Growth kinetics of Pseudomonas aeruginosa RS1 on fluorene and dibenzothiophene, concomitant degradation kinetics and uptake mechanism

Dibenzothiophene removal by environmental bacteria with differential accumulation of intracellular inorganic polyphosphate

Dibenzothiophene (DBT), which belongs to the group of polycyclic aromatic heterocycles of sulfur, is a model substance to study the removal of sulfur compounds from oil due to its recalcitrance to traditional and specific removal processes. The aim of this work was to evaluate DBT bioremoval by environmental bacteria and its relationship with polyphosphate (polyP) accumulation, cell surface characteristics and bioemulsifying activity. Pseudomonas sp. P26 achieved the highest DBT removal percentage (48%) after 7 days of incubation. Moreover, positive correlations were estimated between DBT removal and bioemulsifying activity and biofilm formation. A strain-dependent relationship between the content of intracellular polyP and the presence of DBT in the culture medium was also demonstrated. The study of these bacterial characteristics, which could promote DBT transformation, is a first approach to select DBT-removing bacteria, in order to develop bioformulations that are able to contribute to desulfurization processes of petroleum-derived pollutants in the future.

Searching for bacteria able to metabolize polycyclic aromatic sulfur compounds in 12-years periodically fed bioreactor

Biodesulfurization is a promising alternative for removing sulfur molecules from the polycyclic aromatic sulfur compounds (PASC) found in petroleum. PASC consists of recalcitrant molecules that can degrade fuel quality and cause a range of health and environmental problems. Therefore, identifying bacteria capable of degrading PASC is essential for handling these recalcitrant molecules. Microorganisms in environments exposed to petroleum derivatives have evolved specific enzymatic machinery, such as the 4S pathway associated with the dszABC genes, which are directly linked to sulfur removal and utilization as nutrient sources in the biodesulfurization process. In this study, bacteria were isolated from a bioreactor containing landfarm soil that had been periodically fed with petroleum for 12 years, using a medium containing dibenzothiophene (DBT), 4.6-dimethylbenzothiophene, 4-methylbenzothiophene, or benzothiophene. This study aimed to identify microorganisms capable of degrading PASC in such environments. Among the 20 colonies isolated from an inoculum containing DBT as the sole sulfur source, only four isolates exhibited amplification of the dszA gene in the dszABC operon. The production of 2-hydroxybiphenyl (HPB) and a decrease in DBT were detected during the growth curve and resting cell assays. The isolates were identified using 16S rRNA sequencing belonging to the genera Stutzerimonas and Pseudomonas. These isolates demonstrated significant potential for biodesulfurization and/or degradation of PASC. All isolates possessed the potential to be utilized in the biotechnological processes of biodesulfurization and degradation of recalcitrant PASC molecules.

Catalytic resilience of multicomponent aromatic ring-hydroxylating dioxygenases in Pseudomonas for degradation of polycyclic aromatic hydrocarbons

Hydrophobic organic compounds, either natural or introduced through anthropogenic activities, pose a serious threat to all spheres of life, including humankind. These hydrophobic compounds are recalcitrant and difficult to degrade by the microbial system; however, microbes have also evolved their metabolic and degradative potential. Pseudomonas species have been reported to have a multipotential role in the biodegradation of aromatic hydrocarbons through aromatic ring-hydroxylating dioxygenases (ARHDs). The structural complexity of different hydrophobic substrates and their chemically inert nature demands the explicit role of evolutionary conserved multicomponent enzyme ARHDs. These enzymes catalyze ring activation and subsequent oxidation by adding two molecular oxygen atoms onto the vicinal carbon of the aromatic nucleus. This critical metabolic step in the aerobic mode of degradation of polycyclic aromatic hydrocarbons (PAHs) catalyzed by ARHDs can also be explored through protein molecular docking studies. Protein data analysis enables an understanding of molecular processes and monitoring complex biodegradation reactions. This review summarizes the molecular characterization of five ARHDs from Pseudomonas species already reported for PAH degradation. Homology modeling for the amino acid sequences encoding the catalytic α-subunit of ARHDs and their docking analyses with PAHs suggested that the enzyme active sites show flexibility around the catalytic pocket for binding of low molecular weight (LMW) and high molecular weight (HMW) PAH substrates (naphthalene, phenanthrene, pyrene, benzo[α]pyrene). The alpha subunit harbours variable catalytic pockets and broader channels, allowing relaxed enzyme specificity toward PAHs. ARHD's ability to accommodate different LMW and HMW PAHs demonstrates its 'plasticity', meeting the catabolic demand of the PAH degraders.

Biodegradation kinetics and metabolism of Benzo(a)fluorene by Pseudomonas strains isolated from refinery effluent

The final sinkers of polyaromatic hydrocarbons are water sources, where they undergo bioaccumulation and biomagnification, leading to adverse mutagenic, carcinogenic, and teratogenic effects on exposure in flora, fauna, and humans. Two indigenous strains, Pseudomonas sp. WDE11 and Pseudomonas sp. WD23, isolated from refinery effluent, degraded over 97.5% of benzo(a)fluorene (10 mg/L) in 7 days. On growth at concentration dependent amounts (50 mg/L and 100 mg/L), the degradation reduced to approximately 90% and 80% respectively in 56 days. Degradation kinetics was concentration dependent, as degradation followed first-order and second-order kinetics for 50 mg/L and 100 mg/L respectively. The half-life for degradation of benzo(a)fluorene ranged between 11.64 - 12.26 days and 13.11-14.5 days for strains WDE11 and WD23 respectively. The values of Andrew-Haldane kinetic parameters i.e. μ_max, K_s, and K_i were 0.306 day^-1, 11.11 mg/L, and 120.41 mg/L for strain WDE11 respectively, while for strain WD23, the respective values were 0.312 day^-1, 9.97 mg/L, and 152 mg/L. Degradation metabolites were identified by their MS patterns as 3,4-dihydroxy fluorene, 2-(1-oxo-2,3-dihydro-1H-inden-2-yl) acetic acid, 3,4-dihydrocoumarin, salicylic acid, catechol, and oxalic acid. Metabolic pathway of degradation constructed, revealed that benzo(a)fluorene was metabolized via the formation of fluorene, further metabolized by salicylate pathway forming catechol. The catechol formed was degraded into simpler metabolites by meta-cleavage pathway, which was validated by catechol 2,3 dioxygenase enzyme activity.

Characterization and biodegradability assessment of water-soluble fraction of oily sludge using stir bar sorptive extraction and GCxGC-TOF MS

Percolation of water through oily sludge during storage and handling of the sludge can cause soil and groundwater contamination. In this study, oily sludge from a refinery was equilibrated with water to obtain the water-soluble fraction (WSF) of oily sludge. The WSF had dissolved organic carbon (DOC) of 166 mg/L. Human cell line-based toxicity assay revealed IC₅₀ of 41 mg/L indicating its toxic nature. The predominant compounds in WSF of oily sludge included isomers of methyl, dimethyl and trimethyl quinolines and naphthalenes along with phenol derivatives and other polynuclear aromatic hydrocarbons (PAHs). Biodegradation of WSF of oily sludge was studied using a consortium of Rhodococcus ruber, Bacillus sp. and Bacillus cereus isolated from the refinery sludge. The consortium of the three strains resulted in 70% degradation over 15 days with a first-order degradation rate of 0.161 day^-1. Further analysis of the WSF was performed using the stir-bar sorptive extraction (SBSE) followed by GCxGC-TOF MS employing a PDMS Twister. The GCxGC analysis showed that Bacillus cereus was capable of degrading the quinoline, phenol and naphthalene derivatives in WSF of oily sludge at a faster rate compared to pyridine and benzoquinoline derivatives. Quinoline, phenol, biphenyl, naphthalene, pyridine and benzoquinolines derivatives in the WSF of oily sludge were reduced by 87%, 92%, 88%, 77%, 40% and 62%, respectively with respect to the controls. The WSF of oily sludge contained, n-alkanes, ranging from n-C12 to n-C18 which were removed within 2 days of biodegradation.

Differences in the properties of extracellular polymeric substances responsible for PAH degradation isolated from Mycobacterium gilvum SN12 grown on pyrene and benzo[a]pyrene

This study aimed to evaluate the differences in the characteristics of extracellular polymeric substances (EPSs) secreted by Mycobacterium gilvum SN12 (M.g. SN12) cultured on pyrene (Pyr) and benzo[a]pyrene (BaP). A heating method was used to extract EPSs from M.g. SN12, and the composition, emulsifying activity, and morphology of EPS extracts were investigated. Results showed that EPS extracts varied significantly with Pyr or BaP addition to the bacterial cultures. The concentration of proteins and carbohydrates, the main components of the EPS extracts, first increased and then decreased, with an increase in the concentration of Pyr (0-120 mg L^-1) and BaP (0-120 mg L^-1). A similar trend was observed for the emulsifying activity of the EPS extracts. EPSs extracted from all cultures exhibited a compact structure with a smooth surface, except for EPSs extracted from BaP-grown M.g. SN12, which revealed a more fragile and softer surface. These findings suggest that Pyr and BaP had different influences on the properties of isolated EPSs, providing insights into the mechanism underlying polycyclic aromatic hydrocarbons (PAHs) biodegradation by some EPS-secreting bacteria. To the best of our knowledge, this is the first report on the texture profile of EPS samples extracted from M.g. SN12 grown on PAHs.

Elucidation of substrate interaction effects in multicomponent systems containing 3-ring homocyclic and heterocyclic polynuclear aromatic hydrocarbons

Bacterial growth and degradation experiments were conducted on carbazole (CBZ), fluorene (FLU) and dibenzothiophene (DBT) individually and in various mixture combinations using an efficient polynuclear aromatic hydrocarbon (PAH) degrading bacterial strain, Pseudomonas aeruginosa RS1. In single component systems, bacterial growth on CBZ (specific growth rate, μ = 0.99 day^-1) was much higher compared to that on FLU (μ = 0.38 day^-1) and DBT (μ = 0.33 day^-1) and bacterial growth was inhibited in the presence of FLU and DBT in binary (μ = 0.64 day^-1) and ternary (μ = 0.75 day^-1) mixtures. Multisubstrate additive modelling indicated growth inhibition in all the systems. The degradation of the compounds was significantly inhibited in binary mixtures. While the degradation of the compounds in binary mixtures varied from 35 ± 4% to 73 ± 3%, their degradation varied from 61 ± 5% to 91 ± 4%, when applied as sole substrates and from 77 ± 3% to 96 ± 3%, when applied in a ternary mixture. Degradation experiments were also conducted in ternary mixtures using a 2³ full factorial design and the results were examined using analysis of variance (ANOVA) and Tukey's honest significant difference (HSD) tests. At a low concentration of the heterocyclics, CBZ and DBT (5 mg L^-1 each), the degradation of the PAH, FLU, was significantly enhanced (from 81 ± 1% to 93 ± 0.3%) when its concentration was increased from 5 to 30 mg L^-1. The full factorial design can provide valuable insights into substrate interaction effects in mixtures.