Effect of Attapulgite Pore Size Distribution on Soybean Oil Bleaching

Electrostatic field as an emergent technology in refining crude oils: a review

Vegetable oils and fatty acid esters (FAEs) are commonly used in various industrial and commercial applications. However, the presence of contaminants in these oils can severely affect their functionality and suitability. Conventional refining techniques for vegetable oils typically involve degumming, neutralization, bleaching and deodorization. Meanwhile, refining of FAEs often utilize wet or dry washing processes. These are often resource-intensive, producing substantial waste products, causing neutral oil loss, and can also result in the loss of micronutrients. To address these challenges, researchers have explored the use of nano-adsorbents and electrostatic field (E-field) technologies as alternatives in purifying industrial dielectric oils by removing polar particles and contaminants. Nano-adsorbents demonstrated increased efficiency in removing polar contamination while minimizing neutral oil loss. However, removal of these spent adsorbents can be challenging due to their nano-size, and physicochemical properties. The use of these materials combined with E-field technologies offers a novel and sustainable solution for removing spent nano-adsorbents and contaminants. This review provides an overview of current traditional and novel refining technologies for vegetable oils and FAEs, including their associated limitations. Compared to conventional methods, E-field treatment offers several advantages, making it an attractive alternative to conventional approaches in food processing and oil refining.

Evaluation of Dietary Palygorskite Supplementation on Growth Performance, Mineral Accumulations, Antioxidant Capacities, and Meat Quality of Broilers Fed Lead-Contaminated Diet

The objective of this study was to evaluate influence of dietary palygorskite (Pal) supplementation on growth performance, mineral accumulations in the tissues (livers, kidneys, and muscles), antioxidant capacities, and meat quality of broilers fed lead (Pb)-contaminated diet. One-hundred forty-four male broiler chicks were randomly divided into three treatment groups, receiving a corn-soybean meal basal diet (the control group), the basal diet contaminated with 10 mg/kg Pb (the Pb group), and the basal diet with 10-g/kg Pal supplementation and 10-mg/kg Pb contamination (the Pal/Pb group) from 1 to 42 days of age, respectively. Treatments did not affect growth performance of broilers in the 42-day study (P > 0.05). Compared with the control group, Pb contamination increased Pb accumulation in the livers, kidneys, and muscles (P < 0.05); elevated malondialdehyde accumulation in the livers, kidneys, and breast muscles; glutathione peroxidase activity in the livers and superoxide dismutase activity in the kidneys (P < 0.05); exacerbated drip loss in the pectoralis muscles (P < 0.05); and reduced glutathione peroxidase activity in the pectoralis muscles (P < 0.05) of broilers at 42 days of age. The values of these parameters were reversed in the Pal/Pb group to levels comparable with those in the control group (P < 0.05). Additionally, Pal supplementation reduced redness value in the pectoralis muscles (P < 0.05), and decreased Cu concentration in the pectoralis muscles and livers at 42 days of age as well as its accumulation in the kidneys at both 21 and 42 days of age compared with the other two groups (P < 0.05). The results suggested that dietary Pal supplementation would decrease Pb residue in the tissues, alleviate oxidative stress, and affect meat quality of broilers exposed to Pb.

Carbon/Attapulgite Composites as Recycled Palm Oil-Decoloring and Dye Adsorbents

Activated clay minerals have been widely used in the edible oil refining industry for decolorization of crude oil by adsorption, and so far many methods have been used to improve their decolorization efficiency. Herein, we successfully prepared a series of carbon/attapulgite (C/APT) composite adsorbents by a one-step in-situ carbonization process with natural starch (St) as the carbon source. It has been revealed that the adsorbent had better decolorization efficiency for crude palm oil than acid-activated APT. However, more than a million tons of decolorized waste is produced every year in the oil-refining industry, which was often treated as solid waste and has not yet been reutilized effectively. In order to explore a viable method to recycle and reuse the decolorant, the waste decolorant was further prepared into new C/APT adsorbents for the removal of dyes from wastewater, and then the dyes adsorbed on the adsorbent were used as the carbon sources to produce new C/APT adsorbents by a cyclic carbonization process. The results showed that the adsorbents prepared from the decolorized waste could remove more than 99.5% of the methylene blue (MB), methyl violet (MV), and malachite green (MG) dyes from the simulated wastewater with the dye concentration of 200 mg/L, and the C/APT-Re adsorbent consecutively regenerated five times using the adsorbed dyes as a carbon source still exhibit good adsorption efficiency for dyes. As a whole, this process opens a new avenue to develop efficient decolorants of palm oil and achieves recyclable utilization of decolored waste.

Effects of Palygorskite Inclusion on the Growth Performance, Meat Quality, Antioxidant Ability, and Mineral Element Content of Broilers

The present study was conducted to investigate different levels of palygorskite supplementation on the growth performance, meat quality, muscular oxidative status, and mineral element accumulation of broilers. One hundred ninety-two 1-day-old Arbor Acres broiler chicks were allocated to four dietary treatments with six replicates of eight chicks per replicate. Birds in the four treatments were given a basal diet supplemented with 0, 5, 10 and 20 g/kg palygorskite for 42 days, respectively. Compared with the control group, neither 5 g/kg nor 10 g/kg palygorskite inclusion affected growth performance of broilers during the 42-day study (P > 0.05). However, the highest level of palygorskite supplementation at 20 g/kg increased feed/gain ratio (F/G) of broilers (P < 0.001). Yellowness (P < 0.001) and redness (P = 0.003) of breast muscle and yellowness of leg muscle (P = 0.001) were decreased by palygorskite supplementation at the levels of 10 g/kg and especially 20 g/kg. In addition, redness of leg muscle was also reduced by the inclusion of 20 g/kg palygorskite (P = 0.009). In contrast, malonaldehyde (MDA) accumulation in the breast muscle was significantly increased by 20 g/kg palygorskite supplementation (P < 0.001). Supplementation of palygorskite at either 10 or 20 g/kg significantly decreased lead (Pb) accumulation in the breast (P = 0.001) or thigh (P = 0.045) and copper (Cu) accumulation in the breast (P = 0.022). In conclusion, growth performance, meat color, and antioxidant capacity of meat would reduce with the increasing level of palygorskite supplementation, whereas a higher level of palygorskite (10 or 20 g/kg) can alter mineral element accumulations in muscles as evidenced by reduced muscular Cu and Pb contents.

Maximum Bleaching of Vegetable Oils by Acid-Activated Bentonite: Influence of Nanopore Radius

The optimum conditions necessary for preparing a bleaching earth (BE) with maximum bleaching power (BP) towards soybean oil (SO) and cottonseed oil (CSO) were investigated. BEs were obtained by H2SO4 activation of a white calcium bentonite (CaB) sample from the Kütahya region of Turkey. After drying for 4 h at 105 °C, the CaB samples were activated by heating their acidic aqueous suspensions for 6 h at 97 °C, the acid content of the dry bentonite/acid mixture being varied in the 0–70% mass range. The respective specific surface area (S) and specific nanopore volume (V) of the BEs were determined from nitrogen adsorption/desorption data obtained at −196 °C. For natural CaB, the values of S and V were 44 m2/g and 0.11 cm3/g, respectively. These values attained a maximum of 135 m2/g and 0.30 cm3/g for the BE sample prepared employing 40% H2SO4 for acid activation. Interestingly, the maximum BP was not associated with the maximum S and V values. The optimum values for the percentage H2SO4, S and V for attaining the maximum BP were 20%, 100 m2/g and 0.17 cm3/g, respectively. The mean nanopore radius (r) of each BE was calculated using the corresponding S and V values. Nanopores with a mean radius in the range 3.5–5.5 nm, which was close to the diameter of the coloured pigment, were found to be mostly responsible for the BP towards SO and CSO. The results obtained in the present study indicate that the value of r was more effective than the S and V values of BEs in the bleaching of vegetable oils. Adsorption of a pigment onto a BE was found to depend not only on the physicochemical interaction between the pigment molecule and the BE surface, but also on the mean nanopore size.

Photo degradation of methyl orange by attapulgite-SnO2-TiO2 nanocomposites

Photocatalytic removal of methyl orange under ultraviolet radiation has been studied using attapulgite (ATT) composites, which were synthesized by depositing SnO(2)-TiO(2) hybrid oxides on the surface of ATT to form a composite photocatalyst (denoted ATT-SnO(2)-TiO(2)) using an in situ sol-gel technique. Results showed that SnO(2)-TiO(2) nanocomposite particles with average size of about 10nm were loaded successfully on to the surface of ATT fibers and were widely dispersed. Correspondingly, the photocatalytic activity of ATT was improved significantly by loading SnO(2)-TiO(2). The photoactivity of the composite photocatalyst decreased in the sequence ATT-SnO(2)-TiO(2)>ATT-SnO(2)>ATT-TiO(2)>ATT. In order to achieve the best photocatalyst, the molar ratio of SnO(2) and TiO(2) in the ATT-SnO(2)-TiO(2) composites was adjusted to give a series with proportions r=n(Ti)/(n(Ti)+n(Sn))=0.0, 0.25, 0.33, 0.50, 0.67, 0.75, 0.80, 0.82, 0.86, 1.0. Results indicated that the proportion of SnO(2) and TiO(2) had a critical effect on the photocatalytic activity, which increased as the content of TiO(2) increased to r<or=0.82 and decreased when r>0.82. The highest degradation rate of methyl orange was 99% within 30 min obtained by using ATT-SnO(2)-TiO(2) with r=0.82. The repeated use of the composite photocatalyst was also confirmed.

Kinetics and thermodynamics of beta-carotene and chlorophyll adsorption onto acid-activated bentonite from Xinjiang in xylene solution

The kinetics and thermodynamics of beta-carotene and chlorophyll adsorption from xylene solution onto acid-activated bentonite (AAB) within the temperature range 65-95 degrees C were investigated. Adsorption of beta-carotene was described well with the Langmuir isotherm, whereas chlorophyll adsorption was determined well with the Freundlich isotherm, and the experimental data on chlorophyll adsorption were also fitted by the Langmuir isotherm to a certain extent, as reflected by correlation coefficients (R(2)) over 0.9865. In addition, the adsorption of beta-carotene and chlorophyll onto AAB are favorable. The pseudo-second-order model was found to explain the kinetics of adsorption of both pigments more effectively. Increase of temperature enhanced the adsorption rate and equilibrium adsorption capacity of beta-carotene and chlorophyll on AAB. The activation energy for the sorption of beta-carotene and chlorophyll on AAB was 19.808 kJ/mol and 16.475 kJ/mol, respectively. The thermodynamic parameters DeltaH(theta), DeltaS(theta) and DeltaG(theta), computed from K(F) of the adsorption isotherm constant, were 21.766 kJ/mol, 92.244 J/ K mol and -9.554 kJ/mol respectively for the adsorption of beta-carotene on AAB at 65 degrees C, and for adsorption of chlorophyll on AAB at 65 degrees C were 31.051 kJ/mol, 93.549 J/K mol and -0.729 kJ/mol, respectively. The adsorption of beta-carotene and chlorophyll in xylene solution on AAB was a spontaneous and endothermic process with increasing in the randomness at the solid-solution interface.