNM behaves as an insulating barrier and the overall electrode reactivity is dominated by the permeability of SNM. After excluding micelles from SNM, the k_m of Ru(CN)₆^3-/4- is strongly dependent on the KCl concentration in the solution, decreasing from 0.23/0.15 mm s^-1 to almost zero upon decreasing the KCl concentration from 1.0 to 0.01 M. In contrast, k_m increases from 1.33 to 2.4 mm s^-1 for Ru(NH₃)₆²⁺ and from 0.18 to 0.33 mm s^-1 for FcMeOH⁺, which are comparable to the electron transfer rate at the underlying ITO electrode surface (0.8 and 0.35 mm s^-1). In these cases, both mass and electron transfer processes are important in determining the overall redox activity of SNM/ITO electrodes. The methodology reported in this work can provide a quantitative way of unraveling these processes and their respective contributions.

Templated nanoreactor arrays for nanoscale-tunable liquid-phase catalysis

We demonstrate templated synthesis of arrayed metal oxide-based nanoreactors as candidate platforms for liquid-phase catalysis. A case study of zinc oxide nanotubes revealed high-level catalytic reactivity and nanoscale-tunable kinetics, either for Knoevenagel condensation or radical-mediated oxidation, owing to the ordered nanostructures and optimized surface.