Thermal, structural and textural properties of amaranth and buckwheat starches

Structural characterization and physicochemical properties of grain amaranth starch

With potato starch (PS) and corn starch (CS) as the controls, the structure and physicochemical properties of grain amaranth starch (GAS) and its binding with dihydromyricetin were investigated in this study. The results indicated that GAS granules were small in size (3.21 ± 0.13 μm) and had a low amylose content (11.57 ± 0.91%). GAS exhibited low paste clarity, solubility, and swelling power, but demonstrated good freeze-thaw stability and resistance to retrogradation. Although the pasting temperature of GAS was high (75.88 ± 0.03 °C), its peak viscosity, breakdown viscosity, and setback viscosity were significantly lower than those of PS and CS. GAS was classified as A-type starch, with a high molecular weight and broad distribution (Mw, 3.96 × 107 g/mol; PDI, 2.67). For its chain length distribution, chain B1 had the highest proportion (50.09%), while chain B3 had the lowest proportion (13.50%). The complexation of GAS with dihydromyricetin effectively enhanced its ABTS and DPPH free radical scavenging capacities.

Tartary Buckwheat Starch Modified with Octenyl Succinic Anhydride for Stabilization of Pickering Nanoemulsions

In this study, Tartary buckwheat starch was modified to different degrees of substitution (DS) with octenyl succinate anhydride (OS-TBS) in order to explore its potential for stabilizing Pickering nanoemulsions. OS-TBS was prepared by reacting Tartary buckwheat starch with 3, 5 or 7% (w/v) octenyl succinate in an alkaline aqueous solution at pH 8.5. Fourier-transform infrared spectroscopy gave peaks at 1726 cm−1 (C=O) and 1573 cm−1 (RCOO−), indicating the formation of OS-TBS. We further studied the physicochemical properties of the modified starch as well as its emulsification capacity. As the DS with octenyl succinate anhydride increased, the amylose content and gelatinization temperature of the OS-TBS decreased, while its solubility increased. In contrast to the original Tartary buckwheat starch, OS-TBS showed higher surface hydrophobicity, and its particles were more uniform in size and its emulsification stability was better. Higher DS with octenyl succinate led to better emulsification. OS-TBS efficiently stabilized O/W Pickering nanoemulsions and the average particle size of the emulsion was maintained at 300–400 nm for nanodroplets. Taken together, these results suggest that OS-TBS might serve as an excellent stabilizer for nanoscale Pickering emulsions. This study may suggest and expand the use of Tartary buckwheat starch in nanoscale Pickering emulsions in various industrial processes.

Enhanced Bioaccessibility of Microencapsulated Puerarin Delivered by Pickering Emulsions Stabilized with OSA-Modified Hydrolyzed Pueraria montana Starch: In Vitro Release, Storage Stability, and Physicochemical Properties

Puerarin is a bioactive flavonoid isolated from Kudzu roots that possesses numerous health benefits. However, its poor bioavailability and existing complex delivery systems with safety issues are challenging tasks for its incorporation into functional foods. Preparing modified-starch-stabilized Pickering emulsions containing microencapsulated puerarin with improved bioaccessibility was the key objective of the present research work. Acid-hydrolyzed high-amylose Pueraria montana starch (PMS) was modified with octenyl succinic anhydride (OSA) and evaluated as an emulsifier to prepare emulsions. The FTIR, SEM, and XRD results showed that PMS was successfully modified. Furthermore, the emulsification index (EI), mean droplet size, and ζ-potential values showed that modified starch with a higher degree of substitution (DS) enhanced the storage stability of emulsions. Similarly, the retention degree and encapsulation efficiency results of puerarin proved the assumption after storage of 16 d. The Pickering emulsions also helped in the controlled release of microencapsulated puerarin in vitro. The study outcomes proved that Pickering emulsions stabilized with OSA-modified PMS have promising applicability in functional foods as efficient food-grade delivery systems, enhancing oral supplementation and accessibility of puerarin.

Study of Changes in Crystallinity and Functional Properties of Modified Sago Starch (Metroxylon sp.) Using Physical and Chemical Treatment

Sago starch has weaknesses such as low thermal stability and high syneresis. Modifications were made to improve the characteristics of native sago starch. In this study, sago starch was modified by autoclave-heating treatment (AHT), osmotic-pressure treatment (OPT), octenyl-succinic anhydride modification (OSA), and citric acid cross-linking (CA). This study aimed to examine the changes in chemical composition, crystallinity, and functional properties of the native sago starch after physical and chemical modifications. The results show that physical modification caused greater granule damage than chemical modification. All modification treatments did not alter the type of crystallinity but decreased the relative crystallinity of native starch. New functional groups were formed in chemically modified starches at a wavelength of 1700-1725 cm-1. The degree of order (DO) and degree of double helix (DD) of the modified starches were also not significantly different from the native sample, except for AHT and OPT, respectively. Physical modification decreased the swelling volume, while chemical modification increased its value and is inversely proportional to solubility. AHT and OPT starches have the best freeze-thaw stability among others, indicating that both starches have the potential to be applied in frozen food.

Effects of single and dual modifications through electron beam irradiation and hydroxypropylation on physicochemical properties of potato and corn starches

In this study, electron beam irradiation (EBI; 2, 4, 6, 8 and 10 kGy), hydroxypropylation (HP) and dual modification of EBI-HP were applied to modify corn and potato starches. The results showed that the molar substitution (MS) of EBI-HP modified corn and potato starches were in the range of 0.060-0.087 and 0.080-0.124, respectively. After modifications, amylose content of corn (30.0 %) and potato (31.2 %) starches were declined to 24.2-28.1 % and 26.1-29.5 %, respectively, and relative crystallinity was reduced from 35.5 to 30.0 % for corn and 34.1 to 20.2 % for potato. Pasting properties decreased significantly in both starch sources with increasing irradiation dose. EBI decreased springiness, enthalpy of retrograded starch (ΔHr) and percentage of retrogradation (R%) on corn starches, which were different from those effects observed on potato starches. Meanwhile, HP increased peak viscosity up to 312.6 RVU and 1359.3 RVU for corn and potato starches, respectively. Moreover, EBI-HP was highly responsible for the decreases in the textural, gelatinization and retrogradation properties and relative crystallinity in both corn and potato starches. These results enhance the understanding of starch functionality modified by using both physical and chemical methods, and provide further insights on food and non-food applications.

Optimization of Concentration-Time, Agar, and Sugar Concentration for Sweet Gelatinized Adzuki-Bean Jelly Cake (Yokan) by Response Surface Methodology

Samples of sweet gelatinized adzuki-bean jelly cake were successfully prepared and systematically analyzed to investigate the factors that affect the production, quality, and gelatin properties of yokan (gelatinized adzuki bean cake). The purpose of this study was to investigate the properties of gelatinized adzuki-bean cake gelatin and identify the optimal production conditions using response surface methodology with three factors: agar concentration, sugar concentration, and concentration time. Findings show that the optimum processing conditions are 1.2-1.5% agar concentration and 34-40% sugar concentration, with 30-40 min concentration time. These conditions produced a gelatinized adzuki-bean cake favored by the majority of the sensory evaluators. Overall, the relationships between different gelatinized adzuki-bean cake processing conditions and gelatin properties were preliminarily clarified. The findings not only provide a promising avenue for gelatinized adzuki-bean cake production but also promote the potential application of various processing conditions in quality improvement.

Morphological, pasting, and textural characterization of starches and their sub fractions of good and poor cookie making wheat varieties

Starch and its sub-fractions of good and poor cookie quality wheat varieties were examined. Scanning electron microscopy images demonstrated that A-type starch granules were lenticular shape with larger diameter of 18.80-21.50 μm, whereas B-type starch granules displayed spherical shape with smaller diameter of 3.93-5.10 μm. Rapid Visco Analyzer pasting profiles of starch and its fractions of poor cookie quality displayed greater peak, trough, final, and setback viscosity compared the starch of good cookie quality wheat variety. On the contrary, the starch of good cookie quality wheat exhibited higher pasting temperature than the starch of poor cookie quality variety. Texture Analyzer results revealed that starch gel hardness, gumminess, and chewiness were found higher for poor cookie quality wheat variety as compared to starch of good cookie quality wheat.