Expression and characterization of codon-optimized carbonic anhydrase from Dunaliella species for CO(2) sequestration application

Isolation, Identification, and Carbonate Mineralization Characteristics of a Newly Carbonic Anhydrase-Producing Strain

Carbonic anhydrase-producing microorganisms can rely on their metabolism for carbon sequestration and carbonate precipitation, which is a relatively effective mode among the known microbially induced carbonate precipitation (MICP) methods. A newly carbonic anhydrase-producing strain was isolated from soil samples. 16S rDNA gene sequencing showed this strain had 99.18% sequence identity to Chryseobacterium gambrini. Various culture parameters (temperature, pH, rotational speed, inoculum size, and metal ions) were optimized for optimal microbial growth and CA activities. Optimal culture conditions were as follows: temperature of 30 °C, pH 6-7, rotational speed 150 rpm, and inoculum size 1%. It was observed that Co2+ and Mn2+ can improve CA activity with optimal concentrations of 0.02 mM and 0.01 mM, respectively. Furthermore, the introduction of CO2 for 15 min daily leads to a 36% increase in the final production of biotic CaCO3, reaching 2.884 g/L. Characterization of the mineralization precipitates was conducted to reveal the mechanism of the carbonic anhydrase-producing bacterium. Lastly, an analysis of the crystalline species and content of the biogenic CaCO3 was performed to lay the groundwork for future crystalline adjustments and to offer technical support for the application of the calcium method.

Biomineralization Process of CaCO3 Precipitation Induced by Bacillus mucilaginous and Its Potential Application in Microbial Self-healing Concrete

Microbial induced calcium carbonate precipitation (MICP) is widely common in nature, which belongs to biomineralization and has been explored carefully in recent decades. The paper studied the effect of temperature, initial pH value and Ca2+ concentration on bacterial growth and carbonic anhydrase activity, and then revealed the biomineralization process through the changes of Ca2+ concentration and calcification rate in alkali environment. Meanwhile, microbial healing agent containing spores and calcium nitrate was prepared and used for the early age concrete cracks repair. The self-healing efficiency was assessed by crack closure rate and water permeability repair rate. The experimental results showed that when the optimal temperature was 30 °C, the pH was 8.0-11.0, and the optimal Ca2+ concentration was 0-90 mM, the bacteria could grow better and the carbonic anhydrase activity was higher. Compared with reference, the crack closure rate with the crack width up to 0.339 mm could reach 95.62% and the water permeability repair rate was 87.54% after 28 d healing time of dry-wet cycles. XRD analysis showed that the precipitates at the crack mouth were calcite CaCO3. Meanwhile, the self-healing mechanism of mortar cracks was discussed in detail. In particular, there is no other pollution in the whole mineralization process, and the self-healing system is environmentally friendly, which provides a novel idea and method for the application of microbial self-healing concrete.

A review of biomineralization in healing concrete: Mechanism, biodiversity, and application

Concrete is the main ingredient in construction, but it inevitably fractures during its service life, requiring a large amount of cement and aggregate for maintenance. Concrete healing through biomineralization can repair cracks and improve the durability of concrete, which is conducive to saving raw materials and reducing carbon emissions. This paper reviews the biodiversity of microorganisms capable of precipitating mineralization to repair the concrete and their mineralization ability under different conditions. To better understand the mass transfer process of precipitates, two biomineralization mechanisms, microbially-controlled mineralization and microbially-induced mineralization, have been briefly described. The application of microorganisms in the field of healing concrete, comprising passive healing and intrinsic healing, is discussed. The key insight on the interaction between cementitious materials and microorganisms is the main approach for developing novel self-healing concrete in the future to improve the corrosion resistance of concrete. At the same time, the limitations and challenges are also pointed out.

Bioprospecting Microalgae from Sewage Water: Assessment of Biochemicals for Biomass Utilization

Microalgal species from sewage treatment plant were identified by 18S rRNA sequencing and were explored for total lipids, carbohydrate, and protein contents, to serve as a potential candidate for biorefinery. Seven unicellular microalgae were identified as Chlorella sorokiniana, Dictyosphaerium sp., Graesiella emersonii belonging to Chlorellaceae and Scenedesmus sp., Desmodesmus sp., Tetranephris brasiliensis, and Coelastrella sp. belonging to Scenedesmaceae family. Biochemical assessment of all isolates revealed total lipid content from 17.49 ± 1.41 to 47.35 ± 0.61% w/w, total carbohydrate content from 12.82 ± 0.19 to 64.29 ± 0.63% w/w, and total protein content from 8.55 ± 0.19 to 16.65 ± 0.20% w/w. FAME analysis of extracted lipid was found to be rich in Hexadecane (C16:0), Tetradecane (C17:0), Octadecane (C18:0), Eicosane (C20:0), Tetracosane (C24:0), Pentacosane (C25:0) fatty acids, the presence of which makes excellent candidate for biodiesel. Being rich in lipid, microalgae Chlorella sorokiniana, Coelastrella sp., and Scenedesmus sp. have high potential for biofuels. Due to the presence of high protein content, Scenedesmus sp. and Chlorella sorokiniana can serve as food or feed supplement, whereas the high carbohydrate content of Dictyosphaerium sp., Coelastrella sp., and Scenedesmus sp. makes them an ideal candidate for fermentative production of alcohol and organic acids. Chlorella sp. and Scenedesmus sp., being dominant microalgae across all seasons, demonstrate remarkable resilience for their cultivation in sewage water and utilization of biomass in biorefineries.

Role of carbon-dioxide sequestering bacteria for clean air environment and prospective production of biomaterials: a sustainable approach

The increase in demand of fossil fuel uses for developmental activity and manufacturing of goods have resulted a huge emission of global warming gases (GWGs) in the atmosphere. Among all GWGs, CO₂ is the major contributor that inevitably causes global warming and climate change. Mitigation strategies like biological CO₂ capture through sequestration and their storage into biological organic form are used to minimize the concentration of atmospheric CO₂ with the goal to control climate change. Since increasing atmospheric CO₂ level supports microbial growth and productivity thus microbial-based CO₂ sequestration has remarkable advantages as compared to plant-based sequestration. This review focuses on CO₂ sequestration mechanism in bacteria through different carbon fixation pathways, involved enzymes, their role in calcite, and other environmentally friendly biomaterials such as biofuel, bioplastic, and biosurfactant.

Microbial Carbonic Anhydrases in Biomimetic Carbon Sequestration for Mitigating Global Warming: Prospects and Perspectives

All the leading cities in the world are slowly becoming inhospitable for human life with global warming playing havoc with the living conditions. Biomineralization of carbon dioxide using carbonic anhydrase (CA) is one of the most economical methods for mitigating global warming. The burning of fossil fuels results in the emission of large quantities of flue gas. The temperature of flue gas is quite high. Alkaline conditions are necessary for CaCO3 precipitation in the mineralization process. In order to use CAs for biomimetic carbon sequestration, thermo-alkali-stable CAs are, therefore, essential. CAs must be stable in the presence of various flue gas contaminants too. The extreme environments on earth harbor a variety of polyextremophilic microbes that are rich sources of thermo-alkali-stable CAs. CAs are the fastest among the known enzymes, which are of six basic types with no apparent sequence homology, thus represent an elegant example of convergent evolution. The current review focuses on the utility of thermo-alkali-stable CAs in biomineralization based strategies. A variety of roles that CAs play in various living organisms, the use of CA inhibitors as drug targets and strategies for overproduction of CAs to meet the demand are also briefly discussed.

Expression and characterization of a codon-optimized alkaline-stable carbonic anhydrase from Aliivibrio salmonicida for CO2 sequestration applications

The CO₂ mineralization process, accelerated by carbonic anhydrase (CA) was proposed for the efficient capture and storage of CO₂, the accumulation of which in the atmosphere is the main cause of global warming. Here, we characterize a highly stable form of the cloned CA from the Gram-negative marine bacterium Aliivibrio salmonicida, named ASCA that can promote CO₂ absorption in an alkaline solvent required for efficient carbon capture. We designed a mature form of ASCA (mASCA) using a codon optimization of ASCA gene and removal of ASCA signal peptide. mASCA was highly expressed (255 mg/L) with a molecular weight of approximately 26 kDa. The mASCA enzyme exhibited stable esterase activity within a temperature range of 10-60 °C and a pH range of 6-11. mASCA activity remained stable for 48 h at pH 10. We also investigated its inhibition profiles using inorganic anions, such as acetazolamide, sulfanilamide, iodide, nitrate, and azide. We also demonstrate that mASCA is capable of catalyzing the conversion of CO₂ to CaCO₃ (calcite form) in the presence of Ca²⁺. It should be noted that mASCA enzyme exhibits high production yield and sufficient stabilities against relatively high temperature and alkaline pH, which are required conditions for the development of more efficient enzymatic CCS systems.

Improvement of the phosphoenolpyruvate carboxylase activity of Phaeodactylum tricornutum PEPCase 1 through protein engineering

In order to mitigate CO2 accumulation and decrease the rate of global warming and climate change, we previously presented a strategy for the development of an efficient CO2 capture and utilization system. The system employs two recombinant enzymes, carbonic anhydrase and phosphoenolpyruvate carboxylase, which were originated from microalgae. Although utilization of this integrated system would require a large quantity of high quality PEPCase protein, such quantities could be produced by increasing the solubility of the Phaeodactylum tricornutum PEPCase 1 (PtPEPCase 1) protein in the Escherichia coli heterologous expression system. We first expressed the putative mitochondria targeting peptide- and chloroplast transit peptide-truncated proteins of PtPEPCase 1, mPtPEPCase 1 and cPtPEPCase 1, respectively, in E. coli. After affinity chromatography, the amount of purified PEPCase protein from 500mL of E. coli culture was greatest for cPtPEPCase 1 (1.99mg), followed by mPtPEPCase 1 (0.82mg) and PtPEPCase 1 (0.61mg). Furthermore, the enzymatic activity of mPtPEPCase 1 and cPtPEPCase 1 showed approximately 1.6-fold (32.19 units/mg) and 3-fold (59.48 units/mg) increases, respectively. Therefore, cPtPEPCase 1 purified using the E. coli heterogeneous expression system could be a strong candidate for a platform technology to capture CO2 and produce value-added four-carbon platform chemicals.

Carbonic anhydrases in industrial applications

Carbonic anhydrases (CAs) catalyze a fundamental reaction: the reversible hydration and dehydration of carbon dioxide (CO2) and bicarbonate ([Formula: see text]), respectively. Current methods for CO2 capture and sequestration are harsh, expensive, and require prohibitively large energy inputs, effectively negating the purpose of removing CO2 from the atmosphere. Due to CA's activity on CO2 there is increasing interest in using CAs for industrial applications such as carbon sequestration and biofuel production. A lot of work in the last decade has focused on immobilizing CA onto various supports for incorporation into CO2 scrubbing applications or devices. Although the proof of principle has been validated, current CAs being tested do not withstand the harsh industrial conditions. The advent of large-scale genome sequencing projects has resulted in several emerging efforts seeking out novel CAs from a variety of microorganisms, including bacteria, micro-, and macro-algae. CAs are also being investigated for their use in medical applications, such drug delivery systems and artificial lungs. This review also looks at possible downstream uses of captured and sequestered CO2, from using it to enhance oil recovery to incorporating it into useful and financially viable products.