Current perspectives of biodegradable drug-eluting stents for improved safety

Comparative study of different polymeric coatings for the next-generation magnesium-based biodegradable stents

Development of next-generation bioabsorbable stents based on magnesium alloys is gaining lots of attention. However, finding an appropriate coating in order to enhance its corrosion resistance along with preserving other requirements is still a challenge. In this study, three FDA-approved polymers, namely poly(lactic acid), polycaprolactone and poly(lactic-co-glycolic acid), have been investigated as potential coatings for magnesium-based stents to enhance their corrosion resistance, biocompatibility and haemocompatibility. Potentiodynamic and electrochemical impedance spectroscopy results demonstrated that PLA and PLGA coating performed better in improving corrosion resistance in comparison with uncoated and other coated samples. Although all coated and bare samples displayed desirable results of haemocompatibility assays, PLA-coated samples showed better outcome in terms of biocompatibility. The results revealed that PLA can be considered as a potential coating material to enhance the main characteristics of magnesium-based bioabsorbable stents.

Sirolimus-eluting dextran and polyglutamic acid hybrid coatings on AZ31 for stent applications

Magnesium (Mg)-based cardiovascular stents are promising candidate as the next generation of novel stents. Clinical studies have revealed encouraging outcomes, but late restenosis and thrombogenesis still largely exist. Blood and vascular biocompatible coatings with drug-eluting features could be the solution to such problems.

OBJECTIVE

This study was to investigate the feasibility of a three-layer hybrid coating on Mg alloy AZ31 with sirolimus-eluting feature for cardiovascular stent application.

MATERIALS AND METHODS

The first and third layers were low molecular weight dextran loaded with sirolimus, and the second layer was polyglutamic acid (PGA) to control sirolimus release. The hybrid coating was verified by scanning electron microscope (SEM). DC polarization and immersion tests were used to evaluate corrosion rate of the materials. Indirect cell viability and cell proliferation tests were performed by culturing cells with extract solutions of AZ31 samples. Blood compatibility was assessed using hemolysis assay.

RESULTS

Coated samples had an enhanced corrosion resistance than that of uncoated controls, more PGA slower corrosion. Sirolimus had a burst release for the initial ∼3 days and then a slower release until reached a plateau. The PGA thickness was able to control the sirolimus release, the thicker of PGA the slower release. The overall cell viability was extract concentration-dependent, and improved by the hybrid coatings. Cell proliferation was correlated to coating thickness and was inhibited by sirolimus. In addition, all coated AZ31 samples were non-hemolytic.

CONCLUSION

Results demonstrated that such a three-layer hybrid coating may be useful to improve the vascular biocompatibility of Mg stent materials.

Similarities and differences in coatings for magnesium-based stents and orthopaedic implants

Magnesium (Mg)-based biodegradable materials are promising candidates for the new generation of implantable medical devices, particularly cardiovascular stents and orthopaedic implants. Mg-based cardiovascular stents represent the most innovative stent technology to date. However, these products still do not fully meet clinical requirements with regards to fast degradation rates, late restenosis, and thrombosis. Thus various surface coatings have been introduced to protect Mg-based stents from rapid corrosion and to improve biocompatibility. Similarly, different coatings have been used for orthopaedic implants, e.g., plates and pins for bone fracture fixation or as an interference screw for tendon-bone or ligament-bone insertion, to improve biocompatibility and corrosion resistance. Metal coatings, nanoporous inorganic coatings and permanent polymers have been proved to enhance corrosion resistance; however, inflammation and foreign body reactions have also been reported. By contrast, biodegradable polymers are more biocompatible in general and are favoured over permanent materials. Drugs are also loaded with biodegradable polymers to improve their performance. The key similarities and differences in coatings for Mg-based stents and orthopaedic implants are summarized.