Mild Alkaline Pretreatment of Rice Straw as a Feedstock in Microbial Fuel Cells for Generation of Bioelectricity

Production of carotenoids from aromatics and pretreated lignocellulosic biomass by Novosphingobium aromaticivorans

IMPORTANCE

There is economic and environmental interest in generating commodity chemicals from renewable resources, such as lignocellulosic biomass, that can substitute for chemicals derived from fossil fuels. The bacterium Novosphingobium aromaticivorans is a promising microbial platform for producing commodity chemicals from lignocellulosic biomass because it can produce these from compounds in pretreated lignocellulosic biomass, which many industrial microbial catalysts cannot metabolize. Here, we show that N. aromaticivorans can be engineered to produce several valuable carotenoids. We also show that engineered N. aromaticivorans strains can produce these lipophilic chemicals concurrently with the extracellular commodity chemical 2-pyrone-4,6-dicarboxylic acid when grown in a complex liquor obtained from alkaline pretreated lignocellulosic biomass. Concurrent microbial production of valuable intra- and extracellular products can increase the economic value generated from the conversion of lignocellulosic biomass-derived compounds into commodity chemicals and facilitate the separation of water- and membrane-soluble products.

Green chemical and hybrid enzymatic pretreatments for lignocellulosic biorefineries: Mechanism and challenges

The greener chemical and enzymatic pretreatments for lignocellulosic biomasses are portraying a crucial role owing to their recalcitrant nature. Traditional pretreatments lead to partial degradation of lignin and hemicellulose moieties from the pretreated biomass. But it still restricts the enzyme accessibility for the digestibility towards the celluloses and the interaction of lignin-enzymes, nonproductively. Moreover, incursion of certain special chemical treatments and other lignin sulfonation techniques to the enzymatic pretreatment (hybrid enzymatic pretreatment) enhances the lignin structural modification, solubilization of the hemicelluloses and both saccharification and fermentation processes (SAF). This article concentrates on recent developments in various chemical and hybrid enzymatic pretreatments on biomass materials with their mode of activities. Furthermore, the issues on strategies of the existing pretreatments towards their industrial applications are highlighted, which could lead to innovative ideas to overcome the challenges and give guideline for the researchers towards the lignocellulosic biorefineries.

Effect of Sodium Lauryl Sulfate on Sorption of Cells of the Electrogenic Bacterium Strain Micrococcus luteus on Carbon Cloth

Results of a study into the effect of anionic surfactant sodium lauryl sulfate on the sorption of cells of the electrogenic bacteria strain Micrococcus luteus 1-I on the surface of carbon cloth used as electrodes in microbial fuel cell (MFC) technology are presented. Investigations using spectrophotometry, microscopy and microbiology revealed an increase in the degree of sorption of microbial cells on carbon cloth under the action of sodium lauryl sulfate at concentrations of 10 and 100 mg/l. The sorption of cells did not significantly differ from the control at a surfactant content of 200, 400 and 800 mg/l. It had no negative effect on bacterial growth in the concentration range from 10 to 800 mg/l. Due to the fairly high resistance of the electrogenic strain M. luteus 1-I to sodium lauryl sulfate, a widespread component of wastewater, it may be considered as a prospective bioagent for the treatment of domestic wastewater using MFC technology.

Ethanol Production through Optimized Alkaline Pretreated Elaeis guineensis Frond Waste from Krabi Province, Thailand

Oil palm frond as an abundant and inexpensive lignocellulosic waste was used to optimize alkaline pretreatment for ethanol production. The studied lignocellulosic waste is one of the largest biomasses (47%) in oil palm waste. Oil palm frond fibers were processed by steam explosion, hot water extraction, and alkaline extraction pretreatment, followed by simultaneous saccharification and fermentation (SSF), for ethanol production as an alternative energy resource. To optimize alkaline extraction for oil palm frond, a Taguchi method with a three-factor design constituted a concentration of NaOH (15%, 20%, and 25%), time (30, 60, and 90 min), and temperature (70, 80, and 90 °C). An optimum alkaline extraction condition of 15% NaOH at 90 °C for 60 min gave the highest percentage of α-cellulose (80.74%) and the lowest percentages of lignin (15.99%), ash (1.05%), and pentosan (2.09%). In addition, the optimized pretreatment condition significantly improved α-cellulose to 52.65% and removed lignin up to 51.78%. Simultaneous saccharification and fermentation (SSF) was carried out with 10% (dry weight) alkaline pretreated OPF fibers, Celluclast 1.5 L (15 FU/gram substrate), Novozyme 188 (15 IU/gram substrate), and Saccharomyces cerevisiae SC90 at 40 and 45 °C. The highest ethanol concentration, theoretical ethanol yield, and ethanol productivity observed at 40 °C were 33.15 g/L, 72.54%, and 0.55 g/L/h, respectively. The results suggest that an optimized alkaline pretreatment process using palm frond as a lignocellulosic waste is a sustainable approach to produce efficient ethanol production.

Use of Banana Waste as a Source for Bioelectricity Generation

The large amounts of organic waste thrown into the garbage without any productivity, and the increase in the demand for electrical energy worldwide, has led to the search for new eco-friendly ways of generating electricity. Because of this, microbial fuel cells have begun to be used as a technology to generate bioelectricity. The main objective of this research was to generate bioelectricity through banana waste using a low-cost laboratory-scale method, achieving the generation of maximum currents and voltages of 3.71667 ± 0.05304 mA and 1.01 ± 0.017 V, with an optimal pH of 4.023 ± 0.064 and a maximum electrical conductivity of the substrate of 182.333 ± 3.51 µS/cm. The FTIR spectra of the initial and final substrate show a decrease in the peaks belonging to phenolic compounds, alkanes, and alkenes, mainly. The maximum power density was 5736.112 ± 12.62 mW/cm2 at a current density of 6.501 A/cm2 with a peak voltage of 1006.95 mV. The molecular analysis of the biofilm formed on the anode electrode identified the species Pseudomonas aeruginosa (100%), and Paenalcaligenes suwonensis (99.09%), Klebsiella oxytoca (99.39%) and Raoultella terrigena (99.8%), as the main electricity generators for this type of substrate. This research gives a second use to the fruit with benefits for farmers and companies dedicated to exporting and importing because they can reduce their expenses by using their own waste.