Therapeutic "Tool" in Reconstruction and Regeneration of Tissue Engineering for Osteochondral Repair

Electromagnetic field-mediated chitosan/gelatin/nano-hydroxyapatite and bone-derived scaffolds regulate the osteoblastic and chondrogenic phenotypes of adipose-derived stem cells to construct osteochondral tissue engineering niche in vitro

It is critical to explore the effects of electromagnetic field (EMF) on the construction of functional osteochondral tissue, which has shown certain clinical significance for the treatment of osteochondral injury. At present, there are few studies on the effect of the direction of EMF on cells. This study aimed to investigate the effects of EMF coupling on different parameters to control adipose-derived stem cells (ADSCs) proliferation and specific chondrogenic and osteogenic differentiation at 2D level and 3D level. The proliferation and differentiation of EMF-induced ADSCs are jointly regulated by EMF and space structure. In this study, Cs7/Gel3/nHAP scaffolds were prepared with good degradation rate (86.75 ± 4.96 %) and absorb water (1100 %), and the pore size was 195.63 ± 54.72 μm. The bone-derived scaffold with a pore size of 267.17 ± 129.18 μm was obtained and its main component was hydroxyapatite. Cs7/Gel3/nHAP scaffolds and bone-derived scaffolds are suitable as 3D level materials. The optimal EMF intensity was 2 mT for chondrogenic differentiation and proliferation and 1 mT for osteogenic differentiation and proliferation. It is noteworthy that EMF has a negative correlation with ADSCs proliferation in the vertical direction at 2D level, while it has a positive correlation with ADSCs proliferation at 3D level. EMF mediated 3D osteochondral scaffold provide good strategy for osteochondral tissue engineering construction.

Multilayer functional bionic fabricated polycaprolactone based fibrous membranes for osteochondral integrated repair

Osteochondral defect repair is one of the challenging problems in orthopedics. In this study, a multilayer polycaprolactone (PCL) based fibrous membrane for osteochondral defect repair was biomimetically fabricated by combining self-induced crystallization, biomimetic mineralization and layer-by-layer electrospinning techniques. The multilayer functional bionic fibrous membrane consisted of cartilage repair layer, intermediate transition repair layer and subchondral bone repair layer. Glucosamine hydrochloride (GAH) encapsulated in core-shell structured PCL fibrous membrane (MGPCL) was suitable for cartilage repair. Shish-kebab (SK) structured PCL fibrous membrane with calcium phosphate coating (MSKPCL) was designed for subchondral bone repair. SK structured MGPCL fibrous membrane (SKMGPCL) was used as intermediate transition repair. The tensile modulus of MG/SKMG/MSKPCL fibrous membrane was 34.24 ± 2.39 MPa which met the requirements of cartilage and subchondral bone repair scaffolds, and in vitro culture results showed that MG/SKMG/MSKPCL fibrous membrane had good biological activity and osteogenic ability. These results showed that MG/SKMG/MSKPCL fibrous membrane provides a promising material basis for osteochondral integrated repair scaffold.

Biomimetic Bilayered Scaffolds for Tissue Engineering: From Current Design Strategies to Medical Applications

Tissue damage due to cancer, congenital anomalies, and injuries needs new efficient treatments that allow tissue regeneration. In this context, tissue engineering shows a great potential to restore the native architecture and function of damaged tissues, by combining cells with specific scaffolds. Scaffolds made of natural and/or synthetic polymers and sometimes ceramics play a key role in guiding cell growth and formation of the new tissues. Monolayered scaffolds, which consist of uniform material structure, are reported as not being sufficient to mimic complex biological environment of the tissues. Osteochondral, cutaneous, vascular, and many other tissues all have multilayered structures, therefore multilayered scaffolds seem more advantageous to regenerate these tissues. In this review, recent advances in bilayered scaffolds design applied to regeneration of vascular, bone, cartilage, skin, periodontal, urinary bladder, and tracheal tissues are focused on. After a short introduction on tissue anatomy, composition and fabrication techniques of bilayered scaffolds are explained. Then, experimental results obtained in vitro and in vivo are described, and their limitations are given. Finally, difficulties in scaling up production of bilayer scaffolds and reaching the stage of clinical studies are discussed when multiple scaffold components are used.

Design and bioprinting for tissue interfaces

Tissue interfaces include complex gradient structures formed by transitioning of biochemical and mechanical properties in micro-scale. This characteristic allows the communication and synchronistic functioning of two adjacent but distinct tissues. It is particularly challenging to restore the function of these complex structures by transplantation of scaffolds exclusively produced by conventional tissue engineering methods. Three-dimensional (3D) bioprinting technology has opened an unprecedented approach for precise and graded patterning of chemical, biological and mechanical cues in a single construct mimicking natural tissue interfaces. This paper reviews and highlights biochemical and biomechanical design for 3D bioprinting of various tissue interfaces, including cartilage-bone, muscle-tendon, tendon/ligament-bone, skin, and neuro-vascular/muscular interfaces. Future directions and translational challenges are also provided at the end of the paper.

A 3D multifunctional bi-layer scaffold to regulate stem cell behaviors and promote osteochondral regeneration

Osteochondral defect (OCD) regeneration remains a great challenge. Recently, multilayer scaffold simulating native osteochondral structures have aroused broad interest in osteochondral tissue engineering. Here, we developed a 3D multifunctional bi-layer scaffold composed of a kartogenin (KGN)-loaded GelMA hydrogel (GelMA/KGN) as an upper layer mimicking a cartilage-specific extracellular matrix and a hydroxyapatite (HA)-coated 3D printed polycaprolactone porous scaffold (PCL/HA) as a lower layer simulating subchondral bone. The bi-layer scaffolds were subsequently modified with tannic acid (TA) prime-coating and E7 peptide conjugation (PCL/HA-GelMA/KGN@TA/E7) to regulate endogenous stem cell behaviors and exert antioxidant activity for enhanced osteochondral regeneration. In vitro, the scaffolds could support cell attachment and proliferation, and enhance the chondrogenic and osteogenic differentiation capacity of bone marrow-derived mesenchymal stem cells (BMSCs) in a specific layer. Besides, the incorporation of TA/E7 significantly increased the biological activity of the bi-layer scaffolds including the pro-migratory effect, antioxidant activity, and the maintenance of cell viability against oxidative stress. In vivo, the developed bi-layer scaffolds enhanced the simultaneous regeneration of cartilage and subchondral bone when implanted into a rabbit OCD model through macroscopic, micro-CT, and histological evaluation. Taken together, these investigations demonstrated that the 3D multifunctional bi-layer scaffolds could provide a suitable microenvironment for endogenous stem cells, and promote in situ osteochondral regeneration, showing great potential for the clinical treatment of OCD.

Fabrication and detection of a novel hybrid conductive scaffold based on alginate/gelatin/carboxylated carbon nanotubes (Alg/Gel/mMWCNTs) for neural tissue engineering

Carbon nanotubes (CNTs), as kinds of conductive carbon nanomaterials, were widely applied in neural tissue engineering due to their excellent electrical conductivity and good biocompatibility. In this study, the carboxyl-modified multi-walled carbon nanotubes (mMWCNTs) were introduced into sodium alginate/gelatin (Alg/Gel) scaffolds to optimize the function of the hybrid scaffolds. The Alg/Gel/mMWCNTs conductive scaffolds with mMWCNTs content of 1%, 3%, and 5% were prepared by freeze-drying, respectively. Following this, the physicochemical properties and biocompatibility of the hybrid scaffolds at different magnetic field intensities were evaluated. The conductive scaffolds were characterized by Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). In general, the mMWCNTs addition improved the hydrophilic, electrical conductivity and mechanical properties of the composite scaffold, and PC12 cells showed a trend of gradual increase over culture time. Particularly, the Alg/Gel-1%C scaffold exhibited the best cell proliferation behavior. Briefly, the surface contact angle decreased from 74 ± 1° to 60 ± 3°, the electrical conductivity and compressive modulus increased to 1.32 × 10^-3 ± 2.1 × 10^-4 S/cm and 1.40 ± 0.076 Mpa, the G1 phase from 55.67 ± 1.86% to 59.77 ± 0.94% and the G2 phase from 10.32 ± 0.35% to 13.93 ± 1.26%，respectively. In the SEM images, PC12 cells were well-shaped and densely distributed. Therefore, the Alg/Gel/mMWCNTs conductive scaffold has potential as a tissue engineering scaffold in nerve regeneration.

Preparation and evaluation of stingray skin collagen/oyster osteoinductive composite scaffolds

The regeneration of bone defects is a major challenge for clinical orthopaedics. Herein, we designed and prepared a new type of bioactive material, using stingray skin collagen and oyster shell powder (OSP) as raw materials. A stingray skin collagen/oyster osteoinductive composite scaffold (Col-OSP) was prepared for the first time by genipin cross-linking, pore-forming and freeze-drying methods. These scaffolds were characterized by ATR-FTIR, SEM, compression, swelling, cell proliferation, cell adhesion, alkaline phosphatase activity, alizarin red staining and RT-PCR etc. The Col-OSP scaffold had an interconnected three-dimensional porous structure, and the mechanical properties of the Col-OSP composite scaffold were enhanced compared with Col, combining with the appropriate swelling rate and degradation rate, the scaffold was more in line with the requirements of bone tissue engineering scaffolds. The Col-OSP scaffold was non-toxic, promoted the proliferation, adhesion, and differentiation of MC3T3-E1 cells, and stimulated the osteogenesis-related genes expressions of osteocalcin (OCN), collagen type I (COL-I) and RUNX2 of MC3T3-E1 cells.

The effect of decellularized cartilage matrix scaffolds combined with endometrial stem cell-derived osteocytes on osteochondral tissue engineering in rats

Since decellularized tissues may offer the instructive niche for cell differentiation and function, their use as cell culture scaffolds is a promising approach for regenerative medicine. To repair osteochondral tissues, developing a scaffold with biomimetic structural, compositional, and functional characteristics is vital. As a result of their heterogeneous structure, decellularized articular cartilage matrix from allogeneic and xenogeneic sources are considered appropriate scaffolds for cartilage regeneration. We developed a scaffold for osteochondral tissue engineering by decellularizing sheep knee cartilage using a chemical technique. DNA content measurements and histological examinations revealed that this protocol completely removed cells from decellularized cartilage. Furthermore, SEM, MTS assay, and H&E staining revealed that human endometrial stem cells could readily adhere to the decellularized cartilage, and the scaffold was biocompatible for their proliferation. Besides, we discovered that decellularized scaffolds could promote EnSC osteogenic differentiation by increasing bone-specific gene expression. Further, it was found that decellularized scaffolds were inductive for chondrogenic differentiation of stem cells, evidenced by an up-regulation in the expression of the cartilage-specific gene. Also, in vivo study showed the high affinity of acellularized scaffolds for cell adhesion and proliferation led to an improved regeneration of articular lesions in rats after 4 weeks. Finally, a perfect scaffold with high fidelity is provided by the developed decellularized cartilage scaffold for the functional reconstruction of osteochondral tissues; these types of scaffolds are helpful in studying how the tissue microenvironment supports osteocytes and chondrocytes differentiation, growth, and function to have a good osteochondral repair effect.

Preparation and characterization of biomimetic gradient multi-layer cell-laden scaffolds for osteochondral integrated repair

A cell-laden tissue engineering scaffold for osteochondral integrated repair is one of the ideal strategies for osteochondral lesions. In this study, we fabricated cell-laden porous hydrogel scaffolds with gradient nano-hydroxyapatite using methacrylic anhydride gelatin (GelMA), nano-hydroxyapatite (nHA), and polyethylene oxide (PEO) solution for osteochondral tissue regeneration. The scaffold possessed interconnected pores and a nano-hydroxyapatite gradient in the vertical direction. The chemical, physical, mechanical, and biological properties of the hydrogel solutions and scaffolds were characterized. In vitro experiments confirmed that cells were distributed homogeneously and that different pore structures could affect the proliferation and differentiation of BMSCs. The Nonporous hydrogel was beneficial for the chondrogenic differentiation of BMSCs and interconnected pores were conducive to BMSC proliferation and osteogenic differentiation. The osteochondral integrative repair capacity of the scaffold was assessed by implanting the scaffolds into the intercondylar defect of the rabbit femur. By constructing pore structures in different layers, the cells in different layers of the hydrogels were in an intrinsic environment for survival and differentiation. Animal experiments confirmed that tissue engineering scaffolds for osteochondral lesions require different pore structures in different layers, and gradient structure facilitated integrated repair.

A Biomimetic Biphasic Scaffold Consisting of Decellularized Cartilage and Decalcified Bone Matrixes for Osteochondral Defect Repair

It is challenging to develop a biphasic scaffold with biomimetic compositional, structural, and functional properties to achieve concomitant repair of both superficial cartilage and subchondral bone in osteochondral defects (OCDs). This study developed a biomimsubchondraletic biphasic scaffold for OCD repair via an iterative layered lyophilization technique that controlled the composition, substrate stiffness, and pore size in each phase of the scaffold. The biphasic scaffold consisted of a superficial decellularized cartilage matrix (DCM) and underlying decalcified bone matrix (DBM) with distinct but seamlessly integrated phases that mimicked the composition and structure of osteochondral tissue, in which the DCM phase had relative low stiffness and small pores (approximately 134 μm) and the DBM phase had relative higher stiffness and larger pores (approximately 336 μm). In vitro results indicated that the biphasic scaffold was biocompatible for bone morrow stem cells (BMSCs) adhesion and proliferation, and the superficial DCM phase promoted chondrogenic differentiation of BMSCs, as indicated by the up-regulation of cartilage-specific gene expression (ACAN, Collagen II, and SOX9) and sGAG secretion; whereas the DBM phase was inducive for osteogenic differentiation of BMSCs, as indicated by the up-regulation of bone-specific gene expression (Collagen I, OCN, and RUNX2) and ALP deposition. Furthermore, compared with the untreated control group, the biphasic scaffold significantly enhanced concomitant repair of superficial cartilage and underlying subchondral bone in a rabbit OCD model, as evidenced by the ICRS macroscopic and O’Driscoll histological assessments. Our results demonstrate that the biomimetic biphasic scaffold has a good osteochondral repair effect.

Nanotextured silk fibroin/hydroxyapatite biomimetic bilayer tough structure regulated osteogenic/chondrogenic differentiation of mesenchymal stem cells for osteochondral repair

OBJECTIVES

Articular cartilage plays a vital role in bearing and buffering. Injured cartilage and subchondral bone repair is a crucial challenge in cartilage tissue engineering due to the peculiar structure of osteochondral unit and the requirement of osteogenic/chondrogenic bi-directional differentiation. Based on the bionics principle, a nanotextured silk fibroin (SF)-chondroitin sulphate (CS)/hydroxyapatite (HAp) nanowire tough bilayer structure was prepared for osteochondral repair.

METHODS

The SF-CS/HAp membrane was constructed by alcohol-induced β-sheet formation serving as the physical crosslink. Its osteochondral repairing capacity was evaluated by culturing bone marrow mesenchymal stem cells (BMSCs) in vitro and constructing a rat osteochondral defect model in vivo.

RESULTS

The bilayer SF-CS/HAp membrane with satisfactory mechanical properties similar to natural cartilage imitated the natural osteochondral unit structural layers and exerted the function of bearing and buffering timely after in vivo implantation. SF-CS layer upregulated the expression of chondrogenesis-related genes of BMSCs by surface nanotopography and sustained release CS. Meanwhile, nanotextured HAp layer assembled with nanowire endowed the membrane with an osteogenic differentiation tendency for BMSCs. In vivo results proved that the biomimetic bilayer structure dramatically promoted new cartilage formation and subchondral bone remodelling for osteochondral defect model after implantation.

CONCLUSIONS

The SF-CS/HAp biomimetic bilayer membrane provides a promising strategy for precise osteochondral repair.

Advances and prospects in biomimetic multilayered scaffolds for articular cartilage regeneration

Due to the sophisticated hierarchical structure and limited reparability of articular cartilage (AC), the ideal regeneration of AC defects has been a major challenge in the field of regenerative medicine. As defects progress, they often extend from the cartilage layer to the subchondral bone and ultimately lead to osteoarthritis. Tissue engineering techniques bring new hope for AC regeneration. To meet the regenerative requirements of the heterogeneous and layered structure of native AC tissue, a substantial number of multilayered biomimetic scaffolds have been studied. Ideal multilayered scaffolds should generate zone-specific functional tissue similar to native AC tissue. This review focuses on the current status of multilayered scaffolds developed for AC defect repair, including design strategies based on the degree of defect severity and the zone-specific characteristics of AC tissue, the selection and composition of biomaterials, and techniques for design and manufacturing. The challenges and future perspectives of biomimetic multilayered scaffold strategies for AC regeneration are also discussed.

Co-evolution of β-glucosidase activity and product tolerance for increasing cellulosic ethanol yield

β-Glucosidase (BGL) plays a key role in cellulose hydrolysis. However, it is still a great challenge to enhance product tolerance and enzyme activity of BGL simultaneously. Here, we utilized one round error-prone PCR to engineer the Penicillium oxalicum 16 BGL (16BGL) for improving the cellulosic ethanol yield. We identified a new variant (L-6C), a triple mutant (M280T/V484L/D589E), with enhanced catalytic efficiency ([Formula: see text]) for hydrolyzing pNPG and reduced strength of inhibition ([Formula: see text]) by glucose. To be specific, L-6C achieved a [Formula: see text] of 0.35 at a glucose concentration of 20 mM, which was 3.63 times lower than that attained by 16BGL. The catalytic efficiency for L-6C to hydrolyze pNPG was determined to be 983.68 mM^-1 s^-1, which was 22% higher than that for 16BGL. However, experiments showed that L-6C had reduced binding affinity (2.88 mM) to pNGP compared with 16BGL (1.69 mM). L-6C produced 6.15 g/L ethanol whose yield increased by about 10% than 16BGL. We performed molecular docking and molecular dynamics (MD) simulation, and binding free energy calculation using the Molecular Mechanics/Poisson Boltzmann surface area (MM/PBSA) method. MD simulation together with the MM/PBSA calculation suggested that L-6C had reduced binding free energy to pNPG, which was consistent with the experimental data.