A Feasibility Study of the Electro-recycling of Greenhouse Gases: Design and Characterization of a (TiO2/RuO2)/PTFE Gas Diffusion Electrode for the Electrosynthesis of Methanol from Methane

Fundamental Limitation in Electrochemical Methane Oxidation to Alcohol: A Review and Theoretical Perspective on Overcoming It

The direct conversion of gaseous methane to energy-dense liquid derivatives such as methanol and ethanol is of profound importance for the more efficient utilization of natural gas. However, the thermo-catalytic partial oxidation of this simple alkane has been a significant challenge due to the high C-H bond energy. Exploiting electrocatalysis for methane activation via active oxygen species generated on the catalyst surface through electrochemical water oxidation is generally considered as economically viable and environmentally benign compared to energy-intensive thermo-catalysis. Despite recent progress in electrochemical methane oxidation to alcohol, the competing oxygen evolution reaction (OER) still impedes achieving high faradaic efficiency and product selectivity. In this review, an overview of current progress in electrochemical methane oxidation, focusing on mechanistic insights on methane activation, catalyst design principles based on descriptors, and the effect of reaction conditions on catalytic performance are provided. Mechanistic requirements for high methanol selectivity, and limitations of using water as the oxidant are discussed, and present the perspective on how to overcome these limitations by employing carbonate ions as the oxidant.

Electro-assisted methane oxidation to formic acid via in-situ cathodically generated H2O2 under ambient conditions

Direct partial oxidation of methane to liquid oxygenates has been regarded as a potential route to valorize methane. However, CH4 activation usually requires a high temperature and pressure, which lowers the feasibility of the reaction. Here, we propose an electro-assisted approach for the partial oxidation of methane, using in-situ cathodically generated reactive oxygen species, at ambient temperature and pressure. Upon using acid-treated carbon as the electrocatalyst, the electro-assisted system enables the partial oxidation of methane in an acidic electrolyte to produce oxygenated liquid products. We also demonstrate a high production rate of oxygenates (18.9 μmol h-1) with selective HCOOH production. Mechanistic analysis reveals that reactive oxygen species such as ∙OH and ∙OOH radicals are produced and activate CH4 and CH3OH. In addition, unstable CH3OOH generated from methane partial oxidation can be additionally reduced to CH3OH on the cathode, and so-produced CH3OH is further oxidized to HCOOH, allowing selective methane partial oxidation.

Partial Methane Oxidation in Fuel Cell-Type Reactors for Co-Generation of Energy and Chemicals: A Short Review

The conversion of methane into chemicals is of interest to achieve a decarbonized future. Fuel cells are electrochemical devices commonly used to obtain electrical energy but can be utilized either for chemicals’ production or both energy and chemicals cogeneration. In this work, the partial oxidation of methane in fuel cells for electricity generation and valuable chemicals production at the same time is reviewed. For this purpose, we compile different types of methane-fed fuel cells, both low- and high-temperature fuel cells. Despite the fact that few studies have been conducted on this subject, promising results are driving the development of fuel cells that use methane as a fuel source for the cogeneration of power and valuable chemicals.

Electrocatalytic Methane Oxidation Greatly Promoted by Chlorine Intermediates

Renewable energy-powered methane (CH₄ ) conversion at ambient conditions is an attractive but highly challenging field. Due to the highly inert character of CH₄ , the selective cleavage of its first C-H bond without over-oxidation is essential for transforming CH₄ into value-added products. In this work, we developed an efficient and selective CH₄ conversion approach at room temperature using intermediate chlorine species (*Cl), which were electrochemically generated and stabilized on mixed cobalt-nickel spinels with different Co/Ni ratios. The lower overpotentials for *Cl formation enabled an effective activation and conversion of CH₄ to CH₃ Cl without over-oxidation to CO₂ , and Ni³⁺ at the octahedral sites in the mixed cobalt-nickel spinels allowed to stabilize surface-bound *Cl species. The CoNi₂ O_x electrocatalyst exhibited an outstanding yield of CH₃ Cl (364 mmol g^-1  h^-1 ) and a high CH₃ Cl/CO₂ selectivity of over 400 at room temperature, with demonstrated capability of direct CH₄ conversion under seawater working conditions.

First-Principles Evaluation of One-Dimensional Metal-Organic Frameworks for Electrocatalytic C-H Activation of Natural Gas

To replace the oxygen evolution reaction with thermodynamically more favorable and economically more profitable methane and ethane (the major components of natural gas) electrochemical partial oxidation, we employed constant electrode potential density functional theory calculations to screen 20 one-dimensional metal-organic frameworks containing heteroatom-substituted benzene as electrocatalysts. By computing the Pourbaix diagrams, O-H binding energies, and C-H activation barriers, we determined that although none of these catalysts were able to activate methane, one was able to hydroxylate ethane to ethanol with facile kinetics, making it a promising electrocatalyst for natural gas oxidation.

Catalytic Oxidation of Methane to Oxygenated Products: Recent Advancements and Prospects for Electrocatalytic and Photocatalytic Conversion at Low Temperatures

Methane is an important fossil fuel and widely available on the earth's crust. It is a greenhouse gas that has more severe warming effect than CO2. Unfortunately, the emission of methane into the atmosphere has long been ignored and considered as a trivial matter. Therefore, emphatic effort must be put into decreasing the concentration of methane in the atmosphere of the earth. At the same time, the conversion of less valuable methane into value-added chemicals is of significant importance in the chemical and pharmaceutical industries. Although, the transformation of methane to valuable chemicals and fuels is considered the "holy grail," the low intrinsic reactivity of its C-H bonds is still a major challenge. This review discusses the advancements in the electrocatalytic and photocatalytic oxidation of methane at low temperatures with products containing oxygen atom(s). Additionally, the future research direction is noted that may be adopted for methane oxidation via electrocatalysis and photocatalysis at low temperatures.