Heavy Metal Stress and Its Consequences on Exopolysaccharide (EPS)-Producing Pantoea agglomerans

Biofilm Formation and Detoxification of Hexavalent Chromium by Bacillus subtilis: A Sustainable Approach to Bioremediation

Hexavalent chromium [Cr(VI)] is a toxic environmental pollutant, primarily generated by industrial processes, posing a significant risk to biota. Effective detoxification of Cr(VI) is necessary before environmental discharge. This study focused on the Cr(VI) tolerance and detoxification potential of an isolated Bacillus subtilis strain KCBA07C10, along with the effects of Cr(VI) stress on its biofilm formation, and its potential application in bioremediation. The bacterial strain isolated from treated textile effluent, was subjected to growth studies in Cr(VI)-supplemented media with a low carbon source. Detoxification potential was assessed through Cr(VI) and total Cr removal analyses, while biofilm formation was evaluated using spectrophotometric assays and scanning electron microscopy. Results revealed that B. subtilis KCBA07C10 tolerates high Cr(VI) concentrations (> 16.0 mg/L) and achieves significant detoxification via bioreduction, removing nearly 88% of Cr(VI) even under nutrient-limited conditions. These findings highlight the strain's potential for bioremediation. Furthermore, quantitative assays demonstrated a positive correlation between Cr(VI) exposure and biofilm formation (p = 0.009, α = 0.05), suggesting an adaptive defense mechanism. This study highlights the potential of B. subtilis KCBA07C10 as an eco-friendly agent for Cr(VI) detoxification and bioremediation applications.

Utilization of cyanobacterial adsorbents for remediation of lead ions from contaminated water: Insights into bioremediation strategies

This study investigates the adsorption mechanism of lead ions (Pb2+) on various forms of cyanobacterium Phormidium corium NRMC-50 adsorbents, such as exopolysaccharides (EPSs), capsular polysaccharides (CPSs), biomass without capsular polysaccharides (BCPSs), and native biomass (NB). An in-depth characterization of Pb2+ -loaded adsorbents was carried out to understand the changes that might have happened in their functional groups, surface morphology, elemental composition, and surface charge, due to adsorption. Further, Langmuir, Freundlich, and One-site-specific binding models were applied to investigate the effects of environmental parameters namely, temperature, pH, and initial Pb2+ concentrations on adsorption kinetics. Amongst all the adsorbents, polysaccharides exhibited the rapid removal efficiency of Pb2+, which might be attributed to the presence of functional groups such as carboxyl, hydroxyl, and amino groups in polysaccharides facilitating efficient Pb2+ adsorption. EPS demonstrates a high potential for rapid Pb2+ capture due to its high density of binding sites and substantial capacity. Box-Behnken model optimization confirms that pH and Pb concentrations in its environment significantly influence Pb2+ adsorption. Overall, this study underscores the efficacy of cyanobacteria in bioremediation applications, offering a sustainable and effective approach to mitigating heavy metal contamination in water systems and contributing to develop more efficient wastewater treatment solutions.

Amphora coffeiformis extracellular polymeric substances and their potential applications in lead removal

Microorganisms producing extracellular polymeric substances (EPS) are of great potential in numerous environmental applications. The present study explores the production and properties of extracellular polymeric substances (EPS) from Amphora coffeiformis diatom strain and their potential applications in environmental remediation. EPS were composed of a complex mixture of polysaccharides, proteins, humic substances and nucleic acids, with polyanionic characteristics as revealed by FTIR, Raman and zeta potential analyses. EPS showed high flocculation efficiency against kaolin clay at low dosages (5 mg/L) through a charge neutralization mechanism involving both polysaccharides and proteins. EPS also exhibited strong emulsification activity for various nonpolar substrates, mainly olive oil, corn oil, soybean oil, essence and diesel, with emulsification indexes above 80%. The emulsions were stable for 72 h under different NaCl concentrations (1-10% w/v). Moreover, EPS demonstrated remarkable adsorption capacity for lead, reaching a maximum of 1699.33 ± 89.61 mg/g under optimized conditions using Box-Behnken design. The adsorption mechanism involved multiple functional groups such as hydroxyl, carbonyl, carboxyl, phosphoric and sulfhydryl. Therefore, EPS from A. coffeiformis are a promising candidate for restoring environments contaminated by heavy metals.

Bacterial biofilm-based bioleaching: Sustainable mitigation and potential management of e-waste pollution

Significant advances in the electrical and electronic industries have increased the use of electrical and electronic equipment and its environmental emissions. The e-waste landfill disposal has deleterious consequences on human health and environmental sustainability, either directly or indirectly. E-waste containing ferrous and non-ferrous materials can harm the surrounding aquatic and terrestrial environments. Therefore, recycling e-waste and recovering metals from it before landfill disposal is an important part of environmental management. Although various chemical and physical processes are being used predominantly to recover metals from e-waste, the bioleaching process has gained popularity in recent years due to its eco-friendliness and cost-effectiveness. Direct contact between microbes and e-waste is crucial for continuous metal dissolution in the bio-leaching process. Biofilm formation is key for the continuous dissolution of metals from e-waste in contact bioleaching. Critical reviews on microbial activities and their interaction mechanisms on e-waste during metal bioleaching are scarce. Therefore, this review aims to explore the advantages and disadvantages of biofilm formation in contact bioleaching and the practical challenges in regulating them. In this review, sources of e-waste, available metallurgical methods, bioleaching process, and types of bioleaching microbes are summarized. In addition, the significance of biofilm formation in contact bioleaching and the role and correlation between EPS production, cyanide production, and quorum sensing in the biofilm are discussed for continuous metal dissolution. The review reveals that regulation of quorum sensing by exogenous and endogenous processes facilitates biofilm formation, leading to continuous metal dissolution in contact bioleaching.

Insights from a Genome-Wide Study of Pantoea agglomerans UADEC20: A Promising Strain for Phosphate Solubilization and Exopolysaccharides Production

The genome sequence of Pantoea agglomerans UADEC20 is presented, which is a strain isolated from agricultural fields in northeast Mexico. The genome was assembled into 13 scaffolds, constituting a total chromosome size of 4.2 Mbp, with two of the scaffolds representing closed plasmids. The strain exhibits activity in phosphate solubilization and exopolysaccharide (EPS) production and secretion; therefore, we explored its biotechnological potential via its genome sequencing and annotation. Genomic analyses showed that a total of 57 and 58 coding sequences (CDSs) related to phosphate solubilization and EPS production were identified within its genome, in addition to a reduced number of CDSs related to drug resistance and phages. The comprehensive set of genes supporting phosphate solubilization, EPS synthesis, and secretion, along with its low virulence and antibiotic resistance levels, justify further research for its potential biotechnological application and possible use as a plant growth-promoting agent in the field. These findings suggest a unique genetic background in the P. agglomerans UADEC20 strain.

Cu-tolerant Klebsiella variicola SRB-4 increased the nanoparticle (NP) stress resilience in garden peas (Pisum sativum L.) raised in soil polluted with varying doses of copper oxide (CuO)-NP

Utilizing metal/nanoparticle (NP)- tolerant plant growth-promoting rhizobacteria (PGPR) is a sustainable and eco-friendly approach for remediation of NP-induced phytotoxicity. Here, Pisum sativum (L.) plants co-cultivated with different CuO-NP concentrations exhibited reduced growth, leaf pigments, yield attributes, and increased oxidative stress levels. Cu-tolerant (800 µM) Klebsiella variicola strain SRB-4 (Accession no. OR715781.1) recovered from metal-contaminated soils produced various PGP traits, including IAA, EPS, siderophore, HCN, ammonia, and solubilized insoluble P. The PGP substances were marginally increased with increasing CuO-NP concentrations. When applied, Cu-tolerant SRB-4 strain increased root length (18%), root biomass (15.3%), total chlorophyll (29%), carotenoids (30%), root N (21%), root P (23%), total soluble protein (20%) nodule number (32%), nodule biomass (39%) and leghaemoglobin content (18%) in 50 µM CuO-NP-exposed peas. Furthermore, proline, malondialdehyde (MDA), superoxide radical, hydrogen peroxide (H2O2) content, and membrane injury in K. variicola-inoculated and 50 µM CuO-NP-treated plants were maximally and significantly (p ≤ 0.05) reduced by 70.6, 26.8, 60.8, and 71.6%, respectively, over uninoculated but treated with similar NP doses. Moreover, K. variicola inoculation caused a significant (p ≤ 0.05) decline in Cu uptake in roots (71%), shoots (65.5%), and grains (76.4%) of peas grown in soil contaminated with 50 µM CuO-NP. The multivariate i.e. heat map and pearson correlation analyses between the NP-treated and PGPR inoculated parameters revealed a significant and strong positive corelation. The NP-tolerant indigenous beneficial K. variicola could be applied as an alternative to enhance the production of P. sativum cultivated in nano-polluted soil systems. Additionally, more investigation is required to ascertain the seed/soil inoculation effect of K. variicola SRB-4 on soil biological activities and different crops under various experimental setups.

Mode of application of sulfonated graphene modulated bioavailable heavy metal contents and microbial community composition in long-term heavy metal contaminated soil

Nanomaterials are increasingly recognized for their potential in soil remediation. However, their impact on soil microbial communities in contaminated soil remains poorly understood. In this study, we investigated the dynamic effects of sulfonated graphene (SG) following one-time or repeated applications on heavy metal availability and soil microbial communities in long-term heavy metal-contaminated soil over 180 days. Our findings revealed that one-time SG application at 30 mg kg-1 significantly increased the bioavailable cadmium (Cd) and copper (Cu) contents by approximately 30 %-40 % after 2 and 180 days. Repeated SG applications, however, displayed no significant influence on heavy metal availability. One-time SG application, coupled with the increased available Cd, induced significant enrichment of some specific functional bacterial genera involved in glycan biosynthesis metabolism and biosynthesis of other secondary metabolites, thereby decreasing the available contents of heavy metals after 90 days. However, the shifts in bacterial community structure and function were subsequently partially recovered after 180 days. Conversely, repeated SG treatments led to minimal alterations after 90 days while leading to similar shifts in the bacterial community at 60 mg kg-1 after 180 days. The fungal community structure remained largely unaltered across all SG treatments. Intriguingly, SG treatments substantially stimulated fungal biomass, with the stimulation degree dependent on SG dosage. These results provide valuable insights for developing phytoremediation strategies, suggesting tailored SG applications during specific growth phases to optimize remediation efficiency.

Isolation of Heavy Metal-Tolerant and Anti-Phytopathogenic Plant Growth-Promoting Bacteria from Soils

In this study, multifunctional soil bacteria, which can promote plant development, resist heavy metals, exhibit anti-phytopathogenic action against plant diseaes, and produce extracellular enzymes, were isolated to improve the effectiveness of phytoremediation techniques. In order to isolate multifunctional soil bacteria, a variety of soil samples with diverse characteristics were used as sources for isolation. To look into the diversity and structural traits of the bacterial communities, we conducted amplicon sequencing of the 16S rRNA gene on five types of soils and predicted functional genes using Tax4Fun2. The isolated bacteria were evaluated for their multifunctional capabilities, including heavy metal tolerance, plant growth promotion, anti-phytopathogenic activity, and extracellular enzyme activity. The genes related to plant growth promotion and anti-phytopathogenic activity were most abundant in forest and paddy soils. Burkholderia sp. FZ3 and FZ5 demonstrated excellent heavy metal resistance (≤ 1 mM Cd and ≤ 10 mM Zn), Pantoea sp. FC24 exhibited the highest protease activity (24.90 μmol tyrosine·g-DCW-1·h-1), and Enterobacter sp. PC20 showed superior plant growth promotion, especially in siderophore production. The multifunctional bacteria isolated using traditional methods included three strains (FC24, FZ3, and FZ5) from the forest and one strain (PC20) from paddy field soil. These results indicate that, for the isolation of beneficial soil microorganisms, utilizing target gene information obtained from isolation sources and subsequently exploring target microorganisms is a valuable strategy.

Elicitors fortifies the plant resilience against metal and metalloid stress

This review addresses plant interactions with HMs, emphasizing defence mechanisms and the role of chelating agents, antioxidants and various elicitor molecules in mitigating metal toxicity in plants. To combat soil contamination with HMs, chelate assisted phytoextraction using application of natural or synthetic aminopolycarboxylic acids is an effective strategy. Plants also employ diverse signaling pathways, including hormones, calcium, reactive oxygen species, nitric oxide, and Mitogen-Activated Protein Kinases influencing gene expression and defence mechanisms to counter HM stress. Phytohormones enhance the enzymatic and non-enzymatic antioxidant defence mechanism and the level of secondary metabolites in plants when exposed to HM stress. Also it activates genes responsible for DNA repair mechanism. In addition, the plant hormones can also regulate the activity of several transporters of HMs, thereby preventing their entry into the cell. Elicitor molecules regulate metal and metalloid absorption, sequestration and transport in plants. Combining of different elicitors like jasmonic acid, calcium, salicylic acid etc. effectively mitigates metal and metalloid stress in plants. Moreover, microbes including bacteria and fungi, offer eco-friendly and efficient solution for HM remediation. Understanding these elicitors, microbes and various signaling pathways is crucial for developing strategies to enhance plant resilience to metal and metalloid stress.

Optimization of extracellular polysaccharides (EPS) production by Stenotrophomonas rhizophila JC1 and its protective effect on alfalfa under Pb2+ stress

Stenotrophomonas rhizophila JC1 and its extracellular polysaccharides (EPS) have been shown to effectively adsorb heavy metals in previous studies. The fermentation conditions of EPS by S. rhizophila JC1 were optimized using the Box-Behnken design (BBD). The composition, structural characteristics, and heavy metal adsorption capacity of EPS were systematically evaluated. The alleviation mechanism of Pb2+ stress on alfalfa was investigated through EPS inoculation. The maximum EPS yield reached 0.313 %. EPS consisted of glucose, glucosamine, galactose, and mannose in a molar ratio of 12.20:1:22.29:1.68. EPS also contained four distinct polymers with molecular weights of 623,683.71 Da, 144,072.27 Da, 105,892.21 Da, and 51,094.79 Da. The adsorption processes conformed to the pseudo-second-order model and Langmuir isotherm model. High Pb2+ concentrations significantly reduced germination percentage, germinative force, root length, fresh weight, and soluble protein, inhibited photosynthesis, exacerbated oxidative stress, and caused damage to the antioxidant system, thereby inhibiting seedling growth. EPS at low concentrations can promote alfalfa seed germination and mitigate Pb2+ stress by reducing the aforementioned damage. This study highlights the potential of EPS in soil remediation and enhancing plant resistance to heavy metal stress.

Exopolysaccharide-Producing Bacteria Regulate Soil Aggregates and Bacterial Communities to Inhibit the Uptake of Cadmium and Lead by Lettuce

The accumulation of heavy metals in the soil not only causes serious damage to the soil ecosystem, but also threatens human health through the food chain. Exopolysaccharides have the functions of adsorbing and chelating heavy metals and reducing their bioavailability in the soil. In our study, exopolysaccharide-producing bacteria with a high efficiency in adsorbing cadmium (Cd) and lead (Pb) were screened from heavy metal-contaminated farmland. Through pot experiments, the influence of functional strains on the size distribution, heavy metal content, and bacterial community structure of soil aggregates in lettuce was studied using high-throughput sequencing technology. The results show that 11 strains secreting exopolysaccharides were initially screened from heavy metal-contaminated soil. Among them, strain Z23 had a removal rate of 88.6% for Cd and 93.2% for Pb. The rate at which Cd was removed by strain Z39 was 92.3%, and the rate at which Pb was removed was 94.4%. Both strains belong to Bacillus sp. Strains Z23 and Z39 induced the formation of Fe2Pb(PO4)2, Cd2(PO4)2, and Pb2O3 in the solution. The pot experiments showed that strains Z23 and Z39 increased (19.1~23.9%) the dry weight and antioxidant enzyme activity of lettuce roots and leaves, while reducing (40.1~61.7%) the content of Cd and Pb. Strains Z23 and Z39 increased the proportion of microaggregates (<0.25 mm) and the content of exopolysaccharides in rhizosphere soil and reduced (38.4-59.7%) the contents of available Cd and Pb in microaggregates, thus inhibiting the absorption of heavy metals by lettuce. In addition, the exopolysaccharide content and the bacterial community associated with heavy metal resistance and nitrogen (N) cycling (Patescibacteria, Saccharimonadales, Microvirga, and Pseudomonas) in microaggregates were key factors affecting the available heavy metal content in soil. These results show that the exopolysaccharide-producing bacteria Z23 and Z39 reduced the absorption of Cd and Pb by lettuce tissues, thus providing strain resources for the safe utilization of soils that exceed heavy metal standards for farmland and for reducing the heavy metal content in vegetables.

The quorum sensing SinI/SinR-TraI/TraR systems promote Pb stabilization by Ensifer adhaerens S24 in the Pb-polluted aquatic environment

In this study, the Pb-resistant Ensifer adhaerens strain S24, which contains quorum sensing (QS) systems responsible for N-acyl homoserine lactone (AHL) production, was investigated for QS system-mediated Pb stabilization and the underlying mechanisms. Whole-genome sequence analysis revealed the QS SinI/R and TraI/R systems in strain S24. Subsequently, strains S24 and the S24∆sinI/R, S24∆traI/R, S24∆traI/R/sinR, and S24∆sinI/R-traI/R/sinR mutants were constructed and compared for QS SinI/SinR-TraI/TraR system-mediated Pb stabilization in the solution and the mechanisms involved. After 5 days of incubation, strain S24 significantly decreased the Pb concentration in the Pb-contaminated solution compared with the mutants. The S24∆sinI/R-traI/R/sinR mutant exhibited reduced Pb stabilization and AHL activity than the other mutants. The S24∆sinI/R-traI/R/sinR mutant had significantly greater Pb concentrations in the solution and lower cell surface-adsorbed and extracellular precipitated Pb (PbS) contents as well as lower expression of H2S-producing genes of metC and sseA than did strain S24. Furthermore, the S24∆sinI/R-traI/R/sinR mutant displayed reduced interactions between the hydroxyl, amino, carboxyl, and ether groups and Pb, compared with strain S24. These findings implied the vital role of the SinI/SinR-TraI/TraR systems in strain S24 for Pb stabilization through enhanced cell surface adsorption and extracellular precipitation in Pb-polluted aquatic environments.

Influence of Copper on Oleidesulfovibrio alaskensis G20 Biofilm Formation

Copper is known to have toxic effects on bacterial growth. This study aimed to determine the influence of copper ions on Oleidesulfovibrio alaskensis G20 biofilm formation in a lactate-C medium supplemented with variable copper ion concentrations. OA G20, when grown in media supplemented with high copper ion concentrations of 5, 15, and 30 µM, exhibited inhibited growth in its planktonic state. Conversely, under similar copper concentrations, OA G20 demonstrated enhanced biofilm formation on glass coupons. Microscopic studies revealed that biofilms exposed to copper stress demonstrated a change in cellular morphology and more accumulation of carbohydrates and proteins than controls. Consistent with these findings, sulfur (dsrA, dsrB, sat, aprA) and electron transport (NiFeSe, NiFe, ldh, cyt3) genes, polysaccharide synthesis (poI), and genes involved in stress response (sodB) were significantly upregulated in copper-induced biofilms, while genes (ftsZ, ftsA, ftsQ) related to cellular division were negatively regulated compared to controls. These results indicate that the presence of copper ions triggers alterations in cellular morphology and gene expression levels in OA G20, impacting cell attachment and EPS production. This adaptation, characterized by increased biofilm formation, represents a crucial strategy employed by OA G20 to resist metal ion stress.

Co-removal and recycling of Ba2+ and Ca2+ in hypersaline wastewater based on the microbially induced carbonate precipitation technique: Overlooked Ba2+ in extracellular and intracellular vaterite

This study investigates the co-precipitation of calcium and barium ions in hypersaline wastewater under the action of Bacillus licheniformis using microbially induced carbonate precipitation (MICP) technology, as well as the bactericidal properties of the biomineralized product vaterite. The changes in carbonic anhydrase activity, pH, carbonate and bicarbonate concentrations in different biomineralization systems were negatively correlated with variations in metal ion concentrations, while the changes in polysaccharides and protein contents in bacterial extracellular polymers were positively correlated with variations in barium concentrations. In the mixed calcium and barium systems, the harvested minerals were vaterite containing barium. The increasing concentrations of calcium promoted the incorporation and adsorption of barium onto vaterite. The presence of barium significantly increased the contents of O-CO, N-CO, and Ba-O in vaterite. Calcium promoted barium precipitation, but barium inhibited calcium precipitation. After being treated by immobilized bacteria, the concentrations of calcium and barium ions decreased from 400 and 274 to 1.72 and 0 mg/L (GB/T15454-2009 and GB8978-1996). Intracellular minerals were also vaterite containing barium. Extracellular vaterite exhibited bactericidal properties. This research presents a promising technique for simultaneously removing and recycling hazardous heavy metals and calcium in hypersaline wastewater.

Comparative Genomic and Functional Analyses for Insights into Pantoea agglomerans Strains Adaptability in Diverse Ecological Niches

Pantoea agglomerans inhabit diverse ecological niches, ranging from epiphytes and endophytes in plants, body of animals, and occasionally in the human system. This multifaceted bacterium contributes substantially to plant growth promotion, stress resilience, and biocontrol but can also act as a pathogen to its host. The genetic determinants underlying these diverse functions remain largely unfathomed and to uncover this phenomenon, nineteen strains of Pantoea agglomerans were selected and analyzed. Genome-to-Genome Distance Calculator (GGDC) which uses the Genome Blast Distance Phylogeny (GBDP) technique to calculate digital DDH values. Phylogenetic analysis via Genome-to-Genome distance, Average Nucleotide Identity, and Amino Acid Identity calculation revealed that all strains belonged to the genus Pantoea. However, strain 33.1 had a lower value than the threshold for the same species delineation. Bacterial Pan Genome Analysis (BPGA) Pipeline and MinPath analysis revealed genetic traits associated with environmental resilience, such as oxidative stress, UV radiation, temperature extremes, and metabolism of distinct host-specific carbohydrates. Protein-protein interactome analysis illustrated osmotic stress proteins closely linked with core proteins, while heavy metal tolerance, nitrogen metabolism, and Type III and VI secretion systems proteins generally associated with pathogenicity formed a separate network, indicating strain-specific characteristics. These findings shed new light on the intricate genetic architecture of Pantoea agglomerans, revealing its adaptability to inhabit diverse niches and thrive in varied environments.

Smokeless Tobacco Harbors Bacteria Involved in Biofilm Formation as Well as Salt and Heavy Metal Tolerance Activity

In our previous culture-independent study on smokeless tobacco products, we have observed a strong positive correlation between several bacteria and genes involved in nitrate/nitrite reduction, biofilm formation, and pro-inflammation. Therefore, the present investigation was carried out to analyze the inhabitant bacterial population of the Indian ST products for assessing the health-associated risk attributes using culture-dependent approach. Traditional cultivation approaches recovered several bacterial isolates from commercial ST products on different culture media. A high colony formation unit (CFU) count was observed that ranged from 173 × 104 to 630.4 × 105 per gram of ST products. Of the 74 randomly selected and distinct bacterial isolates, 17 isolates showed a significantly enhanced growth (p-value < 0.05) in the presence of the aqueous tobacco extract. On biochemical characterization, these bacteria were identified as the member of Bacillus, Enterobacter, Micrococcus, Providencia, Serratia, Pantoea, Proteus, and Pseudomonas. Most of these bacteria also exhibited biofilm-forming activity, where eight bacterial isolates were identified for strong biofilm-forming action. 16S rRNA-based molecular characterization of these bacteria identified them as Bacillus subtilis, Bacillus paralicheniformis, Enterobacter sp., Serratia marcescens, Pantoea anthophila, and Enterobacter cloacae. Moreover, these bacteria also exhibited the potential to withstand high salt and heavy metal concentrations. The findings demonstrate that Indian ST products are heavily populated with wide bacterial species exhibiting potential in biofilm formation, heavy metal resistance, and salt tolerance.

Deciphering the mechanistic role of Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52) in bio-sorption and phyto-assimilation of Cadmium via Linum usitatissimum L. Seedlings

Three Cd2+ resistant bacterium's minimal inhibition concentrations were assessed and their percentages of Cd2+ accumulation were determined by measurements using an atomic absorption spectrophotometer (AAS). The results revealed that two isolates Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52), identified by 16S rDNA gene sequencing, showed a higher percentage of Cd2+ accumulation i.e., 83.78% and 81.79%, respectively. Moreover, both novel strains can tolerate Cd2+ levels up to 2000 mg/L isolated from district Chakwal. Amplification of the czcD, nifH, and acdS genes was also performed. Batch bio-sorption studies revealed that at pH 7.0, 1 g/L of biomass, and an initial 150 mg/L Cd2+ concentration were the ideal bio-sorption conditions for Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52). The experimental data were fit to Langmuir isotherm measurements and Freundlich isotherm model R2 values of 0.999 for each of these strains. Bio sorption processes showed pseudo-second-order kinetics. The intra-diffusion model showed Xi values for Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52) of 2.26 and 2.23, respectively. Different surface ligands, was investigated through Fourier-transformation infrared spectroscopy (FTIR). The scanning electron microscope SEM images revealed that after Cd2+ adsorption, the cells of both strains became thick, adherent, and deformed. Additionally, both enhanced Linum usitatissimum plant seed germination under varied concentrations of Cd2+ (0 mg/L, 250 mg/L,350 mg/L, and 500 mg/L). Current findings suggest that the selected strains can be used as a sustainable part of bioremediation techniques.

Bioremediation of Pb contaminated water using a novel Bacillus sp. strain MHSD_36 isolated from Solanum nigrum

The Pb bioremediation mechanism of a multi-metal resistant endophytic bacteria Bacillus sp. strain MHSD_36, isolated from Solanum nigrum, was characterised. The strain tested positive for the presence of plant growth promoters such as indoleacetic acid, 1-aminocyclopropane-1-carboxylate deaminase, siderophores, and phosphate solubilization. The experimental data illustrated that exopolysaccharides and cell hydrophobicity played a role in Pb uptake. The data further showed that the cell wall biosorbed a significant amount (71%) of the total Pb (equivalent to 4 mg/L) removed from contaminated water, compared to the cell membrane (11%). As much as 11% of the Pb was recovered from the cytoplasmic fraction, demonstrating the ability of the strain to control the influx of toxic heavy metals into the cell and minimize their negative impacts. Pb biosorption was significantly influenced by the pH and the initial concentration of the toxic ions. Furthermore, the presence of siderophores and biosurfactants, when the strain was growing under Pb stress, was detected through liquid chromatography mass spectrometry. The strain demonstrated a multi-component based Pb biosorption mechanism and thus, has a great potential for application in heavy metal bioremediation.

A novel mycelial pellet applied to remove polycyclic aromatic hydrocarbons: High adsorption performance & its mechanisms

Mycelial pellets formed by Penicillium thomii ZJJ were applied as efficient biosorbents for the removal of polycyclic aromatic hydrocarbons (PAHs), which are a type of ubiquitous harmful hydrophobic pollutants. The live mycelial pellets were able to remove 93.48 % of pyrene at a concentration of 100 mg/L within 48 h, demonstrating a maximum adsorption capacity of 285.63 mg/g. Meanwhile, the heat-killed one also achieved a removal rate of 65.01 %. Among the six typical PAHs (pyrene, phenanthrene, fluorene, anthracene, fluoranthene, benzo[a]pyrene), the mycelial pellets preferentially adsorbed the high molecular weight PAHs, which also have higher toxicity, resulting in higher removal efficiency. The experimental results showed that the biosorption of mycelial pellets was mainly a spontaneous physical adsorption process that occurred as a monolayer on a homogeneous surface, with mass transfer being the key rate-limiting step. The main adsorption sites on the surface of mycelia were carboxyl and N-containing groups. Extracellular polymeric substances (EPS) produced by mycelial pellets could enhance adsorption, and its coupling with dead mycelia could achieve basically the same removal effect to that of living one. It can be concluded that biosorption by mycelial pellets occurred due to the influence of electrostatic and hydrophobic interactions, consisting of five steps. Furthermore, the potential applicability of mycelial pellets has been investigated considering diverse factors. The mycelia showed high environmental tolerance, which could effectively remove pyrene across a wide range of pH and salt concentration. And pellets diameters and humic acid concentration had a significant effect on microbial adsorption effect. Based on a cost-effectiveness analysis, mycelium pellets were found to be a low-cost adsorbent. The research outcomes facilitate a thorough comprehension of the adsorption process of pyrene by mycelial pellets and their relevant applications, proposing a cost-effective method without potential environmental issues (heat-killed mycelial pellets plus EPS) to removal PAHs.

Antimony precipitation and removal by antimony hyper resistant strain Achromobacter sp. 25-M

Microbes have been confirmed to play key role in biogeochemistry of antimony. However, the impact of indigenous bacteria (from active mines) on the behavior of dissolved antimony remained poorly understood. In current study, the hyper antimony-resistant strain, Achromobacter sp. 25-M, isolated from the world largest antimony deposit, Xikuangshan antimony deposit, was evaluated for its role in dissolved Sb(V) and Sb(III) precipitation and removal. Despite of the high resistance to Sb(III) (up to 50 mM), the facultative alkaliphile, 25-M was not capable of Sb(III) oxidation. Meanwhile 25-M can produce high amount of exopolymeric substance (EPS) with the presence of Sb, which prompted us to investigate the potential role of EPS in the precipitation and removal of Sb. To this end, 2 mM of Sb(III) and Sb(V) were added into the experimental systems with and without 25-M to discern the interaction mechanism between microbe and antimony. After 96 hrs' incubation, 88% [1.73 mM (210 mg/L)] of dissolved Sb(V) and 80% [1.57 mM (190 mg/L)] of dissolved Sb(III) were removed. X-ray diffraction and energy dispersive spectroscopy analysis confirmed the formation of valentinite (Sb2O3) in Sb(III) amended system and a solitary Sb(V) mineral mopungite [NaSb(OH)6] in Sb(V) amended group with microbes. Conversely, no precipitate was detected in abiotic systems. Morphologically valentinite was bowtie and mopungite was pseudo-cubic as indicated by scanning electronic microscopy. EPS was subjected to fourier transform infrared (FT-IR) analysis. FT-IR analysis suggested that -OH and -COO groups were responsible for the complexation and ligand exchange with Sb(III) and Sb(V), respectively. Additionally, the C-H group and N-H group could be involved in π-π interaction and chelation with Sb species. All these interactions between Sb and functional groups in EPS may subsequently favore the formation of valentinite and mopungite. Collectively, current results suggested that EPS play fundamental role in bioprecipitation of Sb, which offered a new strategy in Sb bioremediation.

Potential applications of extremophilic bacteria in the bioremediation of extreme environments contaminated with heavy metals

Protecting the environment from harmful pollutants has become increasingly difficult in recent decades. The presence of heavy metal (HM) pollution poses a serious environmental hazard that requires intricate attention on a worldwide scale. Even at low concentrations, HMs have the potential to induce deleterious health effects in both humans and other living organisms. Therefore, various strategies have been proposed to address this issue, with extremophiles being a promising solution. Bacteria that exhibit resistance to metals are preferred for applications involving metal removal due to their capacity for rapid multiplication and growth. Extremophiles are a special group of microorganisms that are capable of surviving under extreme conditions such as extreme temperatures, pH levels, and high salt concentrations where other organisms cannot. Due to their unique enzymes and adaptive capabilities, extremophiles are well suited as catalysts for environmental biotechnology applications, including the bioremediation of HMs through various strategies. The mechanisms of resistance to HMs by extremophilic bacteria encompass: (i) metal exclusion by permeability barrier; (ii) extracellular metal sequestration by protein/chelator binding; (iii) intracellular sequestration of the metal by protein/chelator binding; (iv) enzymatic detoxification of a metal to a less toxic form; (v) active transport of HMs; (vi) passive tolerance; (vii) reduced metal sensitivity of cellular targets to metal ions; and (viii) morphological change of cells. This review provides comprehensive information on extremophilic bacteria and their potential roles for bioremediation, particularly in environments contaminated with HMs, which pose a threat due to their stability and persistence. Genetic engineering of extremophilic bacteria in stressed environments could help in the bioremediation of contaminated sites. Due to their unique characteristics, these organisms and their enzymes are expected to bridge the gap between biological and chemical industrial processes. However, the structure and biochemical properties of extremophilic bacteria, along with any possible long-term effects of their applications, need to be investigated further.

Bacteria-loaded biochar for the immobilization of cadmium in an alkaline-polluted soil

The combination of biochar and bacteria is a promising strategy for the remediation of Cd-polluted soils. However, the synergistic mechanisms of biochar and bacteria for Cd immobilization remain unclear. In this study, the experiments were conducted to evaluate the effects of the combination of biochar and Pseudomonas sp. AN-B15, on Cd immobilization, soil enzyme activity, and soil microbiome. The results showed that biochar could directly reduce the motility of Cd through adsorption and formation of CdCO3 precipitates, thereby protecting bacteria from Cd toxicity in the solution. In addition, bacterial growth further induces the formation of CdCO3 and CdS and enhances Cd adsorption by bacterial cells, resulting in a higher Cd removal rate. Thus, bacterial inoculation significantly enhances Cd removal in the presence of biochar in the solution. Moreover, soil incubation experiments showed that bacteria-loaded biochar significantly reduced soil exchangeable Cd in comparison with other treatments by impacting soil microbiome. In particular, bacteria-loaded biochar increased the relative abundance of Bacillus, Lysobacter, and Pontibacter, causing an increase in pH, urease, and arylsulfatase, thereby passivating soil exchangeable Cd and improving soil environmental quality in the natural alkaline Cd-contaminated soil. Overall, this study provides a systematic understanding of the synergistic mechanisms of biochar and bacteria for Cd immobilization in soil and new insights into the selection of functional strain for the efficient remediation of the contaminated environments by bacterial biochar composite.

Mechanisms involved in the sequestration and resistance of cadmium for a plant-associated Pseudomonas strain

Understanding Cd-resistant bacterial cadmium (Cd) resistance systems is crucial for improving microremediation in Cd-contaminated environments. However, these mechanisms are not fully understood in plant-associated bacteria. In the present study, we investigated the mechanisms underlying Cd sequestration and resistance in the strain AN-B15. These results showed that extracellular Cd sequestration by complexation in strain AN-B15 was primarily responsible for the removal of Cd from the solution. Transcriptome analyses have shown that the mechanisms of Cd resistance at the transcriptional level involve collaborative processes involving multiple metabolic pathways. The AN-B15 strain upregulated the expression of genes related to exopolymeric substance synthesis, metal transport, Fe-S cluster biogenesis, iron recruitment, reactive oxygen species oxidative stress defense, and DNA and protein repair to resist Cd-induced stress. Furthermore, inoculation with AN-B15 alleviated Cd-induced toxicity and reduced Cd uptake in the shoots of wheat seedlings, indicating its potential for remediation. Overall, the results improve our understanding of the mechanisms involved in Cd resistance in bacteria and thus have important implications for improving microremediation.

Characterization on nicotine degradation and research on heavy metal resistance of a strain Pseudomonas sp. NBB

The remediation of polluted sites containing multiple contaminants like nicotine and heavy metals poses significant challenges, due to detrimental effects like cell death. In this study, we isolated a new strain Pseudomonas sp. NBB capable of efficiently degrading nicotine even in high level of heavy metals. It degraded nicotine through pyrrolidine pathway and displayed minimum inhibitory concentrations of 2 mM for barium, copper, and lead, and 5 mM for manganese. In the presence of 2 mM Ba2+ or Pb2+, 3 g L-1 nicotine could be completely degraded within 24 h. Moreover, under 0.5 mM Cu2+ or 5 mM Mn2+ stress, 24.13% and 72.56% of nicotine degradation were achieved in 60 h, respectively. Strain NBB tolerances metal stress by various strategies, including morphological changes, up-regulation of macromolecule transporters, cellular response to DNA damage, and down-regulation of ABC transporters. Notably, among the 153 up-regulated genes, cds_821 was identified as manganese exporter (MneA) after gene disruption and recovery experiments. This study presents a novel strain capable of efficiently degrading nicotine and displaying remarkable resistance to heavy metals. The findings of this research provide valuable insights into the potential application of nicotine bioremediation in heavy metal-contaminated areas.

Plant growth-promoting rhizobacteria: A good companion for heavy metal phytoremediation

Phytoremediation is an environment-friendly approach regarded as a potential candidate for remediating heavy metal (HM)-contaminated soils. However, the low efficacy of phytoremediation is a major limitation that hampers its large-scale application. Therefore, developing strategies to enhance phytoremediation efficacy for contaminated soils is crucial. Plant growth-promoting rhizobacteria (PGPR) considerably contribute to phytoremediation intensification. To improve the efficiency of plant-microbe symbiosis for remediation, the mechanisms underlying PGPR-stimulated HM accumulation and tolerance in plants should be comprehensively understood. This review focuses on hyperaccumulators, PGPR, and the mechanisms by which PGPR enhance phytoremediation from four aspects: providing nutrients to plants, secreting plant hormones and specific enzymes, inducing systemic resistance, and altering the bioavailability of HMs in soils. It also provides a theoretical and technical basis for future research on PGPR synergism in promoting the phytoextraction efficiency in HM-contaminated soils.

Biofilm-Mediated Heavy Metal Removal from Aqueous System by Multi-Metal-Resistant Bacterial Strain Bacillus sp. GH-s29

Worldwide ever-augmenting urbanization, modernization, and industrialization have contributed to the release of pernicious compounds and a variety of pollutants into the environment. The pollutants discharged due to industrialization are of global concern. Industrial waste and effluent are comprised of hazardous organic and inorganic chemicals including heavy metals which pose a significant threat to the environment and may bring about numerous diseases or abnormalities in human beings. This brings on greater urgency for remediation of these polluted soil and water using sustainable approaches and mechanisms. In the present research, a multi-metal-resistant, gram-positive, non-virulent bacterial strain Bacillus sp. GH-s29 was isolated from contaminated groundwater of Bhojpur district, Bihar, India. The strain had the potential to develop a biofilm that was able to remediate different heavy metals [arsenic, cadmium, and chromium] from individual and multi-heavy metal solutions. Maximum removal for As (V), Cd (II), and Cr (VI) from individual-metal and the multi-metal solution was observed to be 73.65%, 57.37%, 61.62%, and 48.92%, 28.7%, and 35.46%, respectively. SEM-EDX analysis revealed the sequestration of multi-heavy metals by bacterial biofilm. Further characterization by FTIR analysis ensured that the presence of negatively charged functional groups on the biofilm-EPS such as hydroxyl, phosphate, sulfate, and carboxyl helps in binding to the positively charged metal ions. Thus, Bacillus sp. GH-s29 proved to be an effective and economical alternative for different heavy metal remediation from contaminated sites.

Biosorption of hexavalent chromium and molybdenum ions using extremophilic cyanobacterial mats: efficiency, isothermal, and kinetic studies

Two extremophilic cyanobacterial-bacterial consortiums naturally grow in extreme habitats of high temperature and hypersaline were used to remediate hexavalent chromium and molybdenum ions. Extremophilic cyanobacterial-bacterial biomasses were collected from Zeiton and Aghormi Lakes in the Western Desert, Egypt, and were applied as novel and promising natural adsorbents for hexavalent chromium and molybdenum. Some physical characterizations of biosorbent surfaces were described using scanning electron microscope, energy-dispersive X-ray spectroscopy, Fourier transformation infrared spectroscopy, and surface area measure. The maximum removal efficiencies of both biosorbents were 15.62-22.72 mg/g for Cr(VI) and 42.15-46.29 mg/g for Mo(VI) at optimum conditions of pH 5, adsorbent biomass of 2.5-3.0 g/L, and 150 min contact time. Langmuir and Freundlich adsorption models were better fit for Cr(VI), whereas Langmuir model was better fit than the Freundlich model for Mo(VI) biosorption. The kinetic results revealed that the adsorption reaction obeyed the pseudo-second-order model confirming a chemisorption interaction between microbial films and the adsorbed metals. Zeiton biomass exhibited a relatively higher affinity for removing Cr(VI) than Aghormi biomass but a lower affinity for Mo(VI) removal. The results showed that these extremophiles are novel and promising candidates for toxic metal remediation.

Exopolymeric substances production by Bacillus cereus KMS3-1 enhanced its biosorption efficiency in removing Cd2+ and Pb2+ in single and binary metal mixtures

The present study investigated the growth, exopolymeric substance (EPS) production, and biosorption efficiency of strain Bacillus cereus KMS3-1 in the Cd²⁺ and Pb²⁺ ions containing single and binary metal-treated broth (50 mg/L). In addition, the interaction of the KMS3-1 strain with Cd²⁺ and Pb²⁺ ions in single and binary metal-treated broths was investigated using SEM-EDS, FTIR, and XRD analyses. The results showed that the biosorption efficiency (%) and EPS production of KMS3-1 biomass in both single and binary metal-treated broths had increased with increasing incubation time and were higher for Pb²⁺ ions than for Cd²⁺ ions. In the single and binary metal-treated broths, the maximum biosorption efficiency of KMS3-1 for Pb²⁺ ions were 70.8% and 46.3%, respectively, while for Cd²⁺ ions, they were 29.3% and 16.8%, respectively, after 72 h. Moreover, the biosorption efficiency of strain KMS3-1 for both metal ions was dependent on its EPS production and peaked at the maximum EPS production. The copious EPS production by KMS3-1 was observed in metal-treated media (50 mg/L), in the following order: Pb²⁺ ions (1925.7 μg/mL) > binary metal mixtures (1286.8 μg/mL) > Cd²⁺ ions (1185.5 μg/mL), > control (1099 μg/mL) after 72 h of incubation. This result indicates that the metal biosorption efficiency of the KMS3-1 strain was enhanced by the increased EPS production in the surrounding metal-treated broth. SEM-EDS and FTIR characterization studies revealed that the KMS3-1 biomass effectively adsorbed Cd²⁺ and Pb²⁺ ions from the medium by interacting with their surface functional groups (hydroxyl, carbonyl, carboxyl, amide, and phosphate). Moreover, the biosorbed Cd²⁺ and Pb²⁺ ions were transformed into CdS and PbS, respectively, by the KMS3-1 biomass. This study suggests that the Bacillus cereus KMS3-1 strain may be a promising candidate for the treatment of metal contamination.

Adsorption capacity of Penicillium amphipolaria XK11 for cadmium and antimony

Heavy metal pollution is a global problem that affects both the environment and human health. Microorganisms play an important role in remediation. Most studies on the use of microorganisms for heavy metal remediation focus on single heavy metals. In this study, a strain of Penicillium amphipolaria, XK11 with high resistance to both antimony (Sb III) and cadmium (Cd II) was screened from the mineral slag. The strain also had a high phosphate solubilization capacity. The single-factor adsorption experiment results showed that the initial pH (pH₀), adsorption time (T), and initial solution concentration (C₀) all affected the adsorption of Sb and Cd by XK11. When the initial pH₀ (Cd = 6, Sb = 4) and adsorption time (T = 7 d) were constant, XK11 achieved the maximum removal rate of Cd (45.6%) and Sb (34.6%). These results confirm that XK11 has potential as a biomaterial or remediation of Sb and Cd pollution.

Impacts of metal stress on extracellular microbial products, and potential for selective metal recovery

Harnessing microbial capabilities for metal recovery from secondary waste sources is an eco-friendly and sustainable approach for the management of metal-containing wastes. Soluble microbial products (SMP) and extracellular polymeric substances (EPS) are the two main groups of extracellular compounds produced by microorganisms in response to metal stress that are of great importance for remediation and recovery of metals. These include various high-, and low, molecular weight components, which serve various functional and structural roles. These compounds often contain functional groups with metal binding potential that can attenuate metal stress by sequestering metal ions, making them less bioavailable. Microorganisms can regulate the content and composition of EPS and SMP in response to metal stress in order to increase the compounds specificity and capacity for metal binding. Thus, EPS and SMP represent ideal candidates for developing technologies for selective metal recovery from complex wastes. To discover highly metal-sorptive compounds with specific metal binding affinity for metal recovery applications, it is necessary to investigate the metal binding affinity of these compounds, especially under metal stressed conditions. In this review we critically reviewed microbial EPS and SMP production as a response to metal stress with a particular emphasis on the metal binding properties of these compounds and their role in altering metal bioavailability. Furthermore, for the first time, we compiled the available data on potential application of these compounds for selective metal recovery from waste streams.

Anode Modification with Fe2O3 Affects the Anode Microbiome and Improves Energy Generation in Microbial Fuel Cells Powered by Wastewater

This study investigated how anode electrode modification with iron affects the microbiome and electricity generation of microbial fuel cells (MFCs) fed with municipal wastewater. Doses of 0.0 (control), 0.05, 0.1, 0.2, and 0.4 g Fe2O3 per the total anode electrode area were tested. Fe2O3 doses from 0.05 to 0.2 g improved electricity generation; with a dose of 0.10 g Fe2O3, the cell power was highest (1.39 mW/m2), and the internal resistance was lowest (184.9 Ω). Although acetate was the main source of organics in the municipal wastewater, propionic and valeric acids predominated in the outflows from all MFCs. In addition, Fe-modification stimulated the growth of the extracellular polymer producers Zoogloea sp. and Acidovorax sp., which favored biofilm formation. Electrogenic Geobacter sp. had the highest percent abundance in the anode of the control MFC, which generated the least electricity. However, with 0.05 and 0.10 g Fe2O3 doses, Pseudomonas sp., Oscillochloris sp., and Rhizobium sp. predominated in the anode microbiomes, and with 0.2 and 0.4 g doses, the electrogens Dechloromonas sp. and Desulfobacter sp. predominated. This is the first study to holistically examine how different amounts of Fe on the anode affect electricity generation, the microbiome, and metabolic products in the outflow of MFCs fed with synthetic municipal wastewater.

Genomic Analysis of a Novel Heavy Metal Resistant Isolate from a Black Sea Contaminated Sediment with the Potential to Degrade Alkanes: Plantactinospora alkalitolerans sp. nov

Microorganisms that grow in poorly studied environments are of special interest when new biotechnological applications are searched. The Melet river offshore sediments at the Black Sea have been described to contain an important number of contaminants from upstream industries which have been accumulating for years. Bacteria of such habitats must be adapted to the presence of those compounds and in some cases, are able to use them as carbon sources. In the analysis of some samples recovered from this environment, an actinobacterial strain was isolated, named as S1510T, and its taxonomic position was determined using a combination of phenotypic and genotypic properties. Strain S1510T presented phenotypic properties typical of members of the family Micromonosporaceae and was assigned to the Plantactinospora genus, based on the phylogenetic analyses of the 16S rRNA gene and whole-genome sequences. Low dDDH (digital DNA-DNA hybridization) values with other members of the genus confirmed that Plantactinospora sp. S1510T represents a novel species, and is proposed with the new name Plantactinospora alkalitolerans. The strain presented characteristics not previously described for other species in the genus, such as its high tolerance to alkaline pHs, the presence of genes related to the production and degradation of alkanes (oleABCD, ssuAD, almA), the degradation of several aromatic compounds, and the tolerance to high heavy metal concentrations. In addition, Plantactinospora sp. S1510T presents several bioclusters to produce nonribosomal peptide-synthetases, terpenes, polyketide synthases, and bacteriocins, that possess low similarities with known compounds.

Biological selenate and selenite reduction by waste activated sludge using hydrogen as electron donor

Biological reduction of selenium oxyanions is widely used for selenium removal from wastewater. The process is, however, limited by the availability of a suitable, efficient and low cost electron donor. In this study, selenite and selenate reduction by waste activated sludge using hydrogen as the electron donor was investigated. Both selenite and selenate (80 mg/L) were completely removed using H₂ within 8 days of incubation. In the presence of sulfate in the medium, the Se removal efficiency decreased to 77.8-95.4% (for selenite) and 88.2-99.4% (for selenate) at different temperatures and initial sulfate concentrations. Thermophilic conditions (50 °C) were better suited for both selenite and selenate reduction using H₂ as electron donor with a 0.8-13.5% increase in overall Se removal. Similarly, sulfate reduction also increased from 69.1- 88% at 30 °C to 72-94.6% at 50 °C. Most of the H₂ utilized was diverted towards Se and sulfate reduction with minimal production of byproducts such as methane (<0.32 mM) or volatile fatty acids (<0.92 mg/L). The elemental Se produced from selenite and selenate reduction ranged between 33.9 and 52.1 mg/L. The elemental selenium nanoparticles produced as a result of selenite and selenate reduction were characterized using transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX) and dynamic light scattering (DLS) spectroscopy. Furthermore, characterization of the biomass using Fourier-transform infrared spectroscopy (FTIR) and excitation emission matrix (EEM) spectra of the extracellular polymeric substances (EPS) produced by the waste activated sludge were performed to elucidate the mechanism of selenium oxyanion reduction to elemental selenium nanoparticles.

A Review of the Role of Extracellular Polymeric Substances (EPS) in Wastewater Treatment Systems

A review of the characterization and functions of extracellular polymeric substances (EPS) of microbial aggregates in biological wastewater treatment systems is presented in this paper. EPS represent the complex high-molecular-weight mixture of polymers excreted by microorganisms generated from cell lysis as well as adsorbed inorganic and organic matter from wastewater. EPS exhibit a three-dimensional, gel-like, highly hydrated matrix that facilitates microbial attachment, embedding, and immobilization. EPS play multiple roles in containments removal, and the main components of EPS crucially influence the properties of microbial aggregates, such as adsorption ability, stability, and formation capacity. Moreover, EPS are important to sludge bioflocculation, settleability, and dewatering properties and could be used as carbon and energy sources in wastewater treatment. However, due to the complex structure of EPS, related knowledge is incomplete, and further research is necessary to understand fully the precise roles in biological treatment processes.

Effects of Pb-, Cd-resistant bacterium Pantoea sp. on growth, heavy metal uptake and bacterial communities in oligotrophic growth substrates of Lolium multiflorum Lam

Phosphate-solubilizing bacteria (PSB) can accelerate phytoremediation, especially in those fertilized soils. However, PSB function in oligotrophic growth substrates remains poorly studied. In this study, we isolated lead (Pb)- and cadmium (Cd)-resistant PSB from contaminated sandy soil at an abandoned lubricant plant. The isolated Pantoea sp. PP4 (PP4 hereafter) can produce organic acid and IAA (Indole-3-acetic acid) and dissolve up to 238 mg/L of inorganic phosphate Ca2(PO4)3, exhibiting biosorption capability for Pb and bioprecipitation for Pb and Cd. In the sand pot experiment, inoculation of PP4 increased the accumulation of Pb and Cd in Lolium multiflorum Lam. by 28.9% and 95.5%, respectively, and increased the available phosphorous in oligotrophic river sand by 30.8% (P < 0.05). Meanwhile, the growth of Lolium multiflorum Lam. was also stimulated, resulting in 89.2%, 57.1%, 184.6%, and 28.5% increase in fresh weight, dry weight, root length, and shoot length, respectively. NMDS analysis showed that the bacterial communities in river sand were more clustered after inoculation with PP4. These results indicated that the application of Pantoea sp. PP4 can facilitate the phytoremediation of Pb and Cd in oligotrophic growth substrates, forming a convergent bacterial community. Our findings highlighted the importance of identifying ideal PSB to improve phytoremediation efficiency in oligotrophic environments.

Bioremediation of heavy metal-polluted environments by non-living cells from rhizobial isolates

Rhizosphere bacteria, for example, rhizobia, can play several roles, and one of the most important, the protection of plant roots against toxic conditions and other environmental stresses. In this work, the action of Cu²⁺ and Cr⁶⁺ on cell growth and EPS production of four strains of rhizobia, Rhizobium tropici (LBMP-C01), Ensifer sp. (LBMP-C02 and LBMP-C03), and Rhizobium sp. LBMP-C04, were tested. The results confirmed the strong effect of Cu²⁺ and Cr⁶⁺ on bacterial exopolysaccharides (EPS) synthesis, and how cells can adsorb these metals, which may be a key factor in the interactions between rhizosphere bacteria and host plants in heavy metal-contaminated soils. Here, we emphasize the importance of proving the potential of treating bacterial cells and their extracellular EPS to promote the bio-detoxification of terrestrial and aquatic systems contaminated by heavy metals in a highly sustainable, economic, and ecological way.

Biosynthesis of exopolysaccharide from waste molasses using Pantoea sp. BCCS 001 GH: a kinetic and optimization study

The bacterium Pantoea sp. BCCS 001 GH produces an exopolysaccharide (EPS) named Pantoan through using sugar beet molasses (SBM) as an inexpensive and widely available carbon source. This study aims to investigate the kinetics and optimization of the Pantoan biosynthesis using Pantoea sp. BCCS 001 GH in submerged culture. During kinetics studies, the logistic model and Luedeking-Piret equation are precisely fit with the obtained experimental data. The response surface methodology (RSM)-central composite design (CCD) method is applied to evaluate the effects of four factors (SBM, peptone, Na2HPO4, and Triton X-100) on the concentration of Pantoan in batch culture of Pantoea sp. BCCS 001 GH. The experimental and predicted maximum Pantoan production yields are found 9.9 ± 0.5 and 10.30 g/L, respectively, and the best prediction factor concentrations are achieved at 31.5 g/L SBM, 2.73 g/L peptone, 3 g/L Na2HPO4, and 0.32 g/L Triton X-100 after 48 h of submerged culture fermentation, at 30 °C. The functional groups and major monosaccharides (glucose and galactose) of a purified Pantoan are described and confirmed by 1HNMR and FTIR. The produced Pantoan is also characterized by thermogravimetric analysis and the rheological properties of the biopolymer are investigated. The present work guides the design and optimization of the Pantoea sp. BCCS 001 GH culture media, to be fine-tuned and applied to invaluable EPS, which can be applicable in food and biotechnology applications.

Interrelating EPS, soluble microbial products and metal solubility in a methanogenic consortium stressed by nickel and cobalt

The relationships between extracellular polymeric substances (EPS), soluble microbial product production, metal solubility, and methanogenic activity were investigated. The individual, and joint, toxic effects of nickel and cobalt on methanogenic consortia fed with glucose as model substrate were studied using biomethane potential assays. Cobalt was found to be less toxic to methanogens than nickel at each concentration tested, and the combined effects of Ni and Co on methane production in the bimetal experiment was higher than the sum of the effects of each metal alone. The protein content of EPS, and extracellular soluble protein fractions, decreased with increasing concentrations of total metals. Meanwhile, no significant change in response to metal stress was apparent for carbohydrate content of EPS or extracellular soluble carbohydrate. Decreasing protein content of EPS was accompanied by reduced methanogenic activity and an increase in the soluble metal fraction. The strong associations observed between these variables could be due to the critical role of EPS in protecting microbial cells against nickel and cobalt stress, possibly by capturing metal cations through their functional groups, thus reducing metal availability to the microbial cells in the methanogenic consortia underpinning the anaerobic digestion process.

Transporter drives the biosorption of heavy metals by Stenotrophomonas rhizophila JC1

To better understand the function of transporter in heavy metal detoxification of bacteria, the transporters associated with heavy metal detoxification in S. rhizophila JC1 were analyzed, among which four members were verified by RT-qPCR. In addition, the removal rates of four single metal ions (Cr⁶⁺, Cu²⁺, Zn²⁺, Pb²⁺) and polymetallic ions by strain JC1 were studied, respectively. We also researched the physiological response of strain JC1 to different metal stress via morphological observation, elemental composition, functional group and membrane permeability analysis. The results showed that in the single metal ion solution, removal capacities of Cu²⁺ (120 mg/L) and Cr⁶⁺ (80 mg/L) of S. rhizophila JC1 reached to 79.9% and 89.3%, respectively, while in polymetallic ions solution, the removal capacity of each metal ion all decreased, and in detail, the adsorption capacity was determined Cr⁶+>Cu²⁺>Zn²⁺>Pb²⁺ under the same condition. The physiological response analyses results showed that extracellular adsorption phenomena occurred, and the change of membrane permeability hindered the uptake of metal ions by bacteria. The analysis of transporters in strain JC1 genome illustrated that a total of 323 transporters were predicted. Among them, two, six and five proteins of the cation diffusion facilitator, resistance-nodulation-division efflux and P-type ATPase families were, respectively, predicted. The expression of corresponding genes showed that the synergistic action of correlative transporters played important roles in the process of adsorption. The comparative genomics analysis revealed that S. rhizophila JC1 has long-distance evolutionary relationships with other strains, but the efflux system of S. rhizophila JC1 contained the same types of metal transporters as other metal-resistant bacteria.

Bioremediation of PAHs and heavy metals co-contaminated soils: Challenges and enhancement strategies

Systemic studies on the bioremediation of co-contaminated PAHs and heavy metals are lacking, and this paper provides an in-depth review on the topic. The released sources and transport of co-contaminated PAHs and heavy metals, including their co-occurrence through formation of cation-π interactions and their adsorption in soil are examined. Moreover, it is investigated that co-contamination of PAHs and heavy metals can drive a synergistic positive influence on bioremediation through enhanced secretion of extracellular polymeric substances (EPSs), production of biosynthetic genes, organic acid and enzymatic proliferation. However, PAHs molecular structure, PAHs-heavy metals bioavailability and their interactive cytotoxic effects on microorganisms can exert a challenging influence on the bioremediation under co-contaminated conditions. The fluctuations in bioavailability for microorganisms are associated with soil properties, chemical coordinative interactions, and biological activities under the co-contaminated PAHs-heavy metals conditions. The interactive cytotoxicity caused by the emergence of co-contaminants includes microbial cell disruption, denaturation of DNA and protein structure, and deregulation of antioxidant biological molecules. Finally, this paper presents the emerging strategies to overcome the bioavailability problems and recommends the use of biostimulation and bioaugmentation along with the microbial immobilization for enhanced bioremediation of PAHs-heavy metals co-contaminated sites. Better knowledge of the bioremediation potential is imperative to improve the use of these approaches for the sustainable and cost-effective remediation of PAHs and heavy metals co-contamination in the near future.

Curvularia coatesiae XK8, a Potential Bioadsorbent Material for Adsorbing Cd(II) and Sb(III) Compound Pollution: Characteristics and Effects

Soil heavy metal pollution is a common problem in mining areas. The soil of the Xikuangshan located in Lengshuijiang, Hunan Province, China contains various excessive heavy metals, especially antimony and cadmium. Previous studies have shown that heavy metal-tolerant microorganisms screened from mining areas have the potential to adsorb heavy metals. In this study, we screened out a cadmium and antimony tolerant fungus named XK8 from the slags collected from the Xikuangshan. Then, we explored the single and binary biosorption characteristics of Cd(II) and Sb(III) on it. In our results, the fungus XK8 was identified as Curvularia coatesiae XK8 by ITS sequencing analysis. Under the optimal conditions, in binary biosorption of the XK8, the main effect of the initial cadmium concentration on the cadmium removal rate of XK8 is negative, while the main effect of the initial antimony concentration, biosorption time, and initial pH on the cadmium removal rate of XK8 is positive. The initial pH has the greatest impact on the biosorption of cadmium on XK8, followed by the biosorption time; moreover, the effects of both are stronger than the coexisting ions. SAS analysis shows that under the optimal conditions, the theoretical maximum cadmium removal rate of XK8 is 100%, and the actual removal rate is 67.57%. Compared to the single biosorption with binary biosorption, the maximum biosorption capacity of XK8 for cadmium in the composite biosorption system increased to 23.6 mg g^–1. It shows that under the background of high antimony, Sb(III) has a promoting effect on the biosorption of Cd(II) on XK8. In summary, a cadmium and antimony tolerant fungus with strong cadmium biosorption ability under the background of high antimony was screened out. It provides a potential microbial material for the bioremediation of heavy metal pollution.

Contributions of polysaccharides to arsenate resistance in Chlamydomonas reinhardtii

Polysaccharides supply energy for various metabolic processes in cells. However, their roles in the arsenate (As(V)) resistance in microalgae remain largely unknown. Here, we explored the synthesis and transformation of polysaccharides in Chlamydomonas reinhardtii upon various levels of As(V) stress, using a number of physiological indexes along with transmission electron microscopic (TEM) and proteomic analyses. When exposed to low concentration of As(V) (0-20 μg/L), C. reinhardtii accumulated starch and produced more extracellular polysaccharides. At 50 μg/L As(V) treatment, starch accumulation gradually shifted to polysaccharides decomposition in the algal cells. Under higher As(V) concentration (500 μg/L), significantly more proteins in fatty acid metabolic pathway were differentially expressed, indicating that cells redirected carbon flux and transformed lipids into polysaccharides. The findings of this study demonstrate that polysaccharides may be critically involved in the As(V) resistance of C. reinhardtii.

Bacterial adaptive strategies to cope with metal toxicity in the contaminated environment - A review

Heavy metal contamination poses a serious environmental hazard, globally necessitating intricate attention. Heavy metals can cause deleterious health hazards to humans and other living organisms even at low concentrations. Environmental biotechnologists and eco-toxicologists have rigorously assessed a plethora of bioremediation mechanisms that can hamper the toxic outcomes and the molecular basis for rejuvenating the hazardous impacts, optimistically. Environmental impact assessment and restoration of native and positive scenario has compelled biological management in ensuring safety replenishment in polluted realms often hindered by heavy metal toxicity. Copious treatment modalities have been corroborated to mitigate the detrimental effects to remove heavy metals from polluted sites. In particular, Biological-based treatment methods are of great attention in the metal removal sector due to their high efficiency at low metal concentrations, ecofriendly nature, and cost-effectiveness. Due to rapid multiplication and growth rates, bacteria having metal resistance are advocated for metal removal applications. Evolutionary implications of coping with heavy metals toxicity have redressed bacterial adaptive/resistance strategies related to physiological and cross-protective mechanisms. Ample reviews have been reported for the bacterial adaptive strategies to cope with heavy metal toxicity. Nevertheless, a holistic review summarizing the redox reactions that address the cross-reactivity mechanisms between metallothionein synthesis, extracellular polysaccharides production, siderophore production, and efflux systems of metal resistant bacteria are scarce. Molecular dissection of how bacteria adapt themselves to metal toxicity can augment novel and innovative technologies for efficient detoxification, removal, and combat the restorative difficulties for stress alleviations. The present comprehensive compilation addresses the identification of newer methodologies, summarizing the prevailing strategies of adaptive/resistance mechanisms in bacterial bioremediation. Further pitfalls and respective future directions are enumerated in invigorating effective bioremediation technologies including overexpression studies and delivery systems. The analysis will aid in abridging the gap for limitations in heavy metal removal strategies and necessary cross-talk in elucidating the complex cascade of events in better bioremediation protocols.

Assessing effects of Ca2+ addition on membrane bioreactor performance and macro-floc sludge characteristics

Calcium ions (Ca²⁺) can trigger coagulation-flocculation process to form macro-flocculated sludge (MFS). Thus, dosing Ca²⁺-containing reagents into membrane bioreactors (MBRs) is considered as a promising approach to mitigate membrane biofouling. However, a mechanistic understanding of Ca²⁺ addition to MBR performance remains elucidated, such as physicochemical characteristics of MFS and their functionality variations. Consequently, this study was sought to understand the interplays of Ca²⁺ addition and MBR performance with a focus on characterizing MFS in detail. Three parallel MBRs were amended with 82, 208 and 410 mg-Ca²⁺/L final concentrations. Particle size analyses revealed that MFS formation was overall enhanced by the Ca²⁺ addition and granular sludge with diameters of up to 900 μm was formed in the 410 mg-Ca²⁺/L scenario. We believed that cationic bridges facilitated by elevated Ca²⁺ concentrations in conjunction with coagulation-flocculation were primary mechanisms of the formation of large flocs. Moreover, significant portions of soluble proteins and polysaccharides were flocculated and precipitated by Ca²⁺, which demonstrated a negative correlation between extracellular polymeric substances (EPS) concentrations and the formation of MFS. Furthermore, the population abundancies of Thiotrichaceae, Sphingomonadales and Hyphomicrobiaceae decreased in the sludge with Ca²⁺ addition resulted in profound changes of the microbial communities in the MBRs. But MBR performance, such as chemical oxygen demand removal (over 90%), showed no variation during the MBR operation. On the contrary, total nitrogen removal was inhibited in the MBRs. It was because the enlarging MFS formed diffusion barriers to prevent organic component from entering into the sludge flocs to be consumed.

Light Irradiation Coupled with Exogenous Metal Ions to Enhance Exopolysaccharide Synthesis from Agaricus sinodeliciosus ZJU-TP-08 in Liquid Fermentation

To promote Agaricus sinodeliciosus var. Chaidam ZJU-TP-08 growth and metabolites accumulation, a novel integrated strategy was developed by adopting high levels of metal ions coupled with light treatment. The results revealed that yellow and blue light could significantly promote biomass and exopolysaccharides production, respectively. Furthermore, the yellow–blue light shift strategy could stimulate exopolysaccharides formation. Ca²⁺ ions coupled with blue light mostly promoted exopolysaccharides production related to oxidative stress, which was 42.00% and 58.26% higher than that of Ca²⁺ ions coupled with the non-light and dark cultivation without Ca²⁺ ions in 5-L bioreactor. RNA-seq was performed to uncover the underlined molecular mechanism regulated by light-induced gene expressions in exopolysaccharides biosynthesis and oxidative stress. The findings of this work provide valuable insights into adopting metal ions coupled with the light-assisted method for the macrofungus submerged fermentation for exopolysaccharides production.

Cadmium stress triggers significant metabolic reprogramming in Enterococcus faecium CX 2-6

•

A cadmium resistant strain of Enterococcus faecium CX 2–6 is sequenced.

•

Differential expression analysis found 47% of CX 2–6 genes are significantly affected by Cd treatment.

•

Differentially expressed genes (DEGs) form physically linked gene clusters in the CX 2–6 genome.

•

A prophage is unique to CX 2–6 and is strongly activated by high Cd concentration.

•

A majority of DEGs responding to Cd treatment are present in the core genome.

Heavy metal pollutions in the soils are increasingly threatening the global crop and food production. Using plant associated bacteria to remediate heavy metal contamination is a promising approach. We have isolated a cadmium (Cd) resistant Enterococcus faecium strain CX 2–6 from a heavy metal contaminated farmland. We have shown that: (i) CX 2–6 can tolerate cadmium (Cd) with a slower growth rate; (ii) The CX 2–6 complete genome is fully assembled using PacBio long reads; (iii) Differential expression analysis found 47% of CX 2–6 genes are significantly affected by Cd treatment and form three gene groups with distinct expression profiles; (iv) Differentially expressed genes (DEGs) form physically linked gene clusters in the CX 2–6 genome, and one of the gene clusters corresponds to a prophage that is unique to CX 2–6 and is strongly activated when Cd concentration is higher; (v) A majority of DEGs responding to Cd treatment are present in the core genome; and (vi) 55 noncoding RNA genes are identified and 49 of them are DEGs responding to cadmium stress. Our pan-genome analysis and comparative RNA-seq data analysis has significantly improved our understanding of the metabolic reprogramming of E. faecium CX 2–6 under Cd stress.

Simultaneous removal of lead and selenium through biomineralization as lead selenide by anaerobic granular sludge

This study demonstrated the simultaneous removal of lead (Pb) and selenium (Se) as lead selenide biomineralization using anaerobic granular sludge. The microbial community of the granular sludge was first enriched for 140 days in the presence of Pb(II) only, selenate and selenite only, Pb(II)+selenate, and Pb(II)+selenite. In the absence of Se, removal of Pb(II) mainly occurred via biosorption and deposited on the biomass as lead oxide and lead carbonate. The Pb removal efficiency (94% of initial 50 mg L^-1) was reduced to 90% and 86% in the presence of selenate and selenite, respectively, due to biosorption. Addition of Pb(II) didn't exert any toxic effect on the Se-reducing microbial community, on the contrary: Pb(II) addition improved the Se removal efficiency for selenate from 85% to 90%, but did not affect selenite removal after 14 d of incubation. The bioreduction of the Se-oxyanions produced elemental Se (Se(0)) and selenide, which later interacted with Pb(II) to produce lead selenide (PbSe). Adsorption of Pb(II) onto the Se(0) nanoparticles and precipitation as the Se(0)-Pb complex might also have contributed to the simultaneous removal of Pb and Se. XPS and XRD analysis further confirmed the immobilization of Pb as PbSe, PbO and PbCO₃ in the biomass.

Insight into biosorption of heavy metals by extracellular polymer substances and the improvement of the efficacy: a review

Heavy metals are continuously released into aquatic environments in which they accumulate. This phenomenon endangers public health because heavy metals accumulate along the food chain. However, conventional remediation methods are inefficient, expensive and yield toxic intermediate products, which adversely affect the environment. The discovery of green bio-adsorbents such as microbial extracellular polymer substance (EPS) has quickly attracted considerable worldwide attention because of their low cost, high removal efficiency of heavy metals and industrial availability. Hence, this review considers the sources, hazards and treatment methods of heavy metals pollution, particularly the biosorption mechanism of EPS to heavy metals and the influencing factors of the bio-adsorption process, which are significant in the efficient removal of heavy metals-containing wastewater treatment. This review also focuses on strengthening the process of EPS adsorption of heavy metals, which can further contribute to heavy metals removal. Finally, it has been proposed that improving the yield, stability, selectivity and recoverability of EPS is the key direction of further research.

Magnetic properties of biogenic selenium nanomaterials

Bioreduction of selenium oxyanions to elemental selenium is ubiquitous; elucidating the properties of this biogenic elemental selenium (BioSe) is thus important to understand its environmental fate. In this study, the magnetic properties of biogenic elemental selenium nanospheres (BioSe-Nanospheres) and nanorods (BioSe-Nanorods) obtained via the reduction of selenium(IV) using anaerobic granular sludge taken from an upflow anaerobic sludge blanket (UASB) reactor treating paper and pulp wastewater were investigated. The study indicated that the BioSe nanomaterials have a strong paramagnetic contribution with some ferromagnetic component due to the incorporation of Fe(III) (high-spin and low-spin species) as indicated by electron paramagnetic resonance (EPR). The paramagnetism did not saturate up to 50,000 Oe at 5 K, and the hysteresis curve showed the coercivity of 100 Oe and magnetic moment saturation around 10 emu. X-ray photoelectron spectroscopy (XPS) and EPR evidenced the presence of Fe(III) in the nanomaterial. Signals for Fe(II) were observed neither in EPR nor in XPS ruling out its presence in the BioSe nanoparticles. Fe(III) being abundantly present in the sludge likely got entrapped in the extracellular polymeric substances (EPS) coating the biogenic nanomaterials. The presence of Fe(III) in BioSe nanomaterial increases the mobility of Fe(III) and may have an effect on phytoplankton growth in the environment. Furthermore, as supported by the literature, there is a potential to exploit the magnetic properties of BioSe nanomaterials in drug delivery systems as well as in space refrigeration.