Frank Stinchfield Award: Identification of the At-risk Genotype for Development of Pseudotumors Around Metal-on-metal THAs

Understanding immune-mediated cobalt/chromium allergy to orthopaedic implants: a meta-synthetic review

BACKGROUND

The frequency of primary joint replacement surgery continues to increase worldwide. While largely considered biologically inert entities, an increasing body of evidence continues to validate a not insignificant incidence of allergic reactions to such implants. Little previous work has explored genuinely immune-mediated reactivity in this context. In the absence of a contemporary published summary on the topic, this paper explored the current state of understanding of cobalt/chromium allergy and proposes a patient management algorithm whereby such immune reactions are clinically suggested.

METHODS

A structured, systematic literature review was performed by following PRISMA search principles to provide an updated review of this area.

RESULTS

Thirty-six topic-related articles were identified, the majority reflecting lower tiers of scientific evidence with a lack of homogeneous quantitative data to facilitate valid cohort comparisons. Largely, the available literature represented small case series' or expert opinions.

CONCLUSIONS

Despite increasing clinical awareness and acknowledgement of true allergy to joint replacement components, this review highlighted that the evidence base underpinning the diagnosis and management of such patients is limited. Both patient-reported metal allergy or skin patch testing are grossly unreliable methods and show almost no correlation with true immune reactivity. Recent studies suggested a potential role for patient-specific in vitro cellular activation testing and/or targeted genetic testing when cobalt/chromium allergy is clinically suspected. However, while likely representing the contemporary "best available" approaches both can be costly undertakings, are not yet universally available, and still require broader validation in non-research settings before wider uptake can be championed.

International primary hip arthroplasty registry review: findings from current reports

We present key information from international registries in relation to primary total hip arthroplasty. The specific questions of interest include which bearings are superior in total hip arthroplasty (THA), which fixation types are optimal, do any specific implants perform better than others, and what is the latest update in the hip fracture setting? This is a comprehensive review of the major English-speaking hip arthroplasty registries across the globe. Key trends and developments in implant performance are identified and presented in the current article. Key points from review of all registries confirm that ceramic-on-polyethylene and metal-on-polyethylene continue to be the commonest bearings. The use of cemented femoral stems is increasing across most regions. Hybrid fixation is now the commonest fixation method in the UK for the first time in registry history. Uncemented femoral stems have a higher early revision rate for periprosthetic fracture than cemented stems across most regions. Dual mobility (DM) bearings are increasing in use and show higher early revision rates than unipolar bearings-they tend to be used for more complex indications (fracture/tumor/revision) and show similar revision rates to unipolar bearings when used exclusively in primary elective THA for osteoarthritis. We present current trends in THA based on current registry data from across the globe. Clinical signals of concern are emerging for THA uncemented femoral stem fixation and DM bearings in specific clinical contexts. These signals should be monitored across the literature in order to reduce the overall revision burden.

Identification of protective and 'at risk' HLA genotypes for the development of pseudotumours around metal-on-metal hip resurfacings

Hip resurfacing remains a potentially valuable surgical procedure for appropriately-selected patients with optimised implant choices. However, concern regarding high early failure rates continues to undermine confidence in use. A large contributor to failure is adverse local tissue reactions around metal-on-metal (MoM) bearing surfaces. Such phenomena have been well-explored around MoM total hip arthroplasties, but comparable data in equivalent hip resurfacing procedures is lacking. In order to define genetic predisposition, we performed a case-control study investigating the role of human leucocyte antigen (HLA) genotype in the development of pseudotumours around MoM hip resurfacings. A matched case-control study was performed using the prospectively-collected database at the host institution. In all, 16 MoM hip resurfacing 'cases' were identified as having symptomatic periprosthetic pseudotumours on preoperative metal artefact reduction sequence (MARS) MRI, and were subsequently histologically confirmed as high-grade aseptic lymphocyte-dominated vasculitis-associated lesions (ALVALs) at revision surgery. 'Controls' were matched by implant type in the absence of evidence of pseudotumour. Blood samples from all cases and controls were collected prospectively for high resolution genetic a nalysis targeting 11 separate HLA loci. Statistical significance was set at 0.10 a priori to determine the association between HLA genotype and pseudotumour formation, given the small sample size. Using a previously-reported ALVAL classification, the majority of pseudotumour-positive caseswere found to have intermediate-grade group 2 (n = 10; 63%) or group 3 (n = 4; 25%) histological findings. Two further patients (13%) had high-grade group 4 lesions. HLA-DQB1*05:03:01 (p = 0.0676) and HLA-DRB1*14:54:01 (p = 0.0676) alleles were significantly associated with a higher risk of pseudotumour formation, while HLA-DQA1*03:01:01 (p = 0.0240), HLA-DRB1*04:04:01 (p = 0.0453), HLA-C*01:02:01 (p = 0.0453), and HLA-B*27:05:02 (p = 0.0855) were noted to confer risk reduction. These findings confirm the association between specific HLA genotypes and the risk of pseudotumour development around MoM hip resurfacings. Specifically, the two 'at risk' alleles (DQB1*05:03:01 and DRB1*14:54:01) may hold clinical value in preoperative screening and prospective surgical decision-making.

Application of 3D-printed prosthesis in revision surgery with large inflammatory pseudotumour and extensive bone defect: A case report

BACKGROUND

Hip revision surgery is the final treatment option for the failure of artificial hip joints, but it is more difficult than the initial operation. For patients with hip joint loosening around the prosthesis combined with large inflammatory pseudotumours and large segment bone defects, hip revision is even more difficult, and clinical reports are rare.

CASE SUMMARY

Male, 59 years old. The patient underwent left hip replacement 35 years ago and was now admitted to hospital due to massive masses in the left thigh, shortening of the left lower extremity, and pain and lameness of the left hip joint. X-ray, computed tomography and magnetic resonance imaging revealed prosthesis loosening, left acetabular bone defect (Parprosky IIIB type), and a bone defect of the left proximal femur (Parprosky IIIA type). Inflammatory pseudotumours were seen in the left hip and left thigh. Hip revision surgery was performed using a 3D-printed custom acetabular prosthesis was used for hip revision surgery, which was produced by Arcam Electron Beam Melting system with Electron Beam Melting technology. The operation was successful, and the patient was followed up regularly after the operation. The custom-made acetabular prosthesis was well matched, the inflammatory pseudotumour was completely removed, the postoperative hip prosthesis was stable, and the old greater trochanter fracture was well reduced and fixed. The patient was partially weight-bearing with crutches 3 mo after the operation and walked with full weight-bearing after 6 mo. The hip prosthesis was stable, and there was no recurrence of inflammatory pseudotumours at the last follow-up. The Visual Analogue Scale was 3, and the Harris hip score was 90.

CONCLUSION

The use of 3D-printed personalized custom prostheses for complex hip revision surgery has satisfactory surgical results and has great clinical application value.

The influence of HLA genotype on the development of metal hypersensitivity following joint replacement

Background

Over five million joint replacements are performed across the world each year. Cobalt chrome (CoCr) components are used in most of these procedures. Some patients develop delayed-type hypersensitivity (DTH) responses to CoCr implants, resulting in tissue damage and revision surgery. DTH is unpredictable and genetic links have yet to be definitively established.

Methods

At a single site, we carried out an initial investigation to identify HLA alleles associated with development of DTH following metal-on-metal hip arthroplasty. We then recruited patients from other centres to train and validate an algorithm incorporating patient age, gender, HLA genotype, and blood metal concentrations to predict the development of DTH. Accuracy of the modelling was assessed using performance metrics including time-dependent receiver operator curves.

Results

Using next-generation sequencing, here we determine the HLA genotypes of 606 patients. 176 of these patients had experienced failure of their prostheses; the remaining 430 remain asymptomatic at a mean follow up of twelve years. We demonstrate that the development of DTH is associated with patient age, gender, the magnitude of metal exposure, and the presence of certain HLA class II alleles. We show that the predictive algorithm developed from this investigation performs to an accuracy suitable for clinical use, with weighted mean survival probability errors of 1.8% and 3.1% for pre-operative and post-operative models respectively.

Conclusions

The development of DTH following joint replacement appears to be determined by the interaction between implant wear and a patient's genotype. The algorithm described in this paper may improve implant selection and help direct patient surveillance following surgery. Further consideration should be given towards understanding patient-specific responses to different biomaterials.

Limited need for screening of metal-on-metal hip resurfacing patients beyond 10 years of follow-up

BACKGROUND

National and international guidelines lack consistency on how to screen metal-on-metal (MoM) hip arthroplasty patients for adverse reactions to metal debris (ARMD). Long-term outcomes of MoM hip arthroplasty are scarce, hindering further development of such guidelines. We present the clinical, radiological and ARMD status of 158 cases of hip resurfacing with >10 years follow-up.

METHODS

A prospective analysis of a cohort of 298 consecutive hip resurfacing procedures was performed at a single institution. All patients underwent MARS-MRI scanning for pseudotumour screening at least once, regardless of symptoms. Implant survival and reasons for revision were analysed for all patients. Clinical, radiological and MARS-MRI results were analysed for 158 unrevised procedures with >10 years follow-up.

RESULTS

The implant survival was 85.9% at 14.5 years (95% CI, 81.9-90.6) with revision for all causes as endpoint and 92.3% with MoM disease-related revisions excluded (95% CI, 88.2-95.0). Of the 158 cases with >10 years follow-up, 1 had elevated metal ion levels, 29 had a stable C1 pseudotumour and 6 a stable C2 pseudotumour. All pseudotumours were observed within 3 years after initiating our intensified ARMD screening (2011), with no new pseudotumours observed after that period.

CONCLUSIONS

We suggest that follow-up of MoM hip resurfacing patients beyond 10 years after surgery can be done with large intervals (i.e. every 5 years), and only earlier if a patient becomes symptomatic.

Cobalt ions induce metabolic stress in synovial fibroblasts and secretion of cytokines/chemokines that may be diagnostic markers for adverse local tissue reactions to hip implants

Adverse local tissue reactions (ALTRs) are a prominent cause of hip implant failure. ALTRs are characterized by aseptic necrosis and leukocyte infiltration of synovial tissue. The prevalence of ALTRs in hips with failing metal implants, with highest rates occurring in patients with metal-on-metal articulations, suggests a role for CoCrMo corrosion in ALTR formation. Although hypersensitivity reactions are the most accepted etiology, the precise cellular mechanism driving ALTR pathogenesis remains enigmatic. Here we show that cobalt ions released by failing hip implants induce mitochondrial stress and cytokine secretion by synovial fibroblasts: the presumptive initiators of ALTR pathogenesis. We found that in-vitro treatment of synovial fibroblasts with cobalt, but not chromium, generated gene expression changes indicative of hypoxia and mitophagy responses also observed in ALTRs biopsies. Inflammatory factors secreted by cobalt-exposed synovial fibroblasts were among those most concentrated in ALTR synovial fluid. Furthermore, both conditioned media from cobalt-exposed synovial fibroblasts, and synovial fluid from ALTRs patients, elicit endothelial activation and monocyte migration. Finally, we identify the IL16/CTACK ratio in synovial fluid as a possible diagnostic marker of ALTRs. Our results provide evidence suggesting that metal ions induce cell stress in synovial fibroblasts that promote an inflammatory response consistent with initiating ALTR formation. STATEMENT OF SIGNIFICANCE: We demonstrate that the cytotoxic effects of cobalt ions on the synovial cells (fibroblast) is sufficient to trigger inflammation on hip joints with metal implants. Cobalt ions affect mitochondrial function, leading to the auto phagocytosis of mitochondria and trigger a hypoxic response. The cell's hypoxic response includes secretion of cytokines that are capable of trigger inflammation by activating blood vessels and enhancing leukocyte migration. Among the secreted cytokines is IL-16, which is highly concentrated in the synovial fluid of the patients with adverse local tissue reactions and could be use as diagnostic marker. In conclusion we define the cells of the hip joint as key players in triggering the adverse reactions to hip implants and providing biomarkers for early diagnosis of adverse reactions to hip implants.

Impact of perivascular lymphocytic infiltration in aseptic total knee revision

AIMS

A limited number of investigations with conflicting results have described perivascular lymphocytic infiltration (PVLI) in the setting of total knee arthroplasty (TKA). The purpose of this study was to determine if PVLI found in TKAs at the time of aseptic revision surgery was associated with worse clinical outcomes and survivorship.

METHODS

A retrospective review was conducted on 617 patients who underwent aseptic TKA revision who had histological analysis for PVLI at the time of surgery. Clinical and radiological data were obtained pre- and postoperatively, six weeks postoperatively, and then every year thereafter.

RESULTS

Within this cohort, 118 patients (19.1%) were found to have PVLI on histological analysis. Re-revision was performed on 83 patients (13.4%) with no significant differences in all-cause or aseptic revisions between groups. A higher incidence of PVLI was noted in female patients (p = 0.037). There was no significant difference in improvement in the range of motion (p = 0.536), or improvement of KSC (p = 0.66), KSP (p = 0.61), or KSF (p = 0.3) clinical outcome scores between PVLI and no PVLI sub-groups. There was a higher incidence of a preoperative diagnosis of pain in the PVLI group compared with patients without PVLI (p = 0.002) present.

CONCLUSION

PVLI found on large-scale histological analysis in TKAs at aseptic revision surgery was not associated with worse clinical outcomes or rates of re-revision. Cite this article: Bone Joint J 2021;103-B(6 Supple A):145-149.

What the Surgeon Can Do to Reduce the Risk of Trunnionosis in Hip Arthroplasty: Recommendations from the Literature

Trunnionosis, defined as wear and corrosion at the head–neck taper connection, is a cause of failure in hip arthroplasty. Trunnionosis is linked to a synergistic combination of factors related to the prosthesis, the patient, and the surgeon. This review presents analytical models that allow for the quantification of the impact of these factors, with the aim of providing practical recommendations to help surgeons minimize the occurrence of this failure mode. A tighter fit reduces micromotion and, consequently, fretting of the taper connection. The paramount parameters controlling the fixation force are the coefficient of friction and the impaction force. The influence of the head diameter, as well as of the diameter and angle of the taper, is comparatively small, but varus alignment of the taper and heads with longer necks are unfavourable under physiologic loads. The trunnion should be rinsed, cleaned, and dried carefully, while avoiding any contamination of the bore—the female counterpart within the head—prior to assembly. Biological debris, and even residual water, might critically reduce the fixation of the taper connection between the head and the neck. The impaction force applied to the components should correspond to at least two strong blows with a 500 g hammer, striking the head with an ad hoc impactor aligned with the axis of the taper. These strong blows should correspond to a minimum impaction force of 4000 N.

Pseudotumors and High-Grade Aseptic Lymphocyte-Dominated Vasculitis-Associated Lesions Around Total Knee Replacements Identified at Aseptic Revision Surgery: Findings of a Large-Scale Histologic Review

BACKGROUND

Aseptic lymphocyte-dominated vasculitis-associated lesion (ALVAL) development (including pseudotumors) secondary to metal debris generation around total hip arthroplasties is a well-recognized histopathologic phenomenon. Emerging data have highlighted a similar potential concern around TKAs although the body-of-knowledge has largely been limited to individual case reports or small retrospective case series. This study sought to establish the prevalence of pseudotumors or high-grade ALVALs seen at the revision of primary TKAs and to establish the correlation between histologic ALVAL grade and patient-reported functional outcome measures.

METHODS

The findings of 321 non-infective (aseptic) patients undergoing unilateral revision knee surgery, at a high-volume tertiary referral center, were reviewed. Each case was independently histologically classified. Complete patient-reported functional outcome measures were available for 134 patients (42%) allowing correlation between functional performance and histopathology results.

RESULTS

Five distinct pseudotumors and a further 18 high-grade ALVALs were histologically identified representing 1.6% and 5.6% of the cohort, respectively. When compared by histologic grade, Oxford Knee Score and Western Ontario and McMaster University's Osteoarthritis Index suggested a high correlation between ALVAL grade and functional knee scores.

CONCLUSION

These findings suggest a prevalence of pseudotumors or high-grade ALVALs at revision TKA surgery of >7%. This unexpectedly high result may contribute insight into the previously under-appreciated significance of metal debris-related local tissue reactions around TKAs. The findings also demonstrate a strong near-linear inverse relationship between patient-reported clinical knee performance and the underlying histologic grade of local tissue reaction. These results have potential management implications for patients with underperforming TKAs and should prompt consideration of an ALVAL secondary to metallosis in the differential diagnosis.

LEVEL OF EVIDENCE

This is a retrospective cohort study with Level III evidence.