Boron Nano-hydroxyapatite Composite Increases the Bone Regeneration of Ovariectomized Rabbit Femurs

In vivo bone regeneration performance of hydroxypropyl methylcellulose hydrogel-based composite bone cements in ovariectomized and ovary-intact rats: a preliminary investigation

The objective of this study is to fabricate and develop hydroxypropyl methylcellulose (HPMC) hydrogel (HG)-based composite bone cements with incorporation of hydroxyapatite (HA), beta-tricalcium phosphate (β-TCP), and with/without polymethylmethacrylate (PMMA) for vertebroplasty. For animal study, twenty female Wister rats (250-300 g, 12 weeks of age) were divided into four groups including a two non-ovariectomy (NOVX) groups and two ovariectomy (OVX)-induced osteoporosis groups. Two prepared biocomposites including HG/β-TCP/HA and HG/β-TCP/HA/PMMA were injected into the tibial defects of both OVX and NOVX rats for evaluating in vivo osteogenesis after 12 weeks. Micro-computed tomography and histological analysis using hematoxylin and eosin (H&E) and Masson's trichrome stains of the two composite cements implanted into the tibial defects of OVX and NOVX rats revealed enhanced bone regeneration potential. However, no statistically significant differences were noted among the groups based on new bone formation, demonstrating that the injected composite cements showed similar osteogenesis effects in both OVX and NOVX rats. These findings suggest that the newly developed composite bone cement composed of HG, β-TCP, HA and/or PMMA may be a promising and professional tool for treating osteoporotic and non-osteoporotic vertebral fractures.

B-doped nano-hydroxyapatite facilitates proliferation and differentiation of osteoblasts

PURPOSE

We aimed to explore the mechanism by which Boron-doped nano-hydroxyapatite (B-nHAp) facilitates the proliferation and differentiation of osteoblasts through controlled release of B.

METHODS

B-nHAp characterization was accomplished by means of X-ray diffraction, scanning electron microscopy, inductively coupled plasma mass spectrometry, and transmission electron microscopy. Human bone marrow mesenchymal stem cells (hBMSCs) were subjected to flow cytometry, alizarin red S staining, and cell counting kit-8 assay for proliferation and differentiation determination. Western blotting for protein expression detection together with real-time quantitative polymerase chain reaction for mRNA expression measurement were carried out on those related to hBMSC proliferation and differentiation. Immunofluorescence staining was conducted to determine the activity of the Wnt/β-catenin signaling pathway.

RESULTS

B-nHAp particles had structured configuration and uniform size, and a typical nHAp crystal structure. The B content in B-nHAp was in line with expectation. hBMSCs displayed stemness. B-nHAp significantly facilitated the proliferation of hBMSCs, and significantly more mineralized nodules formed in the B-nHAp group. B-nHAp significantly upregulated the expressions of marker molecules related to hBMSC proliferation and differentiation. B-nHAp boosted the activity of the Wnt/β-catenin signaling pathway.

CONCLUSION

B-nHAp modulates the Wnt/β-catenin signaling pathway to significantly enhance the proliferative and differential abilities of osteoblasts, potentially as an efficient material for bone repair.

Design and in vitro evaluation of 223Ra/99mTc-loaded spherical nano-hydroxyapatite in bone tumor therapy

Aim: Nano-hydroxyapatite (nHA) is a good nanocarrier to load 223Ra, but the low specific activity (sp.act.) of 223Ra@nHA limits its application in medicine. Methods: We proposed a method for preparing nHA using PEG as a template, which significantly increases the sp.act of 223Ra@nHA and a new method to loaded 99mTc for in vivo tracking. Results: The nHA synthesized using PEG as a template was associated with higher sp.act for 223Ra in comparison to nHA with identical particle size and without PEG. The nHA load 99mTc-MDP was associated with higher labeling rate and stability in comparison to 99mTc. Conclusion: All these findings suggest that using PEG as a template and 99mTc-MDP could be the most effective of synthetic 223Ra/99mTc@nHA.

Bioactive ceramic-based materials: beneficial properties and potential applications in dental repair and regeneration

Bioactive ceramics, primarily consisting of bioactive glasses, glass-ceramics, calcium orthophosphate ceramics, calcium silicate ceramics and calcium carbonate ceramics, have received great attention in the past decades given their biocompatible nature and excellent bioactivity in stimulating cell proliferation, differentiation and tissue regeneration. Recent studies have tried to combine bioactive ceramics with bioactive ions, polymers, bioactive proteins and other chemicals to improve their mechanical and biological properties, thus rendering them more valid in tissue engineering scaffolds. This review presents the beneficial properties and potential applications of bioactive ceramic-based materials in dentistry, particularly in the repair and regeneration of dental hard tissue, pulp-dentin complex, periodontal tissue and bone tissue. Moreover, greater insights into the mechanisms of bioactive ceramics and the development of ceramic-based materials are provided.

Development of Gelatin Methacryloyl/Sodium Alginate Interpenetrating Polymer Network Hydrogels for Bone Regeneration by Activating the Wnt/β-Catenin Signaling Pathway via Lithium Release

Hydrogels have gained significant attention as biomaterials due to their remarkable properties resembling those of the extracellular matrix (ECM). In the present investigation, we successfully synthesized interpenetrating polymer network (IPN) hydrogels using gelatin methacryloyl (GelMA) and sodium alginate (SA), incorporating various concentrations of lithium chloride (LiCl; 0, 5, and 10 mM), aiming to develop a hydrogel scaffold for bone regeneration. Notably, the compressive modulus of the IPN hydrogels remained largely unaffected upon the inclusion of LiCl. However, the hydrogel with the high concentration of LiCl exhibited reduced fragmentation after compression testing. Intriguingly, we observed a significant improvement in cellular biocompatibility, primarily attributed to activation of the Wnt/β-catenin signaling pathway induced by LiCl. Subsequently, we evaluated the efficacy of the newly developed IPN-Li hydrogels in a rat cranial defect model and found that they substantially enhanced bone regeneration. Nevertheless, it is important to note that the introduction of high concentrations of LiCl did not significantly promote osteogenesis. This outcome can be attributed to the excessive release of Li+ ions into the extracellular matrix, hindering the desired effect. Overall, the IPN-Li hydrogel developed in this study holds great promise as a biodegradable material for bone regeneration applications.

In vitro and in vivo Evaluation of Folic Acid Modified DOX-Loaded 32P-nHA Nanoparticles in Prostate Cancer Therapy

Background

Prostate cancer (PCa) ranks second in the incidence of all malignancies in male worldwide. The presence of multi-organ metastases and tumor heterogeneity often leads to unsatisfactory outcomes of conventional radiotherapy treatments. This study aimed to develop a novel folate-targeted nanohydroxyapatite (nHA) coupling to deliver adriamycin (Doxorubicin, DOX), ³²P, and ^99mTc simultaneously for the diagnosis and treatment of prostate-specific membrane antigen (PSMA) positive prostate cancer.

Methods

The spherical nHA was prepared by the biomimetic method and characterized. Folic acid (FA) was coupled to nHA with polyethylene glycol (PEG), and the grafting ratio of PEG-nHA and FA-PEG-nHA was determined by the thermogravimetric analysis (TGA) method. In addition, ³²P, ^99mTc, and DOX were loaded on nHA by physisorption. And the labeling rate and stability of radionuclides were measured by a γ-counter. The loading and release of DOX at different pH were determined by the dialysis method. Targeting of FA-PEG-nHA loaded with ^99mTc was verified by in vivo SPECT imaging. In vitro anti-tumor effect of ³²P/DOX-FA-PEG-nHA was assessed with apoptosis assay. The safety of the nano-drugs was verified by histopathological analysis.

Results

The SEM images showed that the synthesized nHA was spherical with uniform particle size (average diameter of about 100nm). The grafting ratio is about 10% for PEG and about 20% for FA. The drug loading and the delayed release of DOX at different pH confirmed its long-term therapeutic ability. The labeling of ³²P and ^99mTc was stable and the labeling rate was great. SPECT showed that FA-PEG-nHA showed well in vivo tumor targeting and less damage to normal tissues.

Conclusion

FA-targeted nHA loaded with ³²P, ^99mTc, and DOX may be a new diagnostic and therapeutic strategy for targeting PSMA-positive prostate cancer tumors, which may achieve better therapeutic results while circumventing the severe toxic side effects of conventional chemotherapeutic agents.

In Vivo Evaluation of the Effects of B-Doped Strontium Apatite Nanoparticles Produced by Hydrothermal Method on Bone Repair

In the present study, the structural, morphological, and in vivo biocompatibility of un-doped and boron (B)-doped strontium apatite (SrAp) nanoparticles were investigated. Biomaterials were fabricated using the hydrothermal process. The structural and morphological characterizations of the fabricated nanoparticles were performed by XRD, FT-IR, FE-SEM, and EDX. Their biocompatibility was investigated by placing them in defects in rat tibiae in vivo. The un-doped and B-doped SrAp nanoparticles were successfully fabricated. The produced nanoparticles were in the shape of nano-rods, and the dimensions of the nano-rods decreased as the B ratio increased. It was observed that the structural and morphological properties of strontium apatite nanoparticles were affected by the contribution of B. A stoichiometric Sr/P ratio of 1.67 was reached in the 5% B-doped sample (1.68). The average crystallite sizes were 34.94 nm, 39.70 nm, 44.93 nm, and 48.23 nm in un-doped, 1% B-doped, 5% B-doped, and 10% B-doped samples, respectively. The results of the in vivo experiment revealed that the new bone formation and osteoblast density were higher in the groups with SrAp nanoparticles doped with different concentrations of B than in the control group, in which the open defects were untreated. It was observed that this biocompatibility and the new bone formation were especially elevated in the B groups, which added high levels of strontium were added. The osteoblast density was higher in the group in which the strontium element was placed in the opened bone defect compared with the control group. However, although new bone formation was slightly higher in the strontium group than in the control group, the difference was not statistically significant. Furthermore, the strontium group had the highest amount of fibrotic tissue formation. The produced nanoparticles can be used in dental and orthopedic applications as biomaterials.

Osteogenesis Performance of Boronized Ti6Al4V/HA Composites Prepared by Microwave Sintering: In Vitro and In Vivo Studies

The boronized Ti6Al4V/HA composite is deemed to be an important biomaterial because of its potential remarkable mechanical and biological properties. This paper reports the osteogenesis performance of the boronized Ti6Al4V/HA composite, which was prepared by microwave sintering of powders of Ti6Al4V, hydroxyapatite (HA), and TiB₂ in high-purity Ar gas at 1050 °C for 30 min, as dental implant based on both cell experiments in vitro and animal experiments in vivo. The comparison between the boronized Ti6Al4V/HA composite and Ti, Ti6Al4V, and boronized Ti6Al4V in the terms of adhesion, proliferation, alkaline phosphate (ALP) activity, and mineralization of MG-63 cells on their surfaces confirmed that the composite exhibited the best inductive osteogenesis potential. It exerted a more significant effect on promoting the early osteogenic differentiation of osteoblasts and exhibited the maximum optical density (OD) value in the MTT assay and the highest levels of ALP activity and mineralization ability, primarily ascribed to its bioactive HA component, porous structure, and relatively rough micro-morphology. The in vivo study in rabbits based on the micro-computed tomography (micro-CT) analysis, histological and histomorphometric evaluation, and biomechanical testing further confirmed that the boronized Ti6Al4V/HA composite had the highest new bone formation potential and the best osseointegration property after implantation for up to 12 weeks, mainly revealed by the measured values of bone volume fraction, bone implant contact, and maximum push-out force which, for example, reached 48.64%, 61%, and 150.3 ± 6.07 N at the 12th week. Owing to these inspiring features, it can serve as a highly promising dental implant.

Applications of Calcium-Based Nanomaterials in Osteoporosis Treatment

With rapidly aging populations worldwide, osteoporosis has become a serious global public health problem. Caused by disordered systemic bone remodeling, osteoporosis manifests as progressive loss of bone mass and microarchitectural deterioration of bone tissue, increasing the risk of fractures and eventually leading to osteoporotic fragility fractures. As fracture risk increases, antiosteoporosis treatments transition from nonpharmacological management to pharmacological intervention, and finally to the treatment of fragility fractures. Calcium-based nanomaterials (CBNMs) have unique advantages in osteoporosis treatment because of several characteristics including similarity to natural bone, excellent biocompatibility, easy preparation and functionalization, low pH-responsive disaggregation, and inherent pro-osteogenic properties. By combining additional ingredients, CBNMs can play multiple roles to construct antiosteoporotic biomaterials with different forms. This review covers recent advances in CBNMs for osteoporosis treatment. For ease of understanding, CBNMs for antiosteoporosis treatment can be classified as locally applied CBNMs, such as implant coatings and filling materials for osteoporotic bone regeneration, and systemically administered CBNMs for antiosteoporosis treatment. Locally applied CBNMs for osteoporotic bone regeneration develop faster than the systemically administered CBNMs, an important consideration given the serious outcomes of fragility fractures. Nevertheless, many innovations in construction strategies and preparation methods have been applied to build systemically administered CBNMs. Furthermore, with increasing interest in delaying osteoporosis progression and avoiding fragility fracture occurrence, research into systemic administration of CBNMs for antiosteoporosis treatment will have more development prospects. Deep understanding of the CBNM preparation process and optimizing CBNM properties will allow for increased application of CBNMs in osteoporosis treatments in the future.

Comparison capacity of collagen hydrogel, mix-powder and in situ hydroxyapatite/collagen hydrogelscaffolds with and without mesenchymal stem cells and platelet-rich plasma in regeneration of critical sized bone defect in a rabbit animal model

The aim of this study was to investigate the effect of developed collagen (Co) hydrogel (CH), powder-mixed hydroxyapatite/collagen (HA/Co) hydrogel and in situ synthesized HA/Co (In/HA/Co) hydrogel with or without mesenchymal stem cell (MSC) and platelet-rich plasma (PRP) on the regeneration of full-thickness critical size bone defect in the rabbit animal model. In the first step of this study, the scaffolds were synthesized and characterized using FTIR spectroscopy, X-ray diffraction, and scanning electron microcopy. In the second step or animal study, the radial bone defects were filled with the synthesized scaffolds with and without MSC and PRP. One hundred sixty one year-old New Zealand white male rabbits were randomly divided in 16 groups of 10 rabbits including control with bone defect without treatment, In/HA/Co, HA/Co, CH, PRP, MSC, CH + PRP, HA/Co, In/HA/Co + PRP, HA/Co + PRP, CH + MSC, In/HA/Co + MSC, HA/Co + MSC, CH + PRP + MSC, In/HA/Co + PRP + MSC, and HA/Co + PRP + MSC. The created defects were filled using the constructed scaffolds alone or seeded with MSCs, with and without PRP injection. The treatments were assessed using histopathological, immunohistochemical and rediographical analysis on days 14, 28, 42, 56 post-treatment. The plate-like HA particles were distributed homogeneously in the in situ HA/Co scaffold compared to the HA/Co scaffold and had a similar structure to bone with carbonated plate-like HA particles and nanofibrilated Co matrix. In situ HA/Co nanocomposite seeded with MSC and enriched by PRP can accelerate bone regeneration resulted from osteoblastic production of osteocalcin protein. Therefore, in situ HA/Co hydrogel seeded with MSC and PRP can be a new approach for bone tissue engineering.